Hire the best Multilayer PCB Design experts for your company

Hardware Design Engineer specializing in High-Speed Digital, Power Electronics, and complex PCB layouts (up to 6-layer HDI). Proven ability to architect commercial-grade systems from schematic capture... Read more

Hardware Design Engineer specializing in High-Speed Digital, Power Electronics, and complex PCB layouts (up to 6-layer HDI). Proven ability to architect commercial-grade systems from schematic capture to routing of impedance-controlled buses (PCIe, USB 3.0, Gigabit Ethernet). Adept at component-level hardware diagnostics, board bring-up, and SMD rework.

I design medical-grade PCBs for EEG, biosensor and wearable devices - from blank schematic to a validated, manufacturable board. Most of my work sits where sub-microvolt analog meets high-speed digit... Read more

I design medical-grade PCBs for EEG, biosensor and wearable devices - from blank schematic to a validated, manufacturable board. Most of my work sits where sub-microvolt analog meets high-speed digital. I have shipped 8-channel EEG acquisition hardware built around the TI ADS1299 (electrode front end, RLD/CMRR design, shielding and ground-plane strategy that protects a 1 uV signal), a next-generation health smartwatch (nRF5340, MAX86150 ECG/PPG/SpO2, BQ51003 wireless charging, ADP5360 PMIC), and a 4-layer impedance-controlled carrier board for a handheld dermatology imaging device (NXP i.MX6UL SoM, MIPI CSI/DSI, USB 2.0, LTE/Wi-Fi/GPS). What I do for clients: - Schematic capture and multi-layer PCB layout in Altium Designer and KiCad - Biosignal analog front ends: EEG, ECG, EMG, PPG, SpO2 (ADS1299, ADS1292, MAX86150, AD8232) - High-speed and mixed-signal layout: stack-up design, impedance control, signal and power integrity, EMI/EMC-aware routing - Wearable and battery-powered design: PMIC selection, fuel gauging (MAX17055), microamp sleep budgets, wireless charging - Design for manufacturing: BOM development, component sourcing, fabrication and assembly outputs, DFM review - Firmware bring-up and debug: STM32, nRF52/nRF5340, ESP32, bare-metal C/C++, SPI/I2C/BLE, JTAG and logic analyzer work Background: BS in Electrical Engineering from COMSATS University Islamabad, Altium-certified, and over two years leading PCB and embedded hardware teams at medical device companies, including design and documentation work aimed at FDA and regulatory compliance. I am comfortable owning a board end to end or dropping into an existing design for review, respins and debugging. Clear documentation, revision history and honest timelines come standard.

I am an Electrical Engineer and PCB with more than 10 years of experience in electronics and PCB design. I have experience designing digital boards up to 20 layers and RF boards up to 8 layers, includ... Read more

I am an Electrical Engineer and PCB with more than 10 years of experience in electronics and PCB design. I have experience designing digital boards up to 20 layers and RF boards up to 8 layers, including projects involving DDR4, ADC/DAC and FPGA-based high-speed systems. I work with Altium Designer, Cadence Allegro and OrCAD. I am an Electrical Engineer and PCB & Hardware Design Engineer with more than 10 years of experience in electronics and PCB design. My main expertise is in RF, high-speed digital, FPGA-based and complex multilayer PCB design. I have experience designing digital boards up to 20 layers and RF boards up to 8 layers, including projects involving DDR4, ADC/DAC and FPGA-based high-speed systems. I work with Altium Designer, Cadence Allegro and OrCAD. Areas of expertise: RF and high-frequency PCB design High-speed digital PCB design Complex multilayer PCB design FPGA-based hardware DDR4, ADC and DAC Differential pair routing Controlled impedance design PCB stack-up and layer planning Blind vias and back-drilling Component placement and routing optimization DFM and manufacturing considerations PCB design review Reverse engineering Hardware prototyping and product development I have experience collaborating with mechanical, manufacturing, assembly and purchasing teams throughout the product development process. I am available for international freelance projects and long-term remote collaboration in electronics, embedded hardware, telecommunications, robotics, IoT and industrial electronics. I am particularly interested in challenging projects involving RF, high-speed digital systems, FPGA hardware and complex multilayer PCBs.

Thank you for visiting my profile. I'm Engr. Muhammad Uzair, a hardware and firmware engineer with 6+ years of experience delivering production-ready electronic solutions. I specialize in: - Multil... Read more

Thank you for visiting my profile. I'm Engr. Muhammad Uzair, a hardware and firmware engineer with 6+ years of experience delivering production-ready electronic solutions. I specialize in: - Multilayer PCB design (up to 8 layers) — signal integrity, RF, IoT, and power electronics - Power electronics design — DC-DC and AC-DC conversion circuits - Firmware development for STM32, dsPIC, ESP32/ESP8266 with UART, SPI, I2C, CAN, USB, and MODBUS - RF circuit design — filters, antenna tuning, and wireless systems From schematic capture to Gerber files and working prototype — I manage the full design cycle with precision and on-time delivery. Let's bring your ideas to life!

I am an Electronics Hardware Design Engineer with experience in PCB Design, Power Electronics, Embedded Systems, and Product Development. I have worked on real-world hardware projects, designing relia... Read more

I am an Electronics Hardware Design Engineer with experience in PCB Design, Power Electronics, Embedded Systems, and Product Development. I have worked on real-world hardware projects, designing reliable and manufacturable PCBs from concept to prototype. I focus on delivering high-quality designs with attention to performance, manufacturability, and timely project completion. Whether it's a new product or improving an existing design, I'm committed to providing practical and dependable engineering solutions. Core Skills : - PCB Design & Layout (Altium Designer, KiCad) - Power Electronics (SMPS, DC-DC Converters, Battery Chargers, Inverters) - Embedded Systems (STM32, ESP32, Arduino) - Schematic Review & PCB Design Optimization - EMI/EMC Aware PCB Layout - Design for Manufacturing (DFM), Design for Assembly (DFA) - Prototype Assembly, Testing & Debugging - Gerber Generation & Manufacturing Support

I’m an Electronic Engineering student at the University of Padua with a strong interest in hardware development, embedded systems, and PCB design. Alongside my studies, I work on personal electronics... Read more

I’m an Electronic Engineering student at the University of Padua with a strong interest in hardware development, embedded systems, and PCB design. Alongside my studies, I work on personal electronics projects involving schematic design, multilayer PCB layout, microcontrollers and MPUs, high-speed digital interfaces, power electronics, and embedded software. I’m particularly interested in designing complete systems, from component selection and schematic capture through PCB routing, signal integrity considerations, firmware, and hardware bring-up. I enjoy working on technically challenging projects and continuously expanding my knowledge in areas such as embedded Linux, digital electronics, RF, FPGA design, high-speed interfaces, and computer architecture. I’m interested in opportunities where I can apply and further develop my skills in electronic hardware, PCB design, and embedded systems.

Experienced PCB Design Engineer specializing in multilayer, high-speed, and mixed-signal PCB layout design for industrial, power electronics, aerospace, and defense applications.

Experienced PCB Design Engineer specializing in multilayer, high-speed, and mixed-signal PCB layout design for industrial, power electronics, aerospace, and defense applications.

15+ years of experienced in the field of HW design and development life cycle process, Hands on experienced in Automative domain, Medical instrumentations, EMI/EMC knowledge, Highspeed board design, S... Read more

15+ years of experienced in the field of HW design and development life cycle process, Hands on experienced in Automative domain, Medical instrumentations, EMI/EMC knowledge, Highspeed board design, SI/PI analysis.

I am a PCB Designer specializing in high-speed and multilayer PCB design, with hands-on experience in transforming complex electronic concepts into reliable, manufacturable hardware. My expertise incl... Read more

I am a PCB Designer specializing in high-speed and multilayer PCB design, with hands-on experience in transforming complex electronic concepts into reliable, manufacturable hardware. My expertise includes schematic capture, signal integrity, power distribution, impedance-controlled routing, and design optimization using Altium Designer. I am committed to delivering high-quality PCB solutions by combining technical precision, attention to detail, and continuous learning.

I am an electronics engineer with 24+ years of experience designing advanced analog and digital electronic systems across the automotive, aerospace, automation, and consumer electronics industries. I... Read more

I am an electronics engineer with 24+ years of experience designing advanced analog and digital electronic systems across the automotive, aerospace, automation, and consumer electronics industries. I specialize in microcontroller-based hardware architecture, multilayer PCB design, simulation, embedded systems, and system-level integration. I bring deep expertise in circuit analysis, component selection, firmware interaction, and troubleshooting, with a strong focus on quality, innovation, and continuous improvement.

Professional PCB Design Engineer with 25+ completed client projects, delivering robust, production ready embedded hardware. Specialized in multilayer PCB design, including controlled impedance routi... Read more

Professional PCB Design Engineer with 25+ completed client projects, delivering robust, production ready embedded hardware. Specialized in multilayer PCB design, including controlled impedance routing, high-speed interfaces USB, PCIe, HDMI, Ethernet, power integrity, Arduino, STM32, ESP32. I provide schematics, optimized layouts and boards, Gerber packages, BOM, pick and place, stackup definition, DFM ready files with Firmware Development. If it’s a custom PCB project or product prototype, I’ll deliver reliable, production ready PCB designs with professional support and fast communication.

I am a professional PCB Design Engineer specializing in high-quality, manufacturing-ready printed circuit board (PCB) solutions for startups, businesses, engineers, and hardware innovators. I transfor... Read more

I am a professional PCB Design Engineer specializing in high-quality, manufacturing-ready printed circuit board (PCB) solutions for startups, businesses, engineers, and hardware innovators. I transform concepts into reliable electronic products by delivering optimized PCB layouts, accurate schematics, and production-ready manufacturing files. My expertise covers single-layer, double-layer, and multilayer PCB design with a strong focus on signal integrity, power optimization, component placement, EMI/EMC considerations, and Design for Manufacturing (DFM). Whether you're developing an IoT device, embedded system, consumer electronics, industrial controller, robotics project, or prototype, I ensure every design meets industry standards for performance and reliability. My services include: PCB Layout & Routing Schematic Capture Gerber & Manufacturing Files Bill of Materials (BOM) Pick & Place Files Component Selection Design Rule Check (DRC) Design for Manufacturing (DFM) Reverse Engineering PCB Modification & Redesign Prototype Preparation Multilayer PCB Design High-Speed PCB Design IoT & Embedded Hardware PCB Development I prioritize precision, clear communication, fast turnaround times, and long-term client satisfaction. Whether you need a simple prototype or a complex production-ready PCB, I'm committed to delivering efficient, reliable, and high-performance designs that help bring your electronic products to life.

I help startups and companies develop reliable, production-ready electronic products, from architecture and schematic design to PCB layout, prototyping, and manufacturing support. My experience inclu... Read more

I help startups and companies develop reliable, production-ready electronic products, from architecture and schematic design to PCB layout, prototyping, and manufacturing support. My experience includes high-speed multilayer PCB design, mixed-signal systems, power electronics, BMS development, and embedded hardware for industrial and IoT applications. I have worked with interfaces such as DDR, Gigabit Ethernet, USB, and M.2 while applying signal integrity, power integrity, EMI, and manufacturability considerations throughout the design process. I focus on clear communication, manufacturable designs, and reducing prototype iterations to help clients move faster toward successful products.

Senior Embedded Systems & Hardware Engineer with 5+ years of experience in end-to-end product development. I specialize in taking complex concepts from schematic design to mass-producible PCB layouts.... Read more

Senior Embedded Systems & Hardware Engineer with 5+ years of experience in end-to-end product development. I specialize in taking complex concepts from schematic design to mass-producible PCB layouts. Core Expertise: Hardware: Multilayer PCB Design (EasyEDA, Altium), Analog/Digital Circuitry, Power Electronics (BMS/EV). Firmware: C/C++, Python, RTOS (FreeRTOS), Communication Protocols (CAN, I2C, SPI, Modbus). Prototyping: 3D Printing, Enclosure Design, and Rapid Hardware Debugging. Robotics : Building autonomous Robots on ROS2. I focus on Design for Manufacturability (DFM) to ensure your first prototype isn't your last. Available for urgent debugging, design reviews, and full-scale IoT development.

I am an Electronics Engineering undergraduate specializing in PCB design, embedded systems, and hardware development. I design reliable, manufacturable PCBs using KiCad, Altium and Eagle CAD, taking p... Read more

I am an Electronics Engineering undergraduate specializing in PCB design, embedded systems, and hardware development. I design reliable, manufacturable PCBs using KiCad, Altium and Eagle CAD, taking projects from schematic capture to production-ready manufacturing files. My expertise includes: • Single-layer and multilayer PCB design • Schematic capture • STM32, ESP32, Arduino hardware • Power supply and battery management circuits • Analog and digital circuit design • IoT hardware development • LTspice circuit simulation • Design optimization for manufacturability I deliver complete design packages including: ✔ Project files ✔ Gerber files ✔ Drill files ✔ BOM ✔ Pick & Place files ✔ Assembly drawings My goal is to create reliable, efficient, and production-ready hardware tailored to each client's requirements.

I’m a PCB Design & Embedded Hardware Engineer with hands-on experience in multilayer PCB design, hardware testing, debugging, and validation using Altium Designer. I specialize in high-speed digital,... Read more

I’m a PCB Design & Embedded Hardware Engineer with hands-on experience in multilayer PCB design, hardware testing, debugging, and validation using Altium Designer. I specialize in high-speed digital, RF, low-power, mixed-signal, rigid, and flexible PCB design, with strong attention to signal integrity, power integrity, controlled impedance, grounding, EMI/EMC, thermal performance, and manufacturability. I have experience managing the complete PCB development process, including schematic review, component selection, custom symbol and footprint creation, Altium library maintenance, layer-stack design, component placement, routing, ERC/DRC verification, DFM/DFA review, and manufacturing-file generation. I also have practical experience with PCB bring-up, fault finding, soldering, rework, and testing of analogue, digital, power, and communication circuits. My technical background also includes ESP32, STM32, Raspberry Pi, Arduino, CAN, RS485, UART, SPI, I²C, MQTT, Bluetooth, Wi-Fi, and power electronics. I hold a B.Sc. Eng. (Hons) in Electrical and Electronic Engineering from the University of Jaffna. Key strengths: Altium Designer, multilayer PCB layout, RF/high-speed design, flex PCB design, low-power hardware, custom PCB libraries, embedded hardware, PCB testing, debugging, and design-for-manufacturing.

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Specia... Read more

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Special Mastery in ALTIUM. Executed more than 500 projects 2. Proficient in using industry-standard design tools such as Altium Designer, EAGLE, KICAD, EASYEDA and PROTEUS, ensuring accurate and efficient circuit development. 3. IPC Certified Symbols and footprints Creation, High Speed PCB Design upto 5GHz 4. Multilayer PCB Design experience upto 32 Layers, Impedance Control, Length Matching, Antenna Tuning, Blind Vias, Buried Vias, Through Hole Vias 5. DFX(Design for Excellence) - DFA, DFM and DFT. First Time Right PCB - 98% 6. Compact PCB Design, Signal Integrity, Power Integrity, Single Sided, Double sided placement 7. Design Verification through Design Checklists ensuring robust, reliable and quality design 8. Applications- IOT, Consumer, Medical, Industrial, Defense etc 9. Microcontroller Interfacing - STM32, STM8S, ESP32, ESP8266, NXP, TI chipsets etc 10. Wireless Products, Battery Operated, Low Power, Low cost 11. Design Optimization - Could optimize design of any product by at least 25% 12. Design for Quality, Design Review 13. PCB Prototyping, Contract Manufacturing 14. Firmware Development - ARDUINO, C, C++ etc 15. Enclosure Design, 3D Printing, Sheet Metal, 16. Production Support 17. EMI EMC Compliant Design - RE, EMHF, Surge, EFT, Burst, Impulse, 35KV 18. Standards Experience - UL, CISPER, CE, Please contact me if you would like to develop a robust and reliable product If you are looking to bring your idea to life, contact me :)

I'm a Hardware & Embedded Systems Engineer with 3+ years of experience designing reliable electronic products from concept to production. I specialize in PCB Design, Embedded Systems, IoT Hardware, Fi... Read more

I'm a Hardware & Embedded Systems Engineer with 3+ years of experience designing reliable electronic products from concept to production. I specialize in PCB Design, Embedded Systems, IoT Hardware, Firmware Development, Wearable Electronics, and Rapid Prototyping, helping startups and businesses transform ideas into manufacturable products. Core Expertise PCB Design & Hardware Development Schematic Capture & Multilayer PCB Design (2-8 Layers) High-Speed PCB Layout Signal Integrity & Power Integrity RF PCB Design Power Supply Design (Buck, Boost, LDO, Battery Management) Analog & Digital Circuit Design Sensor Integration Design for Manufacturing (DFM), Design for Assembly (DFA), EMC/EMI Best Practices Gerber, BOM, Pick & Place (CPL), Assembly Drawings, Manufacturing Files Embedded Systems & Firmware Embedded C/C++ STM32 ESP32 Nordic nRF52 / nRF53 ARM Cortex-M Raspberry Pi Embedded Linux Basics Driver Development Bootloader Integration OTA Firmware Updates IoT & Wireless Connectivity Bluetooth Low Energy (BLE) Wi-Fi LoRa MQTT GSM / LTE NFC RFID CAN Bus RS485 RS232 UART SPI I2C USB PCB Design Tools Altium Designer KiCad EasyEDA Autodesk Eagle Altium 365 CircuitMaker LTspice PSpice Prototyping & Manufacturing JLCPCB PCBWay Seeed Fusion DigiKey Mouser Electronics LCSC Component Selection & BOM Optimization Prototype Bring-up Hardware Debugging Testing & Validation Industries Internet of Things (IoT) Wearable Electronics Consumer Electronics Industrial Automation Robotics Smart Devices Medical Electronics Wireless Products Battery-Powered Systems What I Offer: - Complete Hardware Product Development - Production-Ready PCB Designs - Clean, Organized Schematics - Fast Communication - Optimized BOM for Lower Manufacturing Cost - Reliable Embedded Firmware - Manufacturing Support from Prototype to Production -Strong Troubleshooting & Hardware Debugging Skills Whether you need a custom PCB, IoT device, BLE wearable, STM32 or ESP32-based product, embedded firmware, or a complete hardware product development solution, I can help deliver a reliable, production-ready design. Let's build your next electronic product together.

I'm a professional PCB Design Engineer with a strong background in electronics, robotics, and electrical system design. I help clients transform their ideas into real, working hardware — from schemati... Read more

I'm a professional PCB Design Engineer with a strong background in electronics, robotics, and electrical system design. I help clients transform their ideas into real, working hardware — from schematic to production-ready PCBs. With a strong command of both hardware and firmware, I bring full-stack electronics development under one roof. My Core Services: PCB Design & Layout (Single, Double, Multilayer) Schematic Capture & Circuit Design High-Speed & Compact PCB Layouts Robotics System Design & Control Electrical Drawing and Layout Design (AutoCAD Electrical) Tools & Platforms I Work With: Altium Designer, EasyEDA Proteus, Multisim for simulation Autodesk AutoCAD for electrical schematics Why Choose Me? Clear communication & timely delivery Expertise across both hardware and embedded firmware Strong problem-solving skills and attention to detail Focused on building long-term working relationships Whether you're a startup, engineer, or company looking for a reliable PCB and embedded systems expert, I’m here to bring your electronic projects to life. Let’s connect and discuss how I can help with your next project!

I am a PCB Design Engineer specializing in electronic hardware development, schematic design, and professional PCB layout. I help turn concepts into reliable, manufacturable circuit boards by focusing... Read more

I am a PCB Design Engineer specializing in electronic hardware development, schematic design, and professional PCB layout. I help turn concepts into reliable, manufacturable circuit boards by focusing on performance, quality, and design standards. My experience includes designing multilayer PCBs, mixed-signal circuits, embedded hardware, power electronics, and production-ready documentation. I am skilled in schematic capture, component selection, PCB layout optimization, DFM/DFA practices, and generating manufacturing files such as Gerbers, BOMs, and assembly drawings. I work with engineers, startups, and product developers to create efficient hardware solutions from prototype to production. My goal is to deliver clean, reliable PCB designs that meet technical requirements and manufacturing needs. Core expertise: • PCB Design & Layout • Schematic Capture • Multilayer PCB Development • Analog & Digital Electronics • Embedded Hardware Design • Power Supply PCB Design • DFM/DFA Optimization • Gerber, BOM & Manufacturing Documentation

Proficient in Altium Designer, Cadence Allegro, OrCAD Schematic, and PADS Layout. Experienced in high-speed design, multilayer PCB layouts, and signal integrity analysis. Skilled in multilayer board d... Read more

Proficient in Altium Designer, Cadence Allegro, OrCAD Schematic, and PADS Layout. Experienced in high-speed design, multilayer PCB layouts, and signal integrity analysis. Skilled in multilayer board design and high-speed signal routing. An effective communicator with experience in design documentation and design reviews. Successfully designed and delivered numerous load board and burn-in PCB projects from concept to production.

PCB Design Engineer with over 8 years of experience with strong expertise in multilayer, high-speed, and mixed-signal board design. Skilled in tools such as Cadence Allegro 17.2 X, OrCAD Capture. Pr... Read more

PCB Design Engineer with over 8 years of experience with strong expertise in multilayer, high-speed, and mixed-signal board design. Skilled in tools such as Cadence Allegro 17.2 X, OrCAD Capture. Proficient in schematic capture, component placement, routing, and DFM/DFT compliance. Hands-on experience in ATE boards, test interface boards, and industrial control PCBs. Strong understanding of signal integrity, impedance control, and thermal management. Committed to delivering reliable, manufacturable designs that meet quality and timeline requirements.

PCB Layout Design expert with 4.5+ years of experience in schematic capture, library management, and creating layouts using tools like Altium Designer, Cadence OrCAD/Allegro, KiCAD, PADS Layout, and X... Read more

PCB Layout Design expert with 4.5+ years of experience in schematic capture, library management, and creating layouts using tools like Altium Designer, Cadence OrCAD/Allegro, KiCAD, PADS Layout, and Xpedition/Dx Designer. Proficient in high-speed, multilayer PCB designs, IC package substrates, signal integrity, and power distribution networks. Delivered 60+ consumer electronics, medical, and industrial system applications, consistently achieving EMI/EMC compliance.

I am a professional PCB Designer and Hardware Engineer specializing in the design and development of high-performance, multi-layer circuit boards. - Complex System Integration: Combine RF, analog, an... Read more

I am a professional PCB Designer and Hardware Engineer specializing in the design and development of high-performance, multi-layer circuit boards. - Complex System Integration: Combine RF, analog, and digital blocks into cohesive, functional designs. - Strict Quality Standards: Ensure optimal signal integrity, power integrity, EMC compliance, and design-for-manufacturing (DFM). - End-to-End Engineering: Provide precise, detail-oriented support from initial schematic capture through final layout and fabrication. - Production-Ready Solutions: Deliver reliable hardware customized to client needs and optimized for performance, cost, and scalability. Core Expertise: - Altium Designer - KiCad - C++

Detail-oriented PCB Design Engineer with 10+ years of experience in high-speed multilayer PCB development for semiconductor test systems. In addition to engineering expertise, brings strong documentat... Read more

Detail-oriented PCB Design Engineer with 10+ years of experience in high-speed multilayer PCB development for semiconductor test systems. In addition to engineering expertise, brings strong documentation management, vendor coordination, workflow tracking, and process improvement skills. Experienced in supporting cross-functional teams in structured, deadline-driven environments. Offering both technical design capability and reliable remote administrative support.