Remote
Work location
Agi32 lighting design project Ended
About the job
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
IES/LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
IES/LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
IES/LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
IES/LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission.
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Mu... read more
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Mu... read more
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
IES/LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission. read less
The project consists of:
10 road cross-sections in total
8 main cross-sections + 2 RAS cross-sections
Approximately 37 individual roadway/carriageway calculation areas
Different road classes including M1, M2, M3 and M4
Multi-lane highways, service roads and emergency lanes
Both conventional streetlight and high-mast floodlight arrangements
We will provide:
Final DIALux calculation reports for every cross-section
DWG cross-section drawings
IES/LDT photometric files
Luminaire models and wattages
Pole heights, spacings, tilt angles and arrangements
Maintenance factors and required lighting criteria
The task is not to redesign the lighting. The freelancer should recreate the existing final DIALux designs as closely as possible in AGi32 and produce the corresponding AGi32 project files and calculation reports.
The main objective is to obtain an AGi32 version of the already completed DIALux road lighting design for project submission. read less
Things to know
Expert
Skill Level
$500
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Design
AGi32
DESIG
Design 3D
design
+2 more
Job categories
Lighting Design
Electrical Engineering
Electrical Instrumentation Services
About the client
Payment not ready
Turkey (11:06 pm)
Posted
Active
Job activity
20 Applicants
0 interviews in progress
More open jobs from this client (1)
AGi32 Road project
Remote - Posted
We have an existing road lighting project that has already been fully designed and calculated in DIALux. We now need the same project recreated and calculated in AGi32.
The...
Lighting Design
3D Design Services
3D Modeling
View job
Similar jobs
PV*SOL Design & Simulation Expert Needed for Commercial Solar/BESS Project (700 kWp / 500 kWh)
Remote - Posted
Project Overview:
PV Array: ~700 kWp rooftop installation
Inverter System: 500 kW capacity (commercial string inverters)
Battery Storage: 500 kWh BESS integration
Grid S...
Solar Panel Drawing Plans
Engineering Design
Electrical Engineering
PV Solar Panel Drafting
View job
BC Residential Design Consultation – Garage, Exterior & Yard Improvements
Remote - Posted
Summary
This is a short residential design consultation, not a full design package.
The house and garage are already designed and under construction. I will provide drawings...
Home Design
Landscape Design
Architectural Detailing Services
Lighting Design
Electrical Engineering
View job
Solidworks drawings for electrical equipment and
Remote - Posted
Looking for someone who has experience in solid works and engineering drawings for product design
SolidWorks Design Services
Industrial Design Services
Manufacturing Drawings
Electrical Engineering
View job
Electronics Engineer – PCB Sourcing & Manufacturing
Remote - Posted
Electronics Engineer – PCB Sourcing & Manufacturing
We are looking for an experienced, technically skilled Electronics Engineer to manage PCB sourcing and manufacturing for...
Product Engineering Services
Electronic Prototyping and Design Services
Electrical Engineering
Electronics Design Service
PCB Design Services
View job
Junior Architectural Lighting Designer
Remote - Posted
Architecture / Interior Architecture / Lighting Design
AutoCAD proficiency
Excellent RCP/documentation ability
Understanding of architectural details
Interior-desi...
Lighting Design
Interior Design
Architectural Planning and Design
2D CAD Design Services
View job
PCB Layout Engineer
Irvine, United States - Posted
Required Qualifications
Strong experience in PCB layout design for multilayer boards.
Experience in footprint creation, verification, and library management.
Knowledge of I...
PCB Design Services
Electronic Prototyping and Design Services
Electrical Engineering
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
220,425
global members
33,595
projects delivered to clients
Trusted by
