Hire the best freelance Medical Device Design expert designers for your company

I've done some freelance work in the aerospace and medical fields. Both projects involved extrapolating a design into either a 3D CAD model (using SolidWorks) and even using a combination of FreeCAD a... Read more

I've done some freelance work in the aerospace and medical fields. Both projects involved extrapolating a design into either a 3D CAD model (using SolidWorks) and even using a combination of FreeCAD and Blender to create a model for applications in the dental field. I have done business on Craigslist and CGTrader.

Biomedical engineer with hands on experience in mechanical design, prototyping, and device analysis. Skilled in CAD modeling, safety evaluation of devices, and knowledge in medical device design. Ad... Read more

Biomedical engineer with hands on experience in mechanical design, prototyping, and device analysis. Skilled in CAD modeling, safety evaluation of devices, and knowledge in medical device design. Additional knowledge in Tissue Engineering

I design medical-grade PCBs for EEG, biosensor and wearable devices - from blank schematic to a validated, manufacturable board. Most of my work sits where sub-microvolt analog meets high-speed digit... Read more

I design medical-grade PCBs for EEG, biosensor and wearable devices - from blank schematic to a validated, manufacturable board. Most of my work sits where sub-microvolt analog meets high-speed digital. I have shipped 8-channel EEG acquisition hardware built around the TI ADS1299 (electrode front end, RLD/CMRR design, shielding and ground-plane strategy that protects a 1 uV signal), a next-generation health smartwatch (nRF5340, MAX86150 ECG/PPG/SpO2, BQ51003 wireless charging, ADP5360 PMIC), and a 4-layer impedance-controlled carrier board for a handheld dermatology imaging device (NXP i.MX6UL SoM, MIPI CSI/DSI, USB 2.0, LTE/Wi-Fi/GPS). What I do for clients: - Schematic capture and multi-layer PCB layout in Altium Designer and KiCad - Biosignal analog front ends: EEG, ECG, EMG, PPG, SpO2 (ADS1299, ADS1292, MAX86150, AD8232) - High-speed and mixed-signal layout: stack-up design, impedance control, signal and power integrity, EMI/EMC-aware routing - Wearable and battery-powered design: PMIC selection, fuel gauging (MAX17055), microamp sleep budgets, wireless charging - Design for manufacturing: BOM development, component sourcing, fabrication and assembly outputs, DFM review - Firmware bring-up and debug: STM32, nRF52/nRF5340, ESP32, bare-metal C/C++, SPI/I2C/BLE, JTAG and logic analyzer work Background: BS in Electrical Engineering from COMSATS University Islamabad, Altium-certified, and over two years leading PCB and embedded hardware teams at medical device companies, including design and documentation work aimed at FDA and regulatory compliance. I am comfortable owning a board end to end or dropping into an existing design for review, respins and debugging. Clear documentation, revision history and honest timelines come standard.

I am determined and energetic and active. I always try to be different and I'm the challenger of Impossible. I am a result-oriented professional who has been consistently praised as hard-working by my... Read more

I am determined and energetic and active. I always try to be different and I'm the challenger of Impossible. I am a result-oriented professional who has been consistently praised as hard-working by my co-workers and management. Over the course of my 16 years’ career, I have developed a skill set directly relevant to the principal role you are hiring for, including Research and Development (R&D), Manufacturing Processes, innovative design, 3D modeling and model simulation.

Mechanical Engineer with 4 years of professional experience in mechanical design, R&D, and technical documentation within the medical device industry. I specialize in CAD design and product developmen... Read more

Mechanical Engineer with 4 years of professional experience in mechanical design, R&D, and technical documentation within the medical device industry. I specialize in CAD design and product development, with strong expertise in SolidWorks (CSWP certified), Autodesk Inventor, and CATIA V5. I have hands-on experience working in regulated environments, ensuring compliance with IEC 60601, ISO 13485, and ISO 80601-2-12 standards. My work includes creating detailed manufacturing drawings (machining, sheet metal, welded structures), 3D models, assemblies, BOMs, and complete technical documentation for production and quality validation. During my career, I contributed to the development of ICU ventilator systems, supported cross-functional teams (Quality, Production, and Purchasing), and participated in DFMEA risk assessments. I also developed a pneumatic leakage test rig and created rapid prototypes using FDM and SLA 3D printing technologies. In my most recent role, I improved SolidWorks workflow efficiency by 80% through automation of metadata entry using a custom Property Tab Builder template. I am currently based in Egypt with strong motivation to relocate and collaborate on international engineering projects.

Innovative Mechanical Engineer with a track record of transforming concepts into market-ready products. Specializing in research, design optimization, and CAD/3D Modeling proficiency, I thrive in brin... Read more

Innovative Mechanical Engineer with a track record of transforming concepts into market-ready products. Specializing in research, design optimization, and CAD/3D Modeling proficiency, I thrive in bringing creative solutions to complex engineering challenges. My past projects have included: 1) Medical Filter for a Medical Startup Company (Sonablate) Spearheaded a project to overhaul medical filter design using CAD/3D modeling, aligning it with regulatory requirements while slashing production costs. Resulted in enhanced product quality and substantial monthly cost savings up to $100,000. 2) Pneumatic Display for an International Company (SMC) Lead the mechanical design/engineering for a pneumatic display using, meeting marketing and sales requirements while also meeting specifications. Resulted in a robust display that showcased a mock manufacturing case study at large trade shows. 3) Surgical Pen for Rutgers University Lead a project where I assisted a medical doctor working with Rutgers University to create an innovative solution to a surgical pen using 3D modeling/CAD. Took the idea from a napkin sketch concept and assisted with bringing other ideas to the project. Resulted in a prototype for the doctor to showcase to potential investors and a patent for the pen. With a proven history in mechanical design, project management, and creative problem-solving, I excel in delivering end-to-end solutions. My expertise spans medical device development, design for manufacturing, and the ability to assist with verification and validation. Clients can expect meticulous attention to detail, innovative problem-solving, and a commitment to excellence in every project undertaken. Setting myself apart in the competitive landscape, I offer: Extensive Solidworks Proficiency: Leveraging advanced CAD/3D Modeling capabilities to expedite design iterations and optimize product performance. Broad Industry Exposure: From medical devices to agricultural engineering, I possess diverse mechanical engineer skills honed across various sectors. Entrepreneurial Acumen: Experience as a business owner underscores my strategic thinking, resourcefulness, and client-centric approach. A Can-Do Attitude: I provide a can-do attitude where I look at ways to solve complex problems rather than letting complexity deter me. Ready to elevate your project to new heights? Let's collaborate to turn your vision into reality. Reach out today to discuss how I can contribute to your next product idea!

Energetic, detail-oriented, and technically proficient mechanical engineer providing skills and experience in mechanical design, 3D Solidworks modeling and drawings, technical writing in regulated ind... Read more

Energetic, detail-oriented, and technically proficient mechanical engineer providing skills and experience in mechanical design, 3D Solidworks modeling and drawings, technical writing in regulated industries, design for manufacturing and assembly, and conceptual design. Adept in mechanical design techniques, CAD modeling, and technical problem solving. Achieved successful design, testing, and verification of capital unit and consumable design from prototyping to product launch on multiple projects.

I help medical device startups and manufacturers bridge the gap between a 3D concept and a high-volume production reality. With a specialized focus on IV Cannula and Safety IV systems, I ensure your d... Read more

I help medical device startups and manufacturers bridge the gap between a 3D concept and a high-volume production reality. With a specialized focus on IV Cannula and Safety IV systems, I ensure your designs are not just functional, but optimized for the mold. Why hire me? DFM Expertise: I identify 'die-locks' and cooling issues before you spend $20k on steel. Cost Analysis: I provide data-driven breakdowns of material waste and cycle time optimization. Specialized Software: Advanced 3D modeling using PTC Creo. I prefer detailed, text-based communication to maintain a clear technical paper trail for all design specifications and engineering changes.

I am a Product Design & Development Engineer with a rich heritage from Cameroon and a strong presence in Chicago. Through my company, Njapa Engineering, I empower inventors and start-ups, offering a w... Read more

I am a Product Design & Development Engineer with a rich heritage from Cameroon and a strong presence in Chicago. Through my company, Njapa Engineering, I empower inventors and start-ups, offering a wide range of services including concept development, design for manufacture and assembly, rapid prototyping, and go-to-manufacture consulting. With a Bioengineering degree from the University of Illinois Urbana-Champaign, I specialize in creating cost-effective solutions that make groundbreaking advancements in medical devices, health and wellness products, and wearable technology accessible to people around the world. Beyond engineering, I am a musician, playing both the piano and guitar, and my creative spirit fuels my unique problem-solving approach. CAD/CAM Software - Medical Device Development- Mechatronics Design - Rapid Prototyping

Modelling assemblies, creating drawings using Solidworks and drafting the changes based on engineering design requirements & prototypes by considering DFMA. Developing Proof of concept (POC) & Prototy... Read more

Modelling assemblies, creating drawings using Solidworks and drafting the changes based on engineering design requirements & prototypes by considering DFMA. Developing Proof of concept (POC) & Prototypes. 3D printed,Documenting, Drawings creation & User Manual. Create appealing Photo realistic renders for product presentation & marketing Managing deliverables associated with several segments of Product Design & Development Coordinating with the client & fulfilling project specific needs.

Digital-Physical Systems Architect | Expert in High-Fidelity Simulation & Precision Manufacturing I provide end-to-end mechanical engineering and industrial design services with a Zero-Error Philosop... Read more

Digital-Physical Systems Architect | Expert in High-Fidelity Simulation & Precision Manufacturing I provide end-to-end mechanical engineering and industrial design services with a Zero-Error Philosophy. By acting as a "Man in the Middle" between complex data and physical execution, I ensure that every design is validated through fundamental physics before production. Technical Capabilities: Advanced Simulation: High-fidelity CFD (Computational Fluid Dynamics) and DEM (Discrete Element Method) using Altair HyperWorks. Specialized in thermal management for US Defense HVAC and abrasive wear optimization for mining equipment. Precision Execution: Expertise in 5-Axis Milling for complex geometries (Titanium/PEEK), achieving 3-micron (0.003mm) tolerances for MedTech and high-stakes industrial markets. Strategic Liaison: Proven track record handling sensitive infrastructure for the Danish Government (PET) and managing large-scale propulsion assemblies for Rolls-Royce Marine. Services Provided: Industrial Design: Complex ductwork, filtration units, and structural casings. Simulation & Validation: FEM, CFD, and particle-flow optimization to eliminate mechanical friction. Manufacturing Strategy: Manual G-code/macro-programming. I specialize in high-stakes projects where failure is not an option. Whether designing for aerospace, defense, or deep-sea maritime environments, my focus is on objective truth and engineering excellence.

Turnkey Electromechanical Engineer | 3D CAD, DFM, PCB & Embedded Systems Most hardware projects hit a predictable, expensive wall: the mechanical designer builds an enclosure without checking PCB comp... Read more

Turnkey Electromechanical Engineer | 3D CAD, DFM, PCB & Embedded Systems Most hardware projects hit a predictable, expensive wall: the mechanical designer builds an enclosure without checking PCB component heights, the EE builds a board that doesn't fit the chassis, and the firmware engineer gets handed a layout with pin conflicts. I eliminate that friction by taking your hardware project from napkin sketch to manufacturing-ready files as a single, accountable developer. When mechanical CAD, electronics layout, and embedded code are engineered together in lockstep, you eliminate redesign loops, save months of prototyping time, and drastically lower your development costs. What I Deliver 3D Mechanical CAD & Enclosures: Custom housings, internal snap-fits, mounting bosses, structural ribbing, and functional mechanisms engineered with real-world clearances. Design for Manufacturing (DFM): Production-ready models built specifically for plastic injection molding (draft angles, uniform wall thickness), sheet metal fabrication, CNC machining, or high-volume 3D printing. PCB Layout & Hardware Integration: Custom multi-layer board designs (KiCad / Altium), schematic capture, and tight microcontroller integration (ESP32, RP2040, STM32, Nordic) built directly into the 3D enclosure bounds. Embedded Firmware: Clean, reliable C/C++ code to run your actuators, sensors, displays, power management, and IoT connectivity. BOM & Supply Chain Optimization: Active component selection during the design phase to protect your product from lead-time spikes and inflated unit costs. How We Build Your Product Architecture & Scope: We map out mechanical dimensions, target manufacturing methods, power budgets, and target BOM cost. Parallel Design Phase: I model the 3D chassis and lay out the PCB concurrently. Zero fitment surprises, zero wasted space. Turnkey File Handoff: You receive factory-ready STEP/STL files, production drawings, Gerber/BOM manufacturing packages, and validated firmware binaries. Why Work With Me? You don't need a bloated agency or three different freelancers who don't talk to each other. You get a single engineering partner who understands how physical plastic, copper traces, and microcontroller code interact in a finished product. Whether you are preparing a Kickstarter prototype, building an industrial IoT device, or refining a custom electro-mechanical device for production, let's build it right the first time. Drop me a message with your project concept or CAD files, and let's get to work.

I help startups and manufacturers turn product ideas into real, production-ready products. I’m an Industrial Designer and Product Development Consultant with experience across concept development, 3D... Read more

I help startups and manufacturers turn product ideas into real, production-ready products. I’m an Industrial Designer and Product Development Consultant with experience across concept development, 3D CAD, mechanical/product design, DFM/DFA, prototyping, and manufacturing. My approach combines creative product thinking with engineering and manufacturing realities — so the goal is not just a good-looking model, but a product that can actually be built, tested, refined, and produced. I work closely with clients throughout the process to make sure requirements, design intent, technical constraints, and manufacturing considerations are aligned from the beginning. From concept sketches to manufacturing-ready CAD, I can support the complete product development journey.

Rogelio Castilla Mechanical Design Specialist | Founder of Innovavision Solutions I’m a mechanical design engineer with a proven track record in medical devices, fluid systems, and industrial hardwar... Read more

Rogelio Castilla Mechanical Design Specialist | Founder of Innovavision Solutions I’m a mechanical design engineer with a proven track record in medical devices, fluid systems, and industrial hardware—combining hands-on prototyping expertise with rigorous analytical skills to deliver functional, manufacturable, and compliant designs. My work spans: Core Design Competencies ✔ Medical Devices: Implantable bioelectronics, microfluidic systems (e.g., sweat sensors, lab-on-a-chip), and surgical tools. ✔ Fluid & Mechanical Systems: Pumps, valves, pistons, and actuators—optimized for performance, durability, and cost-efficiency. ✔ End-to-End Development: From concept to MVP, leveraging 3D printing (SLA/FDM), CFD/FEA (COMSOL), and DFM principles to slash prototyping costs by 70%+. Why Work With Me? ✅ Industry-Blending Expertise: Unique background in biomedical + mechanical engineering—ideal for cutting-edge medical or cross-disciplinary projects. ✅ Regulatory-Savvy Designs: Intimate knowledge of FDA 21 CFR 820 & ISO 13485 ensures compliance is baked into your product from Day 1. ✅ Simulation-Driven Approach: Use of computational software such as OpenFOAM, Python, and SolidWorks Simulation to predict and resolve failures before prototyping. ✅ Startup to Enterprise Scale: Founded Innovavision Solutions to deliver agile, client-focused solutions—no bureaucratic delays. Let’s Build Something Exceptional! I partner with clients who value precision, innovation, and speed. Whether you’re developing a minimal viable product, refining industrial hardware, or solving complex modeling challenges—I’ll deliver designs and that work, not just CAD files. Tools I Use Daily: SolidWorks, Autodesk (Fusion 360, Inventor), OpenFOAM, Python, SLA/FDM 3D Printing. Contact me: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ (281) 690-2954 innovavisionsolutions .com https://www.linkedin.com/in/ rogeliocastillame/

Results-driven Mechanical and Systems Engineering professional with over two decades of experience in medical device development, I bring a strong track record of leading innovative product design, pr... Read more

Results-driven Mechanical and Systems Engineering professional with over two decades of experience in medical device development, I bring a strong track record of leading innovative product design, prototyping, and manufacturing initiatives from concept through commercialization. Throughout my career, I have contributed to the successful development of complex medical devices, including neurovascular implants, catheter systems, and delivery technologies. In my current consulting roles with TI Medtech and JP Design Solutions, I serve as a lead R\&D engineer, driving early-stage product development, identifying critical design risks, and collaborating cross-functionally to ensure solutions meet both customer needs and regulatory requirements. I have also supported renowned organizations such as Edwards Lifesciences, Inari Medical, and the National University of Singapore. My background includes extensive hands-on experience in design engineering, GD\&T, tooling and fixturing, test method development, and process optimization. I have a strong foundation in both R\&D and manufacturing environments, allowing me to effectively bridge the gap between innovation and production while improving yield, reducing costs, and accelerating time to market

A Biomedical Engineering Graduate and Freelance 3D CAD Designer with an expertise in , Medical Device Design, Medical Simulation and Optimization.

A Biomedical Engineering Graduate and Freelance 3D CAD Designer with an expertise in , Medical Device Design, Medical Simulation and Optimization.

Industrial designer with 10+ years of product development experience working at HP, Honeywell, SleepNumber, Fluke, and Consulting Design/Engineering agencies. I specialize in med-device and bring exp... Read more

Industrial designer with 10+ years of product development experience working at HP, Honeywell, SleepNumber, Fluke, and Consulting Design/Engineering agencies. I specialize in med-device and bring experience delivering for FDA submissions, formative review and design validation in ISO 13485 QMS

I am a biomedical engineer and Team Lead at ITO Biomedical Lab, specializing in patient-specific medical solutions for orthopedics, trauma, and reconstructive surgery. Our team provides a complete me... Read more

I am a biomedical engineer and Team Lead at ITO Biomedical Lab, specializing in patient-specific medical solutions for orthopedics, trauma, and reconstructive surgery. Our team provides a complete medical CAD workflow — from CT/DICOM segmentation and anatomical reconstruction to the design of patient-specific implants, surgical guides, anatomical models, and solutions prepared for additive manufacturing. Our expertise includes: • CT/DICOM segmentation and 3D reconstruction • Anatomical 3D models • Patient-specific orthopedic implant design • Custom hip and acetabular implants • Custom implants for bone defect reconstruction • Maxillofacial implants • Patient-specific oncological implants • Finger and small-joint implants • Surgical guides and navigation templates • Design for metal additive manufacturing • Medical and biomedical CAD More than 300 patient-specific implants designed and manufactured by our team have been successfully used in surgical treatment. We have also created more than 1,000 anatomical models for surgical planning, education, research, and clinical applications. Our experience includes complex and challenging cases involving severe combat-related trauma, extensive bone defects, complex pelvic and acetabular injuries, and major reconstructive procedures. We work directly with orthopedic and trauma surgeons to develop accurate, clinically relevant, and manufacturable solutions for demanding cases. We focus on anatomical accuracy, manufacturability, surgeon requirements, and practical solutions for complex clinical challenges. Available for international collaboration with surgeons, clinics, medical device companies, research teams, and engineering partners.

- Skilled in CAD design, particularly SolidWorks - Can build 3D models and drawings for a variety of manufacturing methods such as CNC, 3D printing, sheet metal fabrication, and injection molding - De... Read more

- Skilled in CAD design, particularly SolidWorks - Can build 3D models and drawings for a variety of manufacturing methods such as CNC, 3D printing, sheet metal fabrication, and injection molding - Detailed oriented

As a Sr. Design Engineer with a passion for creating innovative medical devices, I am committed to developing solutions that improve patient outcomes and advance healthcare. With over 6 years of exper... Read more

As a Sr. Design Engineer with a passion for creating innovative medical devices, I am committed to developing solutions that improve patient outcomes and advance healthcare. With over 6 years of experience, I currently work at Medical device OEM company, a global leader in single-use technology solutions for the life sciences industry. Here, I leverage my expertise in SolidWorks, AutoCAD, ECN management, cost analysis, and process validation to deliver high-quality, cost-effective designs that meet the stringent standards of the medical device industry. Previously, I worked at Aerospace industry, honing my skills in precision engineering and quality assurance within the aerospace industry, which provided me with a strong foundation in design principles and quality control applicable across various engineering fields. With certifications like CSWA and CSWPA-SMT, I bring technical expertise in sheet metal design and manufacturability. I am also well-versed in key engineering methodologies such as DFMEA and DFMA, ensuring that designs are both efficient and compliant with industry standards like ISO 13485. I am eager to take on leadership roles, driving cross-functional teams in delivering complex design solutions. My goal is to contribute to the development of cutting-edge medical devices that positively impact patient care and support the continuous improvement of healthcare solutions. Key Areas of Expertise: -Design for Manufacturability (DFM) & Design for Assembly (DFA) -SolidWorks (Sheet Metal & Weldments) -Product Development & Engineering Leadership -Regulatory Compliance (ISO 13485, USP, WHO) -ECN Management & Process Validation -Cost Analysis & Optimization -DFMEA & DFMA

Experienced Regulatory Affairs Consultant with a demonstrated history of working in Medical devices, Drugs, Biologics, and Combination products. Skilled in Regulatory Affairs, Quality Assurance, Clini... Read more

Experienced Regulatory Affairs Consultant with a demonstrated history of working in Medical devices, Drugs, Biologics, and Combination products. Skilled in Regulatory Affairs, Quality Assurance, Clinical trials, New Drug Application (NDA), Investigational Drug Application (IND), Risk Assessment, Biologic License Application (BLA), and Consulting.