Hire freelance 2D CAD Drafting Services designers near Alexandria, SJ

I am a Naval Architect and Marine Engineer specializing in ship design, boat design, yacht design, small craft design, hull modeling, stability analysis, hydrostatics, resistance, powering, propulsion... Read more

I am a Naval Architect and Marine Engineer specializing in ship design, boat design, yacht design, small craft design, hull modeling, stability analysis, hydrostatics, resistance, powering, propulsion, and marine CAD. I provide engineering support for small vessels, yachts, workboats, launches, and marine projects from preliminary design and calculations through technical drawings and engineering reports. My key services include: • Ship, Boat & Yacht Design • Hull Design, Modeling & Fairing using Rhino 3D • General Arrangement (GA) Drawings • Lines Plans and Marine CAD Drawings using AutoCAD • Hydrostatic Calculations • Intact Stability Analysis using Maxsurf • Preliminary Stability Reports / Stability Booklets • Ship Resistance & Power Prediction • Engine Power Estimation and Preliminary Engine Selection • Propulsion Analysis • Weight & Center of Gravity Estimation • Marine Electrical Load Calculations • Generator Sizing and Selection • Structural Analysis and Basic FEA using ANSYS • Technical Marine Engineering Reports I work with Rhino 3D, Bentley Maxsurf, AutoCAD, and ANSYS for vessel modeling, calculations, drawings, and engineering analysis. I can work from sketches, existing drawings, vessel particulars, client requirements, or existing CAD models to develop clear and practical engineering deliverables. My focus is on accurate calculations, clean CAD geometry, organized technical drawings, clear engineering documentation, and practical vessel design solutions. I am available for freelance projects involving Naval Architecture, Marine Engineering, Ship Design, Yacht Design, Boat Design, Maxsurf Stability, Hydrostatics, Resistance & Powering, Propulsion, Marine CAD, and Technical Reporting.

Architectural Engineer with 5+ years of experience delivering 500+ residential, commercial, and mixed-use projects across Saudi Arabia. I specialize in supporting engineering consultancies as a Back-... Read more

Architectural Engineer with 5+ years of experience delivering 500+ residential, commercial, and mixed-use projects across Saudi Arabia. I specialize in supporting engineering consultancies as a Back-Office / Outsourcing Engineering Partner, providing permit-ready drawings fully compliant with the Saudi Building Code (SBC) and municipality requirements. Scope of services: – Architectural design & shop drawings – Structural, Electrical & Mechanical coordination – Municipality submission packages and revisions until final approval I work with a dedicated multidisciplinary team, ensuring fast turnaround, high accuracy, and full commitment to technical comments and authority requirements. Open to technical cooperation with Saudi engineering offices as an external Back-Office partner.

Amira Karmoose – Civil / Structural Engineer. Has 25 years of expertise in structural design, covering: - Low rise and high rise reinforced concrete buildings. - Steel buildings such... Read more

Amira Karmoose – Civil / Structural Engineer. Has 25 years of expertise in structural design, covering: - Low rise and high rise reinforced concrete buildings. - Steel buildings such as hangars and industrial facilities. - Storage structures including tanks and pools. Preparing tender drawings, shop drawings, and calculation sheets. Proficient in the latest design and drafting software: Fast and accurate in delivering structural designs proven track record of producing high-quality work within deadlines.

An engineering draftsman specializing in creating precise technical drawings for engineering projects such as buildings, vehicles, and industrial products. I translate engineering principles and desi... Read more

An engineering draftsman specializing in creating precise technical drawings for engineering projects such as buildings, vehicles, and industrial products. I translate engineering principles and designs into detailed drawings using specialized software like AutoCAD and Revit, while adhering to approved technical standards and specifications. I collaborate effectively with engineers, ensuring clear and accurate drawings that lead to high-quality project execution.

Research And Development Mechanical Engineer, having 3 years of experience at various fields such as numerical analysis, aerospace, aeronautics, product design, robotics, Fluid power systems, pluming... Read more

Research And Development Mechanical Engineer, having 3 years of experience at various fields such as numerical analysis, aerospace, aeronautics, product design, robotics, Fluid power systems, pluming and networking. Worked at Egypt, Canada (Remotely), Australia (Remotely). Have knowledge, skills and attitude to design, analyze performance and maintain high performance products such as (chassis, solar systems, fans, ducts, thrusters, networks, casings, sealing systems, drilling tools, samplers, valves, hydraulic and pneumatic systems, automated machines and robots). Develop strategies, improve overall performance and reliability and safety of products. Deep knowledge of numerical analysis such as computational fluid dynamics, structural mechanics, fluid–structure interaction, heat transfer. Top skills: Computational Fluid Dynamics (CFD) • Research and Development (R&D) • Finite Element Analysis (FEA) • Problem Solving • Product Development

-Teaching Assistant at Alexandria University (Mathematics department). -Senior Electrical Engineer, graduated form Faculty of Engineering, Alexandria University with cumulative grade (Very Good With H... Read more

-Teaching Assistant at Alexandria University (Mathematics department). -Senior Electrical Engineer, graduated form Faculty of Engineering, Alexandria University with cumulative grade (Very Good With Honors ~ 84.45% )(Ranked 9th in my class). I have very good background in many fields of Electrical Engineering (e.g Electrical Distribution , Protection, Smart Home IOT and Light Current) With Good Experience In AutoCad , Dialux and Etap Soft-wares seeking to have a job as A Senior Engineer.

As an architectural firm its pleasure to provide you with services such as architectural design , construction and interior design and more detailed services that you can explore it on our website tha... Read more

As an architectural firm its pleasure to provide you with services such as architectural design , construction and interior design and more detailed services that you can explore it on our website thanks to our great experience in the field of architecture we guarantee high quality of all our services

Mechanical Design and technical Office Engineer (MEP) 1. HVAC systems Design and shop-drawing. 2. Firefighting systems Design and shop-drawing. 3. Plumbing systems Design and shop-drawing. 4. Inf... Read more

Mechanical Design and technical Office Engineer (MEP) 1. HVAC systems Design and shop-drawing. 2. Firefighting systems Design and shop-drawing. 3. Plumbing systems Design and shop-drawing. 4. Infrastructure systems Design and shop-drawing. 1. Prepare design drawings and shop-drawings for the above mentioned systems using software such as AutoCAD or Revit. 2. Review of design drawings to be in-compliance with national codes and standards and making full shop-drawings for mechanical systems (HVAC, Firefighting and plumbing). 3. Prepare of project specifications and contracts with agreement with client requirements. 4. Making hydraulic calculations for firefighting and plumbing systems manually and using software’s such as Elite and plumbing works. 5. Making Load estimation for different application using software HAP.

I am civil engineer graduated from engineering faculty of kfs university with overall rating: excellent. My graduation project was (design of reinforced concrete structures). I can use a lot of progr... Read more

I am civil engineer graduated from engineering faculty of kfs university with overall rating: excellent. My graduation project was (design of reinforced concrete structures). I can use a lot of programmes for designing for example: Csi etabs Csi safe Csi column Sab Autocad Excel ... By using these programmes I can design a lot of reinforced concrete elements: columns, slabs in different statical system ( flat,solid and holly block slabs) and foundation design as spreed footings or raft according to the soil strength In addition to that I can represent all of that in cad drawings professionally. Finally I hope to provide you with the best available service. Thanks...

Civil & Structural Engineer with 5+ years of experience in AutoCAD drafting, structural design, and construction documentation. I have worked on a wide range of residential, commercial, and industrial... Read more

Civil & Structural Engineer with 5+ years of experience in AutoCAD drafting, structural design, and construction documentation. I have worked on a wide range of residential, commercial, and industrial projects in Egypt and Canada, producing accurate drawings and design packages that comply with local codes and industry standards. My expertise includes: • AutoCAD drafting and detailing • Structural design and calculations • Construction drawings and permit packages • CAD standards development and implementation • Layer management, CTB plotting, and template creation • Sheet Set Manager configuration and drawing organization • XREF management and quality control procedures • Foundation, retaining wall, and swimming pool design • Site plans and grading plans • As-built drawings and CAD file modifications • Drawing review and technical documentation I am highly detail-oriented, organized, and committed to delivering clear, accurate, and professional work. Whether you need drafting support, CAD standards development, drawing reviews, or structural documentation, I can provide efficient solutions tailored to your project requirements. My goal is to help clients streamline their workflows, maintain drawing consistency, and produce high-quality deliverables on time and within budget.

I am an architect with over 20 years of experience in designing and supervising architectural projects in Saudi Arabia and Egypt. I have worked with major consulting firms and participated in distingu... Read more

I am an architect with over 20 years of experience in designing and supervising architectural projects in Saudi Arabia and Egypt. I have worked with major consulting firms and participated in distinguished projects, such as the development of heritage villages in Asir, the revitalization of the area surrounding the Quba Mosque in Medina, and the supervision of the Taiba University Hospital project. With my proficiency in programs such as AutoCAD, 3ds Max, SketchUp, Lumion, Photoshop, and MS Office, I can provide professional architectural designs, realistic 3D modeling, accurate technical reports, and high-quality quantity surveying. I believe that the success of any project begins with meticulous design and organized execution. That's why my goal is to provide you with practical and creative solutions that will ensure your project is delivered in the best possible way. I am ready to assist you with your project from the initial design concept through to completion and delivery. I am confident that my experience will be a true added value to your project. "If you have a project that requires a skilled architect with meticulous work, I would be honored to be part of your team."

Architect and BIM modeler specializing in AutoCAD drafting, Revit BIM modeling, and architectural production support for residential and commercial projects. I help architects, interior designers, de... Read more

Architect and BIM modeler specializing in AutoCAD drafting, Revit BIM modeling, and architectural production support for residential and commercial projects. I help architects, interior designers, developers, and small studios convert sketches, PDFs, markups, and concept designs into clean, organized, production-ready drawing sets and BIM models. My experience includes: -AutoCAD drafting & detailing -Revit BIM modeling -Floor plans, elevations & sections -Working drawing production -PDF/image to CAD conversion -3D architectural modeling -Architectural visualization support I have worked on residential villas, commercial office projects, and architectural documentation assignments, including preservation-related work for the historic Banque Misr building in Cairo. Software proficiency: AutoCAD | Revit | SketchUp | Enscape I focus on delivering: -Accurate technical documentation -Clean layer and file organization -Fast turnaround -Reliable communication -Production-ready deliverables Whether you need drafting support, BIM assistance, drawing updates, or organized architectural documentation, I can provide dependable technical production support with attention to detail and clear execution.

A highly motivated and detail-oriented Draftsman and Quantity Surveyor with over 4 years of experience in the construction and engineering industry. Proficient in preparing accurate architectural and... Read more

A highly motivated and detail-oriented Draftsman and Quantity Surveyor with over 4 years of experience in the construction and engineering industry. Proficient in preparing accurate architectural and structural drawings, quantity take-offs, and cost estimates using AutoCAD, Revit, and other industry-standard tools. Key skills include: Producing precise 2D/3D technical drawings Preparing BOQs, cost estimates, and tender documents Coordinating with architects, engineers, and site teams Ensuring compliance with project specifications and local regulations

Process Engineer & P&ID Designer with strong field-operational background in oil and gas facilities. Have a great experience in P&ID; drafting, as-built documentation, and process troubleshooting for... Read more

Process Engineer & P&ID Designer with strong field-operational background in oil and gas facilities. Have a great experience in P&ID; drafting, as-built documentation, and process troubleshooting for oil processing plants and gas compression systems.

Motivated Mechanical Engineering student at Alamein International University with hands-on experience in mechanical design and underwater robotics. Active member of the M.I.A robotics team, specializi... Read more

Motivated Mechanical Engineering student at Alamein International University with hands-on experience in mechanical design and underwater robotics. Active member of the M.I.A robotics team, specializing in the research and fabrication of ROVS and robotic manipulators. Combines mechanical design capabilities in SOLIDWORKS with simulation and control system experience using MATLAB, Simulink, and ROS 2. Supported by a solid foundation in competitive programming, with a strong interest in bridging the gap between hardware mechanisms and software integration.

im a mechanical and aerospace engineerin student talented with SolidWorks drawing and critical thinking

im a mechanical and aerospace engineerin student talented with SolidWorks drawing and critical thinking

I am Ahmed Bahnasy, an Electrical Engineer. I am a confident user of AutoCad, Dialux and ETAP. Based on my skills and experience, I can confidently do the following tasks: - Professional Electrical d... Read more

I am Ahmed Bahnasy, an Electrical Engineer. I am a confident user of AutoCad, Dialux and ETAP. Based on my skills and experience, I can confidently do the following tasks: - Professional Electrical design for lighting, power ,and power for HVAC based on codes and standards. - Professional light current systems design ( structured cabling, fire alarm, access control , public address system) including riser diagrams. - Shop Drawings for lighting, power, fire alarm , access control , structured cabling ,and public address systems - Making riser diagrams, single line diagrams, panel schedules and voltage drop calculation. - Loads estimation , bulk equipment sizing and space program. - Cable routing - General CAD drafting.

Technical Architect with 7+ years of experience delivering high-quality residential, commercial, and public building projects in Egypt and international markets. Experienced in coordination, technical... Read more

Technical Architect with 7+ years of experience delivering high-quality residential, commercial, and public building projects in Egypt and international markets. Experienced in coordination, technical documentation, and multidisciplinary collaboration with Architecture, MEP, and Interior Design teams. Skilled in producing coordinated construction documents, shop drawings, and tender packages using Revit, AutoCAD, and Navisworks

Motivated Mechatronics Engineering student at the Arab Academy for Science, Technology & Maritime Transport (AASTMT). Skills & abilities :- -Engineering Software- • SolidWorks • AutoCAD • LabVIEW... Read more

Motivated Mechatronics Engineering student at the Arab Academy for Science, Technology & Maritime Transport (AASTMT). Skills & abilities :- -Engineering Software- • SolidWorks • AutoCAD • LabVIEW -Programming- • C++ -Engineering Competencies- • Mechanical Design • 3D CAD Modeling • Design for Manufacturing (DFM) • Engineering Drawing • Manufacturing Processes • Automation and Control Systems • Technical Problem Solving • Engineering Analysis Engineering Projects :- -Three-Gear Gearbox Design Project- • Designed and analyzed a three-gear gearbox as part of the Dynamics course. • Applied mechanical design and kinematic principles to determine gear relationships and system performance. • Produced engineering calculations and design documentation. -Mechanical Components 3D Modeling- • Designed detailed 3D CAD models of pistons and various mechanical components using SolidWorks. • Generated technical drawings and assemblies in accordance with engineering standards. • Applied Design for Manufacturing principles throughout the design process. -Tank Filling Monitoring and Control System- • Designed and implemented a LabVIEW-based monitoring and control system for tank filling operations. • Developed automated control logic, level indication, and process monitoring functions. • Simulated industrial automation and process-control applications. Experience :- -AAM Formula Student Team- • Worked within a multidisciplinary engineering team focused on automotive design and development. • Contributed to engineering discussions, technical problem-solving, and team-based project activities. • Developed teamwork, communication, and project management skills in a competitive engineering environment. • Strengthened practical understanding of automotive engineering principles and vehicle systems. -INDUSTRIAL WORKSHOPS & MANUFACTURING EXPOSURE- • Participated in practical workshops covering casting, welding, cutting, and engineering measurement techniques. • Gained hands-on exposure to manufacturing operations, metal fabrication processes, and dimensional inspection methods. • Observed industrial safety procedures and quality-control practices. • Developed an understanding of production workflows and manufacturing fundamentals.

I'm a Mechanical Engineer with 5+ years of experience specializing in 3D modeling and mechanical design using SolidWorks. I’ve worked on industrial parts, complex assemblies, and functional prototypes... Read more

I'm a Mechanical Engineer with 5+ years of experience specializing in 3D modeling and mechanical design using SolidWorks. I’ve worked on industrial parts, complex assemblies, and functional prototypes, delivering high-quality, production-ready designs.

I am an Architect with 5 years of experience in technical drawings and 3D modeling using AutoCAD and Revit. I specialize in delivering accurate, detailed, and construction-ready designs tailored to cl... Read more

I am an Architect with 5 years of experience in technical drawings and 3D modeling using AutoCAD and Revit. I specialize in delivering accurate, detailed, and construction-ready designs tailored to client needs.

I am an architecture student specializing in architectural design and drafting, with experience using AutoCAD and Revit. I can assist with 2D architectural drawings, floor plans, elevations, sections,... Read more

I am an architecture student specializing in architectural design and drafting, with experience using AutoCAD and Revit. I can assist with 2D architectural drawings, floor plans, elevations, sections, Revit modeling, and basic BIM documentation. I am detail-oriented and comfortable working from sketches, PDFs, or existing drawings. I am available for small architectural tasks and short-term projects.

I am a licensed architect with 13 years of experience in architectural design, working drawings, and technical detailing. I specialize in AutoCAD drafting, shop drawings, construction documents, and l... Read more

I am a licensed architect with 13 years of experience in architectural design, working drawings, and technical detailing. I specialize in AutoCAD drafting, shop drawings, construction documents, and landscape drawings, with a strong background in residential and commercial projects.

Architectural Technical Engineer and BIM Modeler with two years of experience in Scan-to-BIM workflows, 2D/3D point-cloud processing, Canadian/Ontario permit documentation, Revit modeling, and multid... Read more

Architectural Technical Engineer and BIM Modeler with two years of experience in Scan-to-BIM workflows, 2D/3D point-cloud processing, Canadian/Ontario permit documentation, Revit modeling, and multidisciplinary BIM coordination. Experienced in developing architectural models and documentation from point-cloud data across medical, educational, administrative, and residential projects. Currently contributing to the Baccarat Hotel & Residences BIM project at LOD 300-350, with responsibilities including architectural modeling, architectural category coordination, BIM QA/QC, and multidisciplinary coordination and clash resolution using Revit and Navisworks. Strong practical knowledge of LOD 100-400, BIM Execution Plans (BEP), Common Data Environments (CDE), naming conventions, and BIM workflows. Experienced in team coordination, task assignment, project scheduling, workflow development, and mentoring junior staff and interns, combining technical BIM expertise with leadership and project delivery responsibilities.

I specialize in creating professional shop drawings for all types of furniture — including wardrobes, sofas, chairs, tables, vanities, doors, ceilings, and more. My deliverables typically include: •... Read more

I specialize in creating professional shop drawings for all types of furniture — including wardrobes, sofas, chairs, tables, vanities, doors, ceilings, and more. My deliverables typically include: • Precise 2D views (top, front, side) • Isometric or 3D previews for better visualization • Detailed sections for joinery and assembly • Cutting lists with edge banding details • CNC-ready DXF files for production All drawings are consultant-ready and tailored for real workshop execution and manufacturing. If you need clear, accurate, and production-ready drawings, I'm here to support your project needs. 🔹 Frequently Asked Questions: • Do the drawings include layout sheets? → Layout sheets with title block, scale, and printable format are optional and available upon request. • Can you provide CNC files or cutting lists? → Yes, both are available as optional add-ons, based on your production needs. • Are your drawings suitable for consultant approval? → Absolutely. All drawings are prepared to meet professional and consultant standards. Feel free to message me with any project-specific questions or requirements.

ambitions Architecture engineer, who wish to be at level of professional as u need for a good price , delivery time & satisfied detail to construction work done with no need of any information.

ambitions Architecture engineer, who wish to be at level of professional as u need for a good price , delivery time & satisfied detail to construction work done with no need of any information.

Experienced mechanical design engineer with a proven track record in delivering high-quality solutions. Skilled in CAD software, including SolidWorks, Autodesk Inventor, and AutoCAD. Currently contrib... Read more

Experienced mechanical design engineer with a proven track record in delivering high-quality solutions. Skilled in CAD software, including SolidWorks, Autodesk Inventor, and AutoCAD. Currently contributing to a team of five engineers at El Sewedy Electric, specializing in dry transformer design. Seeking freelance opportunities to leverage my expertise and deliver exceptional results. Key Skills: 2D and 3D modeling and drafting Complex assembly design Client requirement analysis and implementation Export and special order management Team collaboration and leadership