Hire the best freelance pipeline routing expert designers for your company

Proven success in coordinating, controlling, and executing end-to-end engineering and construction projects for oil & gas industry and RNG industry in North America, South America, Asia, and the Middl... Read more

Proven success in coordinating, controlling, and executing end-to-end engineering and construction projects for oil & gas industry and RNG industry in North America, South America, Asia, and the Middle East. Solution-oriented project controller with career marked by identifying and capitalizing on cost and efficiency improvements through effective problem solving and technical assistance. Expert in planning, cost control, and technical bid package preparation, plus creation of mechanical completion and pre-commissioning certificate books. Consummate projects engineer skilled in coordinating and executing conceptual, basic, and detail engineering design for oil & gas facilities, civil construction, mechanical installation, and commissioning of industrial plants. Experience spans oil wellhead and cluster construction, piping, and pipeline installation. Strong collaborator known for open door policy and ability to integrate all disciplines across multiple office environments and international cultures. Collaborative and empowering leader who clarifies project requirements with action steps and goals. Data analyst – Oil & Gas production, with a clear understanding of production KPI’s, custody transfer and quantification of production volumes. Identify deviation, alert and provide solution based on data acquisition.

Mechanical engineer with 4 years plus designing experiance in 2D & 3D modeling. Also have professional experiance on Piping layout, Isometric & Equipment Layout in Autodesk Plant 3D.

Mechanical engineer with 4 years plus designing experiance in 2D & 3D modeling. Also have professional experiance on Piping layout, Isometric & Equipment Layout in Autodesk Plant 3D.

As a highly skilled in product, mechanical, sheet metal, piping and structural design with good understanding of production and assembly processes, I’m apply my knowledge and experience in design, by... Read more

As a highly skilled in product, mechanical, sheet metal, piping and structural design with good understanding of production and assembly processes, I’m apply my knowledge and experience in design, by using design tools like PMDS/ E3D / CATIA/ Solidworks, AutoCAD, Microstation and many other. I am able to administrate these tools and perform software customization to increase efficiency. Working on “Brown field” / EPCM projects I have used to work in context of scanned environment in form of PointCloud (Leica / Z+F/ LMI). I’m able to work fully independently, or as part of the team, or to take lead role with high level of responsibility and determination to complete project in shortest possible time with highest level of quality of delivered solutions or end documentation. I’m able to communicate in English, Serbian, Croatian and limited German language.

Hi, My name is Gurtej Singh. I am a Mechanical engineer. Having more than 10 years of experience in the field. I am working as a freelancer with multinational companies and giving my services as a des... Read more

Hi, My name is Gurtej Singh. I am a Mechanical engineer. Having more than 10 years of experience in the field. I am working as a freelancer with multinational companies and giving my services as a design engineer and 3D modeling. I am well versed with SolidWorks and AutoCAD.

Mechanical Design Engineer with 12+ years of experience across the UAE and India, delivering industrial products and equipment from concept development through manufacturing handover. Advanced experti... Read more

Mechanical Design Engineer with 12+ years of experience across the UAE and India, delivering industrial products and equipment from concept development through manufacturing handover. Advanced expertise in parametric CAD, CAD customization with Autodesk Inventor iLogic, Product Data Management (PDM), Product Lifecycle Management (PLM), Autodesk Vault, CAM-ready design data, DFM/DFA, GD&T, engineering documentation, estimation and production support. Industry experience includes portable power distribution equipment, electrical enclosures, electromechanical integration, R&D/NPD, 3D printing, steel fabrication, water and wastewater systems, piping, sheet metal and heavy machinery attachments.

Bachelor of Science in Mechanical Engineering, with four years experience in: Machine Design Product Design HVAC Design Piping Design CAD Drafting Bill of Materials Equipment Design Process Design P&... Read more

Bachelor of Science in Mechanical Engineering, with four years experience in: Machine Design Product Design HVAC Design Piping Design CAD Drafting Bill of Materials Equipment Design Process Design P&ID Engineering Drawings Building Services Plant Design

I have a background in mechanical engineering since high school. I have experience working as an engineer in several contractor companies that are used to designing palm cooking oil factories.

I have a background in mechanical engineering since high school. I have experience working as an engineer in several contractor companies that are used to designing palm cooking oil factories.

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conduct... Read more

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conducting finite element analysis (FEA) using AUTODESK FUSION 360, drawing and preparing LAYOUT drawings. I'm currently working as a piping design engineer for a consultancy firm, responsible for producing P&ID's, ISO's, GA's and plot plan drawings. I contributed in projects for a reputable companies like ExxonMobil, ESSO, Chevron,.. I carried out my tasks using software programs like: AUTOCAD PLANT 3D, AUTODESK FUSION 360, AUTOCAD, DRAFTSIGHT, AVEVA PDMS,

I am a registered mechanical engineer in the Philippines and earned the fourth place out of 3,841 national licensure examinees. I have 7 years of working experience as a piping engineer and is mainly... Read more

I am a registered mechanical engineer in the Philippines and earned the fourth place out of 3,841 national licensure examinees. I have 7 years of working experience as a piping engineer and is mainly involved in 3D modelling of power plants and chemical plants.

I am a Mechanical Design Engineer and CAD Designer with hands-on experience in SolidWorks, AutoCAD, and Fusion 360. I specialize in 3D CAD modeling, product design, mechanical assemblies, engineering... Read more

I am a Mechanical Design Engineer and CAD Designer with hands-on experience in SolidWorks, AutoCAD, and Fusion 360. I specialize in 3D CAD modeling, product design, mechanical assemblies, engineering drawings, sheet metal design, and manufacturing-ready documentation. I have worked on industrial and mechanical design projects including plant layouts, piping rack planning, structural components, sheet metal products, and fabrication drawings. My experience also includes creating GADs, BOMs, detailed manufacturing drawings, and designs for CNC laser cutting and fabrication. I hold a Bachelor's degree in Mechanical Engineering and focus on creating accurate, practical, and manufacturable designs that meet client requirements and industry standards. I am committed to delivering high-quality CAD work with attention to detail, dimensions, functionality, and ease of manufacturing.

Enthusiastic Drafter and Designer with experience in piping and pipeline design. Expert in AutoCAD 2D, 3D, and isometric drawing. Familiar with PipeData Pro. Skilled in modeling with Plant 3D and prot... Read more

Enthusiastic Drafter and Designer with experience in piping and pipeline design. Expert in AutoCAD 2D, 3D, and isometric drawing. Familiar with PipeData Pro. Skilled in modeling with Plant 3D and prototyping, with achievements in cost reduction and efficiency improvement. Keen on providing creative solutions to complex piping and pipeline design problems.

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns.... Read more

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns. Towers, Steel Structure, Mechanical & Civil Drafting. Preparing propose initial conceptual design layouts for various projects. Ability to create detailed construction drawings independently which is included related specifications, and capable of enforcing such specifications. Involve in construction, supervision, inspection and material take-off. Involve with Auto CAD 2D & 3D,Bently open plant 3D-Modeler, Piping plan, piping Isometric Drawings, Sheet Metal Work, Mechanical Drawings, PFD, P&ID, and Civil Layout etc. A keen and dedicated Piping Designer having approx. 10+ years of experience in Oil & Gas, Petrochemical, and Mechanical equipment industries. My Responsibilities Includes: • Preparation and modification of Piping layouts. • Preparation of piping isometrics. • Extraction of isometrics form plan. • Piping of storage tank, vessel, heat exchanger, Pumps and Compressors  equipment layout and general arrangement drawings  Under Ground Piping Drawings  • Preparation and modification of support layout. • Preparation of M.T.O. (Weight Calculation) and B.O.Q. • Sketching to provide information and site conditions.  Preparing Steel Structure drawings for installation, proposed new Platform, Joints detail (Welded & Bolted) Bracing, ladders. • Fabrication detail drawings • Rigging plan views from PDS 3D model. • Site Supervision during Project execution and Turn Around. • Generation of bill of material for Projects. • Preparation and modification of Equipment drawings.  • Support marking as per stress analysis report.  Design the BOX UP for different kind of leakages  • PFD, P&IDs, MSDs.

Have a vast experience on working with AutoCAD. Have done many projects some of them are as below: 1.Naval Designs including Docks, Slipways, Vessels and Jetty. 2. Company Designs from Foundation to F... Read more

Have a vast experience on working with AutoCAD. Have done many projects some of them are as below: 1.Naval Designs including Docks, Slipways, Vessels and Jetty. 2. Company Designs from Foundation to Full working Condition. 3. Interior Designer with Housing Project and Furniture with Space saving Ideas. 4.Done Project of Oil Tankers, Tugs, Barges and Passenger Vessels also.

B.tech professional with 5 years of experience in Design and Planning.  Currently working at DESIGNTECH SYSTEMS LIMITED as an Engineer Design & Technical Services  (Design & Planning).  Previous... Read more

B.tech professional with 5 years of experience in Design and Planning.  Currently working at DESIGNTECH SYSTEMS LIMITED as an Engineer Design & Technical Services  (Design & Planning).  Previously worked at EAGLE TK INFOTECH and Tata steel Growth Shop as a Sr. Design  Engineer and Mechanical Design Engineer respectively.  Proficient in modeling and detailing of steel parts, casting equipment , pipeline , sheet metal ,BIW product design etc. by using UG NX 11.0 AND Creo3.0  Proficient in using Wind-chill PLM 10.2 for CRE-O parametric 3.0 and capable of solving different issues on PLM.  Proficient of using valves of piping and good knowledge of drawing study.  Good knowledge of GD & T and basics of tolerance stack up analysis.  Basic knowledge of manufacturing process and Glass FRP parts production.  An ambitious & hardworking individual with excellent relationship management skills.  Good communication skill in ENGLISH, HINDI, ORIYA and BENGALI languages respectively. Seeking CAD & GD&T related project or training related project.

I am expert and passionate in AutoCAD architecture designs (Interior and Exterior designs). I having 21 years experiences of AutoCAD designing, architectural designs, 3d modeling and rendering, water... Read more

I am expert and passionate in AutoCAD architecture designs (Interior and Exterior designs). I having 21 years experiences of AutoCAD designing, architectural designs, 3d modeling and rendering, water supply & sanitation pipelines designs, roads designs and GIS technician. I completed many projects and all my clients are satisfied of my work and behaviors. I am delivering the project in time with best quality and as per client’s specification. Client satisfaction is my top priority. for this reason, I do not apply in any job that I am not 100% capable of doing. It’s very easy: - Send me a short Brief of your project, a Photo, a Sketch, a PDF or you can simply tell me what you need. I will take your Architectural project then carefully revision and modify it with your expected imagination and time frame. What I can offer: - 1. Architectural Site plan. 2. Landscape Design. 3. Floor plans with Furniture layout. 4. Elevations + Sections. 5. Vectorize Drawing & Drafting. 6. Architectural detail working Drawings. 7. Preparation of Municipal Drawings. 8. 3D floor plans. 9. 3D Models Realistic Renders/3D Views. 10. 3D Animation/Walk through. 12. Pipelines Plan, cross section and longitudinal profile including valve chambers and hydraulic calculation. 13. Grading and Parcel drawings. 14. Product designs with correct scale and dimension. 15. Print ready PDF files/Images/Source files. I work with AutoCAD, AutoCAD Architecture, Civil 3d, ArcGIS, Qgis, Staad pro and Adobe illustrator. Prices and time will be negotiable always. Thank you. Subhash chand mahich www.mahichgothara.com

I am a PCB Designer with hands-on experience in PCB layout, schematic design, circuit design, component placement, and routing. I specialize in Altium Designer and focus on creating accurate, efficien... Read more

I am a PCB Designer with hands-on experience in PCB layout, schematic design, circuit design, component placement, and routing. I specialize in Altium Designer and focus on creating accurate, efficient, and manufacturing-ready PCB designs. I can assist with schematic capture, PCB layout, routing, design optimization, and Gerber file preparation. I am detail-oriented, committed to quality, and focused on delivering reliable solutions that meet client requirements and project goals.

Civil Engineer with over 20 years experience in the design of roads and drainage works, developing projects Urban and Rural Roads, Drainage Systems, Hydraulic Channels, Earth Movements and Digital Ter... Read more

Civil Engineer with over 20 years experience in the design of roads and drainage works, developing projects Urban and Rural Roads, Drainage Systems, Hydraulic Channels, Earth Movements and Digital Terrain Models (gradings); with advanced use of software design and documentation of civil engineering, AutoCAD Civil 3D, in workflows BIM (Building Information Modeling). Ingeniero Civil con más de 20 años de experiencia en el diseño de Obras de Vialidad y Drenajes, desarrollando proyectos de Vías Urbanas y Rurales, Sistemas de Drenajes, Canales Hidráulicos, Movimientos de Tierra y Modelos Digitales de Terreno (explanaciones); con un avanzado empleo de software de diseño y documentación de ingeniería civil, AutoCAD Civil 3D, en flujos de trabajo de Modelado de información para la construcción (BIM).

• To Design PLANT LAYOUT for proposal as per client’s requirement. • Preparation of “CIVIL AND MECHANICAL G.A.” as per client’s approved plant layout. • Preparation of PFD (Process Flow Diagram). • Pr... Read more

• To Design PLANT LAYOUT for proposal as per client’s requirement. • Preparation of “CIVIL AND MECHANICAL G.A.” as per client’s approved plant layout. • Preparation of PFD (Process Flow Diagram). • Preparation of P&ID(PIPING AND INSTRUMENTATION DIAGRAM). • To prepare the FABRICATION DRAWINGS for the components to be fabricated. • Preparation of PIPING DRAWINGS. • To generate the BOM (BILL OF MATERIAL) for every drawings of the respective projects. • To visit the respective site for checking the progress and cross checking the practice difficulties and introduce them in the drawings as well as layouts.

An experienced Mechanical Design Engineer with a proven track record of success of over 20 years in commercial engineering market sectors mostly within the water industry along with some industrial ap... Read more

An experienced Mechanical Design Engineer with a proven track record of success of over 20 years in commercial engineering market sectors mostly within the water industry along with some industrial applications. Providing high-level mechanical design engineering practices to build consistently improved business performance. Recognised for commitment & quality of work to identify solutions for customer issues, undertaking and assuming additional responsibilities. Strong leadership, strategic planning & design & development experience. Deadline driven & quality focused, with excellent relationship management skills. Experienced in assessing the whole project scope, end to end project management, design reviews, systems analysis, solution definition, design & development, testing, manufacturing, hydraulics, mechanical fault diagnosis & resolution for a wide variety of equipment, quality control & assurance, documentation, project budget control, equipment procurement, design supervision, H&S risk assessment, installation method statements & system updates.

Hello, I am a mechanical engineer with over 10 years of experience in CAD Field. My area of expertise is Pipe Line Routing and product design. I have given my services to many Multinational FMCG compa... Read more

Hello, I am a mechanical engineer with over 10 years of experience in CAD Field. My area of expertise is Pipe Line Routing and product design. I have given my services to many Multinational FMCG companies.

I am Rishikesh Dagde, an experienced Pipeline Designer with more than 14 years in the Oil & Gas and Petrochemical sector. I specialize in pipeline routing, alignment sheets, crossing drawings, piping... Read more

I am Rishikesh Dagde, an experienced Pipeline Designer with more than 14 years in the Oil & Gas and Petrochemical sector. I specialize in pipeline routing, alignment sheets, crossing drawings, piping layouts, and as-built work. I have been part of several major projects in India, Kuwait, and Iraq, contributing to both basic and detailed engineering. I am skilled in AutoCAD, Civil 3D, and drafting tools, and I always focus on delivering accurate and reliable design solutions.

Proficient at CAD design of industrial components and pipeline routing and routing of piping systems, BOM, isometrics, static simulations.

Proficient at CAD design of industrial components and pipeline routing and routing of piping systems, BOM, isometrics, static simulations.

Project Manager with more than fifteen years of expertise delivering engineering solutions. Extensive experience In Natural Gas pipeline routing, development, and permitting.

Project Manager with more than fifteen years of expertise delivering engineering solutions. Extensive experience In Natural Gas pipeline routing, development, and permitting.

20+ years of experience in in oil and gas pipeline routing, MTO extraction, in E3D Software and Auto Plnt 3D. Anadatation, building layout, 3d models in AutoCAD

20+ years of experience in in oil and gas pipeline routing, MTO extraction, in E3D Software and Auto Plnt 3D. Anadatation, building layout, 3d models in AutoCAD