Remote
Work location
AGi32 Road project Anyone
About the job
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Mu... read more
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Mu... read more
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission. read less
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission. read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
AGI32
AGi32
DIALUX
DIALux
Lighting Design
+2 more
Job categories
Lighting Design
3D Design Services
3D Modeling
About the client
Payment not ready
Turkey (07:55 pm)
Posted
Active
Job activity
5 Applicants
0 interviews in progress
More open jobs from this client (1)
Agi32 lighting design project
Remote - Posted
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The...
Lighting Design
Electrical Engineering
Electrical Instrumentation Services
View job
Similar jobs
2-TIER TEST
Remote - Posted
Hi Azil, as per our communication. I will send you the plinth details upon your acceptance of this invitation.
2D CAD Design Services
3D Design Services
3D Modeling
View job
Agi32 lighting design project
Remote - Posted
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The...
Lighting Design
Electrical Engineering
Electrical Instrumentation Services
View job
3d cad assembling rhino for yacht
Remote - Posted
Looking for egeneer for draw in 3d assembling for yacht including some mechanical draws.
Contest boat and yacht.
3D Modeling
Yacht & Marine
3D Design Services
View job
CNC CAM Programmer Needed for Wooden Tray – $30 Paid Task | Potential Ongoing Weekly Work
Remote - Posted
I am looking for an experienced CNC CAM programmer for a small first paid task.
Budget: $30
The first task is to prepare a complete CAM/production package for one wooden...
CNC Programming
3D Design Services
3D Modeling
View job
Aerospace Engineer/Aeronautical CAD Designer
Remote - Posted
I am working on a small aerodynamics project and need help optimizing a wing planform (chord, span, sweep, taper, airfoil) against a set of performance targets using OpenVSP,...
Aerospace Engineering
Computational Fluid Dynamics
3D Design Services
View job
Custom 3D CAD dwg for car parts
Oklahoma City, United States - Posted
I have several custom parts I am needing for a car I am building. I need to get them drawn so I can send them off to get printed/fabricated. The first part is a custom headli...
3D Modeling
3D Design Services
Engineering Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
204,248
global members
33,346
projects delivered to clients
Trusted by
