Hire the best freelance Scilab expert designers for your company

Passion for design, brainstorming and finding solutions.

Passion for design, brainstorming and finding solutions.

Hi! I am a Mechatronics Engineer with 4 years of experience in Engineering, Robotics, MATLAB, SolidWorks, Ansys and PLC programming. I am proficient and skillful MATLAB programmer. I am more than happ... Read more

Hi! I am a Mechatronics Engineer with 4 years of experience in Engineering, Robotics, MATLAB, SolidWorks, Ansys and PLC programming. I am proficient and skillful MATLAB programmer. I am more than happy to share my experience in bringing your project to destination. It is the right place for you to get the solution of your problems regarding software's. You will be entertained here with high quality of work. Best Regards!

I am a Mechanical Engineer and learning Finite Element Analysis. I am pursuing Bachelor’s degree in Mechanical Engineering from the Indian Institute of Information Technology Design and Manufacturing... Read more

I am a Mechanical Engineer and learning Finite Element Analysis. I am pursuing Bachelor’s degree in Mechanical Engineering from the Indian Institute of Information Technology Design and Manufacturing Jabalpur, and possess a keen research interest in Computational Fluid Dynamics. My areas of expertise include: • Electric Vehicle Power Train • Thermal Management System • Motors, Drive Unit, and Batteries • Computational Fluid Dynamics (CFD) & Numerical Methods • Water Heaters & HVAC Systems My technical skills include: • Multi-physics Engineering Software: Scilab-Xcos, Simulink • Programming Tools: C, C++, MATLAB, Python • Flow Analysis Software: OpenFOAM, ANSYS Fluent, Altair, • Structural Analysis & Design Tools: ANSYS Mechanical APDL, ANSYS Workbench Suite, Autodesk Fusion 360

Advanced electronics engineering and PCB design professional from Argentina

Advanced electronics engineering and PCB design professional from Argentina

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and contr... Read more

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and control theory to make superb applications and products. The name of the game is successful integration between different domains, which is a missing skill searched by many engineers, and needed by many Start-ups. I am new here, but I have finished more than 60 freelancing tasks and missions in other sites. I have used PIC microcontroller and Arduino to implement so many projects, and I have even used them to make commercial products. I have the talent of integrating embedded systems with electronics and GUI interface to make a complete application. I used microcontrollers in applications like: Sensors Interfacing (GPS-Motion-Encoder-Light-Temperature-Level-Pressure-Vibration-Position) - CNC machine control - Proportional and on/off temperature controllers - Level controller - Power metering IC interfacing (Experience with ADE7953) - Wifi & IoT - GSM - SD card interfacing. Moreover, I have experinece in making integrated system between Raspberry pi and Arduino for applications that need so. Moreover, I have made many projects that involve signal electronics, power electronics, sensors and measuring systems, and signal conditioning. In addition, I and my team can give you support if you want a PCB design and soldering for your circuit. Regarding control and automation, I am finished master study in automatic control theory, and I have experience in designing embedded controllers - automatic control theory and applications - adaptive control - autotuners - system modeling & simulation- system Identification and parameters estimation - system dynamic response analysis - pole placement controllers - PID controllers - Scilab & Matlab software packages . In addition, I can give you support in PLC systems and ladder diagram programs for controlling industrial processes. In addition, I am using Java as GUI interface for my applications, so I have experience in how to make a java GUI program and to control an embedded system using it. I made several projects where I used Java to monitor sensor values, or to send control commands to electronic circuits. ِAlso I have worked before with Java libraries that serve scientific applications, like EJML matrix algebra library, JArduino (java for arduino) library, JFreeChart plotting library, ImageJ image processing libary, RXTX serial communication library, etc...

I am passionate about marine engineering and small crafts and I constantly aim to develop my skills in these areas. I have been in the marine industry since 2010 and during this time I have been worki... Read more

I am passionate about marine engineering and small crafts and I constantly aim to develop my skills in these areas. I have been in the marine industry since 2010 and during this time I have been working in many marine sector businesses and graduated in Boat Design (BEng) from KYAMK/Southampton Solent and in Marine Engineering (MSc) from Newcastle University. At the moment I run my own business that specializes in boat and propulsion drive design in Madrid and I have customers all over Europe. I use Solidworks on a daily basis to meet my customers strict design criteria. I am open for new opportunities and ready to tackle some new challenges. But below are few areas that I am very competent in: Solidworks (I have a valid license) ISO12215-5 structural calculations for boats Planing boat resistance calculations and speed estimations Displacement boat resistance calculations and speed estimations Corrosion protection & coating Marine Gear Design JIS & AGMA Blender render & animations Excel Solver

Am very skill and efficient in 100% Solidworks design, 60% in autocad design, 50% in matlab and 100% preparing proposals for projects using Microsoft word packages with a 5 years experience (since 201... Read more

Am very skill and efficient in 100% Solidworks design, 60% in autocad design, 50% in matlab and 100% preparing proposals for projects using Microsoft word packages with a 5 years experience (since 2018)

I have strong background on; CFD FEA Embedded Systems Mechanical Design Rendering Surface Modelling PLC/SCADA Applications Scilab System Simulation and Modelling Naval Architecture and Marine Engineer... Read more

I have strong background on; CFD FEA Embedded Systems Mechanical Design Rendering Surface Modelling PLC/SCADA Applications Scilab System Simulation and Modelling Naval Architecture and Marine Engineering. You can validate my works and skills with visiting to www.gurengineering.com. I involved advanced engineering projects since 2018.

Hi, I'm Yme Wytse Kuiper... Nice to meet you! I see myself as a cheerful and motivated person. Besides that I can work well independently, but also enjoy working in a team. Furthermore I am a good l... Read more

Hi, I'm Yme Wytse Kuiper... Nice to meet you! I see myself as a cheerful and motivated person. Besides that I can work well independently, but also enjoy working in a team. Furthermore I am a good listener but I am also not afraid to give my opinion. I like to do sports, but my biggest hobby is drawing. Besides drawing, I have a great interest in 3D printing. In 2019 I graduated from the Bachelor program Industrial Product Design at the Hogeschool Rotterdam (University of Applied sciences). In order to deepen my knowledge in the technical field, I started doing the Mechanical Engineering Master Biomechanical Engineering and Robotics at the University of Twente (Msc). Currently, in addition to my work as a freelancer, I am working on completing my master's degree. During my studies I developed an interest in healthcare technology, because as a designer in healthcare technology you can have a direct positive impact on the life of the user and/or patient. I have done several projects in the field of rehabilitation, sports, ergo therapy, healthcare robotics and hospital equipment design. But I am particularly interested in the field of bio-mechanics and prosthetics. In order to develop myself even further, I am doing a master's degree with a specialization in Biomechanics and Robotics. I hope to apply the knowledge I gain in my studies in future projects.

Engineering student at École Centrale de Lyon (CPGE graduate, top 100 nationally), specializing in mechanical design and CAD. Experienced with ANSYS and Fusion 360, with a strong ability to quickly ad... Read more

Engineering student at École Centrale de Lyon (CPGE graduate, top 100 nationally), specializing in mechanical design and CAD. Experienced with ANSYS and Fusion 360, with a strong ability to quickly adapt to new tools and workflows. My personal projects reflect a hands-on engineering mindset: custom fiberglass air intake and high-downforce wing for a racecar (prototyped and track-tested), an automated 3D printer enclosure heating system, and a CNC hot wire foam cutter for large-scale wing profiles. I deliver precise, well-documented designs and pick up new software fast. Whether you need mechanical parts, simulations, or prototyping support — I get the job done efficiently.

I am a meticulous and results oriented mechanical engineer with PhD from the US, currently working as a mechanical design engineer/project manager in product development I am PMI certified Project Ma... Read more

I am a meticulous and results oriented mechanical engineer with PhD from the US, currently working as a mechanical design engineer/project manager in product development I am PMI certified Project Management Professional (PMP) with three years of experience in research and product development. I help companies to develop their product offerings by utilizing my technical, project management and analytical skills. Some of my significant contributions and achievements are: 1. Designed and supervised the fabrication and testing of a scaled glass fibre reinforced polymer composite made wave energy converter demonstrator structure within a constrained budget of €60000, at NUI Galway. 2. Spearheaded a product improvement project to design and develop a hybrid concrete pedestal for wastewater treatment plant mixers, with a projected sales generation of €100k at Sulzer Pumps Ireland. 3. Investigated warranty issues in a household light drainage pump, leading a team of 2 technicians by 3D printing and testing design modifications of the switch causing the problem. 4. Led a team of four to design at Bajaj Steel Industries, develop and test an improved ginned cotton conveying system, saving about 70% in power consumption. Some of my contributions and achievements in research are: 1. Investigated the effect of defects and imperfections in adhesive bonded composites as part of PhD programme funded by L3 Harris at Baylor University, USA. 2. Awarded a grant of €53,727 from Science Foundation Ireland to study moisture behaviour of recycled carbon fibres while working as a post-doc researcher at NUI Galway, Ireland. 3. Published three research articles in reputed peer-reviewed research journals and presented posters and papers at international conferences. Additionally, I am proficient in CAD and CAE analysis software namely: 1. ABAQUS 2. ANSYS 3. SIEMENS NX 4. SOLIDWORKS 5. INVENTOR 6. AUTOCAD. 7. MATLAB, OCTAVE, SCILAB Also some of my other technical skills are: 1. Proposal/Grants/Technical writing 2. New product development 3. Data collection and analysis 4. Biomedical Design 5. GD&T 6. Statistical analysis 7. Computer Aided Design (CAD) 8. Project Management (CAPM, PMP), Agile, Waterfall and Scrum 9. Finite Element Analysis (FEA) 10. Instrumentation (Tensile Testing, Hardness Testing, Strain Gauges, Ultrasonic testing) 11. Risk management

I'm a B-Tech in Mechanical Engineering with over 2 years of professional experience in design an development. I'm a certified CAD designer from Indo-German and can work on a series of design software... Read more

I'm a B-Tech in Mechanical Engineering with over 2 years of professional experience in design an development. I'm a certified CAD designer from Indo-German and can work on a series of design software like CATIA, Uni-graphics, Pro-E, Creo, Autocad, Solidworks, Matlab, scilab.

i am Hamood Naeem. i live in Faisalabad , Pakistan. (Islamabad-temporarily). I am a graduate of National University of Sciences and Technology, Islamabad in Civil Engineering (2012-2016).

i am Hamood Naeem. i live in Faisalabad , Pakistan. (Islamabad-temporarily). I am a graduate of National University of Sciences and Technology, Islamabad in Civil Engineering (2012-2016).

Physics trained and proficient in solid works. 15 years+ laser engineer, sub assembly to final production, to customer on site support.

Physics trained and proficient in solid works. 15 years+ laser engineer, sub assembly to final production, to customer on site support.

With a background in Electronics Engineering from ENSICAEN, I specialize in transforming innovative ideas into functional electronic products. Through my agency, DesignForU, I provide end-to-end suppo... Read more

With a background in Electronics Engineering from ENSICAEN, I specialize in transforming innovative ideas into functional electronic products. Through my agency, DesignForU, I provide end-to-end support for hardware development, focusing on precision, reliability, and manufacturability. My Strengths & Expertise: Sensor Integration & Instrumentation: Expert in data acquisition, signal conditioning, and high-precision measurement systems. Full-Stack Hardware Development: From schematic capture and multi-layer PCB layout to firmware development (C/C++). Rapid Prototyping: Bridging the gap between electronics and mechanical constraints for cohesive product design. IoT & Embedded Systems: Designing smart, connected solutions optimized for low power and performance. Key Accomplishments: Graduated from ENSICAEN with a focus on Sensors and Instrumentation. Successfully launched DesignForU, helping startups and SMEs develop custom electronic solutions. Proven track record in managing the entire product lifecycle: Design, Prototyping, and Validation. I am dedicated to delivering clean, professional designs that meet industry standards. Let’s turn your technical challenges into market-ready products.

Designed a DC electrical furnace controlsystems. Designed several machine components, carried plastic flow simulation and strength tests on various components.

Designed a DC electrical furnace controlsystems. Designed several machine components, carried plastic flow simulation and strength tests on various components.

I have more than 10+ years of experience as a CAD designer, working with software like AutoCAD, Fusion 360, Inventor, and CATIA v5. My services include technical drawings, product design, and 3D model... Read more

I have more than 10+ years of experience as a CAD designer, working with software like AutoCAD, Fusion 360, Inventor, and CATIA v5. My services include technical drawings, product design, and 3D modeling. I specialize in creating steel structure and sheet metal fabrication drawings, as well as industrial machinery assembly and part drawings. Additionally, I am skilled in modifying STL files for 3D printing and converting images or PDFs to AutoCAD. I am excited to collaborate with you on your CAD design needs.

I am a mechanical engineer with a strong passion for mechanical design, product development, and engineering analysis. With expertise in CAD modeling, surface design, and finite element analysis (FEA)... Read more

I am a mechanical engineer with a strong passion for mechanical design, product development, and engineering analysis. With expertise in CAD modeling, surface design, and finite element analysis (FEA), I help businesses and individuals bring their ideas to life with precision and efficiency. My Expertise: ✔ Surface Design ✔ Machinery & Machine Design. ✔ STEP File Modification ✔ Assembly Design ✔ 2D Drafting ✔ FEA Analysis Software I Use: 🔹 SolidWorks 🔹 CATIA V5 🔹 Fusion 360 🔹 Autodesk Inventor

I am a mechanical engineering graduate from Jomo Kenyatta University of Agriculture and Technology in Kenya. I am versatile with CAD/CAM softwares like AutoCAD, Inventor Professional and Solidworks. I... Read more

I am a mechanical engineering graduate from Jomo Kenyatta University of Agriculture and Technology in Kenya. I am versatile with CAD/CAM softwares like AutoCAD, Inventor Professional and Solidworks. I am also able to do simple renderings on 3Ds Max as well as carry out FEA and CFD simulations. Engineering is an ever evolving field and every project I undertake is a learning opportunity.

Hi! I am a CAD designer specializing in functional 3D modeling for practical, real-world applications using Onshape. Over the last 2 years, I have gained hands-on experience designing custom brackets,... Read more

Hi! I am a CAD designer specializing in functional 3D modeling for practical, real-world applications using Onshape. Over the last 2 years, I have gained hands-on experience designing custom brackets, mounts, adapters, and structural components with high accuracy and attention to detail. Please note: I focus strictly on functional and mechanical CAD design (I do not offer artistic sculpting or physical 3D printing services). What I can help you with: Custom mounting brackets and adapter plates Functional replacement parts for broken items Enclosures, caps, and protective housings Small to medium complexity mechanical components Deliverables You Will Receive: High-precision parametric 3D CAD models (.STEP / .IGES) Print-ready 3D mesh files (.STL / .3MF) Why work with me? I take pride in working accurately and carefully. Because I focus on simple-to-medium complexity parts and am building my freelance profile, I offer budget-friendly rates and reliable communication. Send me a sketch or required measurements to get started!

Final year mechanical engineering student. Involved in the design of electric go-kart. Good expoxure in CAD softwares such as Fusion 360, PTC Creo, Siemens NX CAD and Blender.

Final year mechanical engineering student. Involved in the design of electric go-kart. Good expoxure in CAD softwares such as Fusion 360, PTC Creo, Siemens NX CAD and Blender.

I have done my Bachelor of Science (Hons) degree in Mechanical Engineering from NFC Institute of Engineering and Technology Multan. I have acquired a sound overall knowledge of leading edge engineerin... Read more

I have done my Bachelor of Science (Hons) degree in Mechanical Engineering from NFC Institute of Engineering and Technology Multan. I have acquired a sound overall knowledge of leading edge engineering principles, tools, and practices, with emphasis on designing, building and testing of mechanical systems. I am proficient in the use of various automated solutions including current releases of AutoCAD and SolidWorks and some of analysis software like Ansys, DEM, and ADAMS. I have worked as a leader in semester projects. Additionally, I have been a responsible leader in organizing seminars. I have gained acceptance Letter from International Conference on Aerospace and Aerodynamic under Track “Airship Design”. Recently I have published a research titled "Conversion of IC Engine into Magnetic Engine with minor Modification" in International Journal of Science and Engineering Research. My personal attributes include leadership and sound judgment as well as creativity, analytical and troubleshooting skills. I interact productively with people from diverse backgrounds.

To contribute to the well-established company’s success where my professional and educational experience could be utilized, benefit the organization, and enhance my career path. SKILLS • Knowledgeab... Read more

To contribute to the well-established company’s success where my professional and educational experience could be utilized, benefit the organization, and enhance my career path. SKILLS • Knowledgeable in AutoCAD • Knowledgeable in Sketch up plug-in for rendering 3Dmodels • Knowledgeable in D5, Enscape, and Lumion • Proficient in reading and understanding architectural, structural, mechanical, and electrical plans and diagrams. • Literate in Microsoft Word, Microsoft Power Point and Microsoft Excel. • Can Manage a Filing System A detail-oriented Draftsman with over 10 years of experience in 2D and 3D design across the Philippines and Qatar, with a strong specialization in landscape detailing, drafting, and rendering. Proficient in preparing shop drawings, BOQs, as-built documentation, and technical proposals for landscaping projects. Known for excellent coordination with crossfunctional teams, high-quality drafting output, and site-based precision. With over 6 years of focused experience in landscape drafting and design, I have developed strong expertise in preparing shop drawings, 3D models, and as-built documentation for large-scale landscaping projects. At Boom General Contractors and Metroscape in Doha, I led and supported the production of detailed landscape plans, coordinated with multidisciplinary teams, and managed site-based measurements for accurate project execution. My background combines technical precision with leadership in team workflows, ensuring high-quality outputs that meet client and project requirements.

I'm an Architect with more than 10 years of experience. Experienced with AutoCad, Archicad, Revit,Sketchup, Artlantis, 2D and 3D representation. At this moment, I'm a Master BIM Manager student at Z... Read more

I'm an Architect with more than 10 years of experience. Experienced with AutoCad, Archicad, Revit,Sketchup, Artlantis, 2D and 3D representation. At this moment, I'm a Master BIM Manager student at Zigurat.