I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am a mechanical engineer with experience in the field of autocad modelling for more than 12 years. I lead the design department in a workshop so it's almost my daily job 2d&3d.

I am is able producing Design Drawing / Tender Drawing / Coordination Drawing And As-Built Drawing. (Layout Plan,Section, Details, Schematic, for spare parts

I am is able producing Design Drawing / Tender Drawing / Coordination Drawing And As-Built Drawing. (Layout Plan,Section, Details, Schematic, for spare parts

I'm a Manufacturing Engineer, experienced in Mechanical Design and Manufacturing Engineering Field; I perform engineering design calculations and analysis techniques to support designing work. I'm a c... Read more

I'm a Manufacturing Engineer, experienced in Mechanical Design and Manufacturing Engineering Field; I perform engineering design calculations and analysis techniques to support designing work. I'm a certified as a SOLIDWORKS Mechanical Design (Expert) and advanced tools (Professional). I have a 5-years of experiences in Autodesk Inventor professional. I can provide long term engineering design support following project scopes and requirements.

A fresh graduate Civil Engineer with analytical skills, seeking the chance of gaining good experience, personal and professional skills, and sharing them with others.

A fresh graduate Civil Engineer with analytical skills, seeking the chance of gaining good experience, personal and professional skills, and sharing them with others.

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a... Read more

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a Professor of Structural Engineering. I am licensed as a Professional Engineer(PE). I am ready to stamp the drawings and calculation sheets with my USA PE stamp if needed. I have extensive experience +25 years of experience including the structural design and analysis of multi-story buildings using structural steel, reinforced concrete, post-tensioned and pre-stressed concrete, deep foundations, and structural masonry. I provided structural forensic studies and structural damage assessments throughout many locations around the world. I served as a credible expert witness and he analyzed and evaluated the cause of failures in a wide variety of structures, such as bridges, buildings, industrial structures, and metro stations under different extreme loading conditions. I am also registered as a structural consultant in the field of seismic assessment of existing buildings at the Applied Technology Council(ATC) of FEMA in California, USA. I work with my professional staff engineers who are into: 1. Excellent complete structural design competence for mainly reinforced concrete, steel, composite & and wooden structures; 2. In-depth knowledge of structural and civil codes (US & European Codes & Standards). 3. Assessment and evaluation the structural safety of the existing buildings; 4. Retrofitting design of un safe structures 5. Prepare the required studies and reports for repair, and strengthening of structures; and 6. Introducing others works related to structural engineering. We are using the most reliable computer software and comply with international codes and local standards, Please contact us for more details or any job inquiry you might have. We are professional, trustworthy, and reliable and offer quality service experience and a quick turn. Your prompt response will be highly appreciated. Note: We offer all engineering services at very competitive and special prices. Thanks & Regards, Structural Engineering Pioneers Bureau, SEPB

Civil Engineer, Athletic, Muay Tai, MMA, Swimming, Drifting, Civil & architecture program and Management Engineer

Civil Engineer, Athletic, Muay Tai, MMA, Swimming, Drifting, Civil & architecture program and Management Engineer

Civil Engineer familiar with various structural design and analysis programs. I always look forward to working on major projects and scientific development in my field of study.

Civil Engineer familiar with various structural design and analysis programs. I always look forward to working on major projects and scientific development in my field of study.

- education :bachelor mechanical engineering - worked in a company for manufacturing semitrailer,tanks,tippers and cement silos. - i designed 3 ton gantry Crane for submerged welding machine - i desig... Read more

- education :bachelor mechanical engineering - worked in a company for manufacturing semitrailer,tanks,tippers and cement silos. - i designed 3 ton gantry Crane for submerged welding machine - i designed also 5 ton rotating welding jig for 12 meter length semitrailer chassis - i designed also 12 ton bus maintenance hydraulic lifting device

i am a precast detailer worked or 11 years on different projects in Europe ,USA and the gulf area i can work with cad revit and also tekla structure

i am a precast detailer worked or 11 years on different projects in Europe ,USA and the gulf area i can work with cad revit and also tekla structure

I am an Architect since 1990 , Achieved the Following: ●BIM management Master Certified 2023 -Universität de Barcelona . ● ACAD 12 certificate from Kemet Training center (Autodesk authorized office)... Read more

I am an Architect since 1990 , Achieved the Following: ●BIM management Master Certified 2023 -Universität de Barcelona . ● ACAD 12 certificate from Kemet Training center (Autodesk authorized office), 1993. ● Revit Architecture 2012 from Cad Master Center (Autodesk authorized office) 2012. ● PMP 40 hour’s course from the Canadian chamber of commerce 2016-4th Edition. ● PMP 40 hour’s course from the PM Tricks-Eng. Sayed Mohsen - 2021-6th Edition. ● Scrum Fundamental Certified -2023– Degree: Proficient, ID:1560806; URL: https://c46e136a583f7e334124-ac22991740ab4ff17e21daf2ed577041.ssl.cf1.rackcdn.com/Certificate/ScrumFundamentalsCertified-HananYoussef-932030.pdf ● Autodesk Revit Structure -June2023 ● Bently Synchro 4D- 2023

I am a skilled professional in AutoCAD Civil 3D, GIS, and Remote Sensing, with experience in infrastructure design support, digital mapping, spatial data analysis, and building information modeling (B... Read more

I am a skilled professional in AutoCAD Civil 3D, GIS, and Remote Sensing, with experience in infrastructure design support, digital mapping, spatial data analysis, and building information modeling (BIM) using Autodesk software. I specialize in road alignments, grading, earthwork calculations, and utility network modeling, as well as GIS services including map digitizing, georeferencing, spatial analysis, and data conversion between CAD and GIS formats. I also apply remote sensing techniques to analyze geographic and environmental data, enhancing project accuracy and decision-making. I deliver high-quality work with fast turnaround, clear communication, and a strong commitment to meeting client requirements.

20 Years of experience in Oil&Gas and industrial projects structural engineering PMP Certified with exceptional skills in managing engineering teams

20 Years of experience in Oil&Gas and industrial projects structural engineering PMP Certified with exceptional skills in managing engineering teams

I’m Mahmoud Hassan, a civil engineer specialized in structural design and analysis. I work with programs like SAP2000, ETABS, SAFE, and AutoCAD to deliver precise structural drawings and designs. I ca... Read more

I’m Mahmoud Hassan, a civil engineer specialized in structural design and analysis. I work with programs like SAP2000, ETABS, SAFE, and AutoCAD to deliver precise structural drawings and designs. I can help you with structural modeling, concrete design, shop drawings, and revising existing plans. My goal is to provide accurate, well-detailed, and professional work that meets engineering standards and client expectations.

Review & checking of steel structure shop drawings (2D & 3D). • Providing clear technical comments and marked-up drawings. • Reviewing connections details, weld details, surface treatment & transporta... Read more

Review & checking of steel structure shop drawings (2D & 3D). • Providing clear technical comments and marked-up drawings. • Reviewing connections details, weld details, surface treatment & transportation limits. • Bill of Materials (BOM) verification. • Identifying errors, clashes, non-conformities (NCRs) and request for information (RFI). 1-Oil & Gas refineries. 2-Conveyor belt systems for transporting raw materials 3-Tanks, Silos and Sheet metal works. 4-Pre-Engineered Steel Buildings (PEB) for industrial, Warehouses, Commercial, Creational, Aviation Projects. 5-Extensive use of weld details, transportation limits, galvanize systems and international engineering codes. 6-Identify and report non-conformities (NCRs)and coordinate corrective actions with the various disciplines.

I am a civil structure designer I had been worked with all international codes and most of analysis programs & drawing . I have experience from work in Dubai , Saudi Arabia ,Egypt

I am a civil structure designer I had been worked with all international codes and most of analysis programs & drawing . I have experience from work in Dubai , Saudi Arabia ,Egypt

Structural engineer / bridge designer engineer. My responsibility is to modelling, analysing, design and submit approvals for a lot of bridges and corridors in Egypt as Luxor corridor, mokattam corrid... Read more

Structural engineer / bridge designer engineer. My responsibility is to modelling, analysing, design and submit approvals for a lot of bridges and corridors in Egypt as Luxor corridor, mokattam corridor, Aswan corridor, 26 July corridor and Elhadarat extension corridor. Having a respectfully experience in design and analysis manually and by using softwares that based on FEM as SAP, SAFE,ETABS,CSI column (CSI package), Midas , and a simple knowledge about Ram ,and BEM as (plpak), in addition to modelling and drafting software as CAD and REVIT. With a valuable knowledge in many codes as ECP,AASHTO LRFD, EUROCODE , and ASCE .

• Soliman is a professional consultant structural engineer with more than 20 years of extensive international experience in Egypt, France and Gulf Countries in the design, review and management of med... Read more

• Soliman is a professional consultant structural engineer with more than 20 years of extensive international experience in Egypt, France and Gulf Countries in the design, review and management of medium and mega scale projects, including prestressed and non-prestressed bridges, tunnels, Complex structures, Residential and office buildings. • Areas of proficiency include the Preparation types selection reports, Structural analysis, Conceptual, Preliminary and final design, in addition of preparation projects specifications, BoQ, plans and estimates. Valuable knowledge of international design codes and standards such as (AASHTO and ACI, Euro Code Euro Code UK, FR, DIN, Saudi M.O.T and MOMORA. Requirements and Egyptian code of practice for concrete structures). • Extensive experience in the use of different modelling and analysis software such as: CSI Bridge, SAP2000, ETABS, SAFE, ROBOT, DLUBAL, and STAAD PRO… • Through more than twenty years of experience in the Engineering and construction field, the following expertise was also acquired: - Team building & leading - Planning and cost control supervision - Client Coordination - Project Performance • Possess ability to successfully apply management skills and work closely with Contractors, Architects, Engineers, and Owners to plan and execute projects safely within established time and budgets while maintaining quality

A professional Steel structures Designer, +7 years experience teaching and Designing steel structures using different codes (ECP, AISC, AISI, BS & EC3)

A professional Steel structures Designer, +7 years experience teaching and Designing steel structures using different codes (ECP, AISC, AISI, BS & EC3)

My name is Arsanuos moawad,I am a civil Engineer have an experience in residential buildings,water projects and construction projects management professional at Auto desk auto cad 2D, Revit, Primaver... Read more

My name is Arsanuos moawad,I am a civil Engineer have an experience in residential buildings,water projects and construction projects management professional at Auto desk auto cad 2D, Revit, Primavera, Sap2000 and Ms office package.

My name is Mohamed Hamed and I'm a Civil engineer. I have designed large and small projects for residential, commercial, and industrial buildings, and I can provide various architectural and engineer... Read more

My name is Mohamed Hamed and I'm a Civil engineer. I have designed large and small projects for residential, commercial, and industrial buildings, and I can provide various architectural and engineering services to meet different needs My main qualities are drawing, conceptual designing, modeling and 3D rendering. Throughout my career, I have also gained experience working for a leading company that specializes in the design and creation of permanent and temporary architectural structures and fittings for indoor and outdoor use.

, My name is Mohamed Elgendy, I’m an Aeronautical Egyptian Engineer I am a passionate Aerospace Engineer who loves working in all the subjects involved in this field. I can provide good quality assist... Read more

, My name is Mohamed Elgendy, I’m an Aeronautical Egyptian Engineer I am a passionate Aerospace Engineer who loves working in all the subjects involved in this field. I can provide good quality assistance supporting it with programs such as SolidWorks, ANSYS, MATLAB, and AutoCAD.A clear understanding of technical Aircraft and systems and training in maintenance Engineering.

I have a bachelor's degree in civil engineering and have worked on several projects for 10 years. I am now working on AutoCAD technology and extracting executive drawings through remote work.

I have a bachelor's degree in civil engineering and have worked on several projects for 10 years. I am now working on AutoCAD technology and extracting executive drawings through remote work.

WE HAVE A TEAM REACHING ADVANCED LEVEL IN DESIGN ENGINEERING AND ALL SYSTEMS OF BUILDING ( BRIDGES AND BUILDINGS )

WE HAVE A TEAM REACHING ADVANCED LEVEL IN DESIGN ENGINEERING AND ALL SYSTEMS OF BUILDING ( BRIDGES AND BUILDINGS )

professional designer and detailer for steel structures. finite element modelling by Abaqus and Ansys. M.sc in civil engineering,steel structures designed several projects in Egypt and Qatar such as p... Read more

professional designer and detailer for steel structures. finite element modelling by Abaqus and Ansys. M.sc in civil engineering,steel structures designed several projects in Egypt and Qatar such as phosphat factory in El-Sokhna, new building in faculty of commerce, Ain Shams. The Dome of Parliamen in New capital. shop drawing for PLACE VENDOME ,LUSAIL - QATAR ENTERTAINMENT CITY. Structural Design and shop drawing for PEB projects

Foresight Academy is a Starting Freelance firm in Egypt that delivers innovative engineering solutions and quality outputs to our Clients. Moreover, with the aid of our team of dedicated professional... Read more

Foresight Academy is a Starting Freelance firm in Egypt that delivers innovative engineering solutions and quality outputs to our Clients. Moreover, with the aid of our team of dedicated professionals, we provide a full array of our Drafting, Modeling, Design & Planning services. Eventually to get maximum results for our Clients’ requirements. We are concerned with delivering all our clients projects with a competitive edge. Moreover by exploiting opportunities and overcoming risks assuring that projects are efficiently delivered through development, coordination and management.

I am a civil engineer who found his true passion in both steel and concrete design. I have a wide experience with all the CSI programs (SAP2000, SAFE, ETABS and CSI Column) and Autodesk programs (Aut... Read more

I am a civil engineer who found his true passion in both steel and concrete design. I have a wide experience with all the CSI programs (SAP2000, SAFE, ETABS and CSI Column) and Autodesk programs (AutoCAD, Revit structure). I have a very good command of both written and spoken English, and German. I am currently a BIM Structural Design Engineer at IAS Engineering Consultant Office, Kuwait that enjoys technology, designing with the European, American and Egyptian codes of practice. I am a very active participant when it comes to teamwork tasks. Excellent level of interpreting written documents and instructions. Easy understanding of procedures, rules and regulations, quick learner, great ability to work well with the public on a constant basis under stressful conditions. I established a Student Activity last till now in my Faculty that aims to keep students in track and focus how to learn new programs and become genius structural designers. I have a website (Advanced Designers) that collects all the Structural Engineer needs from all over the world to help him/her update him/herself to be more intelligent. My vision is to help in creating beautiful world by designing awesome and environment friendly buildings. I use my knowledge to help the others from undergraduate students in Civil and Architecture by giving them chance to learn how to express their ideas in software to make it easy to communicate with other engineers all over the world. I have Experience in Design and produce the Tender Drawings, Fabrication Drawings, and Calculation sheets according to various Design Codes to cover the clients needs and local authorities.

Eslam is an experienced steel designer and detailer with over 10 years of expertise in the steel industry. Proficient in AutoCAD, Revit, and various steel design software, Eslam specializes in structu... Read more

Eslam is an experienced steel designer and detailer with over 10 years of expertise in the steel industry. Proficient in AutoCAD, Revit, and various steel design software, Eslam specializes in structural steel detailing and connection design. With in-depth knowledge of international standards, including AISC and ANSI, Eslam ensures precision and compliance in every project. Their expertise spans from conceptual design to fabrication drawings, making them a valuable asset in steel construction and engineering.