Hire the best freelance Tinkercad expert designers for your company

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

Mechanical design and CAD specialist with a Mechatronics Engineering background and over 4 years of hands-on experience in SolidWorks, 3D printing, and prototyping. Certified by Dassault Systèmes (CSW... Read more

Mechanical design and CAD specialist with a Mechatronics Engineering background and over 4 years of hands-on experience in SolidWorks, 3D printing, and prototyping. Certified by Dassault Systèmes (CSWA, Additive Manufacturing, Sustainability). I’ve led interdisciplinary R&D projects, participated on Bolivia’s first CubeSat and award-winning NASA HERC team, and developed functional parts for clients and research. Passionate about precision modeling, real-world engineering impact, and bringing complex ideas to life through CAD and prototyping.

I have worked with Autodesk inventor, Onshape, Fusions 360, TinkerCAD. I am studying mechanical engineering at OSU. I am 17 and I am always open to accept challenge and opportunities.

I have worked with Autodesk inventor, Onshape, Fusions 360, TinkerCAD. I am studying mechanical engineering at OSU. I am 17 and I am always open to accept challenge and opportunities.

Hey, I’m Mitesh — a Mechanical Engineer with a Master’s in Dynamics & Controls from NC State, and 3+ years of hands-on experience working in the US before moving back to India to start my own design a... Read more

Hey, I’m Mitesh — a Mechanical Engineer with a Master’s in Dynamics & Controls from NC State, and 3+ years of hands-on experience working in the US before moving back to India to start my own design and prototyping company, Stratified 3D. I specialize in turning rough ideas and napkin sketches into functional, ready-to-manufacture CAD models. I work mainly on SolidWorks, with a strong grip on mechanical design, enclosures for electronics, and prototyping for startups. Whether it’s for pitch decks, investor demos, or production trials — I’ve designed enclosures, mechanisms, and 3D printed prototypes across industries. I don’t believe in overcomplicating things. I believe in solving problems, meeting deadlines, and delivering solid, manufacturable results. If you’re a founder, engineer, or maker looking for someone who understands both product design and business — let’s talk.

I specialize in creating high-quality PCB enclosures and delivering reverse-engineered circuit designs that meet precise technical and aesthetic requirements. Using tools like Tinkercad and Fritzing,... Read more

I specialize in creating high-quality PCB enclosures and delivering reverse-engineered circuit designs that meet precise technical and aesthetic requirements. Using tools like Tinkercad and Fritzing, I transform concepts into accurate, manufacturable models ready for prototyping or production. My services include: Custom PCB enclosure design for optimal fit, durability, and usability. Reverse engineering of existing circuits to create detailed schematics and design files. 3D modeling and visualization for clear presentation of design concepts. Integration of Tinkercad and Fritzing workflows to ensure accurate layouts and component placement. Design optimization for functionality, manufacturing, and cost efficiency. With a strong attention to detail and a focus on functionality, precision, and innovation, I deliver designs that help clients move seamlessly from idea to production. Whether you need a fully customized enclosure, a circuit redesign, or a reverse-engineered solution, I ensure results that align with your technical needs and project goals.

I am a CAD designer and 3D printing specialist focused on creating custom parts, prototypes, and scale model components. I have hands-on experience designing and producing detailed 3D models, particul... Read more

I am a CAD designer and 3D printing specialist focused on creating custom parts, prototypes, and scale model components. I have hands-on experience designing and producing detailed 3D models, particularly in automotive and scale builds. My work includes designing custom 1:18 scale car parts, modifications, and functional components for 3D printing. I understand how to design parts that not only look accurate but also print reliably and fit correctly in real-world applications. I can help with: Custom 3D printable parts (STL files) Scale model components and modifications Product prototypes and concept models Fixing or improving existing 3D designs I use tools such as Tinkercad and CAD-based workflows to create clean, printable designs, and I am comfortable adjusting models to meet specific requirements. I am reliable, detail-focused, and committed to delivering high-quality work that meets your needs. Whether you need a one-off part or ongoing support, I am ready to help.

I'm a high schooler with 4 years of experience in fusion 360 and can develop models fairly quickly. I primarily design drones that are more endurance focused.

I'm a high schooler with 4 years of experience in fusion 360 and can develop models fairly quickly. I primarily design drones that are more endurance focused.

Kunal Dhaneshwar is a BIW fixture designer from India. Hands on experience on Catia V5 part design,3D modeling, Drafting, Generative shape design. Currently trying to get some design work.

Kunal Dhaneshwar is a BIW fixture designer from India. Hands on experience on Catia V5 part design,3D modeling, Drafting, Generative shape design. Currently trying to get some design work.

Hi, I’m Reed Elias from Omaha, Nebraska. I’m a Drafting and Design major pursuing a career as a CAD engineer, with hands-on experience in design, manufacturing, and problem-solving. I enjoy taking com... Read more

Hi, I’m Reed Elias from Omaha, Nebraska. I’m a Drafting and Design major pursuing a career as a CAD engineer, with hands-on experience in design, manufacturing, and problem-solving. I enjoy taking complex ideas and turning them into practical, efficient solutions. My projects range from 3D-printed prototypes to industrial products, and I’m always looking for ways to combine creativity with technical skill to improve processes and designs.

I started my 2d and 3d modeling journey as a freshman in high school back in 2003. I have learned many 3d programs since then and many manufacturing processes throughout high school and college. Now l... Read more

I started my 2d and 3d modeling journey as a freshman in high school back in 2003. I have learned many 3d programs since then and many manufacturing processes throughout high school and college. Now life takes me in a career of teaching 3d modeling daily to high school students. I would love to create 3d models to help everyday people with everyday problems. I have helped many by creating fixes for existing things and created solutions to many problems family members or colleagues have using 3d modeling and 3d printing. Can’t wait to see what you will have me create!

I am basically a CAD designer passed from Coventry University, UK as Master of Science in Automotive Engineering with 2 years of working experience. Right now i have my own partnership firm "Sparkbee... Read more

I am basically a CAD designer passed from Coventry University, UK as Master of Science in Automotive Engineering with 2 years of working experience. Right now i have my own partnership firm "Sparkbee Technologies". We are mainly focused on science, technology, design and creative based sales and services. We provide hands on based on science and technology to school students and also job oriented training to all science and engineering students. We have set up our own Makerhive labs all over the city (Guwahati, Assam, India). Our upcoming project is to develop our own autonomous robotic kit. Future goals is to move towards product development and set up our own industries. I am also working as a guest faculty in Nits Mirza Engineering College( Guwahati University)

Computer-Aided Design (CAD) Education Design Testing Simulations 3D Printing 3D Modeling 3D Rendering Automotive Test Automation Machining Troubleshooting Research and Development (R&D) Graphic Design... Read more

Computer-Aided Design (CAD) Education Design Testing Simulations 3D Printing 3D Modeling 3D Rendering Automotive Test Automation Machining Troubleshooting Research and Development (R&D) Graphic Design Product Development Mechanical Engineering Global Positioning System (GPS) Tools & Technologies CATIA SolidWorks Onshape AutoCAD Microsoft Office Autodesk Fusion 360 STEM Additive Manufacturing Keyshot Design for Assembly Scratch Fuel Management lathe operations welding techniques robotic technology mit app inventor

I'm a Mechatronics Engineer with a solid background in electrical systems and 3D modeling. I've worked with different companies and individuals on various projects, like automation, robotics, and prod... Read more

I'm a Mechatronics Engineer with a solid background in electrical systems and 3D modeling. I've worked with different companies and individuals on various projects, like automation, robotics, and product design. I'm good at using CAD software, prototyping, and system integration. I love finding new ways to innovate and making sure my solutions meet what clients need. I'm always open to teamwork and ready for new challenges.

15 years experience in art, graphic design, branding, ATL, BTL, prototyping, and 3D printing.

15 years experience in art, graphic design, branding, ATL, BTL, prototyping, and 3D printing.

I am a 4th year undergraduate at the University of Florida studying mechanical engineering. I have been working in a research lab for the past two years where we design and manufacture survey drones.... Read more

I am a 4th year undergraduate at the University of Florida studying mechanical engineering. I have been working in a research lab for the past two years where we design and manufacture survey drones. Looking for experience and some extra cash to pay rent while I finish my degree.

Hi there. Welcome to John O.T. 3D . You can check out my pro work here http://johnot.viewbook.com/album/johnot-3dmodel . I am a professional 3D Technical & Product designer of over 4 years with over... Read more

Hi there. Welcome to John O.T. 3D . You can check out my pro work here http://johnot.viewbook.com/album/johnot-3dmodel . I am a professional 3D Technical & Product designer of over 4 years with over 100 successful clients. I have experience with elite universities, Fortune 500 companies, and visionary entrepreneurs. I am avid lover of 3D with specialization in Data to Prototype 3D design, Product design, Toy design, Consumer Product Design, and Industrial Design. I have extensive experience in the field and work with visionary minded entrepreneurs, startups, universities, and large scale business operations. For further introduction please review a sample walkthrough of my 3D services. I look forward to working with you! STAGES - A project of this nature will have a few steps. If we work together on each step I can design & produce the product(s) you desire with the correct specifications. 1. PrePro- To exact firm measurements, it is first smart for us to isolate the correct production methods and optimization requirements for the final product(s). Material selection, thickness requirements, Bounding Boxes, and Volume are all necessary ingredients in this process. I can, in this preliminary phase, supply useful and applicable knowledge. This will pre-tell the printing cost and allow us to pick the best material and 3d printing house. 2. 3D Modeling- I will be able to design the various model(s) you've suggested. I use a combination of BLENDER, RHINO, MESHLAB, and NETFABB to create, edit, and check models. Each model at this stage will have been checked for printing capability. Questions about aesthetic, structure, and dynamic usually arrive during this stage. At the conclusion of this phase specifications and look are nailed down and readied for 3d printing. 3. 3D Print Formatting - During this last stage model(s) are checked for errors, (thin walls, holes, bad normals, floating pieces, etc.) I send all model(s) through a verified test printability test to ensure 100% printability. Models are thickened, sized and cleaned and given the green light at the end of this stage. 4. Let's Chat! Please view the attached. I have prepared a detailed guide that addresses many topics such as rates, deadlines, and correspondence expectations. This doc will outline how we may best work together on the project. I can happily forward you this term sheet as I see interest to move forward.

I am a Mechanical Design Engineer with expertise in CAD, CAM, and Simulation, specializing in product development, enclosure design, and prototyping. With experience across both mechanical and electro... Read more

I am a Mechanical Design Engineer with expertise in CAD, CAM, and Simulation, specializing in product development, enclosure design, and prototyping. With experience across both mechanical and electronics-integrated projects, I bring a multidisciplinary approach to design challenges. Over the past few years, I have worked on: Plastic and sheet-metal product design (consumer products, turnstile systems, LED enclosures) IP-rated enclosure development for underwater and industrial applications IoT & embedded integration using Raspberry Pi, Rockchip, ESP32 and Allwinner platforms Robotics and sensor-based prototypes (ultrasonic, IR, automation concepts) My process covers the full product cycle: Concept → 3D CAD modeling → Simulation/validation → Prototyping → Production support I am comfortable working independently in remote setups and have delivered successful freelance projects globally. My focus is always on high-quality, detail-oriented design with reliable communication and timely delivery

Hello! 👋 Myself Zain Abbas. I am a graphics designer.🏆I have been in this field for about 3 years🏆. I do 3d designing in Autodesk TINKERCAD and FUSION 360. I have good grip and knowledge about thes... Read more

Hello! 👋 Myself Zain Abbas. I am a graphics designer.🏆I have been in this field for about 3 years🏆. I do 3d designing in Autodesk TINKERCAD and FUSION 360. I have good grip and knowledge about these softwares. I an design almost any thing in these two softwares. Tinkercad is basic best tool for creating STL files and fusion 360 is an advance industrial level software. I have worked on other freelance Platforms to build up my experience and now I am fully confident and passionate to work with CADCROWD clients also. I have prepared myself for both short-term and long-term projects🤝. WHAT YOU WILL GET? ✅ 3D Models of anything. ✅ Designs for 3d printing. ✅ 3D CAD. ✅ Design on tinkercad. ✅ Design on fusion 360. ✅ Rendered pictures of the design. ✅ Robotics Projects. ✅ 3D Printing projects. ✅ Industrial and Product design. ✅ Product Design. ✅ Mechanical Design. ✅ Furniture Design. ✅ Enclosure design. ✅ Product casing design. ✅ Creating Ready stl file. ✅ Design animation. WHY ME? ✅ Experienced in related niche. ✅ Have done tons of projects in tinkercad and fusion 360. ✅ Available almost anytime. ✅ Can be your Full-time Freelancer for your project. ✅ Faster response rate. ✅ Reliable and trustworthy. Thanks for visiting my profile. I hope you got everything you was looking for. I am looking forward to client's message to assist them. Best Regards, ZAIN ABBAS.

Bilingual Mechanical Engineer pursuing a double degree in Electronic Engineering with professional experience in the design and manufacturing of mechanical components for unmanned aerial vehicles (UAV... Read more

Bilingual Mechanical Engineer pursuing a double degree in Electronic Engineering with professional experience in the design and manufacturing of mechanical components for unmanned aerial vehicles (UAVs) in the aerospace industry. Skilled in the integration of mechanical and electrical systems for the development of electric vehicles and their electronic speed control. Proficient in 3D modeling for manufacturing purposes, product design, and has extensive knowledge in the creation and interpretation of mechanical drawings. Experienced in FEA analysis, competent in Autodesk CAD, CAE, and CAM software, and well-versed in fluid mechanics and heat transfer analysis. Additionally, skilled in the use of Microsoft Office productivity tools.

I am a Robotics Engineer with a focus on Fusion 360 for 3D modeling, design, and prototyping. I specialize in creating precise and functional models for robotic systems, automation, and mechanical com... Read more

I am a Robotics Engineer with a focus on Fusion 360 for 3D modeling, design, and prototyping. I specialize in creating precise and functional models for robotic systems, automation, and mechanical components. From designing custom robotic parts and assemblies to optimizing designs for 3D printing, I provide innovative and practical CAD solutions. Let's work together to bring your robotics and automation projects to life with high-quality, efficient designs.

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flash... Read more

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flashlight enclosure. I have also designed in sculptress but you probably don't want to hire me for that. If you want to 3D print what I designed (or others) just go to my website. I am soon going to work on designing a 3D printer and am thinking about a organic car design-and getting it printed full scale. I also have a provisional patent for a self closing watch band.

*Great experience in Solidworks *Experience in industrial maintenance and mechanical design *Experience in 3D printing files fixing *Good Organic mesh modelling skills

*Great experience in Solidworks *Experience in industrial maintenance and mechanical design *Experience in 3D printing files fixing *Good Organic mesh modelling skills

Toy designer proactive to explore and research solutions in a playful and simple way, together with the teamwork and technical foundation to make them reality; outstanding skills for 3D CAD with multi... Read more

Toy designer proactive to explore and research solutions in a playful and simple way, together with the teamwork and technical foundation to make them reality; outstanding skills for 3D CAD with multiple tool including rendering. I am a Product Designer and Design Engineer with over 12 years of experience designing, engineering, prototyping, testing and manufacturing physical products, from early concept to marketing and global distribution. My background combines industrial design, mechanical and electronic engineering, coding, and hardware entrepreneurship. I have worked extensively with inflatables, consumer electronics, toys, robotics, printed circuit boards, plastic injection and 3D printing, collaborating directly with manufacturers and brands in China and managing global supply chains across Europe and the USA, bringing products to market cost-effectively at scale. Over several years, I developed the product open source ecosystem, software and apps, educational content, built an international maker community, secured EU grant funding, established strategic partnerships (including HP and Prusa Research), and scaled e-commerce operations internationally. Ultimately I sold the company to Moravia Consulting / Education. Today, I bring this hands-on experience and strategy to teams building real, manufacturable products. I thrive at the intersection of creativity, engineering rigor, and execution. 📍 Based in Europe, Czech Republic

I’m a Mechanical Engineering student at Newcastle University with hands-on experience in CAD design and 3D printing. I regularly design, optimise, and manufacture parts as part of my degree and person... Read more

I’m a Mechanical Engineering student at Newcastle University with hands-on experience in CAD design and 3D printing. I regularly design, optimise, and manufacture parts as part of my degree and personal projects, giving me a strong understanding of design-for-manufacture and real-world tolerances. I work confidently with AutoCAD, Adobe Photoshop, and 3D modelling tools such as Tinkercad, producing clean, print-ready files (STL and similar formats). I can optimise designs for 3D printing by adjusting dimensions, wall thickness, detail depth, and tolerances to ensure reliable, high-quality results. I’m detail-oriented, communicative, and happy to iterate on designs to get the best outcome. Whether you need custom stamps, logos, or functional parts prepared for printing, I can deliver practical, well-prepared designs ready to go.

- Engineering focused 3d modeler - Multiple 3d modeling classes taken - Currently taking 3d modeling college classes

- Engineering focused 3d modeler - Multiple 3d modeling classes taken - Currently taking 3d modeling college classes

I'm an industrial design major from a well recognized and reputed faculty. I offer my services as a 3D modeling designer using well recognized and tested technologies and software, ranging from: Catia... Read more

I'm an industrial design major from a well recognized and reputed faculty. I offer my services as a 3D modeling designer using well recognized and tested technologies and software, ranging from: Catia, SolidWorks, AutoCad, SolidEdge, TinkerCad...

Hello, My name is Doug and I have been working as a freelancer and growing my skills in CAD for 5 years. I have created hundreds of designs for 3D printing and prototyping, both for clients (which I... Read more

Hello, My name is Doug and I have been working as a freelancer and growing my skills in CAD for 5 years. I have created hundreds of designs for 3D printing and prototyping, both for clients (which I am unable to share) and for personal use. I have a focus on mechanical design opposed to more organic shapes, but I am able to complete both forms of projects.