Hire the best freelance Safe Design expert designers for your company

Mechanical and manufacturing engineer with a degree in Manufacturing Engineering Technology. Experience and certifications with Creo Parametric, Autodesk Inventor and Solidworks. Former fully appren... Read more

Mechanical and manufacturing engineer with a degree in Manufacturing Engineering Technology. Experience and certifications with Creo Parametric, Autodesk Inventor and Solidworks. Former fully apprenticed Tool and Die Maker. OSHA certified in General Industrial Safety and Health. I can respond to emails 24/7 and phone in the evening or by appointment during the day.

MASTER DEGREE DESIGN POLYTECHNIC SCHOOL REVERSE ENGINEERING/ TECHNICAL SOLUTION/ SIMULATION PROJECT: MOLDING /AUTOMOBILE /INDUSTRY PROJECT

MASTER DEGREE DESIGN POLYTECHNIC SCHOOL REVERSE ENGINEERING/ TECHNICAL SOLUTION/ SIMULATION PROJECT: MOLDING /AUTOMOBILE /INDUSTRY PROJECT

Experienced CAD Designer and Space Engineer.

Experienced CAD Designer and Space Engineer.

Professional Summary: Vetted Structural Engineer with 6 years of experience in 2D AutoCAD drafting, precise shop drawings, and photorealistic 3D architectural rendering. Engineering Expertise: Specia... Read more

Professional Summary: Vetted Structural Engineer with 6 years of experience in 2D AutoCAD drafting, precise shop drawings, and photorealistic 3D architectural rendering. Engineering Expertise: Specialized in sizing concrete/steel frames, foundation systems, and infrastructure site layouts following ASCE and AASHTO codes. Key Projects: Completed full structural modeling for large-scale industrial warehouses and complex commercial facilities with fast turnaround times.

Designing programs (Sap, Safe, Etab,) AUTOCAD drawing Program and • Design of most kinds Of Building (Rc Buildings). • Use Most Structural programs. • Knowledge of Shop drawing for Project.

Designing programs (Sap, Safe, Etab,) AUTOCAD drawing Program and • Design of most kinds Of Building (Rc Buildings). • Use Most Structural programs. • Knowledge of Shop drawing for Project.

I'm a professional structural Designer. i am complete Mawlana Bhashani Science and Technology University(MBSTU) Admin Building full and final (only me, not team works) design and drawing. my other wor... Read more

I'm a professional structural Designer. i am complete Mawlana Bhashani Science and Technology University(MBSTU) Admin Building full and final (only me, not team works) design and drawing. my other works is BAF Shaheen School, Kurmitola, Dhaka. Commendant Residence, BAFA, Jessore. Bongobondhu morul schulpter, BAFA, Jessore. Marine drive Milestone, Cox's Bazar etc.

Civil Engineer

Civil Engineer

Electronics Design Engineer from an ABET-accredited institution with over five years of professional experience teaching and designing electronic systems and CNC machines. Experience also includes one... Read more

Electronics Design Engineer from an ABET-accredited institution with over five years of professional experience teaching and designing electronic systems and CNC machines. Experience also includes one year Inspecting, maintaining, diagnosing, and repairing production equipment, computing systems, and automation systems.

ZAES is an integrated design‑build firm with 20+ years of experience. Our core specialty is concrete and steel structural modeling and drawings — BIM models, reinforcement detailing, shop drawings, an... Read more

ZAES is an integrated design‑build firm with 20+ years of experience. Our core specialty is concrete and steel structural modeling and drawings — BIM models, reinforcement detailing, shop drawings, and fabrication drawings. We also specialize in gridshells, space frames, PEB, and SCIP hybrid systems. In‑house architecture, MEP, and construction teams support full project delivery. Other services (MEP modeling, architectural modeling, SCIP drawings, BIM coordination) are available as support.

I have more than five years experience in multiple projects I will assure to give you quality work with minimum time frame

I have more than five years experience in multiple projects I will assure to give you quality work with minimum time frame

Hi, my name is Vlad. I'm an architect from Ukraine. I Have almost 10 years of experience in architectural visualization, 3d modeling, texturing, photorealistic rendering, and photo retouching.

Hi, my name is Vlad. I'm an architect from Ukraine. I Have almost 10 years of experience in architectural visualization, 3d modeling, texturing, photorealistic rendering, and photo retouching.

more than 12 years working experience in the construction and design field starting from preparing a preliminary coordination plan before the schematic design process, structural analysis, detail desi... Read more

more than 12 years working experience in the construction and design field starting from preparing a preliminary coordination plan before the schematic design process, structural analysis, detail design, calculations, BIM modeling, clash detection, general arrangement & reinforcement drawings , Coordination with other departments and checking for interdisciplinary clashes before submission to the client. - having previous experience of many types of buildings ( residential, industrial, high rise buildings, luxury villas, steel trusses, portal frames, water structures, wastewater treatment plant, RO planets elevated tanks, steel tanks) - design review, quality control, and coordination between disciplines.

i`m a structural engineer with 2 years of professional experince. i specialize in the design of reinforced concrete for both industrial and residential projects , and 2D drawing. i am expert in au... Read more

i`m a structural engineer with 2 years of professional experince. i specialize in the design of reinforced concrete for both industrial and residential projects , and 2D drawing. i am expert in autocad 2D , sap2000 and safe. my previous experince consulted on the analysis and safety checks of reinforced concrete residential building and 2D drawing. i am ready to apply my skills and experience to your projects and look forward to hearing from you.

- One year experience in civil engineering. - I worked in the construction field for a year. - now, I work in the field of railway renewal and maintenance.

- One year experience in civil engineering. - I worked in the construction field for a year. - now, I work in the field of railway renewal and maintenance.

Hello my name is Brice and I'm currently a stay at home dad who is looking to do part time drawings for your company. I have six years of 3D modeling experience and will be glad to provide you with a... Read more

Hello my name is Brice and I'm currently a stay at home dad who is looking to do part time drawings for your company. I have six years of 3D modeling experience and will be glad to provide you with a professional drawing that exceeds your needs. I was a manufacturing engineer at Bosch Rexroth for four years before my family decided it was best for me to stay home to help with the kids. I designed applications that helped improve the efficiency of the production workers as well as adjusted layouts. I designed equipment from small safety guards to upgrading an old system that used acid and Dot markers to mark our products to a laser that did both processes in one in half the time. I look forward to working with you.

Architectural & Engineering Services of Pakistan (AESP) was founded by Engr. Raja Tariq Nazir in December 2015 after his retirement from National Engineering Services of Pakistan (NESPAK) as General M... Read more

Architectural & Engineering Services of Pakistan (AESP) was founded by Engr. Raja Tariq Nazir in December 2015 after his retirement from National Engineering Services of Pakistan (NESPAK) as General Manager/Head Structural Engineering Division. Structural Engineering Division is the backbone of NESPAK working in diversified field of activities like Hydropower plants, Dams, Barrages, Irrigation System, Thermal Power Plants, Nuclear Power Plants, Bridges, Flyovers, Metro bus & train, Electricity & Water Transmission Lines, Substations, Harbors, Tunnels, Rehabilitation & Conservation of Structures, Airports and Railways etc. Architectural & Engineering Services of Pakistan (AESP) is a consulting organization providing professional services in the field of architecture and engineering. The team has a rich experience of providing consultancy services in design, supervision and project management of various projects. AESP has a full range of Architecture, Civil, Electrical, Mechanical, Interior Design and Computer Engineering with experts in diverse fields of Power Plants, Substations, Structural Engineering, Transportation Engineering, Construction Management, Project Management and Environmental Engineering

Dear sir, I am Nirav Panchal having 4 years experience of 3d cad modeling, Machine design with calculation, FEA analysis, With 100% Client satisfaction and positive rating. I always give my client u... Read more

Dear sir, I am Nirav Panchal having 4 years experience of 3d cad modeling, Machine design with calculation, FEA analysis, With 100% Client satisfaction and positive rating. I always give my client unlimited revision until satisfied. Are you searching for 100% Professional ,Eye-Catching & safe design? Yes ! you are at right place. I'm here to provide you my best services! My services 3d cad modeling (solid works , Creo , Auto cad), Machine design with calculation, FEA Analysis, Mechanical plant & machine layouts, 2d drawings,drafting with tolerance, necessary machining process, machining symbols etc. I am looking forward to more productive deals with You.! Have a safe Design. Thanks & Regards, Nirav P. Panchal.

As an Associate Member of the Institution of Mechanical Engineers (AM IMechE) I am studying towards becoming an Incorporated Engineer in hope of gaining a recognised IEng status. My professional ex... Read more

As an Associate Member of the Institution of Mechanical Engineers (AM IMechE) I am studying towards becoming an Incorporated Engineer in hope of gaining a recognised IEng status. My professional experience has focused on exposure to the design of mechanical components for manual & hydraulically operated valves in the Subsea & Topside Oil & Gas & Flood Defence Industries. Primarily, I use Autodesk Inventor for 3D Modelling and 2D Drafting of parts for manufacturability and assembly. I have a past experience of producing related calculations through the use of MathCAD for safe design of all parts in operation and a growing knowledge of FEA using Inventor for 3D Component Analysis. Other experience includes direct involvement with Sales, Production, Purchasing, Test & Assembly and with client meetings for project reviews and design updates. I aim to further my career by applying Design & Drafting support and sharing my growing knowledge of the products in order to benefit clients. I hope to make a beneficial impact by utilising Design Reviews and providing a solid structural method towards design inputs in order to help the work flow through numerous concurrent projects.

I am a Senior Injection Mold Designer and Tooling Engineer with 10 years of professional experience in plastic injection mold design, tooling development, and Design for Manufacturing (DFM). I am hig... Read more

I am a Senior Injection Mold Designer and Tooling Engineer with 10 years of professional experience in plastic injection mold design, tooling development, and Design for Manufacturing (DFM). I am highly proficient in Siemens NX 12 and specialize in designing production-ready injection molds for plastic parts. For the past 10 years, I have worked in mold design and have also served as a Design Team Leader, managing mold design activities and coordinating technical solutions throughout the tooling development process. My expertise includes: • Plastic Injection Mold Design • Complete Mold Assembly Design • DFM (Design for Manufacturing) • Parting Line & Mold Opening Direction • Core & Cavity Design • Slider & Lifter Mechanisms • Ejection System Design • Cooling System Design • Runner & Gate Design • Hot Runner Systems • Multi-Cavity Mold Design • Mold Base & Standard Components • Steel-Safe Design & Mold Modification • Mold Trial Support and T0/T1 Corrections • 2D Mold Drawings & BOM • Production-Oriented Tooling Design I can work from customer-provided STEP, IGES or native CAD data, review the plastic part from a tooling perspective, identify potential manufacturing issues, and develop the mold structure accordingly. My design approach focuses not only on CAD modeling, but also on manufacturability, machining accessibility, mold assembly, ejection, cooling, maintenance, part quality, and practical production requirements. I am experienced in working with engineering and manufacturing teams throughout the mold development process, including design reviews, DFM feedback, tooling modifications, and trial corrections.

I am Ameen Abdulaziz, an R&D engineer with three years of work experience and a bachelor's degree in aerospace engineering from King Fahd University of Petroleum and Minerals. I work in mechanical des... Read more

I am Ameen Abdulaziz, an R&D engineer with three years of work experience and a bachelor's degree in aerospace engineering from King Fahd University of Petroleum and Minerals. I work in mechanical design and simulation through MENO SIM: Model. Solve. Verify. I help project teams turn sketches, drawings and requirements into clear mechanical CAD models, and understand structural simulation evidence. My services include: • Mechanical part and assembly modeling in SolidWorks and CATIA. • Editable CAD, STEP exports, engineering drawings and prototype geometry within an agreed scope. • Structural simulation work in Abaqus, with loads, materials, model assumptions and verification defined before analysis. • Review of stress, deformation, contact, fatigue results and mesh sensitivity. • Clear technical reports, annotated figures and educational guidance. I have access to commercial SolidWorks, CATIA and Abaqus software. My ANSYS experience is educational; my current ANSYS installation is Student edition, so paid ANSYS solver runs require separate suitable commercial access. My published portfolio includes a knuckle-joint structural and fatigue assessment and an Abaqus pin-and-lug contact study with friction sensitivity, mesh comparisons and reaction-force checks. These are independent engineering demonstrations. I explain the engineering checks and the limits of the model rather than treating plots alone as proof of a safe design. I work remotely, am available daily and can start immediately after we agree the scope. Send the objective, reference files, required software version and deadline. I will confirm deliverables, estimated effort and revision allowance before work begins. Physical fabrication/testing and design certification are separate from my CAD and analysis services.