Hire CAD designers & engineers in Waterloo, Ontario

I am Harshal Patel, who recently graduated from the University of Windsor. I have done my masters in Mechanical Engineering and looking forward to pursuing my career in the computer-aided design field... Read more

I am Harshal Patel, who recently graduated from the University of Windsor. I have done my masters in Mechanical Engineering and looking forward to pursuing my career in the computer-aided design field. CAD CROWD is one of the best platforms, I can start from. I have expertise in 3D part modeling, assembly creation and provide drawing solutions. I am looking forward for good project which can help me to gain knowledge and also full fill your needs.

R&D engineer with multidisciplinary skillsets: - 3+ years of CAD design and engineering simulation. - 3+ years of electronic circuit design and PCB assembly. - 3+ years of hardware assembly via 3D... Read more

R&D engineer with multidisciplinary skillsets: - 3+ years of CAD design and engineering simulation. - 3+ years of electronic circuit design and PCB assembly. - 3+ years of hardware assembly via 3D printing techniques. - 3+ years of firmware and microcontroller programming. - 3+ years of scientific research in the field of Bioengineering.

Eight plus years of working experience in product design & development, -Wearable gadgets, security products, IoT, medical equipment, kitchen appliances & processor, electrical enclosure, electronic... Read more

Eight plus years of working experience in product design & development, -Wearable gadgets, security products, IoT, medical equipment, kitchen appliances & processor, electrical enclosure, electronic products etc. -Knowledge of new and emerging products, processes and technologies. -Hands-on experience in DFM & DFMEA for product betterment and critical risks assessment. - Adaptive to a fast-paced environment needing minimal supervision

ENGLISH : I am a freelance Architectural Designer with diverse experience in project management within the construction industry. Holding a Bachelor of Architecture from the National School of Archite... Read more

ENGLISH : I am a freelance Architectural Designer with diverse experience in project management within the construction industry. Holding a Bachelor of Architecture from the National School of Architecture of Paris Val-de-Seine in France, I have developed a deep expertise in architectural design and project management. My skills include advanced proficiency in design software such as AutoCAD, REVIT, SketchUp Pro, and ArchiCAD, as well as 3D modeling skills with Lumion, Enscape, and Artlantis. I am also proficient in using Adobe software such as Photoshop, Illustrator, and InDesign for creating graphic renders and project presentations. My professional experience includes project management roles at ARCADE SARL ARCHITECTURE and AREMIS, where I led teams and supervised all stages of construction, from planning to execution. I have also worked as an interior architect, contributing to architectural plan design and on-site work coordination. As a versatile professional, I possess excellent time management, communication, and teamwork skills. I am able to adapt to different work environments and meet client requirements with rigor and professionalism. My personal interests include oil painting, photography, and fitness, which enhance my creativity and artistic vision in my professional projects. My profile biography highlights my experience and skills in architecture and project management, as well as my passion for creativity and innovation. // FRANCAIS : Je suis une designer en architecture en freelance avec une expérience diversifiée en gestion de projets dans l'industrie de la construction. Titulaire d'un Baccalauréat en Architecture de l'École Nationale Supérieure d'Architecture de Paris Val-de-Seine en France, j'ai développé une expertise approfondie en conception architecturale et en gestion de projets. Mes compétences incluent une maîtrise avancée des logiciels de conception tels que AutoCAD, REVIT, SketchUp Pro et ArchiCAD, ainsi que des compétences en modélisation 3D avec Lumion, Enscape et Artlantis. Je suis également compétente dans l'utilisation des logiciels Adobe tels que Photoshop, Illustrator et InDesign pour créer des rendus graphiques et des présentations de projets. Mon expérience professionnelle comprend des rôles de gestion de projet chez ARCADE SARL ARCHITECTURE et AREMIS, où j'ai dirigé des équipes et supervisé toutes les étapes de la construction, de la planification à l'exécution. J'ai également travaillé en tant qu'architecte d'intérieur, contribuant à la conception de plans architecturaux et à la coordination des travaux sur site. En tant que professionnelle polyvalente, je possède d'excellentes compétences en gestion du temps, en communication et en travail d'équipe. Je suis capable de m'adapter à différents environnements de travail et de répondre aux exigences des clients avec rigueur et professionnalisme. Mes intérêts personnels incluent la peinture à l'huile, la photographie et le fitness, qui enrichissent ma créativité et ma vision artistique dans mes projets professionnels. Ma biographie de profil met en avant mon expérience et mes compétences dans le domaine de l'architecture et de la gestion de projets, ainsi que ma passion pour la créativité et l'innovation.

I am a Professional Engineer and Certified SolidWorks Professional located near Toronto, Canada so communications will be easy. I am also SolidWorks certified in Advanced Sheet Metal and Advanced Mold... Read more

I am a Professional Engineer and Certified SolidWorks Professional located near Toronto, Canada so communications will be easy. I am also SolidWorks certified in Advanced Sheet Metal and Advanced Mold Tools. I have used SolidWorks since 2001. I own SolidWorks Premium 2018 and I am on subscription to stay current. I have kept SolidWorks releases going back to 2014, to stay compatible with clients who have not upgraded. I also own SolidWorks Visualize Professional 2018 (formerly Bunkspeed) to do my renderings. For nine years I owned a custom display manufacturing business in Toronto, so I am very comfortable with taking a client’s pencil sketch ideas and doing a complete 3D model in SolidWorks to get design approval before creating a full set of manufacturing drawings. I believe in "walk before you run", and I hate rework, so I get client feedback early & often to be sure we are always on the same track. I use GrabCAD Workbench to securely share files with my clients. You will be able to use your web browser to view, rotate, measure & annotate the files. You can also download the files and work on them. Once you are satisfied, I will do the drawing package. My hourly rate is $60. My available hours per week can vary to meet the project schedule. I normally work 8:00am to 4:00pm EST but I am available evenings & weekends to meet project deadlines. Best regards, Bill Toft, P. Eng., CSWP WLT design

16 years of interior design experience: I have extensive experience in interior design, working on a variety of projects from retail and restaurant design to theme parks and entertainment complexes. 2... Read more

16 years of interior design experience: I have extensive experience in interior design, working on a variety of projects from retail and restaurant design to theme parks and entertainment complexes. 20 years with AutoCAD: I've worked on detailed construction drawings and technical specifications for various projects, ensuring precision and adherence to design standards. 18 years with SketchUp: I specialize in creating detailed and realistic 3D models for interior designs. Training in 3ds Max: My recent training has equipped me with advanced skills in rendering, animation, and lighting techniques, enabling me to produce photorealistic visualizations.

I am an experienced mechanical design and industrial Engineer with a demonstrated history of working in the automotive industry. I have been working for a year as a mechanical engineer and for the la... Read more

I am an experienced mechanical design and industrial Engineer with a demonstrated history of working in the automotive industry. I have been working for a year as a mechanical engineer and for the last year, I have been working with different companies as a design engineer. Major fields of work: Design for manufacturability (DFM processes) Solidworks design & rapid prototyping product development innovative design ideas design documentation from drafts to renders injection moulding designs plastic products 3d printable product design I have done multiple projects on different fields of industry such as research, lean manufacturing, SolidWorks modelling, Matlab GUI & Simulink and ANSYS FEA & CFD.

Hello there! :) My name is Warwick Shaw, and I am a Millwork Engineer and Draftsman with 2 years of experience in the Millwork industry. I also have experience with 3D printers and CNCs. I have the... Read more

Hello there! :) My name is Warwick Shaw, and I am a Millwork Engineer and Draftsman with 2 years of experience in the Millwork industry. I also have experience with 3D printers and CNCs. I have the following software experience: - 5+ years in Sketchup - 2+ years in AutoCAD (2D only) - 2+ years in Fusion 360 My experience lies in the Furniture/Millwork industries. I can complete the following tasks: - Engineer custom cabinetry and create floor plans - Design metal components - Create sheet metal patterns and drawings - Model complex products - Design products optimized for 3D printing - Create CNC G-Code/M-code files I look forward to working with you! :)

Design Engineer with several years of experience in design of piping, steel structure and pressure vessels. High level of expertise in piping analysis using AutoPIPE and CAESAR II. FEA expertise usi... Read more

Design Engineer with several years of experience in design of piping, steel structure and pressure vessels. High level of expertise in piping analysis using AutoPIPE and CAESAR II. FEA expertise using Ansys Workbench 3D modeling using Inventor and Solidworks.

Experienced Mechanical Design Engineer with a demonstrated history of working in the water treatment equipment manufacturing and machining industry. Skilled in AutoCAD Mechanical, AutoCAD, Microsoft... Read more

Experienced Mechanical Design Engineer with a demonstrated history of working in the water treatment equipment manufacturing and machining industry. Skilled in AutoCAD Mechanical, AutoCAD, Microsoft Word, SolidWorks, and Technical Writing. Strong program and project management professional with an Ontario College Diploma focused on Mechanical Engineering (Design & Drafting) Program from Sheridan College.

- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy... Read more

- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy Plus - Experienced with designing piping systems, cooling water systems, HVAC, compressed air systems, tanks, furnaces, copper cooling blocks for furnaces, off-gas treatment systems, hoods, leak detection systems

Expert in CATIA V5 - 3D modelling, Assembly, Rendering and technical drawings. I am currently pursuing my Master of Engineering in Mechanical Engineering at University of Windsor. Aeroplane Landing Ge... Read more

Expert in CATIA V5 - 3D modelling, Assembly, Rendering and technical drawings. I am currently pursuing my Master of Engineering in Mechanical Engineering at University of Windsor. Aeroplane Landing Gear, Valve assemble, Screw jack assembly and v-block assembly are one of projects. I completed certification in Udemy -CATIA V5.\ I completed NPTEL certifications in Manufacturing Technology.

Strong skills developed in design, manufacturing, and management through co-op work terms and club experience. Previous employment includes conception and design of industrial automation equipment fro... Read more

Strong skills developed in design, manufacturing, and management through co-op work terms and club experience. Previous employment includes conception and design of industrial automation equipment from consumer packaging to aluminum refinement.

Designing tooling, process, product, packaging in-house for Fremaco Devices Inc.

Designing tooling, process, product, packaging in-house for Fremaco Devices Inc.

Objectives: I am an Interior Designer with 6 years of Canadian experience, specializing in kitchen and bath design as well as 3D architectural and interior renderings. I help clients bring their idea... Read more

Objectives: I am an Interior Designer with 6 years of Canadian experience, specializing in kitchen and bath design as well as 3D architectural and interior renderings. I help clients bring their ideas to life with creative, functional, and visually striking design solutions. Summery: • Experienced Interior Decorator with over 4 years of Canadian experience in residential and commercial projects • Reading architectural CAD and/or Revit drawings • Developing modeling, texturing, lighting, rendering setup, and post-production • Creating photo-realistic 3D models of interiors and exteriors for presentations • Mastering the development, continuity, and detailing of design concepts when creating 3D environments • Producing high-quality imagery that is consistent with project needs. • Proven ability to produce high-quality renderings under tight deadlines. • Creativity with an eye for design and aesthetics • Excellent communication skills with the ability to present ideas in a clear and concise manner. • Ability to multi-task and work on various projects simultaneously Skills: • Expert in 3D modeling, texturing, lighting, and Cameras • Proficient in using software such as 3d max, AutoCAD, Revit, Adobe Photoshop, Vary, Corona • Strong understanding of design principles and color theory • Excellent communication and interpersonal skills

Mechanical engineering with heavy industry experience. Masters 3D and 2D drawings: Structure details, Layouts, mechanisms, Fabrication drawings, etc. Great communication in English and French. Certifi... Read more

Mechanical engineering with heavy industry experience. Masters 3D and 2D drawings: Structure details, Layouts, mechanisms, Fabrication drawings, etc. Great communication in English and French. Certified Solidworks Professional: Parts, Assemblies, Drawings, Weldments, BOMs, Sheet metal

Hello, My name is Yigitcan I am mechatronics engineer I have a lot of experience I am an expert at designing your CAD models using Solidworks and Fusion 360 CAD softwares and can produce 3D and 2D mod... Read more

Hello, My name is Yigitcan I am mechatronics engineer I have a lot of experience I am an expert at designing your CAD models using Solidworks and Fusion 360 CAD softwares and can produce 3D and 2D models for you in the desired format.

TRANSFORMATION OF IDEAS INTO WORKING DRAWING & CONCEPTS. - That's what I do A passionate SOLIDWORKS professional with more than 3 years of experience in Engineering design and drafting field. I am... Read more

TRANSFORMATION OF IDEAS INTO WORKING DRAWING & CONCEPTS. - That's what I do A passionate SOLIDWORKS professional with more than 3 years of experience in Engineering design and drafting field. I am currently working as Manufacturing Engineer in leading Manufacturing Company in Ontario, Canada. Aviation Engineering (Mechanical) and Automated Manufacturing under my academics qualification, provides me with skills and knowledge of Designing & Manufacturing field. My capabilities include working from simple object designing to Factory layout in CAD. If you need help with Jig & Fixture design, Prototyping, Mechanical design & drafting and workplace design, HIRE ME. I would love to have a coffee with you and discuss innovative solutions for your project.

I am a professional 3D and Post-Production artist with over 5 years of experience in these areas as a freelancer. My academic background consists of a University degree in Sound & Image, (Image branch... Read more

I am a professional 3D and Post-Production artist with over 5 years of experience in these areas as a freelancer. My academic background consists of a University degree in Sound & Image, (Image branch specialization). Along with my formal education and several online courses in 3D, Visual Effects and Compositing, I am up to date with the latest techniques and technology to ensure my workflow is the most efficient, in order to deliver the best results and experience to the client. I have worked in various fields like: 3D ( Modeling, Texturing, Rendering), Compositing, Photography, Editing, Directing and Sound Design. I am bilingual in English and Portuguese, so language barriers are never an issue. I thrive working in creative projects and I guarantee you competence/quality and a fast turnaround, giving you great value for your investment. My portfolio website: http://www.entropy-machine.com

30 plus years in the Tool and Die field, proficient in Stamping Die Design using solidworks, UGNX, Pro E and inventor. Also have designed many fixtures and Automation/Robotics assembly and welding cel... Read more

30 plus years in the Tool and Die field, proficient in Stamping Die Design using solidworks, UGNX, Pro E and inventor. Also have designed many fixtures and Automation/Robotics assembly and welding cells. Proficient in complex surfacing for tool and die and mold making industry. I am also a licensed tool and die maker

I am currently a student at the University of Waterloo, pursuing a Master of Engineering Degree in Mechanical and Mechatronics Engineering. While I was pursuing my undergraduate degree I was able to i... Read more

I am currently a student at the University of Waterloo, pursuing a Master of Engineering Degree in Mechanical and Mechatronics Engineering. While I was pursuing my undergraduate degree I was able to intern at a manufacturing company and an automotive company for 8 months each. Both experiences allowed me to gain valuable experience and insight into effective design practices. In addition, I am pursuing a Graduate Design Diploma to hone my skills in Mechanical Engineering design.

With experience in fields ranging from workflow optimization to medical and industrial product design, I have been fascinating by the art of computer aided engineering and design for years now. As the... Read more

With experience in fields ranging from workflow optimization to medical and industrial product design, I have been fascinating by the art of computer aided engineering and design for years now. As the Chief Executive of 7C Laboratories, my success with personal ventures has been attributed greatly to my humble beginnings in design, and it only seems right to continue the work that has brought me this far, as it is highly fulfilling. Some of my most successful work was produced at my time at Cardon Rehabilitation & Medical Equipment Ltd., and Viper Tattoo Tables Ltd.; both of which introduced me to the fields of industrial and product design. I continued my work through my personal company after deciding to move venture onward. I still produce designs for both of these previous employers through my aforementioned business. Design is my passion, and I hope that in the future, we can work together to make something truly great!

Seasoned CAD expert with over 7 years of proficiency in AutoCAD, Revit, Inventor, SketchUp, Civil 3D, and MS Office Suite. Proven track record in delivering high-quality drafting, design, and modeling... Read more

Seasoned CAD expert with over 7 years of proficiency in AutoCAD, Revit, Inventor, SketchUp, Civil 3D, and MS Office Suite. Proven track record in delivering high-quality drafting, design, and modeling solutions for Residential, Commercial, Industrial, and Engineering projects. Collaborated extensively with architects, engineers, contractors, and builders in both Canada and the US. As a gold medalist structural engineer with advanced degrees in Building Systems and Project Management, I bring exceptional technical expertise and problem-solving skills to every project. Renowned for efficiency, accuracy, and timely delivery, I am committed to client satisfaction and data privacy. With a passion for knowledge sharing, I excel at training professionals to optimize their workflow and achieve expert-level proficiency.

I am a mechanical engineering enthusiast based in Canada, and I have been designing and building robots and programming solutions for science fairs and design competitions. I am currently working o... Read more

I am a mechanical engineering enthusiast based in Canada, and I have been designing and building robots and programming solutions for science fairs and design competitions. I am currently working on a novel robot programming method that aims to make robot arm programming 95 % cheaper and 4 times easier. I have a great work ethic and I really love what I do. I have experience in the following areas: DEM simulations 3d modeling - Fusion 360 - Inventor - Blender Programming - Python - C++ - JavaScript etc. Thank you for your consideration.

University of Toronto mechanical engineering graduate with several years of professional experience at companies including General Motors. Offering the following services: -Mechanical/Mechatronics... Read more

University of Toronto mechanical engineering graduate with several years of professional experience at companies including General Motors. Offering the following services: -Mechanical/Mechatronics design consulting -CAD (Solidworks and Fusion 360) -Software development (Python and VBA) -Technical, creative, and web content writing Limited prototype development services can also be arranged.

Willing to for cheap or free to gain experience. Proficiency in AutoCAD and solidworks. I have support of an experienced professor available to teach me when I am stuck.

Willing to for cheap or free to gain experience. Proficiency in AutoCAD and solidworks. I have support of an experienced professor available to teach me when I am stuck.

Motivated Mechanical Engineer specializing in design, analysis, and optimization of mechanical systems. Experienced SolidWorks user with advanced skills in CAD modeling, simulation (FEA/CFD), and prot... Read more

Motivated Mechanical Engineer specializing in design, analysis, and optimization of mechanical systems. Experienced SolidWorks user with advanced skills in CAD modeling, simulation (FEA/CFD), and prototyping. Proven success in both traditional and additive manufacturing, including CNC machining and 3D printing. Passionate about delivering efficient and innovative solutions for engineering challenges.