Hire the best freelance ANSYS ICEM-CFD expert designers for your company

M.Eng. in Mechanical Engineering candidate at Beijing Institute of Technology, specializing in active vibration control and multiphysics propulsion. With a strong foundation in aerospace engineering,... Read more

M.Eng. in Mechanical Engineering candidate at Beijing Institute of Technology, specializing in active vibration control and multiphysics propulsion. With a strong foundation in aerospace engineering, I excel in transforming complex problems into innovative solutions through Sketch-To-CAD design. An analytical problem-solver with experimental and programming expertise. Passionate about sketching/drawing and proficient in Solidworks/FreeCAD (2D/3D modeling). I can turn ideas into concrete product. Accomplishments and Projects : - Contributor to NeboEYE-1, a lunar water detection project selected for the 11th China Graduate Future Flight Vehicle Innovation Competition (2025). - Designed and validated a 6-DoF Active Vibration Isolation System (AVIS) controller, earning 3rd prize at the 3rd IS-Academic Forum for Outstanding International Students at USTB (2025). - Conducted numerical simulations of laser ignition for hybrid rocket propulsion using ANSYS Fluent, focusing on slab burners (2023). - Developed a data acquisition system for dynamic testing of Senegalese Air Force helicopters Mi17/Mi35 using Python and Arduino (2021)

Technoledge focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget re... Read more

Technoledge focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget requirements; along with maintaining the highest standards of operation throughout all project areas from start to finish. At Technoledge, we aim to achieve our vision by placing emphasis on ensuring that our offerings meet the following criteria; Agility, On time Delivery, Superior Quality, Cost Effectiveness and Great Efficiency. A continuous learning culture amongst the team enables and guarantees continuous innovation in the business.

I am an aerospace and design enthusiast. I have good command in Solidworks, CATIA, Hypermesh, MSc Nastran, ANSYS CFD, and ICEM CFD. I am good at hand-calculations of static structures and validate the... Read more

I am an aerospace and design enthusiast. I have good command in Solidworks, CATIA, Hypermesh, MSc Nastran, ANSYS CFD, and ICEM CFD. I am good at hand-calculations of static structures and validate the same results using FEA software.

Master mechanical engineer with passion about design and manufacturing, able to design and to perform FEA and CFD analysis with appropriate Technical drawings up to standards to meet DFMA specificati... Read more

Master mechanical engineer with passion about design and manufacturing, able to design and to perform FEA and CFD analysis with appropriate Technical drawings up to standards to meet DFMA specifications.

My name is Pritam Rajendra Sonawane. I am a Mechanical Engineer from Pune University. I have done courses in 3D CAD modelling and analysis from College of Engineering Pune. I have disigned several pro... Read more

My name is Pritam Rajendra Sonawane. I am a Mechanical Engineer from Pune University. I have done courses in 3D CAD modelling and analysis from College of Engineering Pune. I have disigned several project on automated systems such as automated reverse breaking system, automatic hand break release, multi tool machine, automatic hill station breaking system, automatic pneumatic bumper, pneumatic sheet cutting machine, multiple hacksaw, magnetic power transmission, chainless bicycle,etc.

I have 5year+ experience in CAD/CAM engineering and industrial robotics. My specializations are mechanisms, moving parts, sheet metal, and chassis design.

I have 5year+ experience in CAD/CAM engineering and industrial robotics. My specializations are mechanisms, moving parts, sheet metal, and chassis design.

I have been working in mechanical cad software's from past 3 years in industry . I teach 3D modeling ,assembly ,drafting ,sheet metal and surface design and i also work on CFD,CAE And CAD projects .I... Read more

I have been working in mechanical cad software's from past 3 years in industry . I teach 3D modeling ,assembly ,drafting ,sheet metal and surface design and i also work on CFD,CAE And CAD projects .I have done many projects using solidworks,Catia,Nx Cad,Autocad and Ansys.

Experienced Mechanical Engineer specialized in Building Services Engineering with a demonstrated history of working in the design of HVAC, Fire Protection, and Plumbing systems for different Building... Read more

Experienced Mechanical Engineer specialized in Building Services Engineering with a demonstrated history of working in the design of HVAC, Fire Protection, and Plumbing systems for different Building and Construction projects in multiple countries. Highly skilled in Revit MEP, AutoCAD, ANSYS Fluent, and Computational Fluid Dynamics (CFD). Strong professional with Master of Science (M.Sc.), from Cairo University, focused in CFD Analysis of Thermal Comfort in Outdoor Spaces Using Passive Air Conditioning Techniques.

I'm a mechanical engineer with knowlegde in CAD and simulation.

I'm a mechanical engineer with knowlegde in CAD and simulation.

As an experienced aerodynamicist with a Master's in CFD and a Bachelor's in Mechanical Engineering, I specialize in automotive design and analysis. I have led the aerodynamics team for a Formula Stude... Read more

As an experienced aerodynamicist with a Master's in CFD and a Bachelor's in Mechanical Engineering, I specialize in automotive design and analysis. I have led the aerodynamics team for a Formula Student project, where I designed and optimized vehicle components using advanced CFD tools. With a strong background in both practical engineering and computational analysis, I deliver efficient and innovative solutions that enhance performance and design quality.

Greeting to connect to you! My name is Nam Vu - A member of BOD Oil/Gas Engineering & HSE group from Vietnam Now, Looking for opportunities to work with you in suitable jobs as FREELANCER or Remo... Read more

Greeting to connect to you! My name is Nam Vu - A member of BOD Oil/Gas Engineering & HSE group from Vietnam Now, Looking for opportunities to work with you in suitable jobs as FREELANCER or Remoted Support (Becoming your trustly outsourcing) in following sections: + Engineering: FS/FEED/DD/As built project (Design/Drawing/Calculation/Optimization) + Consulting: HSE services + Training: Oil/ gas/ power plant engineering software + Simulation: CFD If you are interested in any above sectors. Please let me know. Thanks & Regards, Nam Vu

I am Mechanical Engineer. I did many projects such as building snake robot, simulation of the wind turbine, simulation of the journal bearing and so on. I can design and model any things by CATIA and... Read more

I am Mechanical Engineer. I did many projects such as building snake robot, simulation of the wind turbine, simulation of the journal bearing and so on. I can design and model any things by CATIA and SolidWorks. We can have a good collaboration and build the world! Please contact me. Best

An accomplished aerospace engineer excelling in stress analysis, design assessments, structural evaluations, and problem-solving, backed by extensive experience in understanding and evaluating enginee... Read more

An accomplished aerospace engineer excelling in stress analysis, design assessments, structural evaluations, and problem-solving, backed by extensive experience in understanding and evaluating engineering challenges. Skillfully blends traditional expertise with modern technology, enhanced by finely tuned communication skills honed through effective interactions at all levels. Now pursuing a challenging engineering role where 29 years of experience can significantly advance corporate objectives.

I perform conversions from 2D to 3D, Mechanical cell design for assembly of automotive parts, Finite Element Analysis of structures in static mode, Modeling of mechanical parts for 3D printing. I have... Read more

I perform conversions from 2D to 3D, Mechanical cell design for assembly of automotive parts, Finite Element Analysis of structures in static mode, Modeling of mechanical parts for 3D printing. I have worked as a Mechanical Designer, taken a GD&T course; preferably I handle CAD software such as SolidWorks and Inventor; for finite element analysis I mainly use SolidWorks and ANSYS. I received my degree in Mechatronics Engineering, and I have completed a Master of Science and Technology in Design and Development of Mechanical Systems. I like the 3D environment, from modeling and rendering parts to designing tooling or machines for masive production.

My expertise lies in Fluid Dynamics, heat transfer, and CFD modelling. (FSI, Fluid-induced vibration (FIV), Particulate flow, CHT, Turbulent Flow (DDES, LES, RANS/URANS)) (LBM-DEM)

My expertise lies in Fluid Dynamics, heat transfer, and CFD modelling. (FSI, Fluid-induced vibration (FIV), Particulate flow, CHT, Turbulent Flow (DDES, LES, RANS/URANS)) (LBM-DEM)

I have a mechanical engineering training with a specialty in fluid modeling and simulation. My master thesis was about studying the Aerothermodynamics effects of a capsule in terrestrial reentry condi... Read more

I have a mechanical engineering training with a specialty in fluid modeling and simulation. My master thesis was about studying the Aerothermodynamics effects of a capsule in terrestrial reentry conditions, coupled with radiation and ablation. Results were compared to expansion tunnel experimental data.

Technical Introduction: Mechanical Design Expertise Hello, I’m D Hemanth Dayalu, a Mechanical Design Engineer with comprehensive experience in mechanical systems design, product development, and AI in... Read more

Technical Introduction: Mechanical Design Expertise Hello, I’m D Hemanth Dayalu, a Mechanical Design Engineer with comprehensive experience in mechanical systems design, product development, and AI integration. Below is a brief overview highlighting my expertise and technical competencies: Professional Summary I have led and contributed to numerous projects across the fields of robotics, autonomous systems, aerospace, defense, and consumer products. My experience spans from conceptual design to manufacturing and deployment, blending traditional engineering with advanced technologies. Core Technical Skills • Mechanical System Design: Specialized in designing complex systems, including autonomous camera platforms and sensor-integrated devices. • CAD & Simulation Tools: • 3D Modeling: Expert in SOLIDWORKS, CATIA, and SOLIDEDGE for parametric and surface modeling. • Simulation & Analysis: Proficient in ANSYS, FEA (Finite Element Analysis), and FMEA (Failure Modes and Effects Analysis) for robust design validation. • Product Development & Prototyping: • Led end-to-end product development cycles (R&D to production). • Skilled in rapid prototyping, 3D printing, and sheet metal fabrication. • Extensive experience with CNC machining and plastics injection molding. • AI Integration: Engineered AI-enabled components for edge computing, sensor fusion, and real-time surveillance systems. • Project Management: Managed cross-functional engineering teams and projects, delivering innovative products to diverse industries. • Manufacturing Techniques: Hands-on expertise in CNC milling, sheet metal operations, and reverse engineering. Key Projects • Autonomous Camera Systems: Designed and developed integrated visible camera systems with advanced sensors (IR, GPS, alcohol & gas detection), AI compute modules, and robust IP-rated enclosures. • Product Development for Aerospace & Defense: Managed the creation and installation of advanced prototypes, utilizing rapid prototyping and reverse engineering methods. • Robotics & IoT Solutions: Developed robotics kits and IoT-enabled devices, encompassing both hardware and software integration.

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company... Read more

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company is called Faithful Engineering, LLC. I served as a Vice President of Engineering for 20 of my 33 years in the product manufacturing industry, so there are very few engineering functions that I have not had some experience with. Let me show you what a difference that can make!

I am proficient in Solidworks, CATIA, CREO and Autocad. I have also worked on some FEA projects and have the knowledge of ABAQUS.

I am proficient in Solidworks, CATIA, CREO and Autocad. I have also worked on some FEA projects and have the knowledge of ABAQUS.

Hello! My name is Henrique Pope Guerra, I am a Mechanical Engineer with 12 years experience on Computational Fluid Dynamics simulations and Computer Aided Design softwares. My goal is to always under... Read more

Hello! My name is Henrique Pope Guerra, I am a Mechanical Engineer with 12 years experience on Computational Fluid Dynamics simulations and Computer Aided Design softwares. My goal is to always understand the clients needs through good and clear communication, in order to deliver a consistent job. I believe I have the skill and experience necessaries to achieve useful results respecting the project timeline and the resources available.

I am Mechanical Engineer specialist in energy, with knowledge in Ansys CFD, AutoCAD and Autodesk Inventor. I worked in laboratory Fresenius Kabi, making CAD plans of the utilities and analyzing the... Read more

I am Mechanical Engineer specialist in energy, with knowledge in Ansys CFD, AutoCAD and Autodesk Inventor. I worked in laboratory Fresenius Kabi, making CAD plans of the utilities and analyzing the head loss in pipes of distilled water. My thesis project was an aerodynamic improvement of a solar car using Ansys CFD. The new design of this car was made in Autodesk Inventor.

I have worked with software such as Aoutocad and Solidwors and even Ansysworkbench for fluid simulations. And I'm very interested in aerospace and I need to be trusted to work.

I have worked with software such as Aoutocad and Solidwors and even Ansysworkbench for fluid simulations. And I'm very interested in aerospace and I need to be trusted to work.

I'm interested in 3D CAD, FEA analysis and CFD modeling and analysis works. My strengths are mostly in my focused areas such as FEA of product designs, design recommendations and CFD modeling in Ansy... Read more

I'm interested in 3D CAD, FEA analysis and CFD modeling and analysis works. My strengths are mostly in my focused areas such as FEA of product designs, design recommendations and CFD modeling in Ansys fluent, and static structural Analysis in ansys mechanical. Some of my keyworks are related in CAD modeling in heavy equipment designs such as JCB cranes, mining buckets and as well transient analysis of noise generation in compressor blades in Ansys fluent.

I'm a tech entrepreneur and skilled professional with bachelor's in aerospace and master's in mechatronics. I have a hands on experience in CAD designing, FEA and CFD analysis tools. i have good exper... Read more

I'm a tech entrepreneur and skilled professional with bachelor's in aerospace and master's in mechatronics. I have a hands on experience in CAD designing, FEA and CFD analysis tools. i have good experience in unmanned aerial vehicle design and development. done various projects on UAVs, UGVs and autonomous Underwater vehicles (AUVs). i have a good design skills and 3d part design, assembly and drafting with basic knowledge of GD&T.

We are a talented Mechanical Engineers and Archtitures with+7 years experience - Our mission is to provide unique products that will satisfy my customers' needs. -(Respect, Integrity, Transparency, St... Read more

We are a talented Mechanical Engineers and Archtitures with+7 years experience - Our mission is to provide unique products that will satisfy my customers' needs. -(Respect, Integrity, Transparency, Standards, and Improvement) are my way to guarantee efficient work ______ *SERVICES* "Mechanical field " -Product design from concept to the final product. - Research and development (R&D) -3D modeling. -Preparing calculation sheets. -Rendering high-quality images and short videos animation. -Design and layout drawings in 2D and 3D views and format. -Preparing workshop drawings for fabrication. -Prepare B.O.Q and optimizing for minimum material use (Nesting). -Optimizing project/product parameters according to available resources (Parametric optimization). -Product manufacturing and prototyping. -Pressure vessel design using ASME SEC. VIII Div.1 "Architecture field" BIM Tools Revit, AutoCAD 3DS Max, Modelling, rendering and animation Microsoft project, primavera Portfolio Items Manage

• Profound knowledge of Thermal management of system design and efficiency improvement of air conditioning equipment, Evaporators, Condenser, Turbo machinery components like Compressors and blowers. P... Read more

• Profound knowledge of Thermal management of system design and efficiency improvement of air conditioning equipment, Evaporators, Condenser, Turbo machinery components like Compressors and blowers. Proficient in performing CFD analysis and obtaining optimized design of components such as centrifugal compressor, axial blowers, Generator, Heating ventilation and air-conditioning units. • Complete product life cycle management, optimization of system design and efficiency improvement of Refrigeration and air-conditioning compressors like Reciprocating, Rotary and scroll. The life cycle involves the start from basic design calculation of compressor to releasing efficient and cost effective design. • Accomplished various projects in the structural analysis involving linear and non-linear models, static and Dynamic analysis, computing the motion and effect of large number of small particles by DEM, viscous damping models for elastomers, material modelling characterization, Shear failure and contact pressure analysis.

Extensive experience in CAD/CAM and Engineering Simulations including FEA/CFD and Fluid Structure interactions with specific experience in biomedical engineering applications such as cardiac system si... Read more

Extensive experience in CAD/CAM and Engineering Simulations including FEA/CFD and Fluid Structure interactions with specific experience in biomedical engineering applications such as cardiac system simulations and design of patient specific artificial heart valves