I am Abubakar, a qualified Civil Engineer holding a BS Tech in Civil Engineering. With a strong foundation in civil design principles, I specialize in delivering accurate and professional CAD services... Read more

I am Abubakar, a qualified Civil Engineer holding a BS Tech in Civil Engineering. With a strong foundation in civil design principles, I specialize in delivering accurate and professional CAD services tailored to civil engineering projects. My core offerings include: AutoCAD 2D Civil Drafting: Creating precise 2D drawings such as site plans, layout plans, road alignments, drainage systems, foundation details, cross-sections, and as-built drawings. AutoCAD Civil 3D: Advanced surface modeling, profile creation, corridor design, grading, earthwork calculations, and pipe network layouts for land development, highways, and infrastructure projects. CAD Data Entry & Conversion: Converting scanned drawings, PDFs, hand sketches, or legacy files into editable AutoCAD/Civil 3D formats with high accuracy and attention to detail. I ensure all deliverables are clean, layered properly, dimensioned correctly, and ready for construction or further engineering review. Committed to fast turnaround times, clear communication, and meeting deadlines while maintaining quality standards. Available for hourly or fixed-price projects. Located in Ras Al Khaimah, UAE (flexible with international clients and time zones). Let's collaborate to turn your civil engineering ideas into precise, buildable CAD files—message me to discuss your project!

I am a professional Architectural Draftsman with 8+ years of experience in 2D/3D design, floor plans, elevation drawings, structural detailing and site supervision. I work with AutoCAD, ArchiCAD and m... Read more

I am a professional Architectural Draftsman with 8+ years of experience in 2D/3D design, floor plans, elevation drawings, structural detailing and site supervision. I work with AutoCAD, ArchiCAD and modern drafting standards to deliver accurate and professional drawings for residential, commercial and industrial projects. I am fast, reliable and available anytime for urgent projects.

Interior designing, 3d modelling, 3d Visualizing, Architectural visualizing and AutoCad Drafting.....

Interior designing, 3d modelling, 3d Visualizing, Architectural visualizing and AutoCad Drafting.....

I then fortified my base through 6-years of experience as a CAD Draftsman in a Design Planning firm and continued my professional career as an Architect for joining in one of the leading Engineering C... Read more

I then fortified my base through 6-years of experience as a CAD Draftsman in a Design Planning firm and continued my professional career as an Architect for joining in one of the leading Engineering Consulting & Contracting firms. I have worked on many project types from houses to vernacular buildings, to master site plan developments both hardscape and softscape works, and also commercial buildings. I am responsible for preparing and revising intricate technical drawings, starting from the designing up to the execution stage, attaining success level of precision as it relates to client's specifications and maintaining fidelity with overall design intent. I specialize in hardscape and softscape work. I modify and update plans according to project specifications and building codes. I have also honed my skills with continued training and certifications for 3D software such as 3ds Max + V-Ray & Revit, along with a course on applications of green building design within projects. These skills are paired with my experience in structural design and construction, meaning I can produce technical drawings that are accurate as well as usable.

Over 20 years of experience as Civil & Structural Designer / Coordinator in variety of oil & gas EPC projects, Petrochemical refineries, Fertilizers, nuclear power plants, industrial buildings, and ma... Read more

Over 20 years of experience as Civil & Structural Designer / Coordinator in variety of oil & gas EPC projects, Petrochemical refineries, Fertilizers, nuclear power plants, industrial buildings, and material handling terminal. The following task are to name a few: studying scope of work, detailed engineering for structure and foundation, vendor document review for equipment’s and prefabricated buildings, Bar Bending Schedule & Fabrication Drawing Checking, coordination with other engineering discipline, attending meeting with client & Vendors, Bidding MTO etc. to assist the tendering department. As Civil & Structural Designer My Strengths are to Prepare complex detail and assembly drawings of new or modified designs using creativity in drawings and layouts, drawing checking, bar bending schedule, developments of drawings and modeling by using various engineering software such as E3D, PDMS, PDS, SP3d, Micro station V8i, AutoCAD. Ensuring completion of assigned tasks under limited supervision in the agreed duration. I also have experience in attending the project and client meetings and construction feasibility review and 3D model review with clients.

A highly experienced Interior Designer and Architectural & Interior AutoCAD Draftsman with over 23 years of comprehensive expertise in design development, technical drafting, and project execution acr... Read more

A highly experienced Interior Designer and Architectural & Interior AutoCAD Draftsman with over 23 years of comprehensive expertise in design development, technical drafting, and project execution across residential, commercial, retail, and hospitality sectors. Possesses strong capabilities in transforming conceptual ideas into precise technical drawings and detailed execution plans, ensuring alignment with client requirements, regulatory standards, and site conditions. Extensive experience in handling projects from initial concept through to final completion.

EUR ING Electrical Design Engineer & Revit (BIM) Specialist with 10+ years across United Arab Emirates, Ireland, and Türkiye. I turn concept/IFC into coordinated, buildable electrical deliverables: ca... Read more

EUR ING Electrical Design Engineer & Revit (BIM) Specialist with 10+ years across United Arab Emirates, Ireland, and Türkiye. I turn concept/IFC into coordinated, buildable electrical deliverables: calculations, SLDs/schematics, Revit BIM (LOD 300–500), shop drawings, and DIALux EVO lighting reports. I help clients move from concept/IFC → coordinated, construction-ready electrical deliverables for pharma/industrial and commercial projects. My focus is producing clear outputs that contractors can build from: well-structured drawings, coordinated containment, and consistent schedules. Core services Electrical calculations: load schedules, cable sizing, voltage drop, short-circuit (where required), protection philosophy/coordination, earthing & bonding SLDs & schematics: LV distribution, ATS/AMF/generator interfaces, typical details Revit Electrical BIM: LOD 300–500 (LOD 400 shop drawing level), clash resolution & MEP coordination Drafting & production: AutoCAD drafting, coordination drawings, redlines and as-built updates Lighting design: DIALux EVO calculations, lux compliance, optimized layouts & reports Deliverables: layouts, containment coordination, builderswork openings/penetrations, schedules, shop drawings, as-built packages How I work Quick scope alignment (areas, deliverables, standards, deadlines) First issue set (plans/schedules/SLDs) for review Coordination + revisions → final “buildable” package Confidentiality I’m fully NDA-friendly. Public portfolio samples are anonymized; full examples can be shared privately under NDA if required. (CAD Crowd also supports NDAs under their process.)

I am a senior Precast concrete drawing detailer, detailing precast concrete structural products (e.g. Wall Panels, Stairs, Hollow core, Cladding Panels, Double T, etc.) with extensive experience in pr... Read more

I am a senior Precast concrete drawing detailer, detailing precast concrete structural products (e.g. Wall Panels, Stairs, Hollow core, Cladding Panels, Double T, etc.) with extensive experience in producing accurate precast production drawings, erection drawings and detailing

Senior Civil & Structural Designer with 20+ years of experience in preparation and review 2D and 3D modelling for Steel & foundation of Civil & Structural activities for Oil & Gas, LNG and Petrochemic... Read more

Senior Civil & Structural Designer with 20+ years of experience in preparation and review 2D and 3D modelling for Steel & foundation of Civil & Structural activities for Oil & Gas, LNG and Petrochemicals Projects. I have been involved in various Detail Engineering and EPC projects throughout my career. I have a good understanding of the responsibility of steel & Foundation deliverable for Oil & Gas, LNG and Petrochemicals projects. Proficient in SP3D & Smart sketch, Tekla Structure, PDS- Framework plus, MicroStation V8.1, AutoCAD. Thanks & Regards, Ravi Manu ▒▒▒▒▒▒▒▒▒▒▒▒▒

I am professional, motivated and responsible person with year of Experience attained in the construction field. I am resourceful, flexible and task oriented, having good communication and influencing... Read more

I am professional, motivated and responsible person with year of Experience attained in the construction field. I am resourceful, flexible and task oriented, having good communication and influencing skill. I have the ability to interact confidently and effectively on individual basis as well in the field of Civil & Landscape & irrigations project.

I Have been working freelance for the past 2 years on various platforms. Successfully designed print-ready models for various applications including manufacturing, visualisation and product photo set-... Read more

I Have been working freelance for the past 2 years on various platforms. Successfully designed print-ready models for various applications including manufacturing, visualisation and product photo set-up. Professional Rendering is offered with excellent attention to detail just as needed. Capable of converting 2D sketches to 3D models with precise detail.

I am a Utilities/MEP Coordination Engineer with over 8 years of experience in the construction industry, where I have provided support to construction teams, technical teams, subcontractors, designers... Read more

I am a Utilities/MEP Coordination Engineer with over 8 years of experience in the construction industry, where I have provided support to construction teams, technical teams, subcontractors, designers, and independent checkers. My expertise includes coordinating external utility services, managing MEP services, and facilitating coordination between MEP, Architectural, and Civil/Structural disciplines. I have extensive experience in preparing Design/Field Change Requests and reviewing MEP shop drawings and as-built drawings. With 9 years of experience as a CAD/Piping Designer in the oil and gas sector, I have specialized in the preparation of engineering drawings such as Piping G.A., Plot Plans, Piping Isometrics with Bill of Materials, Civil/Structural Drawings, PFD and P&ID, and Electrical and Instrumentation Drawings. In my role as a Mechanical Design Engineer for 2.5 years at an EPC company, I focused on the preparation of detailed engineering drawings for pressure vessels, heat exchangers, and platforms/ladders. I also reviewed vendor documents, including calculations and fabrication drawings. Additionally, I have 1 year of experience as a Design Engineer in a manufacturing company, where I was responsible for creating engineering fabrication drawings for boilers and their components, along with parts lists, summary sheets, and material withdrawal sheets. I am proficient in AutoCAD 2D and 3D Solid Modelling, Bentley AutoPlant for piping design, and have basic knowledge of Aveva PDMS, Navisworks Manage, Civil 3D, and Revit.

2 Decades of manufacturing engineering with the deep knowledge of Design, Machining, Fabrication Manufacturing Process and Control Plan. Carrier starts with Machine tools design like Jigs & Fixture, P... Read more

2 Decades of manufacturing engineering with the deep knowledge of Design, Machining, Fabrication Manufacturing Process and Control Plan. Carrier starts with Machine tools design like Jigs & Fixture, Press tools for 3 years. Then next 2 years work with Automotive ancillary products as a TSG member with great experience with leading a team for prototype of Hyundai i10 & i20 Car brake caliper machining. Then last 15 years working in UAE in the field of Smelter Busbar fabrication, and Design and manufacturing of Special Hydraulic machines for Oil and Gas Service Industries.

Autocad, Revit , Estimation and BIM experts 3 plus years of experience working as Assistant Architect

Autocad, Revit , Estimation and BIM experts 3 plus years of experience working as Assistant Architect

I am a seasoned Electrical CAD Drafter with over 8 years of specialized experience in MEP construction. Throughout my career, I have contributed to a diverse portfolio of large-scale projects, includi... Read more

I am a seasoned Electrical CAD Drafter with over 8 years of specialized experience in MEP construction. Throughout my career, I have contributed to a diverse portfolio of large-scale projects, including high-rise residential buildings, hospitals, schools, military facilities, industrial plants, villas, and hotels.