Hire the best freelance Siemens NX (Unigraphics) expert designers for your company

I like the part of product design where things are still slightly messy. The sketch is rough. The measurements are incomplete. The idea works in theory, but no one has yet turned it into a model that... Read more

I like the part of product design where things are still slightly messy. The sketch is rough. The measurements are incomplete. The idea works in theory, but no one has yet turned it into a model that can be reviewed, tested, revised or manufactured. That is usually where I do my best work. I focus on 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘀𝗶𝗴𝗻, 𝟯𝗗 𝗖𝗔𝗗 𝗠𝗼𝗱𝗲𝗹𝗶𝗻𝗴, 𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻, 𝗗𝗙𝗠 𝗮𝗻𝗱 𝗣𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗶𝗻𝗴 helping turn early-stage concepts into clear, functional and production-conscious designs. I do not approach CAD as a drawing exercise. I approach it as problem-solving. That means asking the questions that matter before the model gets too far: Will these parts actually fit? Is this feature necessary? Can the geometry be simplified? Will this create trouble during fabrication? Is the model easy to revise? Does the design still make sense once tolerances, materials, assembly and manufacturing are considered? 𝗠𝘆 𝘄𝗼𝗿𝗸 𝘁𝘆𝗽𝗶𝗰𝗮𝗹𝗹𝘆 𝗰𝗼𝘃𝗲𝗿𝘀:   • 𝟯𝗗 𝗖𝗔𝗗 𝗠𝗼𝗱𝗲𝗹𝗶𝗻𝗴   • 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘀𝗶𝗴𝗻 & 𝗗𝗲𝘃𝗲𝗹𝗼𝗽𝗺𝗲𝗻𝘁   • 𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻   • 𝗗𝗲𝘀𝗶𝗴𝗻 𝗳𝗼𝗿 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴 (𝗗𝗙𝗠)   • 𝗣𝗮𝗿𝗮𝗺𝗲𝘁𝗿𝗶𝗰 𝗠𝗼𝗱𝗲𝗹𝗶𝗻𝗴   • 𝗔𝘀𝘀𝗲𝗺𝗯𝗹𝘆 𝗗𝗲𝘀𝗶𝗴𝗻   • 𝗣𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗲 𝗗𝗲𝘃𝗲𝗹𝗼𝗽𝗺𝗲𝗻𝘁   • 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 & 𝗠𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗶𝗻𝗴 𝗗𝗿𝗮𝘄𝗶𝗻𝗴𝘀   • 𝟮𝗗 𝗗𝗿𝗮𝗳𝘁𝗶𝗻𝗴   • 𝗦𝗵𝗲𝗲𝘁 𝗠𝗲𝘁𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻   • 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗘𝗻𝗰𝗹𝗼𝘀𝘂𝗿𝗲𝘀 & 𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁𝘀   • 𝟯𝗗 𝗣𝗿𝗶𝗻𝘁𝗶𝗻𝗴 / 𝗦𝗧𝗟 𝗣𝗿𝗲𝗽𝗮𝗿𝗮𝘁𝗶𝗼𝗻   • 𝗥𝗲𝘃𝗲𝗿𝘀𝗲 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴   • 𝗖𝗔𝗗 𝗥𝗲𝗱𝗲𝘀𝗶𝗴𝗻 & 𝗢𝗽𝘁𝗶𝗺𝗶𝘇𝗮𝘁𝗶𝗼𝗻   • 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗩𝗶𝘀𝘂𝗮𝗹𝗶𝘇𝗮𝘁𝗶𝗼𝗻 You do not need to come to me with a perfect brief. I can work from 𝗿𝗼𝘂𝗴𝗵 𝘀𝗸𝗲𝘁𝗰𝗵𝗲𝘀, 𝗺𝗲𝗮𝘀𝘂𝗿𝗲𝗺𝗲𝗻𝘁𝘀, 𝗽𝗵𝗼𝘁𝗼𝗴𝗿𝗮𝗽𝗵𝘀, 𝗣𝗗𝗙𝘀, 𝗿𝗲𝗳𝗲𝗿𝗲𝗻𝗰𝗲 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝘀, 𝘁𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗱𝗿𝗮𝘄𝗶𝗻𝗴𝘀, 𝘄𝗿𝗶𝘁𝘁𝗲𝗻 𝗻𝗼𝘁𝗲𝘀, 𝗲𝘅𝗶𝘀𝘁𝗶𝗻𝗴 𝗖𝗔𝗗 𝗳𝗶𝗹𝗲𝘀 𝗼𝗿 𝗲𝗮𝗿𝗹𝘆-𝘀𝘁𝗮𝗴𝗲 𝗰𝗼𝗻𝗰𝗲𝗽𝘁𝘀. The goal is not to produce the most complicated model possible. The goal is to produce the right model: accurate enough to trust, practical enough to use, and structured well enough for the next stage of development. If your concept is still taking shape, send it over. We can figure out the design before the design becomes the problem.

end-to-product development, from concept through high-volume manufacturing. Proven record supporting major OEMs including GILLIG, Monarch Tractor, and Ford. Expert-level proficiency in Siemens NX, CAT... Read more

end-to-product development, from concept through high-volume manufacturing. Proven record supporting major OEMs including GILLIG, Monarch Tractor, and Ford. Expert-level proficiency in Siemens NX, CATIA V5/V6, SolidWorks, and SimSolid for rapid structural validation. Strong background in BIW, sheet metal, chassis systems, plastic trim. Extensive experience collaborating with US-based cross-functional teams in remote environments. CREA registered. English: Full Professional Proficiency. US Visa: B1/B2.

EV and Thermal Systems Engineer with an M.Tech in Electric Vehicle Technology from Indian Institute of Technology Indore and experience in automotive HVAC system design, thermal simulation, RFQ handli... Read more

EV and Thermal Systems Engineer with an M.Tech in Electric Vehicle Technology from Indian Institute of Technology Indore and experience in automotive HVAC system design, thermal simulation, RFQ handling, and validation. Skilled in vehicle thermal management, BTMS, EV powertrain simulation, refrigeration cycle analysis, and system integration using MATLAB/Simulink, KULI, and ANSYS.

I am a mechanical design engineer specializing in 3D modeling, robotics, and CAD workflow automation. With hands-on industry experience in the PLM department at Siemens and an educational foundation f... Read more

I am a mechanical design engineer specializing in 3D modeling, robotics, and CAD workflow automation. With hands-on industry experience in the PLM department at Siemens and an educational foundation from NED University, I deliver precise, manufacturing-ready models for my clients. What I bring to your project: Expert CAD Modeling: Deep expertise in Siemens NX and SolidWorks for industrial design, complex assemblies, and mechanical routing. Mechatronics Expertise: Proven experience designing robotic systems, including 6-DOF arms, SCARA robots, and custom drivetrains. Engineering Automation: The ability to write custom Python scripts and build tools that automate repetitive CAD/CAM tasks, saving clients both time and money. Real-World Experience: A track record of developing functional automated tools (like custom Overview Matrices) and integrating hardware for drones and robotic mechanisms.

I,M A DESIGN ENGINEER LOOKING FOR FREELANCING WORK I,M PERFECT IN INDUSTRAL,HOUSE HOLD,AUTOMOTIVE,TOYSAND ASSEMBLIES

I,M A DESIGN ENGINEER LOOKING FOR FREELANCING WORK I,M PERFECT IN INDUSTRAL,HOUSE HOLD,AUTOMOTIVE,TOYSAND ASSEMBLIES

As a Mechanical Design Engineer, I specialize in CAD design, product development, prototyping, engineering simulation, and data analysis. I’ve been playing a part in designing mechanical components fo... Read more

As a Mechanical Design Engineer, I specialize in CAD design, product development, prototyping, engineering simulation, and data analysis. I’ve been playing a part in designing mechanical components for various products, ensuring functionality and manufacturability. My dedication to sustainable design and innovation drives my commitment to excellence in mechanical engineering.

*** I am a Mechanical Engineer with over 11 years of experience in product design and CAD/CAM/CAE. My expertise spans across 3D MODELLING and rendering, SOLIDWORKS, CATIA, NX CAD, and Machine Design.... Read more

*** I am a Mechanical Engineer with over 11 years of experience in product design and CAD/CAM/CAE. My expertise spans across 3D MODELLING and rendering, SOLIDWORKS, CATIA, NX CAD, and Machine Design. I specialize in product design and designing for 3D printing, ensuring high-quality and precise results. *** Though I am new to this website and currently have no reviews, I am confident that my skills and work ethic will quickly establish me as one of the most preferred freelancers. Client satisfaction is my highest priority, and I am committed to providing top-notch quality work at the lowest cost in the shortest possible time. I never accept or promise anything I cannot deliver, ensuring reliability and trustworthiness in all my projects. *** A key advantage of working with me is the support I offer even after project completion. If you have urgent needs, you can count on me to be there for you at any time. My work is ethical and genuine, with no time limitations, ensuring that I am always at your service. *** With utmost respect to all my clients, I am dedicated to delivering exceptional CAD design and product design services. Please feel free to reach out to discuss your project requirements in detail. I look forward to collaborating with you and bringing your vision to life. *** Always at your service and forever. With utmost respect to all my clients!

I am a Mechanical Design Engineer with 8+ years of experience in product design, CAD modelling, and manufacturing integration across valves, actuators, industrial automation, autonomous electric vehic... Read more

I am a Mechanical Design Engineer with 8+ years of experience in product design, CAD modelling, and manufacturing integration across valves, actuators, industrial automation, autonomous electric vehicles, and structural equipment. My strength is taking engineering requirements and concepts through design development toward manufacturable solutions. My experience includes 3D CAD modelling, engineering drawings, GD&T, DFMA, tolerance stack-up, BOM development, structural design, prototype development, and manufacturing support. Recent work includes delivering the complete structural design package for a 2-Ton SWL Portable Gantry Crane, including structural calculations based on IS 800:2007, CAD modelling, fabrication drawings, BOM, and FEA-based design validation. I work with SolidWorks, CATIA V5, NX, and AutoCAD and bring practical experience working with fabrication and manufacturing processes. I am interested in helping clients develop practical, well-engineered, and manufacturable mechanical products and solutions.

Highly motivated Mechanical Engineering graduate from KNUST with foundational training in 3D modeling and 2D drafting. Eager to leverage technical skills in SolidWorks, Siemens NX, and AutoCAD to deli... Read more

Highly motivated Mechanical Engineering graduate from KNUST with foundational training in 3D modeling and 2D drafting. Eager to leverage technical skills in SolidWorks, Siemens NX, and AutoCAD to deliver precise mechanical designs. Detail-oriented and passionate about translating engineering concepts into practical, production-ready solutions.

I am a Mechanical Design Engineer with 8+ years of industry experience in mechanical design, 3D modeling, 2D manufacturing drawings, tool design, fixture design, SPM, and automation projects. I have... Read more

I am a Mechanical Design Engineer with 8+ years of industry experience in mechanical design, 3D modeling, 2D manufacturing drawings, tool design, fixture design, SPM, and automation projects. I have worked on engineering design and manufacturing drawing projects for clients including Rane and Simson, handling customer/reference drawings, 3D modeling, detailed 2D manufacturing drawings, assemblies, machining details, and design corrections. My Core Expertise: 2D Manufacturing & Production Drawings 3D Part & Assembly Modeling Tool & Fixture Design SPM & Automation Machine Design Jigs, Fixtures & Gauges Machining & Fabrication Drawings Sheet Metal Design Welded Structure Design Assembly Drawings & BOM Drawing Corrections & Standardization PDF / Existing Drawing to CAD Conversion Reverse Engineering from Existing Drawings Manufacturing-ready drawings with dimensions, tolerances, sections, and notes

Hello there! I'm a design engineer with extensive experience in 3D Modelling, Reverse engineering and Product Design/Visualisation. I use AUTOCAD, SOLIDWORKS, BLENDER, KEYSHOT, CREO, NX, DESIGN X. I s... Read more

Hello there! I'm a design engineer with extensive experience in 3D Modelling, Reverse engineering and Product Design/Visualisation. I use AUTOCAD, SOLIDWORKS, BLENDER, KEYSHOT, CREO, NX, DESIGN X. I specialize in: * 3D modelling for 3D printing * Industrial Design & prototyping * Product Design & visualization * 2D drafting/Technical drawing My goal is to deliver accurate, high-quality designs that meet your exact requirements, whether you're looking for prototypes, manufacturing-ready files, or conceptual design. Feel free to contact me with any questions or to discuss your requirements.

www,celalettintoprak,com I design real products that get manufactured - not just 3D models. Manufacturing-ready CAD, prototyping, and Design for Manufacturing (DFM)-driven product development for ind... Read more

www,celalettintoprak,com I design real products that get manufactured - not just 3D models. Manufacturing-ready CAD, prototyping, and Design for Manufacturing (DFM)-driven product development for industrial and consumer products. I’m an Engineer and Industrial Product Designer focused on manufacturing-driven product development. My background spans automotive, industrial, and consumer products, where I’ve worked as a Product Developer, Designer, and Technical Lead in production-oriented environments. I don’t approach projects as isolated design tasks. I approach them as systems that must survive prototyping, manufacturing, assembly, cost pressure, and real-world use. 📐 What You Can Expect Working With Me: - Clear, structured CAD suitable for iteration and production - Design decisions informed by manufacturing reality - Practical communication with engineers, suppliers, and manufacturers - Honest feasibility feedback (go / no-go when needed) - Designs meant to be tested, not just rendered 📐 Core Capabilities: - 3D CAD modeling (Siemens NX) - 2D technical drawings (AutoCAD Professional) - CNC, laser cutting, and sheet metal preparation - Injection molding–ready part design - Fixture, bracket, and assembly design - BOM creation and production planning support - Reverse engineering and scan-based modeling 📐 Injection Mold & Manufacturing Experience I have hands-on experience designing plastic injection molds and mold-ready parts, including projects for automotive and food-related products. ⚙️ I’m familiar with: - Injection molding–ready design, Core / cavity logic - Draft angles & wall thickness optimization - Parting lines and shut-off surfaces - Shrinkage and material behavior - Gate concepts (hot runner, valve gate) - Collaboration with mold makers and CNC shops - Design for Assembly (DFA), production validation - Engineering-driven product development - Long-term product roadmap support My focus is always on tool longevity, cycle time, surface quality, and cost efficiency. 📏 Typical Projects I Work On: - Automotive accessories and aftermarket products - Mechanically complex plastic or metal parts - Prototyping-heavy product development - Production validation before tooling - Redesigns for cost reduction or manufacturability - CAD clean-up and production conversion 📌 Primary CAD Tool: Siemens NX, AutoCAD and Geomagic Design X I work primarily in Siemens NX, which is widely used in high-end automotive and industrial manufacturing. I can deliver clean, fully editable STEP / STL / Parasolid files, and I regularly convert and work with SolidWorks, Fusion 360, Rhino, SketchUp, and scan-based data. If you use SolidWorks or another CAD system, this is not a limitation — deliverables are always production-ready and compatible. 📌 If you need more than a modeler—someone who understands how products are actually built and scaled—I can support your project from concept to production readiness.

I have a strong connection between knowledge, experience, and creativity. I pay close attention to detail and strive to create not only functional but also aesthetically pleasing products and devices.... Read more

I have a strong connection between knowledge, experience, and creativity. I pay close attention to detail and strive to create not only functional but also aesthetically pleasing products and devices. With extensive experience in large-scale projects, I know how to lead and manage tasks effectively, integrate multidisciplinary solutions, and deliver exactly what is required. Key Skills and Experience: 🔹 CAD Systems: Catia V5/V6, SolidWorks, Creo (Pro/E), Siemens NX, AutoCAD (Mechanical, Architecture), Autodesk Inventor/Fusion, Mechanical Desktop, Chief Architect, Revit, SketchUp, 3DVIA Composer, DraftSight 🔹 CAM: Delcam, Siemens NX NC, CATIA NC Modules, Sinumerik 840D 🔹 CAE & Simulation: Moldflow, ANSYS (including CFX), Abaqus, LS-Dyna, COMSOL, AutoForm, MAGMA5, SUTCAST, Simulia, Adina, Nastran, Patran, EasyBlank, Femap 🔹 Mining & Geology: Noddy, Strater, RockWorks, GeoStudio, Surpac, Surfer, Paraview Geo, Geovia 🔹 GIS: QGIS, ArcGIS, MapInfo Professional 🔹 Project Management & PLM: SAP Enovia, Siemens Teamcenter 🔹 BIM: Digital Project 🔹 Rendering & Visualization: PhotoView360, Lumion, Showcase, KeyShot, Artlantis Studio 🔹 Programming Languages: Fortran, Visual Basic, Scheme 🔹 LIDAR, Geodesy, GIS Expertise 🔹 Software & Communication Tools: MS Office, OpenOffice, Adobe Photoshop, Lightroom, Dreamweaver, Thunderbird, MS Access 🔹 Optics & Simulation: Zemax, TracePro, OSLO, CODE V, ASAP Additional Expertise: Geometric Dimensioning & Tolerancing (ANSI Y14.5M/ASME Y14.5, ISO standards) BOM creation and management CFD, Heat Transfer, FEM, Sheet Metal Forming, Collision & Impact Analysis Rapid Prototyping, SQL Queries Strong social and technical skills Analytical thinker with strong decision-making abilities Ambitious, communicative, and adaptable to diverse work environments I am highly motivated to grow professionally and eager to take on new challenges.

Mechanical Engineering undergraduate with a strong interest in CAD, CAE, and product design. Proficient in Siemens NX for parametric 3D modeling, with experience in Fusion 360 for mechanical design.... Read more

Mechanical Engineering undergraduate with a strong interest in CAD, CAE, and product design. Proficient in Siemens NX for parametric 3D modeling, with experience in Fusion 360 for mechanical design. Skilled in ANSYS for CAE, including structural, fluid flow, and engineering simulations. Passionate about developing manufacturable mechanical components, applying Design for Manufacturing (DFM) principles, and continuously improving my engineering and problem-solving skills through real-world projects.

I currently work at a foreign trade company, where I am responsible for product design and modeling. My role covers the entire process—from sketching and 3D modeling to generating PDF drawings and coo... Read more

I currently work at a foreign trade company, where I am responsible for product design and modeling. My role covers the entire process—from sketching and 3D modeling to generating PDF drawings and coordinating with the factory for prototyping—and I have three years of professional experience. Since I began my career, several products I have worked on—specifically cast-iron pots and bread ovens—have been listed on Amazon under the brand names "vorringard" and "edging casting." I was responsible for the 3D modeling of these products.

I'm Muhammed, a Top-Rated Electromechanical & Product Design Engineer with 100% Job Success across 52+ completed projects on ▒▒▒▒▒▒. I specialize in taking consumer electronics and complex hardware pr... Read more

I'm Muhammed, a Top-Rated Electromechanical & Product Design Engineer with 100% Job Success across 52+ completed projects on ▒▒▒▒▒▒. I specialize in taking consumer electronics and complex hardware products from concept to fully manufacturable reality. Core Services: Mechanical & Industrial Design — Advanced CAD modeling, organic surface design, and physics-driven enclosure engineering using Siemens NX, SolidWorks, and Fusion 360. Mostly focused on design of consumer products and design for manufacturing. Electronics & PCB Design — Schematic capture and PCB layout using KiCad and EasyEDA; production-ready Gerbers, BOMs, and component sourcing for rapid prototyping. CFD & FEA Simulation — Fluid dynamics, thermal distribution, and structural analysis using Ansys Fluent and Siemens Nastran to validate designs before physical prototyping. Design for Manufacturing (DFM) — Injection-molding ready parts, snap-fits, CNC fixtures, casting molds, and assemblies optimized for mass production. Prototyping & Reverse Engineering — 3D scanning, STL-to-STEP conversion, additive manufacturing, and iterative electromechanical validation. As a PhD candidate in CFD at KAUST and former thermo-fluids researcher at Istanbul Technical University, I combine deep physics understanding with real factory-floor manufacturing knowledge. I bridge the gap between custom PCB electronics and physical enclosures — ensuring perfect integration of components, battery fitment, and mechanical sealing. Software: Siemens NX · SolidWorks · Autodesk Fusion 360 · SpaceClaim · KiCad · EasyEDA · Ansys Fluent · Siemens Nastran · Blender Let's bring your hardware product to life — from rough sketch to ready-to-manufacture files.

I am a Mechanical/Aerospace Design Engineer specialising in CAD modelling, CFD simulation, FEA analysis, and UAV propulsion systems. I design, analyse, and optimise mechanical and aerodynamic componen... Read more

I am a Mechanical/Aerospace Design Engineer specialising in CAD modelling, CFD simulation, FEA analysis, and UAV propulsion systems. I design, analyse, and optimise mechanical and aerodynamic components using industry‑standard tools such as Creo, SolidWorks, ANSYS Fluent, and ANSYS Mechanical. My core expertise includes: 1)3D CAD modelling & mechanical design 2)CFD simulations (ducted propellers, internal flow, external aerodynamics) 3)FEA structural & thermal analysis 4)UAV propulsion system design 5)Parametric modelling & optimisation I deliver complete engineering solutions including geometry creation, mesh generation, simulation setup, post‑processing, and detailed technical reports. If you need high‑quality CAD models, aerodynamic analysis, or mechanical simulations, I can support your project from concept to validated results.

I am a Mechanical Design Engineer with a Bachelor's degree in Mechanical Engineering and professional CAD experience. I specialize in creating accurate 3D models, assemblies, and 2D manufacturing draw... Read more

I am a Mechanical Design Engineer with a Bachelor's degree in Mechanical Engineering and professional CAD experience. I specialize in creating accurate 3D models, assemblies, and 2D manufacturing drawings using SolidWorks. My skills include: * 3D Part Modeling * Assembly Design * 2D Manufacturing Drawings * Sheet Metal Design * Engineering Drawings * Bill of Materials (BOM) * Design for Manufacturing (DFM) * AutoCAD Drafting I have professional experience preparing engineering drawings and CAD documentation while working on residential solar projects. I am now focused on providing mechanical design services using SolidWorks for product design, machine components, sheet metal parts, and 3D printable models. I am committed to delivering accurate, well-organized, and manufacturable designs while maintaining clear communication and meeting project deadlines. I continuously improve my CAD skills to provide high-quality solutions for every client. I look forward to helping bring your ideas from concept to production.

I am a Mechanical Design Engineer and Industrial Designer with nearly a decade of experience in bridging the gap between aesthetic product design and rigorous structural engineering. My expertise lies... Read more

I am a Mechanical Design Engineer and Industrial Designer with nearly a decade of experience in bridging the gap between aesthetic product design and rigorous structural engineering. My expertise lies in the full development cycle—from initial concept and 3D modeling to advanced Finite Element Analysis (FEA) and international certification (EN, ADR, TSE standards). I specialize in the design of pressure vessels, mobile tankers, and complex industrial equipment. My workflow ensures that every design is not only visually optimized but also structurally sound and compliant with global manufacturing standards. Whether it is a high-precision consumer product or heavy-duty industrial machinery, I focus on durability, safety, and production efficiency.

I am a Mechanical Engineer with over 19 years of extensive experience in 3D modelling, 2D manufacturing drawing preparation, paper-to-CAD conversion, new product design and development, and reverse en... Read more

I am a Mechanical Engineer with over 19 years of extensive experience in 3D modelling, 2D manufacturing drawing preparation, paper-to-CAD conversion, new product design and development, and reverse engineering. I possess advanced expertise in SolidWorks, Autodesk Inventor, Siemens NX (UG NX), and AutoCAD, delivering precise, production-ready engineering solutions. I am known for my strong English communication skills, positive professional attitude, and unwavering focus on customer satisfaction, consistently ensuring high-quality outcomes and long-term client trust

Mechanical engineer with 15+ years of hands-on experience in structural design, composite manufacturing, and product development across motorsport, agricultural machinery, and food equipment industrie... Read more

Mechanical engineer with 15+ years of hands-on experience in structural design, composite manufacturing, and product development across motorsport, agricultural machinery, and food equipment industries. Software: CATIA V5, Siemens NX, SolidWorks, Solid Edge — 3D modelling, surface design, assembly management, and 2D technical drawings for manufacturing and commercial documentation. Industry experience: - Motorsport / Composites: Structural carbon fibre components for Formula 1 and LMP1 programs (Audi Sport). From design to manufacturing, working to aerospace-grade standards. - Agricultural machinery: Program manager on full tractor development from concept to series homologation (BCS Group). Multi-disciplinary coordination across mechanical, hydraulic, and electronic systems. - Food equipment: Complete product development of Brino — a professional cold brew coffee dispenser — from prototype to CE and MOCA-certified product, launched at HOST Milano 2025. What I offer: - 3D modelling and surface design (parts and assemblies) - Manufacturing and commercial technical drawings - Design for Manufacturing (DFM) and Design for Assembly (DFA) - Product development support from concept to production-ready - CE machinery documentation support Available for project-based work and ongoing collaboration. Fluent in English and Italian.

I work with precision plastic injection molding manufacturers in India, helping Western and European companies navigate tooling development, DFM reviews, and on-ground manufacturing sourcing. • I audi... Read more

I work with precision plastic injection molding manufacturers in India, helping Western and European companies navigate tooling development, DFM reviews, and on-ground manufacturing sourcing. • I audit suppliers and validate toolmakers before you commit to a mold build • I review part designs for moldability and flag DFM issues before they become expensive problems • I manage the full project lifecycle from tool sampling through production ramp-up • Most of my clients are automotive and EV component suppliers diversifying out of China, or product companies moving manufacturing overseas for the first time • I'm straightforward about what's realistic on cost, timelines, and quality so you make decisions with actual data, not factory tour impressions • I handle everything from independent consulting to on-ground project management and supplier coordination

Mechanical and aerospace engineer with hands-on industry experience at Airbus (via Accenture), ISRO-LEOS, and Avascent-aero (CRJ program), specialising in structural CAD, GD&T, and FEA/CFD simulation.... Read more

Mechanical and aerospace engineer with hands-on industry experience at Airbus (via Accenture), ISRO-LEOS, and Avascent-aero (CRJ program), specialising in structural CAD, GD&T, and FEA/CFD simulation. I bring professional-grade rigour to every deliverable — from toleranced engineering drawings to validated structural models. What I offer: Structural & assembly CAD in CATIA V5, 3D Experience, SolidWorks, Siemens NX, and Fusion 360 GD&T and tolerance stack-up (ANSI/ASME Y14.5) — 1D, 2D, and 3D analysis FEA with ANSYS Mechanical and HyperMesh; CFD with ANSYS Fluent Aerospace-grade documentation: engineering drawings, BOM, SRM compliance Topology optimisation and generative design for lightweight structures Track record: Multiple national rankings in SAE India competitions (AIR 1 — ADC 2022; AIR 2 — ADDC 2023 & 2024), a published research paper on UAV structural optimisation, and a precision pneumatic test system delivered for ISRO's space mirror programme. I've handled real Airbus design datasets and airworthiness documentation in a professional setting. I take on projects requiring accuracy, proper documentation, and aerospace or industrial-grade standards. Fast turnaround, responsive communication, and clean deliverables every time.

Mechanical CAD Engineer | SolidWorks | AutoCAD | Fusion 360 | Creo | Inventor | 3D Modeling | Product Design | Reverse Engineering | Manufacturing Drawings A CAD model is only useful when it solves t... Read more

Mechanical CAD Engineer | SolidWorks | AutoCAD | Fusion 360 | Creo | Inventor | 3D Modeling | Product Design | Reverse Engineering | Manufacturing Drawings A CAD model is only useful when it solves the problem behind it. That means the dimensions need to make sense, parts need to fit together, assemblies need to work as intended, and the final files need to be usable by the person manufacturing the product. That is the approach I bring to mechanical CAD and product design. I work with startups, inventors, manufacturers, engineers, and product teams to develop mechanical components and products from the earliest concept through detailed manufacturing documentation. You can start with a hand sketch, photo, PDF, existing part, rough idea, or incomplete CAD file. I can turn that information into a structured and editable design while considering how the product will actually be made. My work includes 3D CAD modeling, mechanical design, assemblies, 2D drawings, reverse engineering, sheet metal, product development, manufacturing drawings, DFM, BOMs, and technical documentation. I can also prepare files for CNC machining, laser cutting, injection molding, fabrication, and 3D printing. Areas I Work In • Mechanical CAD Design • 3D Product Modeling • 2D Engineering Drawings • Machine & Mechanical Parts • Product Design & Development • Reverse Engineering • Assembly & Exploded Views • Sheet Metal Design • Parametric Modeling • Surface & Solid Modeling • Manufacturing Drawings • Design for Manufacturing (DFM) • Bill of Materials (BOM) • Prototype Development • CAD File Conversion • PDF / Image / Sketch to CAD • CNC Manufacturing Documentation • 3D Printing Files • STL, STEP, IGES, DWG & DXF • Product Rendering & Visualization CAD Software SolidWorks | AutoCAD | Fusion 360 | PTC Creo | Autodesk Inventor | CATIA | Siemens NX | Blender | KeyShot I also pay attention to the details that are easy to overlook during modeling—dimensions, tolerances, interfaces, fit, assembly relationships, manufacturability, and how the final design will be interpreted on the production floor. For reverse engineering projects, I can work from existing physical parts, reference images, measurements, or available documentation and rebuild them as usable CAD models and manufacturing drawings. For new products, I can help develop the design from concept through a more refined, production-ready stage rather than simply creating a model that looks correct on screen. The goal is simple: give you CAD files that are organized, accurate, editable, and useful for the next step of your project. If you already have a sketch, reference, existing part, or incomplete model, send it over. I can assess what is needed and help turn it into a workable mechanical design.

Mechanical design engineer with over 12 years of experience in leading technical development projects. Siemens NX expert for designing moulds and product Advanced additive manufacturing and convention... Read more

Mechanical design engineer with over 12 years of experience in leading technical development projects. Siemens NX expert for designing moulds and product Advanced additive manufacturing and conventions manufacturing skills and industry experience.

I help clients develop innovative, manufacturable, and cost-effective products from concept to production. Experienced in 3D CAD modeling, assemblies, engineering drawings, tolerance stack-up, DFMEA,... Read more

I help clients develop innovative, manufacturable, and cost-effective products from concept to production. Experienced in 3D CAD modeling, assemblies, engineering drawings, tolerance stack-up, DFMEA, BOM management, and product validation across appliance, automotive, and heavy equipment industries.

Project Leader for plastic parts development in Siemens NX: ● 4 years for Cable channels for automotive harnesses @Kromberg & Schubert Romania ● 3 years for Connection systems in automotive @Aptiv Ge... Read more

Project Leader for plastic parts development in Siemens NX: ● 4 years for Cable channels for automotive harnesses @Kromberg & Schubert Romania ● 3 years for Connection systems in automotive @Aptiv Germany ● 7 years experience as Mechanical Development Engineer @Siemens Germany ● Graduated as M.Sc. (=Dipl. -Ing.) in Mechanical Engineering @Technical Universitiy Darmstadt.