Remote
Work location
Square Bezel Ring – Lightweight Casting Optimization Anyone
About the job
Hello,
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and fully closed back under the stone
Simple, elegant and timeless design
Comfortable band with smooth transitions
Highly polished surfaces
Weight Optimization (Very Important)
This ring will be manufactured in 9K, 14K and 18K gold, therefore reducing the metal weight is extremely important.
Please optimize the model to use the minimum amount of metal possible while maintaining sufficient strength for everyday wear.
Please:
Keep the band as thin as safely possible.
Minimize the bezel wall thickness.
Reduce the thickness of the closed back as much as possible.
Remove any unnecessary internal metal.
Keep all wall thicknesses uniform whenever possible.
Avoid oversized or bulky areas.
Maintain a professional jewelry appearance despite the reduced weight.
The objective is to obtain the lowest possible casting weight without compromising durability.
Manufacturing Requirements
The model must be fully ready for professional lost wax casting.
Please ensure that the model is:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No du... read more
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and fully closed back under the stone
Simple, elegant and timeless design
Comfortable band with smooth transitions
Highly polished surfaces
Weight Optimization (Very Important)
This ring will be manufactured in 9K, 14K and 18K gold, therefore reducing the metal weight is extremely important.
Please optimize the model to use the minimum amount of metal possible while maintaining sufficient strength for everyday wear.
Please:
Keep the band as thin as safely possible.
Minimize the bezel wall thickness.
Reduce the thickness of the closed back as much as possible.
Remove any unnecessary internal metal.
Keep all wall thicknesses uniform whenever possible.
Avoid oversized or bulky areas.
Maintain a professional jewelry appearance despite the reduced weight.
The objective is to obtain the lowest possible casting weight without compromising durability.
Manufacturing Requirements
The model must be fully ready for professional lost wax casting.
Please ensure that the model is:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No du... read more
Hello,
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and fully closed back under the stone
Simple, elegant and timeless design
Comfortable band with smooth transitions
Highly polished surfaces
Weight Optimization (Very Important)
This ring will be manufactured in 9K, 14K and 18K gold, therefore reducing the metal weight is extremely important.
Please optimize the model to use the minimum amount of metal possible while maintaining sufficient strength for everyday wear.
Please:
Keep the band as thin as safely possible.
Minimize the bezel wall thickness.
Reduce the thickness of the closed back as much as possible.
Remove any unnecessary internal metal.
Keep all wall thicknesses uniform whenever possible.
Avoid oversized or bulky areas.
Maintain a professional jewelry appearance despite the reduced weight.
The objective is to obtain the lowest possible casting weight without compromising durability.
Manufacturing Requirements
The model must be fully ready for professional lost wax casting.
Please ensure that the model is:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for casting without repairs
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Bonus
Please also tell me the estimated metal weight for 9K gold (size 54) after optimization.
Please optimize the design as if you were manufacturing this ring for mass production, with the goal of achieving the lowest possible gold weight while preserving a premium jewelry appearance and everyday durability.
Thank you! read less
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and fully closed back under the stone
Simple, elegant and timeless design
Comfortable band with smooth transitions
Highly polished surfaces
Weight Optimization (Very Important)
This ring will be manufactured in 9K, 14K and 18K gold, therefore reducing the metal weight is extremely important.
Please optimize the model to use the minimum amount of metal possible while maintaining sufficient strength for everyday wear.
Please:
Keep the band as thin as safely possible.
Minimize the bezel wall thickness.
Reduce the thickness of the closed back as much as possible.
Remove any unnecessary internal metal.
Keep all wall thicknesses uniform whenever possible.
Avoid oversized or bulky areas.
Maintain a professional jewelry appearance despite the reduced weight.
The objective is to obtain the lowest possible casting weight without compromising durability.
Manufacturing Requirements
The model must be fully ready for professional lost wax casting.
Please ensure that the model is:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for casting without repairs
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Bonus
Please also tell me the estimated metal weight for 9K gold (size 54) after optimization.
Please optimize the design as if you were manufacturing this ring for mass production, with the goal of achieving the lowest possible gold weight while preserving a premium jewelry appearance and everyday durability.
Thank you! read less
Hello,
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and f... read more
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and f... read more
Hello,
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and fully closed back under the stone
Simple, elegant and timeless design
Comfortable band with smooth transitions
Highly polished surfaces
Weight Optimization (Very Important)
This ring will be manufactured in 9K, 14K and 18K gold, therefore reducing the metal weight is extremely important.
Please optimize the model to use the minimum amount of metal possible while maintaining sufficient strength for everyday wear.
Please:
Keep the band as thin as safely possible.
Minimize the bezel wall thickness.
Reduce the thickness of the closed back as much as possible.
Remove any unnecessary internal metal.
Keep all wall thicknesses uniform whenever possible.
Avoid oversized or bulky areas.
Maintain a professional jewelry appearance despite the reduced weight.
The objective is to obtain the lowest possible casting weight without compromising durability.
Manufacturing Requirements
The model must be fully ready for professional lost wax casting.
Please ensure that the model is:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for casting without repairs
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Bonus
Please also tell me the estimated metal weight for 9K gold (size 54) after optimization.
Please optimize the design as if you were manufacturing this ring for mass production, with the goal of achieving the lowest possible gold weight while preserving a premium jewelry appearance and everyday durability.
Thank you! read less
I am looking for a professional jewelry CAD designer to create a square bezel ring optimized for lost wax casting.
The design should follow the attached reference images, but the priority is to make the ring as lightweight as possible while keeping it elegant, durable and comfortable for everyday wear.
Design Requirements
Square bezel for a 6.5 × 6.5 mm square cabochon
Flat and fully closed back under the stone
Simple, elegant and timeless design
Comfortable band with smooth transitions
Highly polished surfaces
Weight Optimization (Very Important)
This ring will be manufactured in 9K, 14K and 18K gold, therefore reducing the metal weight is extremely important.
Please optimize the model to use the minimum amount of metal possible while maintaining sufficient strength for everyday wear.
Please:
Keep the band as thin as safely possible.
Minimize the bezel wall thickness.
Reduce the thickness of the closed back as much as possible.
Remove any unnecessary internal metal.
Keep all wall thicknesses uniform whenever possible.
Avoid oversized or bulky areas.
Maintain a professional jewelry appearance despite the reduced weight.
The objective is to obtain the lowest possible casting weight without compromising durability.
Manufacturing Requirements
The model must be fully ready for professional lost wax casting.
Please ensure that the model is:
Fully watertight (closed manifold)
No non-manifold edges
No intersecting faces
No duplicate vertices
No inverted normals
Ready for casting without repairs
Ring Sizes
Please provide the following EU sizes:
50
52
54
56
60
62
Files Required
Please provide:
High-resolution STL
STEP (.stp)
3DM (Rhino)
Bonus
Please also tell me the estimated metal weight for 9K gold (size 54) after optimization.
Please optimize the design as if you were manufacturing this ring for mass production, with the goal of achieving the lowest possible gold weight while preserving a premium jewelry appearance and everyday durability.
Thank you! read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Full-time
Job type
6+ months
Job duration
Areas of expertise
2d to 3D CAD Modeling
3D Jewelery Design
3D Jewelery Rhinoceros
3D Jewelry Designer
3D Jewelry Modeling
3D Printing / STL
CAD to STL
Gemvision Matrix Gold
Jewelry CAD
Matrix / MatrixGold
Rhinoceros (Rhino 3D)
+8 more
Job categories
Jewelry Design
3D Jewelry Rendering
3D Product Rendering and Design
About the client
Payment ready
France (11:20 pm)
Posted
Active
Job activity
27 Applicants
0 interviews in progress
More open jobs from this client (2)
Jewelry CAD Designer Needed – Algeria Map Ring (Lightweight for Lost Wax Casting)
Remote - Posted
Hello,
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold...
Jewelry Design
Jewelry Design
3D Jewelry Rendering
View job
Jewelry CAD Designer Needed – Long-Term Partnership
Remote - Posted
Hello,
My name is Jason Lai, founder of Mon Bijou Lacté, a French jewelry brand specializing in handcrafted keepsake jewelry.
We create custom jewelry in sterling silver...
3D Jewelry Rendering
Jewelry Design
3D Design Services
View job
Similar jobs
Design and Technical Development of a Perfume Bottle
Remote - Posted
Design and technical development of an aesthetically distinctive and production-ready perfume bottle cap inspired by mountain landscapes.
The selected designer will be res...
3D Design Services
Industrial Design Services
Cosmetic Packaging Design
3D Product Rendering and Design
View job
Jewelry CAD Designer Needed – Algeria Map Ring (Lightweight for Lost Wax Casting)
Remote - Posted
Hello,
I am looking for an experienced Jewelry CAD Designer to create a custom ring featuring the map of Algeria.
This ring will be manufactured in 9K, 14K and 18K gold...
Jewelry Design
Jewelry Design
3D Jewelry Rendering
View job
Jewelry CAD Designer Needed – Long-Term Partnership
Remote - Posted
Hello,
My name is Jason Lai, founder of Mon Bijou Lacté, a French jewelry brand specializing in handcrafted keepsake jewelry.
We create custom jewelry in sterling silver...
3D Jewelry Rendering
Jewelry Design
3D Design Services
View job
Freelance CAD Designer for Glass Truck
Remote - Posted
Freelance CAD Designer Needed – Glass Box Truck Interior (Paid)
We're looking for an experienced CAD / Industrial / Exhibit Designer to create fabrication-ready drawings fo...
3D Product Rendering and Design
AutoCAD Design Services
3D Design Services
View job
3D CAD Design for 3-Piece Cast Iron Cookware Set (10-Qt Pot, 7-Qt Skillet, 5.5-Qt Sauce Pot)
Remote - Posted
I am seeking an expert designer to create precise, manufacturing-ready 3D CAD files for a three-piece cast iron cookware set, which includes:
A 10-quart large pot
A 7-quar...
3D Product Modeling
Manufacturing Drawings
Design for Manufacturability (DFM Services)
3D Product Rendering and Design
View job
3D Visualization Artist - Photorealistic Furniture Renders & Animation
Remote - Posted
Looking for a 3D artist to produce hyper-realistic renders and short animations of modular furniture pieces, for use in presentations and marketing materials.
Scope:
-Photor...
3D Rendering Services
3D Furniture Modeling Services
3D Furniture Rendering
3D Product Rendering and Design
3D Visualization Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
198,956
global members
33,059
projects delivered to clients
Trusted by
