Remote
Work location
Product Design Engineer for BESS products in the 261 kWh and 562 kWh Anyone
About the job
We are seeking a highly motivated and experienced BESS Product Design Engineer to lead the design and development of Battery Energy Storage System (BESS) products in the 261 kWh and 562 kWh capacity range for commercial and industrial (C&I), renewable integration, and microgrid applications.
The candidate will be responsible for complete product engineering, system architecture, electrical and mechanical design, component selection, compliance, documentation, and support for product certification and manufacturing.
Key Responsibilities
System Design & Engineering
Design and develop containerized and cabinet-based BESS solutions ranging from 261 kWh to 562 kWh.
Define system architecture including Battery Packs, Racks, BMS, PCS, EMS, HVAC, Fire Suppression System (FSS), and auxiliary systems.
Prepare electrical single-line diagrams (SLD), wiring schematics, and interconnection drawings.
Develop battery pack, rack, and enclosure configurations based on LFP cells (314 Ah, 280 Ah, 628 Ah, etc.).
Perform DC and AC system sizing, short-circuit calculations, protection coordination, and thermal calculations.
Mechanical Design
Develop GA drawings, assembly drawings, and 3D models using AutoCAD, SolidWorks, or equivalent software.
Design battery cabinets, rack structures, cable routing, cooling arrangements, and maintenance access.
Coordinate enclosure design considering IP rating, thermal management, and fire safety requirements.
Documentation & Compliance
Prepare c... read more
The candidate will be responsible for complete product engineering, system architecture, electrical and mechanical design, component selection, compliance, documentation, and support for product certification and manufacturing.
Key Responsibilities
System Design & Engineering
Design and develop containerized and cabinet-based BESS solutions ranging from 261 kWh to 562 kWh.
Define system architecture including Battery Packs, Racks, BMS, PCS, EMS, HVAC, Fire Suppression System (FSS), and auxiliary systems.
Prepare electrical single-line diagrams (SLD), wiring schematics, and interconnection drawings.
Develop battery pack, rack, and enclosure configurations based on LFP cells (314 Ah, 280 Ah, 628 Ah, etc.).
Perform DC and AC system sizing, short-circuit calculations, protection coordination, and thermal calculations.
Mechanical Design
Develop GA drawings, assembly drawings, and 3D models using AutoCAD, SolidWorks, or equivalent software.
Design battery cabinets, rack structures, cable routing, cooling arrangements, and maintenance access.
Coordinate enclosure design considering IP rating, thermal management, and fire safety requirements.
Documentation & Compliance
Prepare c... read more
We are seeking a highly motivated and experienced BESS Product Design Engineer to lead the design and development of Battery Energy Storage System (BESS) products in the 261 kWh and 562 kWh capacity range for commercial and industrial (C&I), renewable integration, and microgrid applications.
The candidate will be responsible for complete product engineering, system architecture, electrical and mechanical design, component selection, compliance, documentation, and support for product certification and manufacturing.
Key Responsibilities
System Design & Engineering
Design and develop containerized and cabinet-based BESS solutions ranging from 261 kWh to 562 kWh.
Define system architecture including Battery Packs, Racks, BMS, PCS, EMS, HVAC, Fire Suppression System (FSS), and auxiliary systems.
Prepare electrical single-line diagrams (SLD), wiring schematics, and interconnection drawings.
Develop battery pack, rack, and enclosure configurations based on LFP cells (314 Ah, 280 Ah, 628 Ah, etc.).
Perform DC and AC system sizing, short-circuit calculations, protection coordination, and thermal calculations.
Mechanical Design
Develop GA drawings, assembly drawings, and 3D models using AutoCAD, SolidWorks, or equivalent software.
Design battery cabinets, rack structures, cable routing, cooling arrangements, and maintenance access.
Coordinate enclosure design considering IP rating, thermal management, and fire safety requirements.
Documentation & Compliance
Prepare complete technical documentation including:
Technical Datasheets
Bill of Materials (BoM)
GA Drawings
Electrical Schematics
Cable Schedules
Installation & O&M Manuals
Ensure compliance with applicable standards such as IEC 62933, IEC 62619, IEC 62477, IEC 61000, UL 9540, UL 9540A, NFPA 855, and BIS requirements.
Product Development & Validation
Support prototype development, testing, FAT, and product validation.
Coordinate with suppliers for battery cells, BMS, PCS, HVAC, FSS, and enclosure manufacturing.
Analyze field performance and implement design improvements.
Required Qualifications
Bachelor's or Master's Degree in Electrical Engineering, Electronics Engineering, Energy Engineering, Mechanical Engineering, or related field.
3–8 years of experience in BESS, EV battery systems, power electronics, renewable energy, or related industries.
Strong understanding of:
Lithium-ion battery technologies (LFP preferred)
Battery Management Systems (BMS)
Power Conversion Systems (PCS)
EMS/SCADA integration
Thermal management systems
Protection and control schemes
Software Skills
AutoCAD Electrical
SolidWorks / Creo / Inventor
ETAP / DIgSILENT / PSCAD (preferred)
MS Excel and technical documentation tools
Preferred Experience
Experience designing 125 kW / 261 kWh and 250 kW / 562 kWh BESS products.
Knowledge of liquid-cooled and air-cooled BESS architectures.
Experience with product certification and testing.
Familiarity with solar + storage and microgrid applications.
Deliverables
Complete BESS Product Design Package
Electrical Schematic Drawings
General Arrangement (GA) Drawings
3D Models and Manufacturing Drawings
Bill of Materials (BoM)
Technical Datasheets
Compliance Documentation
Installation & O&M Manuals
Location read less
The candidate will be responsible for complete product engineering, system architecture, electrical and mechanical design, component selection, compliance, documentation, and support for product certification and manufacturing.
Key Responsibilities
System Design & Engineering
Design and develop containerized and cabinet-based BESS solutions ranging from 261 kWh to 562 kWh.
Define system architecture including Battery Packs, Racks, BMS, PCS, EMS, HVAC, Fire Suppression System (FSS), and auxiliary systems.
Prepare electrical single-line diagrams (SLD), wiring schematics, and interconnection drawings.
Develop battery pack, rack, and enclosure configurations based on LFP cells (314 Ah, 280 Ah, 628 Ah, etc.).
Perform DC and AC system sizing, short-circuit calculations, protection coordination, and thermal calculations.
Mechanical Design
Develop GA drawings, assembly drawings, and 3D models using AutoCAD, SolidWorks, or equivalent software.
Design battery cabinets, rack structures, cable routing, cooling arrangements, and maintenance access.
Coordinate enclosure design considering IP rating, thermal management, and fire safety requirements.
Documentation & Compliance
Prepare complete technical documentation including:
Technical Datasheets
Bill of Materials (BoM)
GA Drawings
Electrical Schematics
Cable Schedules
Installation & O&M Manuals
Ensure compliance with applicable standards such as IEC 62933, IEC 62619, IEC 62477, IEC 61000, UL 9540, UL 9540A, NFPA 855, and BIS requirements.
Product Development & Validation
Support prototype development, testing, FAT, and product validation.
Coordinate with suppliers for battery cells, BMS, PCS, HVAC, FSS, and enclosure manufacturing.
Analyze field performance and implement design improvements.
Required Qualifications
Bachelor's or Master's Degree in Electrical Engineering, Electronics Engineering, Energy Engineering, Mechanical Engineering, or related field.
3–8 years of experience in BESS, EV battery systems, power electronics, renewable energy, or related industries.
Strong understanding of:
Lithium-ion battery technologies (LFP preferred)
Battery Management Systems (BMS)
Power Conversion Systems (PCS)
EMS/SCADA integration
Thermal management systems
Protection and control schemes
Software Skills
AutoCAD Electrical
SolidWorks / Creo / Inventor
ETAP / DIgSILENT / PSCAD (preferred)
MS Excel and technical documentation tools
Preferred Experience
Experience designing 125 kW / 261 kWh and 250 kW / 562 kWh BESS products.
Knowledge of liquid-cooled and air-cooled BESS architectures.
Experience with product certification and testing.
Familiarity with solar + storage and microgrid applications.
Deliverables
Complete BESS Product Design Package
Electrical Schematic Drawings
General Arrangement (GA) Drawings
3D Models and Manufacturing Drawings
Bill of Materials (BoM)
Technical Datasheets
Compliance Documentation
Installation & O&M Manuals
Location read less
We are seeking a highly motivated and experienced BESS Product Design Engineer to lead the design and development of Battery Energy Storage System (BESS) products in the 261 kWh and 562 kWh capacity range for commercial and industrial (C&I), renewable integration, and microgrid applications.
The candidate will be responsible for complete product engineering, system architecture, electrical and... read more
The candidate will be responsible for complete product engineering, system architecture, electrical and... read more
We are seeking a highly motivated and experienced BESS Product Design Engineer to lead the design and development of Battery Energy Storage System (BESS) products in the 261 kWh and 562 kWh capacity range for commercial and industrial (C&I), renewable integration, and microgrid applications.
The candidate will be responsible for complete product engineering, system architecture, electrical and mechanical design, component selection, compliance, documentation, and support for product certification and manufacturing.
Key Responsibilities
System Design & Engineering
Design and develop containerized and cabinet-based BESS solutions ranging from 261 kWh to 562 kWh.
Define system architecture including Battery Packs, Racks, BMS, PCS, EMS, HVAC, Fire Suppression System (FSS), and auxiliary systems.
Prepare electrical single-line diagrams (SLD), wiring schematics, and interconnection drawings.
Develop battery pack, rack, and enclosure configurations based on LFP cells (314 Ah, 280 Ah, 628 Ah, etc.).
Perform DC and AC system sizing, short-circuit calculations, protection coordination, and thermal calculations.
Mechanical Design
Develop GA drawings, assembly drawings, and 3D models using AutoCAD, SolidWorks, or equivalent software.
Design battery cabinets, rack structures, cable routing, cooling arrangements, and maintenance access.
Coordinate enclosure design considering IP rating, thermal management, and fire safety requirements.
Documentation & Compliance
Prepare complete technical documentation including:
Technical Datasheets
Bill of Materials (BoM)
GA Drawings
Electrical Schematics
Cable Schedules
Installation & O&M Manuals
Ensure compliance with applicable standards such as IEC 62933, IEC 62619, IEC 62477, IEC 61000, UL 9540, UL 9540A, NFPA 855, and BIS requirements.
Product Development & Validation
Support prototype development, testing, FAT, and product validation.
Coordinate with suppliers for battery cells, BMS, PCS, HVAC, FSS, and enclosure manufacturing.
Analyze field performance and implement design improvements.
Required Qualifications
Bachelor's or Master's Degree in Electrical Engineering, Electronics Engineering, Energy Engineering, Mechanical Engineering, or related field.
3–8 years of experience in BESS, EV battery systems, power electronics, renewable energy, or related industries.
Strong understanding of:
Lithium-ion battery technologies (LFP preferred)
Battery Management Systems (BMS)
Power Conversion Systems (PCS)
EMS/SCADA integration
Thermal management systems
Protection and control schemes
Software Skills
AutoCAD Electrical
SolidWorks / Creo / Inventor
ETAP / DIgSILENT / PSCAD (preferred)
MS Excel and technical documentation tools
Preferred Experience
Experience designing 125 kW / 261 kWh and 250 kW / 562 kWh BESS products.
Knowledge of liquid-cooled and air-cooled BESS architectures.
Experience with product certification and testing.
Familiarity with solar + storage and microgrid applications.
Deliverables
Complete BESS Product Design Package
Electrical Schematic Drawings
General Arrangement (GA) Drawings
3D Models and Manufacturing Drawings
Bill of Materials (BoM)
Technical Datasheets
Compliance Documentation
Installation & O&M Manuals
Location read less
The candidate will be responsible for complete product engineering, system architecture, electrical and mechanical design, component selection, compliance, documentation, and support for product certification and manufacturing.
Key Responsibilities
System Design & Engineering
Design and develop containerized and cabinet-based BESS solutions ranging from 261 kWh to 562 kWh.
Define system architecture including Battery Packs, Racks, BMS, PCS, EMS, HVAC, Fire Suppression System (FSS), and auxiliary systems.
Prepare electrical single-line diagrams (SLD), wiring schematics, and interconnection drawings.
Develop battery pack, rack, and enclosure configurations based on LFP cells (314 Ah, 280 Ah, 628 Ah, etc.).
Perform DC and AC system sizing, short-circuit calculations, protection coordination, and thermal calculations.
Mechanical Design
Develop GA drawings, assembly drawings, and 3D models using AutoCAD, SolidWorks, or equivalent software.
Design battery cabinets, rack structures, cable routing, cooling arrangements, and maintenance access.
Coordinate enclosure design considering IP rating, thermal management, and fire safety requirements.
Documentation & Compliance
Prepare complete technical documentation including:
Technical Datasheets
Bill of Materials (BoM)
GA Drawings
Electrical Schematics
Cable Schedules
Installation & O&M Manuals
Ensure compliance with applicable standards such as IEC 62933, IEC 62619, IEC 62477, IEC 61000, UL 9540, UL 9540A, NFPA 855, and BIS requirements.
Product Development & Validation
Support prototype development, testing, FAT, and product validation.
Coordinate with suppliers for battery cells, BMS, PCS, HVAC, FSS, and enclosure manufacturing.
Analyze field performance and implement design improvements.
Required Qualifications
Bachelor's or Master's Degree in Electrical Engineering, Electronics Engineering, Energy Engineering, Mechanical Engineering, or related field.
3–8 years of experience in BESS, EV battery systems, power electronics, renewable energy, or related industries.
Strong understanding of:
Lithium-ion battery technologies (LFP preferred)
Battery Management Systems (BMS)
Power Conversion Systems (PCS)
EMS/SCADA integration
Thermal management systems
Protection and control schemes
Software Skills
AutoCAD Electrical
SolidWorks / Creo / Inventor
ETAP / DIgSILENT / PSCAD (preferred)
MS Excel and technical documentation tools
Preferred Experience
Experience designing 125 kW / 261 kWh and 250 kW / 562 kWh BESS products.
Knowledge of liquid-cooled and air-cooled BESS architectures.
Experience with product certification and testing.
Familiarity with solar + storage and microgrid applications.
Deliverables
Complete BESS Product Design Package
Electrical Schematic Drawings
General Arrangement (GA) Drawings
3D Models and Manufacturing Drawings
Bill of Materials (BoM)
Technical Datasheets
Compliance Documentation
Installation & O&M Manuals
Location read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
1-3 months
Job duration
Areas of expertise
3D Models
Assembly Drawings
AutoCAD
Battery Pack Design
Bill of Materials (BOM)
Cable Routing
+3 more
Job categories
Mechanical Design Services
Mechanical Engineering
Engineering Design
About the client
Payment not ready
India (03:13 am)
Posted
Active
Job activity
8 Applicants
0 interviews in progress
7 unanswered invites
Similar jobs
Design & Development of a Compact Liquid Dispensing Mechanism
Remote - Posted
I am looking for an experienced mechanical engineer to develop a compact liquid dispensing mechanism.
The mechanism will be operated through a rotational movement and must...
Mechanical Engineering
Mechanical Design Services
Product Engineering Services
View job
tractor trolley design
Remote - Posted
want a design for tractor trolley with proper manufacturing document
Industrial Design Services
3D Modeling
Mechanical Design Services
View job
CAD and electronics for Smart Pill Dispenser (Prototype Stage)
Remote - Posted
Project overview
- Developing a smart electronically controlled weekly medication dispenser targeting elderly and NDIS-eligible users. I am seeking an experienced embedded sy...
Mechanical Design Services
Prototype Design Services
Electronics Design Service
View job
Thermal Calculation of Gas Condesner
Remote - Posted
I need a thermal calculation from a gascondesner with Apsen oder HTRi included Tema Datasheet
Mechanical Engineering
Design Engineering Services
Computational Fluid Dynamics
Engineering Design
View job
Mechanical Engineer
Remote - Posted
Job Responsibilities:
Responsible for automated machine design and development using SolidWorks software.
Support new machine design concept and proposals.
Responsible for...
Mechanical Engineering
Engineering Design
Design Engineering Services
View job
Industrial Designer for BIISON NEO PET Blowmolding Machine Enclosure Concepts (Confidential)
Remote - Posted
We are looking for an experienced Industrial Designer to develop 3–4 high-impact concept renderings for the enclosure of our **BIISON NEO** — a high-output two-stage reheat PE...
Industrial Design Services
Concept Design
Mechanical Design Services
Design Engineering Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
196,529
global members
32,886
projects delivered to clients
Trusted by
