Hire BOM Designers in United Kingdom

Mechanical Engineering Background from Vehicle Technician to BEng Mechanical Design Engineer Based Around Automotive and Autosport Applications

Mechanical Engineering Background from Vehicle Technician to BEng Mechanical Design Engineer Based Around Automotive and Autosport Applications

Mechanical design professional with over 19 years of experience in Research and Development automotive and off-highway automotive industries. Drove improvements in design & development processes, focu... Read more

Mechanical design professional with over 19 years of experience in Research and Development automotive and off-highway automotive industries. Drove improvements in design & development processes, focusing on cost optimization, poke yoke, and enhancing productivity, leading to improved operational performance and cost efficiency. Hands on experience in automotive product design in Body-in-white interior / exterior design, trim, floor mat, roof, seating, front grill, mirror, wiper, glass, windscreen & rubber/ plastic components. Good exposure to Cad software like Solidedge, CATIA V5/6, NX, PDM, and PLM Matrix like Enovia, Team-Centre, Citrix & Sys-Pro tools. Taking full responsibility of assigned project. Looking after Truck Cabin packaging, Support vehicle build, supplier discussion and component testing. Releasing bill of materials using Teamcenter (PLM) & BOM structuring.

Senior Mechanical Design Engineer with 17+ years of experience developing mechanical components, assemblies and industrial equipment for energy and high-reliability engineering environments. Speciali... Read more

Senior Mechanical Design Engineer with 17+ years of experience developing mechanical components, assemblies and industrial equipment for energy and high-reliability engineering environments. Specialised in SolidWorks 3D CAD modelling, parametric part design, complex assemblies, and production-ready engineering drawings with GD&T. I support clients with the development of mechanical designs from concept through to manufacturing documentation including: • 3D CAD modelling and parametric part design • Assembly design and exploded views • Detailed manufacturing drawings with GD&T • BOM development and engineering documentation • 2D drawing to 3D model conversion • Reverse engineering from drawings or images • Design for manufacturability (DFM) I have delivered engineering solutions for projects across the energy, subsea, drilling and nuclear industries, producing robust and manufacturing-ready designs to professional engineering standards. Available for freelance mechanical design, CAD modelling and engineering documentation projects.

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial C... Read more

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial College London, a globally top-10 university. My capabilities include but are not limited to: - Product Design (hand sketches/design conceptualization) - Consulting and Recommendations for Design for Manufacturability, Material Selection, and Manufacturing Methods - Design for Manufacturing – Injection Molding, CNC Machining, Forming, Casting, etc. Mold Design - 3D Modeling - Sheet Metal (3D Model and DXF Files with bends and cut lines) - 3D Simulation and Analysis (stress/strain/fluid flow/volumetric analysis/fatigue analysis/center of gravity/etc.) - Dynamic Motion Simulation - 3D Renderings (Photo Realistic) - 2D Engineering Drawings (ASME Y14.5 Standard) - Assembly Drawings with BOM (Bill of Materials) - Design Specification Drawings - Tech Packs I have launched a freelance mechanical design engineering practice, StellarForged, working with a diverse range of clients—from small startups to established companies. Whether you're tackling a fundamental engineering challenge or navigating a complex problem, I provide the expertise and support needed to drive your success. https://stellarforged.com/

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

I am an experienced Solidworks certified Professional and have been using AutoCAD LT for nearly 20 years. I have the latest releases of both Solidworks & AutoCAD LT and can offer the following design... Read more

I am an experienced Solidworks certified Professional and have been using AutoCAD LT for nearly 20 years. I have the latest releases of both Solidworks & AutoCAD LT and can offer the following design services for my clients: 3D Models/Renders 3D Concepts for presentation 2D Assembly drawings BOM Creation 2D to 3D Conversion Paper to CAD conversions DWG & DXF files supplied for laser and water jet cutting Component drawings I also specialise in industrial packaging design and lineside manufacturing. I have spent many years advising and working alongside clients to provide creative, cost effective and practicle solutions. I like to work very much hands-on with my clients and will keep you updated frequently in order to minimise the need for revisions. My hourly rate is $60. My availability can be adjusted to suit your projects requirements. I normally work 8-5 (GMT). UK based.

Freelance CAD design engineer providing comprehensive CAD, 3D modelling, 3D visualisation, design and drafting services for companies and individuals. All work is produced to the highest standards us... Read more

Freelance CAD design engineer providing comprehensive CAD, 3D modelling, 3D visualisation, design and drafting services for companies and individuals. All work is produced to the highest standards using the latest 2D & 3D computer aided design software. The following is a guide to services provided, for more details please contact me. 2D Drawing & Detailing: • Paper to CAD services • Concept drawings • Technical illustration documents • Building layouts & spatial planning • Planning application drawings • Fabrication & manufacturing drawings • Assembly diagrams / BOM • Steelwork detailing 3D CAD Modelling: • 2D to 3D Conversions • 3D Conceptual Modelling • BIM (Bricscad) • Physical component conversion into 3d models 3D Rendering & Animations: • Technical 3D Visualisations • Product Rendering • Architectural rendering • Interior rendering • 3D Assembly and walk through animations • Photo realistic rendering Industries Served: Architecture Interior Design Manufacturing Marketing Fabricators Furniture Design Design areas previously worked in: • Product design / Industrial Design • Industrial steel doors • Material handling • Structural steelwork, latticed portal frame buildings • Electronics enclosures • Furniture design • Mechanical machinery guarding • Interior design, space planning • Architectural metalwork fabrications • Packaging • Automotive • Tooling design • Sheet metal-work design

With more than 29 years working in engineering environments, I have gained extensive experience in designing and developing products for the Defence, Space, and Automotive industries. Over the past f... Read more

With more than 29 years working in engineering environments, I have gained extensive experience in designing and developing products for the Defence, Space, and Automotive industries. Over the past five and a half years, I have contracted my skills and services to SMEs and Start-ups, delivering immediate value as an engineer who understands broader business needs, project planning, and BOM control. I am adept at building relationships and communicating effectively with multi-disciplinary teams and manufacturing personnel. My personal interest and deep understanding of Computer-Aided Design (CAD) have consistently benefited my work in engineering environments. I have extensive experience utilizing industry-leading CAD software, including Pro/ENGINEER, CREO, and SolidWorks, over many years. This hands-on practice has enabled me to deploy these tools effectively within business settings, optimizing design workflows and supporting project objectives. Through my career I have successfully designed and drafted Weldments, Large Structures, Castings, Machined components, Plastic Components, Sheetmetal components, Cable Assemblies, Modules, General Assemblies, Jigs and Fixtures. Product Portfolio: Metal Detectors, Conveyor Reject Systems, Bespoke Machinery, Manual Welding Guns, Robotic Welding Guns, Large format Touchscreens, Slip-rings, Encoders, Resolvers), Rotational interfaces, WAV conversion kits for new vehicles, GEO/MEO/LEO Large Dish Antenna systems.

I’m a Certified SolidWorks Professional with over a decade of experience in the automotive industry, specializing in turning ideas into fully manufacturable products. From advanced surface modeling to... Read more

I’m a Certified SolidWorks Professional with over a decade of experience in the automotive industry, specializing in turning ideas into fully manufacturable products. From advanced surface modeling to reverse engineering, I’ve helped shape the design language of next-generation vehicles, blending form, function, and feasibility. My core skills include: 3D CAD Design & Drafting (SolidWorks, AutoCAD, Fusion 360) Advanced Surface Modeling for complex aesthetic and aerodynamic components Reverse Engineering to optimise cost, performance, or supplier workflows Photorealistic Rendering & Visualization using KeyShot Manufacturing-Ready Documentation including GD&T, drawings, and BOMs Whether you're looking for a fresh concept, a production-ready model, or high-quality visual assets, I bring precision, creativity, and industry-grade expertise to every project.

Architectural Technician and Draughtsman with 9+ years of experience in architectural design, technical detailing, and construction supervision. Skilled in producing general arrangement drawings, fabr... Read more

Architectural Technician and Draughtsman with 9+ years of experience in architectural design, technical detailing, and construction supervision. Skilled in producing general arrangement drawings, fabrication details, BOMs, and NC files using Advance Steel, Revit, and AutoCAD. Holds SMSTS, CSCS, and First Aid at Work certifications. Proven ability to support design development, coordinate with engineers and contractors, and deliver accurate technical documentation across residential, commercial, and industrial projects.

I am an MSc Aerospace Engineering graduate from the University of Leicester (UK) with hands-on experience in SolidWorks 3D CAD modelling, Siemens NX, AutoCAD, Autodesk Inventor, ANSYS FEA structural a... Read more

I am an MSc Aerospace Engineering graduate from the University of Leicester (UK) with hands-on experience in SolidWorks 3D CAD modelling, Siemens NX, AutoCAD, Autodesk Inventor, ANSYS FEA structural analysis, STAR-CCM+ CFD aerodynamic and thermofluids analysis, DFMA, GD&T, BOM creation, and detailed engineering drawing production. During my aerospace internships I designed mechanical components and assemblies from concept through to production-ready documentation, conducted FEA and CFD analysis for structural and aerodynamic validation, produced full manufacturing drawing packs, and collaborated with engineering and manufacturing teams to deliver projects on time and to quality standards. I am available for freelance CAD design, engineering drawing production, FEA simulation, CFD analysis, and mechanical product development projects. I deliver accurate, professional, well-documented engineering outputs to tight deadlines.

Hi, I’m Suraj, a Mechanical CAD & Manufacturing Engineer with 3+ years’ experience supporting CNC/VMC machining, process improvement, and production-ready CAD. I specialise in SolidWorks modeling, jig... Read more

Hi, I’m Suraj, a Mechanical CAD & Manufacturing Engineer with 3+ years’ experience supporting CNC/VMC machining, process improvement, and production-ready CAD. I specialise in SolidWorks modeling, jigs & fixtures, assemblies, and detailed 2D drawings (DWG/DXF/PDF) with GD&T and DFM/DFMA so parts are easier to make and inspect. I can support projects like: Fixture/jig design for machining, bending, welding, and assembly 3D modeling + 2D manufacturing drawings (GD&T, notes, inspection points) DFM/DFMA reviews to reduce cost and rework File conversions: STEP/IGES/STL, DWG/DXF, PDF Optional KPI/production dashboards (Power BI) for manufacturing visibility Deliverables: SolidWorks parts/assemblies, STEP/IGES/STL, DWG/DXF, drawing PDFs, BOM support, and fixture/die concepts for machining and bending operations. Message me with your sketch/PDF/part photos and requirements, I’ll respond quickly with a clean plan and deliverables.

🎯 Senior Product & Tooling Design Engineer | 21+ Years in Automotive & Off-Highway | BIW Fixtures | Interior Trims | Stamping | Automation Tooling | Team Leadership I’m a mechanical design engineer w... Read more

🎯 Senior Product & Tooling Design Engineer | 21+ Years in Automotive & Off-Highway | BIW Fixtures | Interior Trims | Stamping | Automation Tooling | Team Leadership I’m a mechanical design engineer with over 21 years of experience in BIW fixtures and Stamping, automotive interior trims, off-highway tooling, and now, automation gripper tooling for assembly lines. My work spans major industry leaders and platforms including Ford U502, JLR (L460, L461, L481), GMD T.33, and Caterpillar, where I’ve delivered end-to-end engineering — from concept modeling to final CAD, BOM, and manufacturing release. 💼 Key Highlights: • Delivered complete BIW fixture projects (Geo Stations, Re-spot, Grippers, Turntables) for JLR, Gestamp, GMD, managing CAD release, offshore support, and simulation coordination. • Experienced in stamping tool design for BIW panels — including progressive tool layout, 3D modelling, 2D detailing, and feasibility validation. • Led the interior trim development for Ford U502, supporting Class A to B-surface translation, part attachment design, and packaging resolution — aligned to FC3 through FDJ milestones • Designed tooling for the Meritor Brake Assembly Automation Line, including grippers, nut runner tools, and press fixtures — selecting commercial actuators, sensors, and developing modular tool concepts • Applied DFM/DFA and GD&T principles; participated in DFMEA preparation for safety-critical and complex mounting structures • Recognized with a Spot Award at Infosys for improving First Time Right (FTR) drawing quality from 75% to 93% on a major Caterpillar Off-Highway tooling project, through process standardization and rigorous quality control. • Proficient in CATIA V5, NX, Creo, SolidWorks, Solid Edge, AutoCAD, and Teamcenter for PLM and CAD lifecycle management • Known for mentoring junior engineers, leading quality checks, and ensuring robust delivery under tight timelines 🔄 Known for solving complex design challenges, mentoring teams, and consistently delivering quality-first, CAD-intensive solutions with a strong focus on process and client satisfaction. 📍 UK-based

I am a vibration and FEA expert with 10 years of professional experience. I hold a PhD in Structural Dynamics and I am a Chartered Mechanical Engineer (CEng MIMechE). I diagnose vibration issues, vali... Read more

I am a vibration and FEA expert with 10 years of professional experience. I hold a PhD in Structural Dynamics and I am a Chartered Mechanical Engineer (CEng MIMechE). I diagnose vibration issues, validate structures with FEA, and optimise mechanical designs for strength, durability, and reliability using advanced engineering simulations. I deliver clear reports, data-driven insights, and practical recommendations, giving you the confidence to make safe and efficient engineering decisions. ⚙ Vibration Engineering & Dynamic Analysis ⚙ ✔ Vibration troubleshooting & resonance control: resonance mapping, mode tuning, root-cause diagnostics ✔ Modal analysis, EMA/OMA & testing: damping estimation, mode-shape interpretation, shaker campaigns, sine/random vibration, shock testing ✔ Signal processing & data interpretation: accelerometer-based insights, FFT, waterfalls, envelope methods, feature extraction, spectral analysis, DAQ and test-setup planning ✔ Python for vibration analysis: automated diagnostic pipelines and ML-based anomaly detection ✔ R&D support and development of clients’ in‑house vibration analysis capability ✔ Design optimisation for vibration performance: stiffness tuning, mass distribution, damping and dynamic response refinement ⚙ FEA: Static, Transient & Fatigue Analysis ⚙ ✔ FEA for structural integrity: strength, stiffness, stability, and deformation under realistic loading ✔ Transient FEA: impacts, shocks, rapid load changes, and start-up/shutdown events ✔ Non-linear FEA: contact, plasticity, material nonlinearity, and large-deformation behaviour for complex structures ✔ Fatigue & durability prediction: stress-life and strain-life methods to reduce failure risk and extend service life ✔ Design optimisation: eliminate hotspots, improve stiffness, and increase overall reliability ✔ Salome_Meca, Code_Aster and Paraview user ⚙ Rotordynamics & High-Speed Machinery FEA ⚙ ✔ Critical-speed and stability assessment for pumps, compressors, turbines, and other rotating machinery ✔ System-level rotordynamics evaluation: Campbell/Bode analysis and run-up / coast-down behaviour for multi-stage rotors, pump trains, and rotor-bearing systems ✔ FEA for rotating components: blades, impellers, rotors, couplings, and high-speed assemblies assessed for stiffness and deformation control ✔ FEA for static components: casings, housings, pump volutes, bearing pedestals, and structural frames analysed for load transfer, thermal effects, and long-term reliability ✔ Design refinement for rotating machinery: mass-stiffness balancing, blade/impeller geometry tuning, and structural improvements that enhance performance and reduce maintenance issues ⚙ CFD (Computational Fluid Dynamics) ⚙ ✔ Flow performance analysis: pressure, velocity, and flow-distribution insights for ducts, manifolds, nozzles, and mechanical systems ✔ CFD for pumps & turbomachinery: impeller/volute flow behaviour, hydraulic efficiency, cavitation risk, and blade-passage optimisation ✔ Pressure-drop & flow-resistance evaluation: system-level assessments to reduce losses and improve efficiency in pipework and mechanical assemblies ✔ Design improvements from CFD results: geometry adjustments, smoother flow paths, reduced recirculation, and enhanced performance ✔ OpenFOAM user ⚙ CAD / Mechanical Design Modifications ⚙ ✔ Structural refinement & geometry optimisation: ribbing, filleting, thickness tuning, load-path improvements, and mass redistribution to eliminate stress hotspots ✔ CAD updates: translating engineering recommendations directly into updated CAD models ⚙ What I Bring to Your Project ⚙ ✔ Highest engineering standards – I adhere to recognised engineering codes of ethics and avoid pirated software, half-ready solutions, or any practices that could compromise your project. ✔ Clear communication & responsiveness – fast replies, transparent progress updates, and clear explanations of technical topics. ✔ Actionable outputs & implementation support – practical recommendations you can apply immediately, plus guidance during and after the project. ✔ Reliable delivery – on time, within budget, and to the agreed technical quality. ⚙ Typical Deliverables ⚙ ✔ Action-oriented engineering reports – clear conclusions, safety margins, and practical recommendations (typically 5–12 pages, concise and decision-ready). ✔ Vibration & rotordynamics outputs – Bode/Campbell diagrams, frequency spectra, waterfall plots, and ODS/modal shapes with safe-operating ranges and tuning advice. Typical outcome: vibration reductions of 40–70% in problematic speed bands after design, support, or balance adjustments. ✔ FEA results & design changes – stress/fatigue plots, modal frequencies, safety-factor maps, stiffness checks, and targeted geometry up ➡️ Get in touch if you’d like an initial review of your vibration or FEA challenge — we can discuss the best approach by chat or jump on a short intro call ➡️

I am a Structural Steel Detailer with experience in metal fabrication and structural engineering. I create accurate shop drawings, assembly drawings, and single-part drawings for steel structures incl... Read more

I am a Structural Steel Detailer with experience in metal fabrication and structural engineering. I create accurate shop drawings, assembly drawings, and single-part drawings for steel structures including PEMB (pre-engineered metal buildings), mezzanines, canopies, staircases, and handrails. What I deliver: - Shop drawings / fabrication drawings (PDF + DWG) - General arrangement (GA) drawings - Bill of Materials (BOM) and cut lists - DXF files for CNC plasma/laser cutting - AISC-compliant detailing Software I use: - AutoCAD (2D detailing) - SolidWorks (3D modeling) - ASCON Kompas 3D (3D modeling) I follow AISC and AWS D1.1 welding standards. I communicate clearly in English and meet deadlines. Let me know your project needs — I will provide a quote within 24 hours.

I have worked with top engineering firms, such as Rolls-Royce, Bombardier, and Vanderlande. I have designed automation systems and certified compliance for CE marking across multiple 6- to 9-figure pr... Read more

I have worked with top engineering firms, such as Rolls-Royce, Bombardier, and Vanderlande. I have designed automation systems and certified compliance for CE marking across multiple 6- to 9-figure projects. These projects have challenged me and taught me a lot of lessons, giving me in-depth experience with complex automation systems. I can bring a wealth of experience gained over a decade in the engineering industry to benefit UK manufacturers. In 2013: I didn’t get the grade to continue my maths A-level - I decided to learn at home & pursue engineering. In 2014: I started at Rolls-Royce Control Systems as a year in industry student - Successfully passing my Maths A-level. In 2019: I gained my MSc Mechatronics Degree - Multiple internships returning to Rolls-Royce across departments. In 2023: I gained my Certified Machinery Safety Expert Qualification - After years of working as an Electrical Controls Engineer. I have produced electrical schematics using ePlan and SolidWorks Electrical, I have written code for Siemens PLCs, programmed safety logic utilising safety relays, and I have mentored other engineers to become proficient with automation technology, allowing businesses to deliver advanced machinery and grow their automation capability. Here's how I can help you: 1. Follow me on LinkedIn 2. Eplan Electrical Design, 3. Siemens TIA Portal PLC Programming, 4. Machinery Safety/CE Marking Consultancy 5. Automation Project completion for optimising manufacturing operations

Hi, I'm David Orija. I'm a firm believer in product design's effectiveness in driving business growth, elevating a brand, and creating a good impact at scale. 5+ years experience designing consumer p... Read more

Hi, I'm David Orija. I'm a firm believer in product design's effectiveness in driving business growth, elevating a brand, and creating a good impact at scale. 5+ years experience designing consumer products for businesses ranging from Fortune 500 multinationals to new tech start-ups. I am skilled in CAD design for manufacturing and CNC programming.

Nader Al-Khatib currently works for the mechanical engineerization of industrial plants with Qs 9000, Avsq’94, Vda 6.1, and Eaqf. Quality standards, and NAAMS, ATEX and FOOD design standards. His main... Read more

Nader Al-Khatib currently works for the mechanical engineerization of industrial plants with Qs 9000, Avsq’94, Vda 6.1, and Eaqf. Quality standards, and NAAMS, ATEX and FOOD design standards. His main activity involves designing complex assembling and feasibility study of industrial machinery, mainly automotive (Magneti Marelli, Comau, PSC, FCA, Joyson Safety Systems ). He merges those skills and knowledge in CATIA and SOLIDWORKS and NX with his coding skills with which he performed high automation tasks regarding assembly variational parametrization, CAD Macro, API, automatic BOM, Barcode Documentation traceability and Software for CAD support. His experiences with FFS 3D printers CAM and CN machines had brought a profound boost in R&D manufacturing procedures, and in synergy with the 14001 OHSAS Course, he organized production processes and quality checkpoints; his fluent and technical English was used in abroad tasks both for representative and technical/design purposes. Lecturer at Eurlink Srl, where he teaches classes and private lessons in cad, CAM, 2D drawing and fundamental rules for mechanical design. He independently prototyped and patented an electronic device to balance accumulators with lithium-polymer chemistry with the EPO's highest rating. Due to the skills required for this project, he learned many coding languages (C\C++, VB, Phyton) and acquired perfect knowledge and understanding of electronics principles, schematics and datasheets. He had administrative roles and is currently vice-president in an Innovation laboratory where he is a Drone and 3D Printing Expert. He organized and taught “prototype programming courses” aimed at students, teachers, and companies for the sake of spreading digital culture. He also organized speeches at many local and international conferences and collaborated with MIT to organise the FabAcademy Master Course; in his past administrative roles, he learned to make complex and under-pressure choices with a high sense of responsibility. He is president of an amateur sports association where he learned how relationships between people are essential in working and philanthropic projects.

I am a multidisciplinary CAD services specialist providing high quality, professionalism, cost effective and affordable design & draughting solutions. I can offer 2D and 3D CAD Design services using (... Read more

I am a multidisciplinary CAD services specialist providing high quality, professionalism, cost effective and affordable design & draughting solutions. I can offer 2D and 3D CAD Design services using (AutoCAD & SolidWorks) Softwares. I can offer technical drawings, part drawings, assemblies and bill of materials, rendering and animation of the parts or assembly illustrating its design interface and functioning. Services Offered are as follows. - Paper to CAD Conversions - 3D Modelling - Reverse Engineering - CAD Conversions - 2D CAD Drafting - Mechanical Engineering Drawings - 2D Floor Plans elevations. Area Covered: Midlands and Nationwide Work Experience ----------------- Summary: I have 4 years of experience of using 2D and 3D CAD design in manufacturing industry. Having both designed and produced metalwork, I offer services where I understand the actual realisation of products from designs and drawings. Attachment portfolio will provide you better understanding of the kind of projects I've involved in. Solidworks key working areas - 3D Modeling - Photo realist renders - 3D animation and storyboard - Assembly models, drawings, BOMs - 2D sketch, drawings to BS8888 clean and tolerance stacked - Sheet metal - FEA Static Design Validation - Document control (PDM) AutoCAD - Creation of layers - BOM - Manipulate CAD for Data - Floor Plans and Elevations

- Structural analysis and design. - RC and Steel structure complete detailing. - Quantity surveying. - Structural integrity/ assessment on buildings. - Grading and pavement designs with complete drawi... Read more

- Structural analysis and design. - RC and Steel structure complete detailing. - Quantity surveying. - Structural integrity/ assessment on buildings. - Grading and pavement designs with complete drawings. - Fabrication drawings with complete assembly, cutting details and BOM.

Professional engineer, a RAeS Associate Member with a sound knowledge of the Aerospace and Mechanical industry. I have demonstrated strong problem solving skills and gained integrity through various p... Read more

Professional engineer, a RAeS Associate Member with a sound knowledge of the Aerospace and Mechanical industry. I have demonstrated strong problem solving skills and gained integrity through various positions. I have worked in cross functional and multicultural teams in challenging environments. I managed designs and projects in different companies. • I designed 3D parts and detailed 2D drawings paying attention to GT&T • I worked with the PLM system, created Bill of Materials, associated data for prototype and product release • Modification of tooling, jigs and fixtures design • I created and updated BOM, design sketches, diagrams • I created and verified specification for packaging, external supplier specifications to provide standard cost structure and instructions for manufacturing • I created test requirements, trials orders, reports, concessions and permits • I liaised with suppliers and met military personals in France and Portugal for business meetings and training

I believe in ambition and balance. Engineering methods helped me to adapt my creativity into a path bound to technical and managerial duties. With the time, i’ve started to combine my backgrounds with... Read more

I believe in ambition and balance. Engineering methods helped me to adapt my creativity into a path bound to technical and managerial duties. With the time, i’ve started to combine my backgrounds with opportunities and market needs, embracing new experiences and industries.

As an Associate Member of the Institution of Mechanical Engineers (AM IMechE) I am studying towards becoming an Incorporated Engineer in hope of gaining a recognised IEng status. My professional ex... Read more

As an Associate Member of the Institution of Mechanical Engineers (AM IMechE) I am studying towards becoming an Incorporated Engineer in hope of gaining a recognised IEng status. My professional experience has focused on exposure to the design of mechanical components for manual & hydraulically operated valves in the Subsea & Topside Oil & Gas & Flood Defence Industries. Primarily, I use Autodesk Inventor for 3D Modelling and 2D Drafting of parts for manufacturability and assembly. I have a past experience of producing related calculations through the use of MathCAD for safe design of all parts in operation and a growing knowledge of FEA using Inventor for 3D Component Analysis. Other experience includes direct involvement with Sales, Production, Purchasing, Test & Assembly and with client meetings for project reviews and design updates. I aim to further my career by applying Design & Drafting support and sharing my growing knowledge of the products in order to benefit clients. I hope to make a beneficial impact by utilising Design Reviews and providing a solid structural method towards design inputs in order to help the work flow through numerous concurrent projects.

We produce 3D models of parts and Assemblies using the latest 3D software from your sketches, old drawings and ideas. This enables us to produce a complete set of 2D drawings of each part, including d... Read more

We produce 3D models of parts and Assemblies using the latest 3D software from your sketches, old drawings and ideas. This enables us to produce a complete set of 2D drawings of each part, including drawings of the assemblies, showing every detail required to produce each part and full construction of the finished design, complete with BOM's (Bill of Material's). Everything is linked, so if changes are required, everything updates so making the process that much quicker. For the client who is inventing a new product, we are able to print a solid 3D fully working prototype model of the product enabling you to hold it in your hands and test the product out, cutting out the traditionally expensive route of having prototypes built and reduce the time it takes to get the prototype in your hands. A matter of days, not weeks.

an industrial designer who loves new challenges

an industrial designer who loves new challenges

I am a Chartered Mechanical Engineer, educated to Master’s level in Mechanical Engineering. I am looking for any positions available for Mechanical Design with emphasis on BIM/CAD design. I have exper... Read more

I am a Chartered Mechanical Engineer, educated to Master’s level in Mechanical Engineering. I am looking for any positions available for Mechanical Design with emphasis on BIM/CAD design. I have experience working as a Mechanical Design Engineer within Infrastructure, mainly waste water treatment. I also have experience as a Design Engineer within Building and Biogas. I have mechanical engineering knowledge and skills, but I am an excellent Draftsman. I can model all aspects of plant, equipment and pipework in 3D and produce 2D drawings of GA’s, manufacturing drawings with BOM’s and P&ID’s. I have excellent skills on Solidworks, Revit, AutoCAD (with Plant 3D), Navisworks. My main strengths are in Piping and industrial design and site layouts. However, I am open to new challenges and feel I have the relevant skills and knowledge to be flexible and transferable. I am a professional and take pride in my work and I am only as good as my reputation and how happy my clients are. I look forward to working with you and providing you with excellent work and customer care.