abiotice

Experience

• Mechanical Engineer The Indus Hospital · Full-time Mar 2023 – Present 1 yrs 1 mos Karachi, Sindh, Pakistan Responsibilities:
  ❖ Designing of hospitals according to standards concerned with hospital designing.
  ❖ 1350 beds Medical City (Hospital buildings, Medical University and Energy Centre 15 floors each) and 600 beds Block 1 & 2 Hospital building 8 floors each.
  ❖ HVAC load of Medical City Karachi (8500RT) and QF & NST Lahore (3000RT)
  ❖ Reviewing the BIM model and ensure the clash free between all MEP services and the constructability on site.
  ❖ To place Terminal HEPA / ULPA Filters on air diffusers for contamination of dust particles.
  ❖ Equipment selection, such as Chillers, Cooling Tower, Air Handling Units, Heat Exchangers, Pumps, Fans, Boilers, Calorifiers, Variable Refrigerant Flow, Fan Coil Units as per requirement.
  ❖ Involved in coordination of cogeneration system at Energy Centre.
  ❖ Involved in procurement of Cold room system (-6 °C & -40°C) technically.
  ❖ Witnessed on-site pressure tests and duct leakage testing during first fix works.
  ❖ Commissioned air-cooled chiller, chill water pumps, AHUs, FCUs, and piping network with valve packages.
  ❖ Designed pneumatic tube system and calculated steam requirement in different systems.
  ❖ Supervised installation of various plumbing fixtures and coordinated with contractors.
  ❖ Designed sewerage treatment plant, Chlorine dosing & Recirculation system of water which is effective against most bacteria (including Legionella) and harmless to humans (when within guideline values).
  ❖ Worked on Clean Agent systems (NOVEC, FM200 & CO2)
  ❖ Preparing contract documents, quotations, engineering estimate, and comparatives.
  ❖ Review the shop drawings, Submittals, construction details, product data, material samples, inspection plans, delivery schedules to confirm compliance with per project Specification.
  
  Projects:
  ❖ Hospital Buildings 1 & 2
  ❖ University Building
  ❖ Energy Centre
  ❖ Mosque
  ❖ QF & NST Lahore
  ❖ Expo Centre isolation facility (COVID-19 HDU 140-beds)
  ❖ GDA Hospital Gwadar
  ❖ Pak-China Friendship Hospital Gwadar (CPEC)
• Mechanical Engineer Y.H Associates Consulting Engineers · Full-time Dec 2018 – Jan 2020 1 yrs 1 mos Karachi, Sindh, Pakistan Responsibilities:
  ❖ Cooling and Heating Load calculations on HAP (Hourly Analysis Program) Calculation Using ASHRAE Standards on the basis of different options with variables such as different outdoor temperatures, occupancies, Equipment watts and set point temperature.
  ❖ Select and Design HVAC System using codes & standards.
  ❖ Equipment selection, Duct sizing with VAV & CAV, CHW & HW Pipe sizing & Design.
  ❖ Fire Fighting & Plumbing working in accordance with NFPA & (International plumbing codes)
  ❖ Calculate Heat load using Hap Software, & Psychometric Heat load calculation manually.
  ❖ Prepare Single Line diagram of MCC'S & gives load of Mechanical Equipment.
  ❖ Air balancing (Functional Diagram), Staircase pressurization Fan & HRU Calculations.
  ❖ Medical Gas sizing, calculations equipment selection of pumps, compressor's & cylinders based on Health technical memorandum (HTM) & Beaconmedaes.
  ❖ Prepare Tender packages which Includes Detailed Drawings, Schedules, BOQ's & specifications. ❖ Preparing contract documents, quotations, engineering estimate, and comparatives.
  ❖ Approval/Dis Approval of Submittals, Shop Drawings as per project Specification.
  ❖ Guiding the Draftsman for preparing the drawing. ❖ Worked with Client at Site Incorporate Client/Architect comments till satisfaction.
  
  Projects:
  ❖ Indus Hospital & Health Network
  ❖ Aga Khan University Hospital
  ❖ Pakistan Kidney and Liver Institute
  ❖ Sindh Institute of Urology & Transplantation
  ❖ National Institute of Cardiovascular Diseases
  ❖ House of Habib
  ❖ Balochistan Askari Mall
  ❖ Serena Hotel Sust and Hunza
  ❖ First Micro Finance Bank
  ❖ Thal Limited – Paper sack
  ❖ Imtiaz Super Market
  (Largest supermarket in Pakistan)
  ❖ Chase UpResponsibilities: ❖ Cooling and Heating Load calculations on HAP (Hourly Analysis Program) Calculation Using ASHRAE Standards on the basis of different options with variables such as different outdoor temperatures, occupancies, Equipment watts and set point temperature. ❖ Select and Design HVAC System using codes & standards. ❖ Equipment selection, Duct sizing with VAV & CAV, CHW & HW Pipe sizing & Design. ❖ Fire Fighting & Plumbing working in accordance with NFPA & (International plumbing codes) ❖ Calculate Heat load using Hap Software, & Psychometric Heat load calculation manually. ❖ Prepare Single Line diagram of MCC'S & gives load of Mechanical Equipment. ❖ Air balancing (Functional Diagram), Staircase pressurization Fan & HRU Calculations. ❖ Medical Gas sizing, calculations equipment selection of pumps, compressor's & cylinders based on Health technical memorandum (HTM) & Beaconmedaes. ❖ Prepare Tender packages which Includes Detailed Drawings, Schedules, BOQ's & specifications. ❖ Preparing contract documents, quotations, engineering estimate, and comparatives. ❖ Approval/Dis Approval of Submittals, Shop Drawings as per project Specification. ❖ Guiding the Draftsman for preparing the drawing. ❖ Worked with Client at Site Incorporate Client/Architect comments till satisfaction. Projects: ❖ Indus Hospital & Health Network ❖ Aga Khan University Hospital ❖ Pakistan Kidney and Liver Institute ❖ Sindh Institute of Urology & Transplantation ❖ National Institute of Cardiovascular Diseases ❖ House of Habib ❖ Balochistan Askari Mall ❖ Serena Hotel Sust and Hunza ❖ First Micro Finance Bank ❖ Thal Limited – Paper sack ❖ Imtiaz Super Market (Largest supermarket in Pakistan) ❖ Chase Up…see more
  Skills: HVAC Design · Building Services Engineering · Building Services · Carrier HAP · Microsoft Office · AutoCAD · M&E · MEP Design · Fit-outSkills: HVAC Design · Building Services Engineering · Building Services · Carrier HAP · Microsoft Office · AutoCAD · M&E · MEP Design · Fit-out
  Design EngineerDesign Engineer
  May 2018 - Dec 2018 · 8 mosMay 2018 - Dec 2018 · 8 mos
  Responsibilities:
  ❖ Experience in HVAC System Designing which includes conditioning, ventilation, and heating.
  ❖ Experience in performing Heat Load Calculation as per ASHRAE standards.
  ❖ Perform duct sizing according to the required FPM/CFM from heat load calculation.
  ❖ Experience in Quality Assurance of equipment according to the requirement
  ❖ Preparing contract documents, quotations, engineering estimate, and comparatives.
  ❖ Evaluating tenders and providing recommendations on the basis of bid evaluation.
  ❖ Prepare bill of quantities (BOQs) and Estimations.
  ❖ Experience in plumbing system according to IPC code, ASPE and other standards concerned with plumbing designing.Responsibilities: ❖ Experience in HVAC System Designing which includes conditioning, ventilation, and heating. ❖ Experience in performing Heat Load Calculation as per ASHRAE standards. ❖ Perform duct sizing according to the required FPM/CFM from heat load calculation. ❖ Experience in Quality Assurance of equipment according to the requirement ❖ Preparing contract documents, quotations, engineering estimate, and comparatives. ❖ Evaluating tenders and providing recommendations on the basis of bid evaluation. ❖ Prepare bill of quantities (BOQs) and Estimations. ❖ Experience in plumbing system according to IPC code, ASPE and other standards concerned with plumbing designing.…see more
  Skills: HVAC Design · Building Services Engineering · Carrier HAP · Microsoft Office · AutoCAD · M&E
• Mechanical Engineer Sales and Application · Full-time Dec 2017 – May 2018 5 mos Karachi, Sindh, Pakistan Responsibilities:
  ❖ Generate quotations, drawings, and outline technical specifications.
  ❖ Review engineering drawings, analyze design, and retrieve information to complete drawings, layout, or design.
  ❖ Single source customer contact for all project related issues/activities, to include project management.
  ❖ Manage contractual modifications during the course of a project to ensure project profitability.
  ❖ Provide technical support and information to staff and customers.
  ❖ Provide quotation to customers by preparing accurate pricing for a project after reading/reviewing specifications, drawings and gathering correct documents.
  ❖ Learn specific in-house engineering design and selection software programs.
  ❖ Ability to understand and read technical details from prints, drawings, and other documents.Responsibilities: ❖ Generate quotations, drawings, and outline technical specifications. ❖ Review engineering drawings, analyze design, and retrieve information to complete drawings, layout, or design. ❖ Single source customer contact for all project related issues/activities, to include project management. ❖ Manage contractual modifications during the course of a project to ensure project profitability. ❖ Provide technical support and information to staff and customers. ❖ Provide quotation to customers by preparing accurate pricing for a project after reading/reviewing specifications, drawings and gathering correct documents. ❖ Learn specific in-house engineering design and selection software programs. ❖ Ability to understand and read technical details from prints, drawings, and other documents.
  Skills: Microsoft Office · AutoCAD