Hire the best freelance Fire Fighting Systems expert designers for your company

BimxCad is a premier BIM and MEP design engineering firm specializing in high-accuracy drafting, 3D modeling, and comprehensive Building Information Modeling (BIM) solutions. Powered by a team of dedi... Read more

BimxCad is a premier BIM and MEP design engineering firm specializing in high-accuracy drafting, 3D modeling, and comprehensive Building Information Modeling (BIM) solutions. Powered by a team of dedicated specialists and advanced engineering software—including Revit MEP, AutoCAD MEP, and SketchUp—we transform complex mechanical, electrical, plumbing, and fire protection engineering concepts into precise, actionable digital assets. ​Our expertise spans across residential, commercial, and industrial sectors, delivering scalable solutions that streamline construction workflows, eliminate on-site coordination conflicts, and optimize lifecycle management for modern infrastructure. Core Capabilities • MEPF Design Engineering Solutions • Comprehensive BIM Solutions • ​Precision Drafting & Documentation: • ​Advanced 3D Modeling & Visualization: • Facility management (Cobie) • As-built Support Our Commitments & Core Values • Uncompromising Quality • ​Clear & Transparent Communication • ​On-Time Delivery The BimxCad Advantage ◦ ​Precision ◦ Coordination ◦ Efficiency.

🏗️ AutoCAD & Revit Designer | MEP Drafting | Redlines, As-Builts, Shop Drawings Need a designer who can also execute perfectly detailed drawings? I help homeowners, contractors, and developers with... Read more

🏗️ AutoCAD & Revit Designer | MEP Drafting | Redlines, As-Builts, Shop Drawings Need a designer who can also execute perfectly detailed drawings? I help homeowners, contractors, and developers with both design and drafting, delivering functional layouts AND construction-ready drawings without errors or delays. With 10 years of experience, I specialize in: ✔ Space planning & layout design ✔ MEP drafting ✔ Redline markups & as-built updates ✔ Shop drawings & permit-ready documentation I don’t just design, I make sure everything is practical, buildable, and code-compliant. 🔹 My Services 💡 What I Can Do For You 🔹 MEP Design & Drafting ✔ HVAC system design & load calculations ✔ Electrical layout, panel schedules & SLD ✔ Plumbing & drainage system design ✔ Fire protection / sprinkler system layouts 🔹 Redlines, Revisions & Drawing Fixes ✔ PDF markups → clean AutoCAD drawings ✔ DWG edits & plan modifications ✔ Small changes to existing floor plans ✔ As-built drawing corrections ✔ Fast turnaround revisions 🔹 Shop Drawings & Detailed Documentation ✔ HVAC, Electrical & Plumbing shop drawings ✔ Coordination drawings (clash-aware) ✔ Construction-ready documentation 🔹 CAD Conversion & 2D Drafting ✔ PDF / Image → AutoCAD conversion ✔ 2D drafting & detailing ✔ Clean, layered, fully editable DWG files ⭐ Why Clients Choose Me ✔ 10 years of MEP experience ✔ Strong balance of design thinking + technical execution ✔ Fast turnaround (urgent revisions welcome) ✔ High accuracy & attention to detail ✔ Clean, organized, fully editable CAD files ✔ Experience with US & international standards ✔ Reduced site errors through coordinated drawings I am especially experienced in handling quick revisions, redline corrections, and updates to existing construction drawings, helping clients make fast and accurate changes without delays. I understand that in construction, accuracy saves time and money. My goal is to deliver coordinated, clash-aware, and technically sound drawings that make execution smooth on site. Whether you need a small drafting task or complete MEP drawing support for your project, I’m ready to help. 📩 Send me a message — let’s discuss your project and get started.

I am an enthusiastic MEP modeller with skills in AutoCAD drafting, Revit MEP modelling, and Navisworks clash detection. I specialize in creating accurate mechanical, electrical, and plumbing layouts w... Read more

I am an enthusiastic MEP modeller with skills in AutoCAD drafting, Revit MEP modelling, and Navisworks clash detection. I specialize in creating accurate mechanical, electrical, and plumbing layouts while ensuring compliance with industry standards and project-specific units. My focus is on delivering coordinated BIM models that reduce conflicts and improve project efficiency.

I am a Mechanical Engineer specialized in HVAC, Plumbing, and Firefighting system design with strong experience in AutoCAD drafting and shop drawings. I help consultants, contractors, and design offic... Read more

I am a Mechanical Engineer specialized in HVAC, Plumbing, and Firefighting system design with strong experience in AutoCAD drafting and shop drawings. I help consultants, contractors, and design offices deliver accurate and professional CAD drawings, including: HVAC system layouts and ducting HAP load calculation ventilation systems for hoods Plumbing and drainage systems Firefighting systems (NFPA standards) Conversion of sketches/PDFs into detailed CAD drawings ✅ Fast delivery ✅ Clear technical drawings ✅ Coordination with architectural/structural plans

MEP Engineer | Skilled in HVAC, Electrical & Plumbing Systems|Skilled MEP Engineer with hands-on understanding of HVAC, electrical distribution, plumbing layouts, and fire-fighting systems, focused on... Read more

MEP Engineer | Skilled in HVAC, Electrical & Plumbing Systems|Skilled MEP Engineer with hands-on understanding of HVAC, electrical distribution, plumbing layouts, and fire-fighting systems, focused on ensuring quality, safety, and smooth project exec

Mechanical Design Engineer with 3 years of experience in MEP Design, Fire Fighting Systems, CCTV, and ELV Systems for commercial, healthcare, infrastructure, and institutional projects. Skilled in pre... Read more

Mechanical Design Engineer with 3 years of experience in MEP Design, Fire Fighting Systems, CCTV, and ELV Systems for commercial, healthcare, infrastructure, and institutional projects. Skilled in preparing detailed shop drawings, coordination drawings, and design layouts using AutoCAD and industry standards. Experienced in Fire Fighting Services including hydrant systems, sprinkler systems, pump room layouts, shaft coordination, and pipe routing with detailed measurements and sizing. Knowledgeable in NFPA standards, fire alarm coordination, and safety system layouts for hospitals and industrial projects. Worked on CCTV and ELV Systems such as Public Address (PA) Systems, Fire Alarm Systems, CCTV Surveillance, Access Control, and structured cabling layouts. Capable of coordinating with architectural, structural, and MEP disciplines to ensure accurate execution drawings and site coordination. Proficient in preparing coordinated shop drawings, equipment layouts, sleeve drawings, support details, and BOQ-related documentation for various building services projects. Strong understanding of site execution requirements, drawing coordination, and technical documentation. Software Skills: AutoCAD MS Office Basic Revit MEP PDF & Drawing Coordination Tools Core Expertise: MEP Shop Drawings Fire Fighting Systems Fire Alarm Systems CCTV & Surveillance Systems ELV & PA Systems Coordination Drawings Pipe Routing & Sizing Technical Documentation Site Coordination

I'm a Mechanical Engineering student specializing in HVAC and MEP design, with hands-on experience delivering complete building services projects. I have designed HVAC, plumbing, and fire fighting sys... Read more

I'm a Mechanical Engineering student specializing in HVAC and MEP design, with hands-on experience delivering complete building services projects. I have designed HVAC, plumbing, and fire fighting systems for residential and commercial buildings, handling projects from engineering calculations through final layouts and documentation. My technical skills include HVAC load calculations using HAP, duct and piping design, equipment selection, Revit MEP, AutoCAD, and the preparation of coordinated MEP drawings. I am committed to producing accurate, practical, and code-compliant designs while maintaining clear communication and meeting project deadlines. Whether you need HVAC design, plumbing systems, fire fighting layouts, Revit MEP modeling, or support with MEP documentation, I am dedicated to providing high-quality engineering solutions tailored to your project's requirements. Core Skills Microsoft Office (Word, Excel and PowerPoint) HVAC Design & Load Calculations (HAP) Plumbing System Design Fire Fighting System Design Revit MEP AutoCAD MEP Coordination Equipment Selection

I am an experienced MEP Building Services Design Engineer providing freelance design and drafting services for residential, commercial, hospitality, healthcare, and industrial projects. My expertise c... Read more

I am an experienced MEP Building Services Design Engineer providing freelance design and drafting services for residential, commercial, hospitality, healthcare, and industrial projects. My expertise covers the complete lifecycle of MEP design—from concept development to detailed construction drawings and authority submissions. Core Expertise: HVAC system design, heat load calculations, ventilation & smoke extraction Electrical power distribution, lighting design, earthing & lightning protection Plumbing, drainage, water supply & pump sizing Fire-fighting systems (sprinkler, hydrant, hose reel) MEP coordination with architectural and structural disciplines I am proficient in AutoCAD, Revit MEP, and engineering calculation software, delivering accurate layouts, schematics, and schedules. My designs comply with international codes such as ASHRAE, NFPA, NEC, BS, and IPC, as well as local authority regulations. I am committed to energy-efficient, sustainable, and buildable MEP solutions, ensuring quality, safety, and performance in every project.

I am a Mechanical Design and Plant Engineering professional specializing in industrial plant design, piping layout, and 3D plant modelling. I have hands-on experience with AutoCAD Plant 3D, P&ID devel... Read more

I am a Mechanical Design and Plant Engineering professional specializing in industrial plant design, piping layout, and 3D plant modelling. I have hands-on experience with AutoCAD Plant 3D, P&ID development, equipment layout, piping design, utility systems, and engineering documentation. My expertise includes developing 2D/3D plant layouts, converting P&IDs into intelligent 3D models, routing process and utility piping, preparing piping isometrics, equipment arrangements, and supporting technical evaluations for pumps, heat exchangers, chillers, cooling towers, and other plant equipment. I have worked on industrial projects involving graphene, anode manufacturing, ETP/STP systems, cooling water circuits, fire-fighting systems, compressed air, DM water, and other plant utilities. I focus on producing accurate, practical, and fabrication-ready engineering deliverables while maintaining coordination between process, mechanical, piping, equipment, and civil requirements. Key Skills: AutoCAD Plant 3D | P&ID | PFD | Piping Design | 3D Plant Modelling | Equipment Layout | Piping Isometrics | Utility Piping | Plant Layout | Mechanical Design | Engineering Documentation | Technical Vendor Evaluation I am available for freelance and project-based work involving plant design, piping design, CAD modelling, P&ID development, and industrial engineering support.

The design of the HVAC system, plumbing water supply and drainage system, fire fighting system, medical gas system includes cooling and heating load calculations, ventilation calculations, smoke manag... Read more

The design of the HVAC system, plumbing water supply and drainage system, fire fighting system, medical gas system includes cooling and heating load calculations, ventilation calculations, smoke management systems, ductworks, pumps (transfer pump, booster pump, sump pump), underground and overhead water tank calculations, septic tank calculations, neutralization tank calculations, water supply fixture unit calculations, pipe size calculation, pipe material selection, oxygen cylinder, medical vacuum pump, medical air, Entonox gas, Nitrous oxide, medical gas pipe sizing.

I am the director of my own fire protection consultancy in Australia, called PCS Consulting, with over 12 years of experience in fire protection, from on site installation through to consulting and co... Read more

I am the director of my own fire protection consultancy in Australia, called PCS Consulting, with over 12 years of experience in fire protection, from on site installation through to consulting and commissioning. We specialize in Wet & Dry Fire including; Fire Sprinkler Systems, Fire Hydrant and Hose Reel Systems, Combined Hydrant and Sprinkler Systems, Fire Detection and Alarm Systems Emergency Warning and Intercommunication Systems, Gaseous Suppression Systems, Peer Review services, Value Management services and Expert Witnessing. I have worked on all types of projects from fit-outs to tunnels, ranging from construction values of Less than AU$1 Million to AU$30Billion. Whilst majority of my experience is in either Australia or New Zealand, I have been lucky enough to work on projects internationally Dubai, Qatar, Brunei, Malaysia and Indonesia. Full project experience can be given, if needed. Please note, on-site attendance can be arranged. Design works can be completed in AutoCAD or REVIT, with calculation packages. Specifications and briefs will be filled out in our own template, unless provided by the client. INDUSTRY WORKING KNOWLEDGE: NCC - BCA Relevant Australian Standards, such as (AS) 1670, 2118.1, 2118.4, 2118.6, 2419, 2441, 2444, 2941. New Zealand Standards, such as (NZS) 4541, 4510, 4503, 4512 International codes such as (NFPA) 10, 11, 12, 13, 14, 15, 16, 20, 22, 24, 30 FM data sheets UAE Fire and Life Safety Code of Practice

Electrical Engineer, having Eight (08) years of experience in Electrical Design of projects pertaining to Brown & Green Field. The area of work includes Oil & Gas, FMCGs, Process and Power industries.... Read more

Electrical Engineer, having Eight (08) years of experience in Electrical Design of projects pertaining to Brown & Green Field. The area of work includes Oil & Gas, FMCGs, Process and Power industries. The core activities includes preparation of Initial feasibility, Budgeting estimates, FEED development, Engineering Design, Review of vendor prints, tender document or Procurement packages, Bids Evaluation and As-built preparation. BUILDING ELECTRICAL DESIGN EXPERTISE • Formulation of load requirements considering lighting systems, power systems, HVAC package, Slop water package, Fire fighting systems, BMS systems, CCTV, LAN Voice, Façade lighting and other utilities as per building size and project requirements. • Design/calculation/selection of Basic electrical generation and distribution system/philosophies such as (selection of Voltage levels LV/MV, initial short circuit calculations). • Design of Utility power connection and distribution schemes. • Design of Utility power and emergency generation/distribution systems by sizing and placement of generators and MDBs and Sub distribution boards. • Space marking layouts for electrical equipments and cable ducts requirements. • Detail Designing of Key SLDs and their protection and control Schemes considering Bus bar arrangements, couplers, operating scenarios, synchronization/transfer schemes etc). • Selection of control voltages for switchgear/Generators/BMS (UPS/DC rectifier), considering Power failure. • Detailed Electrical Design / layouts for Lighting, Power, Earthing, CCTV, Fire alarm, DATA, Telephone, Public address, Access Control & Lightning protection systems etc • Specifications and datasheets of Major electrical equipments for installation and procurement etc. • LUX level calculations on DIALUX. • Calculations for Earthing, Lightning protection systems. • Power cable schedule, selection of cables glands, Isolators etc. • Load Distribution Schedule. • Typical Installation details and sectional views. • Generation of MEP coordination layouts and Shop drawings. • Generating of BOQ and MEP technical tender package. • Review dossiers submittals & close-out activities and documentation management including As-Builts, O&M manuals, and Guarantee & Warranty certificates etc. PLANT ELECTRICAL DESIGN EXPERTISE • Formulation of load list considering package loads, P&IDs, Civil building and utilities requirements, HVAC, Fire fighting, generator auxiliaries and other electrical consumers. • Design/calculation/selection of Basic electrical generation and distribution system/philosophies such as (selection of Voltage levels LV/MV, initial short circuit calculations). • Selection of optimum location for generation/distribution systems by initial sizing and placement of generators and Distribution schemes. Selection of locations for power house and Main Distribution boards considering minimum cable lengths and Hazardous envelope. • Detail Designing of Key SLDs and their protection and control Schemes considering Bus bar arrangements, couplers, operating scenarios, synchronization/transfer schemes etc). • Selection of control voltages for switchgear/Generators/PLC/DCS (UPS/DC rectifier), considering Power failure and black start of plant etc. • Selection of Motor control mechanism Local and Auto mode interfacing with PLC/DCS/ESD/Load shedding Schemes. • Preparation of detailed Scope of works for EPC & PC packages, Electrical Design Basis of projects, specifications and datasheets of Major electrical equipments etc. • Detailed ETAP based Network Analysis for Short Circuit, Load Flow and Motor Starting. • Designing of sub distribution schemes for normal and emergency electrical users (UPS / DC rectifier). • Electrical design of Power house buildings and Switchgear/MCC rooms (Sizing of Rooms, Cable Route selection via cable trenches, cable cellar, cable trays segregating the distances between the different voltage level cables etc). • Plant Cable routing Layouts (Underground cable trenches, Overhead cable bridges, Cable trays/conduits network, cable entries to buildings, packages, skids, etc). • Marking of Hazardous Area Classification layouts as per API 500 and API 505 and Attended HAZOP sessions. • Design/Calculations for Earthing, NGR, Lightning protection systems. • Design for Plant lighting system, LUX level calculations, Sockets power distribution etc. • Power and control cable schedule, selection of cables glands, JB schedule. • Cathodic protection system for tanks & pipelines. • Providing instruction and support to electrical designers for the preparation of electrical equipment layout, cable routing plans, Power & Lighting layouts, grounding layouts, building electrification, typ installation detail drawings etc. • Generating RFQ with extraction of MTO and BOQ from design and providing procurement assistance. • 3D modeling of the electrical equipments to avoid clashes from other equipments and UG services coordination. • Confirms product performance by

Fire Fighting & Fire Alarm Design Engineer with strong expertise in NFPA-compliant systems. Skilled in preparing shop drawings, hydraulic calculations, BOQs, and layouts using AutoCAD. Experienced wit... Read more

Fire Fighting & Fire Alarm Design Engineer with strong expertise in NFPA-compliant systems. Skilled in preparing shop drawings, hydraulic calculations, BOQs, and layouts using AutoCAD. Experienced with clean agent systems (FM-200, FK-5-1-12, HPCO₂, Foam) and fire alarm brands such as Notifier and Simplex. Successfully designed and delivered fire protection systems for more than 50 Bank Misr branches and other large-scale projects. Background in Electrical Engineering with a focus on fire protection, ensuring accurate, reliable, and code-compliant solutions.

I am a Mechanical Design Engineer specialized in Fire Fighting, HVAC, and Plumbing systems, with solid experience in designing and coordinating MEP systems according to international codes such as NFP... Read more

I am a Mechanical Design Engineer specialized in Fire Fighting, HVAC, and Plumbing systems, with solid experience in designing and coordinating MEP systems according to international codes such as NFPA and ASHRAE. I have worked on preparing design and shop drawings, performing hydraulic and load calculations, and coordinating with multidisciplinary teams to deliver efficient and code-compliant solutions.

Mechanical MEP Engineer specialized in Fire Fighting, Plumbing, and HVAC Systems, with strong experience in Mechanical Design, BIM Modeling, Shop Drawings, and Hydraulic Calculations. Proficient in R... Read more

Mechanical MEP Engineer specialized in Fire Fighting, Plumbing, and HVAC Systems, with strong experience in Mechanical Design, BIM Modeling, Shop Drawings, and Hydraulic Calculations. Proficient in Revit MEP, AutoCAD, and Elite Fire for developing coordinated BIM models, preparing construction drawings, and designing mechanical systems in accordance with project requirements, NFPA, ASHRAE, and industry standards. Experienced in Fire Fighting and Plumbing system design, HVAC design support, multidisciplinary coordination, and technical office activities throughout different project stages. Currently seeking opportunities as a Mechanical MEP Engineer, Technical Office Engineer, BIM Modeler, or Mechanical Design Engineer in Saudi Arabia and the UAE.

Currently work as a Design Engineer for RAPID Petronas Project for Fire Fighting Work Scope.

Currently work as a Design Engineer for RAPID Petronas Project for Fire Fighting Work Scope.

A Mechanical Engineer who Design HVAC, Plumbing, and Firefighting systems for residential and commercial buildings, with a particular focus on hospitals. I've successfully designed 15+ international H... Read more

A Mechanical Engineer who Design HVAC, Plumbing, and Firefighting systems for residential and commercial buildings, with a particular focus on hospitals. I've successfully designed 15+ international Hospitals of KSA and UAE, as well as the Africa and Pakistan My expertise lies in designing systems according to international standards such as ASHRAE, IPC, and NFPA, etc. Throughout my career, I've been dedicated to delivering high-quality solutions that meet the unique demands of each project, ensuring optimal functionality and compliance. If you're looking for a professional with a proven track record in mechanical design engineering for critical infrastructure, feel free to connect. I'm passionate about contributing my skills to innovative projects and collaborations that make a meaningful impact. Let's connect and explore how we can work together to achieve success in our respective endeavors

Experienced Mechanical Engineer specializing in the design of Fire Fighting and Plumbing systems for residential, commercial, and industrial projects. Skilled in NFPA, IPC, and local codes, with hands... Read more

Experienced Mechanical Engineer specializing in the design of Fire Fighting and Plumbing systems for residential, commercial, and industrial projects. Skilled in NFPA, IPC, and local codes, with hands-on expertise in AutoCAD, Revit, and hydraulic calculations. Successfully delivered compliant and cost-effective designs for high-rise buildings, hotels, and infrastructure projects. Holds a B.Sc. in Mechanical Engineering with over 15 years of experience in design, supervision, and coordination.

I am a Mechanical Engineer with over 10 years of specialized experience in the design and estimation of fire protection systems across commercial, residential, and industrial projects in the UAE, Qata... Read more

I am a Mechanical Engineer with over 10 years of specialized experience in the design and estimation of fire protection systems across commercial, residential, and industrial projects in the UAE, Qatar, and India. My expertise spans fire alarm systems, sprinkler systems, clean agent systems, and emergency lighting, backed by strong proficiency in AutoCAD, HASS, and FM200 flow calculation tools. I have successfully led design and estimation efforts for high-value projects such as Place Vendome Lusail, Doha Festival City, and Anantara Eco Resort & Spa. My work is grounded in international standards including NFPA, LPCB, and UAE Fire Code, ensuring compliance and safety in every solution I deliver.

I am a Senior Process Safety and Fire Protection Designer with extensive experience in the Offshore and Onshore Oil & Gas industry, as well as process plants, commercial buildings, and residential dev... Read more

I am a Senior Process Safety and Fire Protection Designer with extensive experience in the Offshore and Onshore Oil & Gas industry, as well as process plants, commercial buildings, and residential developments. I specialize in delivering code-compliant, high-integrity safety designs that protect lives and high-value assets. Software Proficiency: Expert-level command of AutoCAD, MicroStation, SP3D, and Navisworks for precise 2D/3D modeling and clash detection.

Robertson is a Mechanical Engineer with more five (5) years of work experience across a wide range of multidisciplinary projects for a range of industrial, government, private sector and institutional... Read more

Robertson is a Mechanical Engineer with more five (5) years of work experience across a wide range of multidisciplinary projects for a range of industrial, government, private sector and institutional clients. He has a particular interest in the design and construction of low energy sustainable buildings, Fire and Life Safety, and building energy management systems. His training and experience across a wide range of building services design, has included the areas of HVAC, fire protection, plumbing and drainage, and LPG System

I am an hvac engineer with 16 years of experience. Hot water systems,superheated water systems,steam systems,clean room systems,fire fighting,compressed air and sanitary systems are my expertise.

I am an hvac engineer with 16 years of experience. Hot water systems,superheated water systems,steam systems,clean room systems,fire fighting,compressed air and sanitary systems are my expertise.

✅ AutoCAD Fire Fighting Shop Drawings ✅ Hydraulic Calculations ✅ Water Mist Systems ✅ Pump Room Design ✅ Network Layout ✅ Suction & Discharge Piping

✅ AutoCAD Fire Fighting Shop Drawings ✅ Hydraulic Calculations ✅ Water Mist Systems ✅ Pump Room Design ✅ Network Layout ✅ Suction & Discharge Piping

Hello everybody, welcome to my profile and I hope to be able best design for your project I'm mostafa anber from Egypt , I'm Mechanical Engineer Specialized in Design (HVAC,PLUMBING,FIREFIGHTING,SOL... Read more

Hello everybody, welcome to my profile and I hope to be able best design for your project I'm mostafa anber from Egypt , I'm Mechanical Engineer Specialized in Design (HVAC,PLUMBING,FIREFIGHTING,SOLIDWORKS) Systems with all available software (AUTOCAD , REVIT, SOLIDWORKS) And All Calculations -- MY Skills 1- HVAC design and software (Preparation & review of design, construction/execution and shop drawings, Design reports, Project Specifications and any other necessary documents pertaining to the design and construction of HVAC (Heating Ventilating and Air Conditioning) System,Create layout for equipment, ducting and piping of Heating, Ventilating and Air Conditioning (HVAC) System including sizing of pipes and ducts) - I use all international codes such as ( Ashrae , NFPA, UPC, IPC, UPC ,ASPE, SMACNA other International design codes) 2- Plumbing & Fire Fighting ( Designing, Shop Drawing, As Built drawing and Supervision services related to Plumbing, Firefighting systems ) 3- Duct and All HVAC , MEP Take off and Estimating 4- Simulation (Ventilation Using Ventsim Software , Hydraulic and Pneumatic Using FluidSim Software) 5-digital logic design 6- Convert PDF , JPG,Sketch to dwg or Rvt (AUTOCAD , REVIT) 7- Technical Reports (Cooling and Heating Loads reports , Ventilation Reports , External static pressure ,heat transfer , fluid mechanics , thermodynamics) 8- tutorial (HVAC , FIREFIGHTING , PLUMBING , DESIGN DRAWING , SHOP DRAWING , AUTOCAD , MEP , ARCH , REVIT , PHYSICS ,THERMODYNAMICS , HEAT TRANSFER , FLUID MECHANICS , MATHS,Dynamics,Hydraulics and Pneumatics,Calculus I- II,Differential Equations) ---- My Software Skills 1- Autodesk AutoCAD 2- Autodesk AutoCAD MEP ,ARCH 3- Autodesk Revit 4- Mechanical Ventilation Simulator (VentSim) 5-Hap program 6- Ductsizer 7- Elite programs 8-Pump Selection Software ( Dp selector , and Grundfos , KSP online selection) 9- Pump Sizing and pump Calculator 10- Autofluid 11- pipesizer 12- Microsoft office Software 13- Bluebeam 14 - SOLIDWORKS

Eleven Years and One Months, Senior Engineering at installation department and designer for low current Mega Projects including Fire Alarm system, Fire Fighting, Access control, CCTV, Master Clock sys... Read more

Eleven Years and One Months, Senior Engineering at installation department and designer for low current Mega Projects including Fire Alarm system, Fire Fighting, Access control, CCTV, Master Clock system, Sound system, Intrusion Security System, Data Networking, Security equipment, and other alarms systems, from October 2011 to November 2022. The Most of Work in Fire Alarm Systems "Gent by Honeywell", "Fire Lite" “Farenhyt Series” and "HOTCHIKI fire". And Also, Access Control systems “Pro-Watch by Honeywell”, “WINPAK by Honeywell”, HID systems and Spectra Access Control.