Remote
Work location
Jewelry CAD Designer Needed – Algeria Map Ring (Lightweight for Lost Wax Casting) Anyone
About the job
Hello,
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requirements
Elegant and minimalist ring.
Algeria map approximately 10 mm high.
Thin and refined band.
Comfortable for everyday wear.
Smooth transitions between all parts.
Highly polished surfaces.
The map should appear to be floating between both sides of the ring with discreet connections.
Lightweight Optimization (Very Important)
The most important objective is to create the lightest possible ring.
Please optimize the design to reduce gold consumption as much as possible.
Requirements:
Reduce all unnecessary metal.
Thin band while maintaining strength.
Thin map thickness while keeping durability.
Minimal connection points.
Avoid bulky areas.
Uniform wall thickness.
Professional jewelry appearance.
Suitable for everyday wear.
The objective is to achieve the lowest casting weight possible without compromising quality.
Manufacturing Requirements
The model must be ready for professional jewelry production.
It must be:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready... read more
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requirements
Elegant and minimalist ring.
Algeria map approximately 10 mm high.
Thin and refined band.
Comfortable for everyday wear.
Smooth transitions between all parts.
Highly polished surfaces.
The map should appear to be floating between both sides of the ring with discreet connections.
Lightweight Optimization (Very Important)
The most important objective is to create the lightest possible ring.
Please optimize the design to reduce gold consumption as much as possible.
Requirements:
Reduce all unnecessary metal.
Thin band while maintaining strength.
Thin map thickness while keeping durability.
Minimal connection points.
Avoid bulky areas.
Uniform wall thickness.
Professional jewelry appearance.
Suitable for everyday wear.
The objective is to achieve the lowest casting weight possible without compromising quality.
Manufacturing Requirements
The model must be ready for professional jewelry production.
It must be:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready... read more
Hello,
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requirements
Elegant and minimalist ring.
Algeria map approximately 10 mm high.
Thin and refined band.
Comfortable for everyday wear.
Smooth transitions between all parts.
Highly polished surfaces.
The map should appear to be floating between both sides of the ring with discreet connections.
Lightweight Optimization (Very Important)
The most important objective is to create the lightest possible ring.
Please optimize the design to reduce gold consumption as much as possible.
Requirements:
Reduce all unnecessary metal.
Thin band while maintaining strength.
Thin map thickness while keeping durability.
Minimal connection points.
Avoid bulky areas.
Uniform wall thickness.
Professional jewelry appearance.
Suitable for everyday wear.
The objective is to achieve the lowest casting weight possible without compromising quality.
Manufacturing Requirements
The model must be ready for professional jewelry production.
It must be:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for lost wax casting
Compatible with CooksonGold production
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Additional Information
Please tell me:
Estimated weight in 9K gold (size 54)
Estimated weight in 18K gold (size 54)
Future Work
Please optimize this ring as if every gram of gold matters. The goal is to preserve a premium jewelry appearance while using the least amount of precious metal possible.
If this project is successful, I have several additional jewelry projects (rings, pendants and personalized collections). read less
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requirements
Elegant and minimalist ring.
Algeria map approximately 10 mm high.
Thin and refined band.
Comfortable for everyday wear.
Smooth transitions between all parts.
Highly polished surfaces.
The map should appear to be floating between both sides of the ring with discreet connections.
Lightweight Optimization (Very Important)
The most important objective is to create the lightest possible ring.
Please optimize the design to reduce gold consumption as much as possible.
Requirements:
Reduce all unnecessary metal.
Thin band while maintaining strength.
Thin map thickness while keeping durability.
Minimal connection points.
Avoid bulky areas.
Uniform wall thickness.
Professional jewelry appearance.
Suitable for everyday wear.
The objective is to achieve the lowest casting weight possible without compromising quality.
Manufacturing Requirements
The model must be ready for professional jewelry production.
It must be:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for lost wax casting
Compatible with CooksonGold production
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Additional Information
Please tell me:
Estimated weight in 9K gold (size 54)
Estimated weight in 18K gold (size 54)
Future Work
Please optimize this ring as if every gram of gold matters. The goal is to preserve a premium jewelry appearance while using the least amount of precious metal possible.
If this project is successful, I have several additional jewelry projects (rings, pendants and personalized collections). read less
Hello,
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requireme... read more
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requireme... read more
Hello,
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requirements
Elegant and minimalist ring.
Algeria map approximately 10 mm high.
Thin and refined band.
Comfortable for everyday wear.
Smooth transitions between all parts.
Highly polished surfaces.
The map should appear to be floating between both sides of the ring with discreet connections.
Lightweight Optimization (Very Important)
The most important objective is to create the lightest possible ring.
Please optimize the design to reduce gold consumption as much as possible.
Requirements:
Reduce all unnecessary metal.
Thin band while maintaining strength.
Thin map thickness while keeping durability.
Minimal connection points.
Avoid bulky areas.
Uniform wall thickness.
Professional jewelry appearance.
Suitable for everyday wear.
The objective is to achieve the lowest casting weight possible without compromising quality.
Manufacturing Requirements
The model must be ready for professional jewelry production.
It must be:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for lost wax casting
Compatible with CooksonGold production
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Additional Information
Please tell me:
Estimated weight in 9K gold (size 54)
Estimated weight in 18K gold (size 54)
Future Work
Please optimize this ring as if every gram of gold matters. The goal is to preserve a premium jewelry appearance while using the least amount of precious metal possible.
If this project is successful, I have several additional jewelry projects (rings, pendants and personalized collections). read less
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold using lost wax casting, so the model must be optimized to use the minimum amount of precious metal while remaining durable and elegant.
I have attached concept images showing the style I am looking for.
Design Requirements
Elegant and minimalist ring.
Algeria map approximately 10 mm high.
Thin and refined band.
Comfortable for everyday wear.
Smooth transitions between all parts.
Highly polished surfaces.
The map should appear to be floating between both sides of the ring with discreet connections.
Lightweight Optimization (Very Important)
The most important objective is to create the lightest possible ring.
Please optimize the design to reduce gold consumption as much as possible.
Requirements:
Reduce all unnecessary metal.
Thin band while maintaining strength.
Thin map thickness while keeping durability.
Minimal connection points.
Avoid bulky areas.
Uniform wall thickness.
Professional jewelry appearance.
Suitable for everyday wear.
The objective is to achieve the lowest casting weight possible without compromising quality.
Manufacturing Requirements
The model must be ready for professional jewelry production.
It must be:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for lost wax casting
Compatible with CooksonGold production
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Additional Information
Please tell me:
Estimated weight in 9K gold (size 54)
Estimated weight in 18K gold (size 54)
Future Work
Please optimize this ring as if every gram of gold matters. The goal is to preserve a premium jewelry appearance while using the least amount of precious metal possible.
If this project is successful, I have several additional jewelry projects (rings, pendants and personalized collections). read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Full-time
Job type
6+ months
Job duration
Areas of expertise
3D Jewelery CAD
3D Jewelery Rhinoceros
3D Jewelry Designer
Jewelry 3D Modeling
Jewelry CAD Design
Jewelry Design
+3 more
Job categories
Jewelry Design
Jewelry Design
3D Jewelry Rendering
About the client
Payment ready
France (07:41 am)
Posted
Active
Job activity
13 Applicants
0 interviews in progress
More open jobs from this client (2)
Square Bezel Ring – Lightweight Casting Optimization
Remote - Posted
Hello,
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference...
Jewelry Design
3D Jewelry Rendering
3D Product Rendering and Design
View job
Jewelry CAD Designer Needed – Long-Term Partnership
Remote - Posted
Hello,
My name is Jason Lai, founder of Mon Bijou Lacté, a French jewelry brand specializing in handcrafted keepsake jewelry.
We create custom jewelry in sterling silver...
3D Jewelry Rendering
Jewelry Design
3D Design Services
View job
Similar jobs
Square Bezel Ring – Lightweight Casting Optimization
Remote - Posted
Hello,
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference...
Jewelry Design
3D Jewelry Rendering
3D Product Rendering and Design
View job
Jewelry CAD Designer Needed – Long-Term Partnership
Remote - Posted
Hello,
My name is Jason Lai, founder of Mon Bijou Lacté, a French jewelry brand specializing in handcrafted keepsake jewelry.
We create custom jewelry in sterling silver...
3D Jewelry Rendering
Jewelry Design
3D Design Services
View job
Senior Jewelry CAD Designer
Remote - Posted
Senior Jewelry CAD Designer – De Vallière
About De Vallière
De Vallière is a new French fine jewelry house dedicated exclusively to exceptional natural diamonds.
Our...
3D Modeling
Jewelry Design
3D Jewelry Rendering
Jewelry Design
View job
Looking for Cad Designer
Remote - Posted
Jewelry CAD Designer Needed — [Ring / Pendant / Custom Fine Jewelry] Design
Project Overview
I'm looking for an experienced jewelry CAD designer to create production-ready...
Jewelry Design
Design & Drafting
General CAD Drafting
View job
The piece must function as both a necklace pendant and bracelet charm. Inspirations: Pomellato, Bron, Dodo. Quiet luxury. No visible technology. Fine jewelry first, safety function second.
Remote - Posted
Design Vision
Auralune creates meaningful jewelry that combines beauty, emotional value, and invisible protection.
The piece must never look like a safety device, wearab...
Jewelry Design
3D Product Rendering and Design
3D Jewelry Rendering
Jewelry Design
View job
Braids jewelry
Remote - Posted
I am looking for a 3d design and prototype for braids jewelry. I have one draw already but I am looking for the best clip system
3D Jewelry Rendering
3D Modeling
3D Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
198,833
global members
33,039
projects delivered to clients
Trusted by
