Hire CAD designers & engineers in Chester, England

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient c... Read more

- Self-motivated, hard working designer utilising CAD and rendering to bring your products to life -Ability to manage my time effectively and balance fairly between contracts -Effective and effcient client communication to identify key targets for products and contracts

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but h... Read more

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but have experience of many areas relating to product design.

An experienced designer in both product and technical fields who is passionate about all areas of manufacturing and product development. Knowledgeable in working in both start-ups and major companies,... Read more

An experienced designer in both product and technical fields who is passionate about all areas of manufacturing and product development. Knowledgeable in working in both start-ups and major companies, skills include understanding the importance of business acumen and customer service. Possesses a unique cultural background, having been brought up in Kuwait, and as a result excels working in diverse teams and relishes the opportunity to work with clients internationally. Academic studies have helped broaden an understanding of management theory and best-practice within the innovation and new product development space.

expert in shop drawing with Tekla Design Opal Mall in Tehran Mana project that was performed in Kerman

expert in shop drawing with Tekla Design Opal Mall in Tehran Mana project that was performed in Kerman

A hugely experienced project engineer with over 17 years concentrated in highly regulated engineering activities in aerospace and experimental fields. I have worked with engineering drawings and tec... Read more

A hugely experienced project engineer with over 17 years concentrated in highly regulated engineering activities in aerospace and experimental fields. I have worked with engineering drawings and technical data from the shop floor to the design office, I understand fully the standards, materials and egonomics needed to fulfill the specification and requirements of the task. I have a wealth of experince understanding complex mechanical engineering tasks and can validate designs requiring stress (FEA) analysis.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross... Read more

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross bikes and pushing the Fusion 360 software to its limits.

UK-based CAD designer with a Mechanical Engineering degree. Have prior experience with injection moulding, composite moulding, jig and fixture design. Paying attention to detail allows to notice poten... Read more

UK-based CAD designer with a Mechanical Engineering degree. Have prior experience with injection moulding, composite moulding, jig and fixture design. Paying attention to detail allows to notice potential defects before they become a major issue. When creating a design, I consider not only its integrity and functionality, but also factors like as machinability, ergonomics, and cost-efficiency.

ARCHITECT Expert in: residential architecture( 10 years), interior design( 8 years). Advanced in: landscape design( 2 years), furniture design( 4 years). TAILOR-made SMART design solutions with g... Read more

ARCHITECT Expert in: residential architecture( 10 years), interior design( 8 years). Advanced in: landscape design( 2 years), furniture design( 4 years). TAILOR-made SMART design solutions with good sense for proportion, colour and texture.

Architect designer I understand this industry and I know what I need to do to accomplish its business objectives.

Architect designer I understand this industry and I know what I need to do to accomplish its business objectives.

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which inclu... Read more

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which include: an aerospace landing mechanism, a turboprop propeller with gears and casing, and a Cessna 172 wing with various wing tip designs. Whilst on my 15 month industry placement, working for a precision engineering company, I would use SolidWorks on a daily basis in order to create a 3D model from an engineering drawing. Modifications would often be needed to the model in order for the part to be machinable on the CNC machines.

Computer-aided design skills. Extensive machine experience. Working with 3D printers. BEng in mechanical engineering.

Computer-aided design skills. Extensive machine experience. Working with 3D printers. BEng in mechanical engineering.

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - High End Consumer Products - Low-Cost Consumer Products - Power Tools I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Prototyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practiced creative skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.

ARB-registered architect and visualisation lead based in London, with a background spanning superyacht, aviation, hospitality, and high-end residential interiors. Studio experience at Winch Design and... Read more

ARB-registered architect and visualisation lead based in London, with a background spanning superyacht, aviation, hospitality, and high-end residential interiors. Studio experience at Winch Design and Rive Gauche London built the 3D production foundation that now underpins a hybrid pipeline combining 3ds Max, V-Ray, Corona, and Unreal Engine 5 for production-grade CGI and VR, with ComfyUI generative workflows layered in to accelerate iteration cycles, expand material exploration, and push visual outcomes beyond what traditional rendering delivers alone. Having spent years delivering high-stakes visuals where materiality and spatial precision are non-negotiable, I moved into integrating generative AI to expand the range of what is possible with architectural rigour: broader creative exploration, and a pipeline that keeps the architect in control of the outcome. Currently building retainer-based AI R&D partnerships with CGI and architectural studios looking to integrate generative workflows into their production pipelines, bringing both the technical depth to build them and the design sensibility to make them studio-ready from day one. Technical stack: 3ds Max · V-Ray · Corona · Unreal Engine 5 · ACEScg · Photoshop · InDesign · Premiere Pro · Virtual Reality (VR) · Meta Quest 3 · ComfyUI · Text-To-Image (T2I) · Image-To-Image (I2I) · Text-To-Video (T2V) · Image-To-Video (I2V) · ControlNet · LoRA Training · In/out-painting · Prompt Engineering · Flux 1D · Flux 2 Klein · Qwen · Wan 2.2 · Kling 3.0 · Seedance 2.0

I am a professional CAD Technician, with working experience within Infrastructure, Structural and Architectural practices. I specialise in Home Design, converting hand drawings and PDFs into CAD and R... Read more

I am a professional CAD Technician, with working experience within Infrastructure, Structural and Architectural practices. I specialise in Home Design, converting hand drawings and PDFs into CAD and Revit, Drainage and Construction Issues.

Experience as MEP Modeller with Intel. Any design you can imagine I can perform, any Product and Building design and rendering. Experience in HVAC design, architectural. Got powerful portable works... Read more

Experience as MEP Modeller with Intel. Any design you can imagine I can perform, any Product and Building design and rendering. Experience in HVAC design, architectural. Got powerful portable workstation for amazing renderings.

Highly motivated and dynamic BEng Civil and Structural Engineering graduate, who demonstrates an innate adaptability to meet client priorities and set goals. With a strong passion for 3D Modelling & C... Read more

Highly motivated and dynamic BEng Civil and Structural Engineering graduate, who demonstrates an innate adaptability to meet client priorities and set goals. With a strong passion for 3D Modelling & CAD, I am a creative innovator who enjoys using my technical mind to design structures, solve problems and shape the world around me. My software experiences include AutoCAD, Revit, Meshmixer and Fusion 360. With a passion for continually developing my strengths and abilities, I complete tasks to the highest standard, with attention to detail. I am a strong communicator who can foster the key relationships required to achieve success. Having undertaken several summer placements and design experiences, I am equipped with the technical skills required to meet client requirements.

Hi there! I'm an 18 year old self taught hard surface modeller from London who's aspiring to work in the vfx industry upon completing my portfolio. I very much enjoy 3D modelling and using kit-bash as... Read more

Hi there! I'm an 18 year old self taught hard surface modeller from London who's aspiring to work in the vfx industry upon completing my portfolio. I very much enjoy 3D modelling and using kit-bash assets to create renders of my own. Right now I mainly use blender for my 3D models, as that's the 3D modelling software i'm most proficient in, however I am slowly transitioning to using Maya and Arnold for some of my renders. Feel free to contact me if you have any queries or proposals!

I am an artist with years of experience and a passion for sculpture. I have become expert in ZBrush and 3d printing. I managed a 3d printing company in London. My main specialisation is bust portraitu... Read more

I am an artist with years of experience and a passion for sculpture. I have become expert in ZBrush and 3d printing. I managed a 3d printing company in London. My main specialisation is bust portraiture.

I have 15 years experience in the commercial design industry. I am calm under pressure and meet very tight deadlines. I look at each project with a fresh approach, listen to the clients hopes and... Read more

I have 15 years experience in the commercial design industry. I am calm under pressure and meet very tight deadlines. I look at each project with a fresh approach, listen to the clients hopes and give an individual response to the given project.

TJD engineering design was born from a passion for good engineering and great design. Founded by Thomas Dachtler an engineer with a background in motorsport and machine automation. We are dedicated to... Read more

TJD engineering design was born from a passion for good engineering and great design. Founded by Thomas Dachtler an engineer with a background in motorsport and machine automation. We are dedicated to producing high quality products and mechanical systems.

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing... Read more

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing company and in a reputable engineering consultancy doing work for many of their international clients and always subjected to high quality standards. I'm offering my expertise and skills to help you develop your projects from concept to reality. Client satisfaction is my priority.

Welcome to the realm of boundless creativity and innovation, where imagination takes form and dreams come to life. I am Marian Gabriel Alfons, a seasoned 3D designer with over 8 years of experience i... Read more

Welcome to the realm of boundless creativity and innovation, where imagination takes form and dreams come to life. I am Marian Gabriel Alfons, a seasoned 3D designer with over 8 years of experience in the realm of digital artistry, specializing in mesmerizing 3D modeling and cutting-edge product design. 🎨 Unleashing Creativity with Precision: Armed with an extensive arsenal of CAD programs including Solidworks, Autodesk Inventor, and Fusion 360, I orchestrate symphonies of precision and ingenuity. From conceptual sketches to intricate mechanical designs, I bring visions to reality with meticulous attention to detail. 🔧 Mastering the Tools of Innovation: With a deep-rooted understanding of industry-leading software, I navigate the intricate landscapes of 3D modeling with finesse and expertise. Each project is a testament to my dedication to craftsmanship, as I seamlessly blend artistry with functionality. 🖌️ Sculpting Souls with Digital Brushes: Delving into the realms of Zbrush, Maya, and Blender, I transcend traditional boundaries to sculpt digital masterpieces that captivate the imagination. Whether it's character design, architectural visualization, or cinematic animation, I breathe life into every pixel with passion and precision. 🌐 Bridging Vision with Reality: Collaboration lies at the heart of my process. I work closely with clients, transforming their visions into tangible blueprints and prototypes. Through clear communication and unwavering dedication, I ensure that every project exceeds expectations and delivers unparalleled results. 🚀 Empowering Innovation: In a world driven by innovation, I am committed to pushing the boundaries of what's possible. Whether it's revolutionizing product design, enhancing user experiences, or pioneering new technologies, I embrace challenges with enthusiasm, turning obstacles into opportunities. Embark on a journey of creativity and innovation with me. Together, we'll unlock the full potential of your ideas and shape a future limited only by imagination.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

3D designer with six years industry experience working in both the retail and military sectors. I am fully versed in creating realistic models in 3Ds Max for use as either visualisations, animations o... Read more

3D designer with six years industry experience working in both the retail and military sectors. I am fully versed in creating realistic models in 3Ds Max for use as either visualisations, animations or for real-time applications. As a Fine Art graduate, I am skilled at creating compelling imagery to best illustrate a concept. Currently working full time in-house as a 3D Media Developer for Babcock on a naval contract but seeking other opportunities to utilise my skillset outside of working hours. In my previous roles at Kantar Consulting, I have successfully led real-time projects for bluechip clients including Unilever, L'Oreal, Duracell, Shell, Alliance Japan to name a few. This included managing internal and external resource, scoping out timelines, liaising with the client, and ensuring that the end product met their requirements.