Hire the best freelance mep drafting expert designers for your company

AS degree in drafting and design Highly proficient in AutoCAD and Solidworks Efficient in Revit and Bluebeam Proficient in Microsoft office products

AS degree in drafting and design Highly proficient in AutoCAD and Solidworks Efficient in Revit and Bluebeam Proficient in Microsoft office products

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating comp... Read more

Diverse and skilled Mechanical and Electrical Draughtsman with 18 years experience in Building Services (MEP) installations, design and drafting. Several years experience in Oil and Gas, creating complex hydraulic control skids for offshore use

An Electrical Building Designer with Decade plus of experience in generating designs. I have good experience in electrical and Lighting Design & Calculations for Homes, Office Buildings , Schools and... Read more

An Electrical Building Designer with Decade plus of experience in generating designs. I have good experience in electrical and Lighting Design & Calculations for Homes, Office Buildings , Schools and Retail . I can do Electrical Services Drawings in 2d AutoCAD, Power Calculations IEC Standard. Scope of Services: Electrical lighting design Electrical Power design Electrical load calculation schedule Electrical schematic diagram Distribution Board Main Panel Cable and Panel size Single line diagram CCTV Smoke/Heat detectors Lightning Arrestor

have experience in designing and executing entire projects including school, hospital, residences, renovation, small scale factory, apartment etc.

have experience in designing and executing entire projects including school, hospital, residences, renovation, small scale factory, apartment etc.

I work as a MEP engineer, i design HVAC, Plumbing and Fire Fighting projects. I also has a part time job as a CNC designer, i mainly design doors, curtain holders and decorations for router machines 1... Read more

I work as a MEP engineer, i design HVAC, Plumbing and Fire Fighting projects. I also has a part time job as a CNC designer, i mainly design doors, curtain holders and decorations for router machines 1220x2440mm.

I am Engr. Arslan Ilyas, having Masters in Architecture, very keen to achieve my goal in life. I have been in the business of construction from the last 2 years. I have vast experience about the desi... Read more

I am Engr. Arslan Ilyas, having Masters in Architecture, very keen to achieve my goal in life. I have been in the business of construction from the last 2 years. I have vast experience about the designing of houses, restaurants, shops, hospitals, hotels, shopping malls, offices, and reception area, outlets, Interior and exterior design. My goal is to make this world a better place for you. I have hands on skills in AutoCAD, 3ds max, Sketch up, Adobe Photoshop, Illustrator and Primavera P6. I am also PMP certified and successfully completed many projects. I work with dedication in a professional manner to the utmost customer satisfaction. Principals of my work.  Effective  Fastest  On time delivery  Best Price Please contact me before placing the order. Thank You.

I am an highly-skilled MEP (Mechanical Electrical and Plumbing) Engineer. I specialize in the conceptual MEP Engineering services Design, project profiling, Costing, and Consulting. I have over 6 year... Read more

I am an highly-skilled MEP (Mechanical Electrical and Plumbing) Engineer. I specialize in the conceptual MEP Engineering services Design, project profiling, Costing, and Consulting. I have over 6 years of experience in residential, commercial, medical, hospitality, academic, corporate, and industrial MEP building services. I'm skilled with the use of tools such as AutoDesk AutoCAD, Dialux Evo Suite, Siemens Simaris, and Ecodial advanced calculation suite.

Get your ideas drafted, designed and delivered by me. Highly diligent to deliver to new projects based on the client requirements.

Get your ideas drafted, designed and delivered by me. Highly diligent to deliver to new projects based on the client requirements.

Expert in drafting detailed building services systems, including HVAC, lighting, electrical, fire protection, and hydraulics. Skilled in creating accurate technical drawings and converting existing do... Read more

Expert in drafting detailed building services systems, including HVAC, lighting, electrical, fire protection, and hydraulics. Skilled in creating accurate technical drawings and converting existing documentation into modern CAD formats. Proficient in converting PDF markups (engineer markups) to CAD format. Flexible to provide any drafting resources tailored to specific project requirements, ensuring high-quality and precise designs.

I specialize in PCB design, schematic capture, PCB layout optimization, and architectural CAD drafting for startups, businesses, engineers, and construction professionals. My goal is to deliver clean... Read more

I specialize in PCB design, schematic capture, PCB layout optimization, and architectural CAD drafting for startups, businesses, engineers, and construction professionals. My goal is to deliver clean, manufacturable, and production-ready designs that combine technical precision, functionality, and professional presentation. I work on both electronics and architectural projects, helping clients transform concepts into practical real-world solutions. My PCB design services include: • Schematic Capture • PCB Layout & Routing • Gerber & Drill File Generation • BOM Preparation • Multi-layer PCB Design • 3D PCB Rendering • DFM & Manufacturing Optimization My architectural CAD services include: • Floor Plans • Architectural Drafting • 2D & 3D CAD Modeling • Elevations & Sections • Construction Drawings • Permit Drawings • Space Planning • Rendering & Presentation Drawings Software experience includes KiCad, Altium Designer, EasyEDA, AutoCAD, Revit, SketchUp, and Blender. I focus on clear communication, accuracy, attention to detail, and delivering high-quality work that is ready for manufacturing or construction.

Autodesk Revit BIM 360 MEP Designer(Certified) MEP(Mechanical, Electrical & Plumbing) includes following -HVAC(Heating, Ventilation and Air conditioning)(ducting and non-ducting) -Plumbing Designing(o... Read more

Autodesk Revit BIM 360 MEP Designer(Certified) MEP(Mechanical, Electrical & Plumbing) includes following -HVAC(Heating, Ventilation and Air conditioning)(ducting and non-ducting) -Plumbing Designing(off-grid and on grid) includes Cold and Hot water piping, Sewage & Drainage System. -Firefighting includes sprinkler system, fire alarm system designing -Electrical Designing(Lighting and Power) includes High Voltage, low voltage, backup power system(Generator, UPS and Solar), wiring, panel scheduling. Complete MEP Designing with sheets, General notes, sections, elevations, schedules, annotation and floor planning. Sector covered in MEP designing; Residential, commercial, industries, complex buildings

I specialize in HVAC, electrical, and plumbing (MEP) drafting, quantity takeoffs, and Revit modeling. I prepare detailed Excel BOQs and accurate ductwork, electrical, and piping takeoffs based on cons... Read more

I specialize in HVAC, electrical, and plumbing (MEP) drafting, quantity takeoffs, and Revit modeling. I prepare detailed Excel BOQs and accurate ductwork, electrical, and piping takeoffs based on construction drawings..

I have five years of experience working in the building services industry, and during that time, I have developed expertise in designing, installing, and maintaining various building systems such as H... Read more

I have five years of experience working in the building services industry, and during that time, I have developed expertise in designing, installing, and maintaining various building systems such as HVAC systems, plumbing systems, and electrical systems. I have also worked with a variety of clients, from large corporate entities to small businesses. In addition, I have extensive knowledge of AutoCAD MEP and Revit MEP software and have used them to create detailed drawings for various projects.

CAD Operator and Draftsman with over 3 years of experience in plumbing and fire protection drafting for residential, commercial, and mixed-use construction projects. Experienced in producing accurate... Read more

CAD Operator and Draftsman with over 3 years of experience in plumbing and fire protection drafting for residential, commercial, and mixed-use construction projects. Experienced in producing accurate 2D construction drawings, shop drawings, as-built drawings, quantity take-offs (QTO), drawing revisions, and MEPF coordination using AutoCAD and AutoCAD MEP. Project experience includes high-rise residential developments, commercial buildings, office towers, and mixed-use developments throughout the Philippines. My technical background includes: • Plumbing system drafting • Fire protection system drafting • Shop drawings and construction documentation • Quantity take-offs (QTO) • Drawing coordination and clash awareness • Drafting standards and quality control • AutoCAD and AutoCAD MEP I am committed to delivering clear, organized, and construction-ready drawings while maintaining accuracy, consistency, and timely project completion. Software: • AutoCAD • AutoCAD MEP • Autodesk Revit • Microsoft Office • Google Workspace

Mechanical engineer specialising in MEP design, both 2d and 3d modelling and also drawings.

Mechanical engineer specialising in MEP design, both 2d and 3d modelling and also drawings.

I'm AutoCAD Draftsman with 6 years of experience in Swimming Pool designing and engineering Shop drawings. Expertise in drafting of Swimming Pool Plubming,mechanical, Electrical and architectural deta... Read more

I'm AutoCAD Draftsman with 6 years of experience in Swimming Pool designing and engineering Shop drawings. Expertise in drafting of Swimming Pool Plubming,mechanical, Electrical and architectural detail drawings using updated version of AutoCAD & related software.

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

Hi I'm a MEP Technician with 7 years experience in the industry. I have worked on numerous projects ranging from education, commercial, residential etc.. I have knowledge using Auto CAD, Revit & Navis... Read more

Hi I'm a MEP Technician with 7 years experience in the industry. I have worked on numerous projects ranging from education, commercial, residential etc.. I have knowledge using Auto CAD, Revit & Navisworks.

Structural analysis and design Autodesk, CSI and Bentley Programs Manual Calculation Architectural, Structural and MEP drawings for many Villas and Buildings Make Quantity Surveying for many elements... Read more

Structural analysis and design Autodesk, CSI and Bentley Programs Manual Calculation Architectural, Structural and MEP drawings for many Villas and Buildings Make Quantity Surveying for many elements Make Upvc drafts and Quotations

Hello people, I am a Mechanical Engineer and I have 6 years of experience in the field of MEP DESIGN. I specialize in HVAC, PLUMBING and FIRE PROTECTION SYSTEM. I have strong background in AutoCAD a... Read more

Hello people, I am a Mechanical Engineer and I have 6 years of experience in the field of MEP DESIGN. I specialize in HVAC, PLUMBING and FIRE PROTECTION SYSTEM. I have strong background in AutoCAD and REVIT drafting solutions. Cadpro Studio is my firm and we are working in various Residential and Commercial Building's HVAC and Plumbing drafting service. We provide communication and ideas to provide customer satisfaction and save money and time. We can also work in US, UK, CANADA and INDIAN Standards to provide better solution to customer and quality work on TIME. Working in AutoCAD and REVIT is my passion and I do it very passionately with high accuracy and quality. We can work to convert your PNG, PDF or JPEG file into CAD file with cleaning up unnecessary drawings and adding HVAC DUCT, EQUIPMENT, PLUMBING PIPING, and everything you need to do in AutoCAD. We also work on other kind of PDF TO CAD file converting and drafting of any fabrication and any Mechanical drawings. Services Offered: 1. PDF TO AUTOCAD file converting 2. MEPF CAD DRAFTING (HVAC, PLUMBING & FIRE PROTECTION) 3. Shop Drawings 4. As Built Drawings 5. MEPF Drafting

I m a diploma holder in civil engineering from board of technical education Peshawar .its register from Higher Education Commission & having more then Five years of experience in govt and private sect... Read more

I m a diploma holder in civil engineering from board of technical education Peshawar .its register from Higher Education Commission & having more then Five years of experience in govt and private sectors as a site supervisor and site engineer. following works i can do... :1. cad drawing :2. 2d and 3d drawing :3. revit and sketch up drawing 4:estimation of buildings. 5:elevations and plans

My background includes working within architectural firms and collaborating closely with engineers to develop accurate, coordinated construction documents with a strong focus on precision, deadlines,... Read more

My background includes working within architectural firms and collaborating closely with engineers to develop accurate, coordinated construction documents with a strong focus on precision, deadlines, and clear communication.

I am a licensed Electrical Engineer with over 10 years of professional experience and strong expertise in MEP design and installation. I have successfully designed and delivered numerous projects from... Read more

I am a licensed Electrical Engineer with over 10 years of professional experience and strong expertise in MEP design and installation. I have successfully designed and delivered numerous projects from concept to completion, including the Centre of Excellence (IRCE Twin Towers and Auditorium) for the International Human Virology of Nigeria (IHVN), Abuja; hotel development in Sokoto; and multiple residential developments across Abuja, Port Harcourt, Owerri, and other locations.

My experience is with the platform CAD, REVIT, Sketchup, I Design ADU, floor plans, constructions documents, Title 24 when needed obtain building permits.

My experience is with the platform CAD, REVIT, Sketchup, I Design ADU, floor plans, constructions documents, Title 24 when needed obtain building permits.

Hi, I’m Amir Latif. I’m a BIM and MEP Engineer with more than 7 years of experience in electrical systems. I design power and lighting solutions for residential, commercial, and industrial projects.... Read more

Hi, I’m Amir Latif. I’m a BIM and MEP Engineer with more than 7 years of experience in electrical systems. I design power and lighting solutions for residential, commercial, and industrial projects. I work with tools like AutoCAD, Revit, Navisworks, ETAP, AGI32, and Dialux evo, and I follow international codes and standards to make sure every project is safe, efficient, and reliable. If you need professional electrical or lighting design, I’m here to help. Let’s collaborate and bring your project to life!

Experienced MEP Design Engineer with expertise in designing efficient mechanical, electrical, and plumbing systems for residential and commercial projects. Skilled in AutoCAD.

Experienced MEP Design Engineer with expertise in designing efficient mechanical, electrical, and plumbing systems for residential and commercial projects. Skilled in AutoCAD.