Hire the best freelance Electrical Plan Drafting expert designers for your company

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

Highly accomplished engineering professional with 9 year engineering experience; having solid background in lighting & power distribution schemes, security systems, fire-detection systems, all type o... Read more

Highly accomplished engineering professional with 9 year engineering experience; having solid background in lighting & power distribution schemes, security systems, fire-detection systems, all type of 2D drafting.

Hello, I am an architect/ interior designer. I am specialized on Interior design , exterior design, facade renovation and building permit work. My works include: 1.Residential Exterior&Interior Desig... Read more

Hello, I am an architect/ interior designer. I am specialized on Interior design , exterior design, facade renovation and building permit work. My works include: 1.Residential Exterior&Interior Design (Apartment\Villas) 2.Hotels Exterior & Interior Design (Rooms, Lobby& Reception, Hallways,Restaurant &Bars) 3.Commertial Interior & Service units such as Bars,Restaurants,Dental Clinic,Pizza shop,Offices,Showrooms. 4.Agroutouristic Village Unit Design I use software like Sketchup & Vray, Lumion, Autocad and Photoshop I guarantuee the best quality of your projects and quick delivery.

I am Janith Weerasuriya, a dynamic individual with a solid foundation in engineering from the Faculty of Engineering, University of Ruhuna. With a B.Sc. Eng. Hons in Mechanical and Manufacturing Engin... Read more

I am Janith Weerasuriya, a dynamic individual with a solid foundation in engineering from the Faculty of Engineering, University of Ruhuna. With a B.Sc. Eng. Hons in Mechanical and Manufacturing Engineering, earned between 2018 and 2022, I embarked on a journey marked by academic rigor and practical learning. Transitioning into the professional realm, I honed my skills and expertise at Midas Safety Sri Lanka (Pvt) Ltd, where I gained invaluable experience in the field of industrial safety and quality management. This tenure equipped me with a comprehensive understanding of operational intricacies and the importance of precision in engineering practices. Subsequently, as an Automation and Project Engineer at Effective Engineering and Automation (Pvt) Ltd, I delved into the realm of automation, machine design, and project management. My role involved spearheading initiatives ranging from machine design to electrical panel wiring and layout designing, contributing to the enhancement of operational efficiency and productivity. With a passion for innovation and a commitment to excellence, I continually strive to leverage my diverse skill set and experiences to drive impactful solutions in the field of engineering. My journey thus far has been defined by a relentless pursuit of growth, learning, and the relentless pursuit of excellence.

I am a Designer with more experience in substation building & industrial buildings. I am familiar with Autocad, Revit & sketch up user. Specialties: 3D Modeling Plan & sections Single Line Diagrams El... Read more

I am a Designer with more experience in substation building & industrial buildings. I am familiar with Autocad, Revit & sketch up user. Specialties: 3D Modeling Plan & sections Single Line Diagrams Electrical Substation layout & section.

I'm using AutoCAD in creating electrical drafting for more than 5 years as part of my primary task as a project and maintenance supervisor in my previous job on a Food and beverage manufacturing plant... Read more

I'm using AutoCAD in creating electrical drafting for more than 5 years as part of my primary task as a project and maintenance supervisor in my previous job on a Food and beverage manufacturing plant. The 2D design has been my forte since I start drafting floor plans, electrical layouts (lighting & power), Single line, schematics, and riser diagrams. As an experienced draftsman, I am already familiar with most tools in AutoCAD, which increases my speed in drafting and finishing the work on time. For 3D modeling I use SolidWorks in creating lighting fixtures support, manhole cover and Utility box intended for fabrication and visualization of the part or unit.

An Electrical Building Designer with Decade plus of experience in generating designs. I have good experience in electrical and Lighting Design & Calculations for Homes, Office Buildings , Schools and... Read more

An Electrical Building Designer with Decade plus of experience in generating designs. I have good experience in electrical and Lighting Design & Calculations for Homes, Office Buildings , Schools and Retail . I can do Electrical Services Drawings in 2d AutoCAD, Power Calculations IEC Standard. Scope of Services: Electrical lighting design Electrical Power design Electrical load calculation schedule Electrical schematic diagram Distribution Board Main Panel Cable and Panel size Single line diagram CCTV Smoke/Heat detectors Lightning Arrestor

Hello I am Mohammad Khairul Bashar Working in Architectural Drawing and Drafting Field at Beginners level.

Hello I am Mohammad Khairul Bashar Working in Architectural Drawing and Drafting Field at Beginners level.

Diploma in Mechanical Drafting and CAD Technology from Tennessee College of Applied of Sciences. Self-taught Revit LT user and modeler, with a professional background in Mechanical Design with Solid W... Read more

Diploma in Mechanical Drafting and CAD Technology from Tennessee College of Applied of Sciences. Self-taught Revit LT user and modeler, with a professional background in Mechanical Design with Solid Works. CSWA certified and certified in advanced sheet metal design.

I am an expert in AUTOCAD Building Design & 2D Drawing works,Talented in usage of all Other Microsoft programs; such as MS Word, MS Excel, MS Powerpoint .

I am an expert in AUTOCAD Building Design & 2D Drawing works,Talented in usage of all Other Microsoft programs; such as MS Word, MS Excel, MS Powerpoint .

I DESIGN IN 3D AND HAVE THE SKILLS TO BUILD WHAT I DESIGN. I DESIGN IN AUTODESK INVENTOR FOR MECHANICALS. 3D PRINT IN CURA. ETAP 16 FOR ELECTRICALS.

I DESIGN IN 3D AND HAVE THE SKILLS TO BUILD WHAT I DESIGN. I DESIGN IN AUTODESK INVENTOR FOR MECHANICALS. 3D PRINT IN CURA. ETAP 16 FOR ELECTRICALS.

CDEGS Software, Electrical Calculations, Electrical 2D & 3D CAD Works A Cumulative experience of 7.5 years in Electromagnetic Interference Studies on Pipelines and Design of Earthing & Lightning Prot... Read more

CDEGS Software, Electrical Calculations, Electrical 2D & 3D CAD Works A Cumulative experience of 7.5 years in Electromagnetic Interference Studies on Pipelines and Design of Earthing & Lightning Protection System of High, Medium and Low Voltage Systems. Available to support in Electrical CAD works 2D&3D and any type of electrical engineering related supports.

Machine desing Mechanical part desing Assembly 2D to 3D, paper to 3D etc. conversation PLC programming EPlan desing

Machine desing Mechanical part desing Assembly 2D to 3D, paper to 3D etc. conversation PLC programming EPlan desing

I’m Danyal Nasir, an Electrical & Power Systems Engineer with a proven track record delivering complete design packages and technical studies for renewable energy projects, including commercial solar... Read more

I’m Danyal Nasir, an Electrical & Power Systems Engineer with a proven track record delivering complete design packages and technical studies for renewable energy projects, including commercial solar installations, grid interconnection, and electrical infrastructure. I specialize in: Full IFC & as-built plan sets, construction-ready documentation, and interconnection packages Site layouts, panel schematics, conduit routing, and shading analysis Single-line & three-line diagrams, protection and panel schedules, cable routing Load flow, short-circuit, and arc-flash studies, protection coordination Voltage rise & cable sizing calculations, utility grid-compliant submissions I’ve supported major clients like NextEra Energy, Opal Energy, and Exactus Energy, delivering execution-ready packages that meet NEC and utility requirements. I’m confident I can bring that same precision and compliance-first mindset to your electrical projects

7+ Years of working experience in the Maintenance & Service Field. 3 Years of working experience in the Electrical Design & Drafting Field.

7+ Years of working experience in the Maintenance & Service Field. 3 Years of working experience in the Electrical Design & Drafting Field.

A result-oriented professional with 3 year of experience in Project Management, Electrical Engineering, Design Development, Automation, Production Engineering, Preventive Maintenance, Maintenance Oper... Read more

A result-oriented professional with 3 year of experience in Project Management, Electrical Engineering, Design Development, Automation, Production Engineering, Preventive Maintenance, Maintenance Operations, Assembly Process, Ladder, Autocad electrical & Eplanp8 electrical design , control panel wiring, panel design

Mechatronics engineer with vast experience of ATE Panel & Harness Design using SOLIDWORKS Electrical 2D & 3D, Control System Design, Control Panel & Electrical Schematics design using AutoCAD Electric... Read more

Mechatronics engineer with vast experience of ATE Panel & Harness Design using SOLIDWORKS Electrical 2D & 3D, Control System Design, Control Panel & Electrical Schematics design using AutoCAD Electrical, Design of Piping & Instrumentation Diagram (P&ID)

I am Electrical Engg. with 12 years of Experience in Electrical design and drafting work. I worked with well known companies like L&T ECC, Sobha Developers Ltd., Simzu Corporation etc. I have good c... Read more

I am Electrical Engg. with 12 years of Experience in Electrical design and drafting work. I worked with well known companies like L&T ECC, Sobha Developers Ltd., Simzu Corporation etc. I have good command on Electrical CAD design and drafting work, as well as Dilux EVO Lighting design system. I can do All type of Electrical 2D Layouts Ex. Lighting, Power, Cable tray, Wire ways, Earthing, Panel GA drawing, SLD etc.

I am an Engineer, specialized in MEP Engineering with expertise in Mechanical, Electrical, Plumbing(MEP), Architectural and Civil AutoCAD, Autodesk Revit and Sketchup(2D/3D) plans.

I am an Engineer, specialized in MEP Engineering with expertise in Mechanical, Electrical, Plumbing(MEP), Architectural and Civil AutoCAD, Autodesk Revit and Sketchup(2D/3D) plans.

I'm Experienced Associate Engineer with 9+ years of expertise in drafting & BOQ services across various fields including architecture, interior, exterior, landscape, civil, steel structure, electrical... Read more

I'm Experienced Associate Engineer with 9+ years of expertise in drafting & BOQ services across various fields including architecture, interior, exterior, landscape, civil, steel structure, electrical, public health, public address, fire alarm, smart instrumentations, and mechanical drawings. I specialize in producing proposal, approval, and shop drawings for projects in Europe, America, Australia, GCC, and Asian countries. Committed to delivering high-quality work on time at affordable rates, utilizing AutoCAD and MS Office. Hardworking and dedicated to your project's success.

I am 20 year experience AutoCAD Designer & Design Assistant Designer . I am Expert in AutoCAD Release 2007,2014 for 2D Design, Architectural Presentation Drawings, Approval Drawings, Construction Draw... Read more

I am 20 year experience AutoCAD Designer & Design Assistant Designer . I am Expert in AutoCAD Release 2007,2014 for 2D Design, Architectural Presentation Drawings, Approval Drawings, Construction Drawings, Details Working Drawings, Shop Drawings, Interior Drawings, Landscaping Drawings & Structural Construction Drawings, MEP (Mechanical, Electrical, Plumbing) Drawings for Residential Building, Commercial Tall Building, Factory, Educational Institute, Hospital. I also have been working in Consulting Firm ,Construction Firm,& Real State Companies.

Have a vast experience on working with AutoCAD. Have done many projects some of them are as below: 1.Naval Designs including Docks, Slipways, Vessels and Jetty. 2. Company Designs from Foundation to F... Read more

Have a vast experience on working with AutoCAD. Have done many projects some of them are as below: 1.Naval Designs including Docks, Slipways, Vessels and Jetty. 2. Company Designs from Foundation to Full working Condition. 3. Interior Designer with Housing Project and Furniture with Space saving Ideas. 4.Done Project of Oil Tankers, Tugs, Barges and Passenger Vessels also.

An engineering technologist with more than 6yrs of experience in drawing complete Building Plans (Architectural, Structural, Sanitary, Electrical and Mechanical) using AutoCAD. I have done various of... Read more

An engineering technologist with more than 6yrs of experience in drawing complete Building Plans (Architectural, Structural, Sanitary, Electrical and Mechanical) using AutoCAD. I have done various of projects ranging from a 2 storey residence to a 5 storey office building. I work efficiently and always meets deadlines.

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns.... Read more

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns. Towers, Steel Structure, Mechanical & Civil Drafting. Preparing propose initial conceptual design layouts for various projects. Ability to create detailed construction drawings independently which is included related specifications, and capable of enforcing such specifications. Involve in construction, supervision, inspection and material take-off. Involve with Auto CAD 2D & 3D,Bently open plant 3D-Modeler, Piping plan, piping Isometric Drawings, Sheet Metal Work, Mechanical Drawings, PFD, P&ID, and Civil Layout etc. A keen and dedicated Piping Designer having approx. 10+ years of experience in Oil & Gas, Petrochemical, and Mechanical equipment industries. My Responsibilities Includes: • Preparation and modification of Piping layouts. • Preparation of piping isometrics. • Extraction of isometrics form plan. • Piping of storage tank, vessel, heat exchanger, Pumps and Compressors  equipment layout and general arrangement drawings  Under Ground Piping Drawings  • Preparation and modification of support layout. • Preparation of M.T.O. (Weight Calculation) and B.O.Q. • Sketching to provide information and site conditions.  Preparing Steel Structure drawings for installation, proposed new Platform, Joints detail (Welded & Bolted) Bracing, ladders. • Fabrication detail drawings • Rigging plan views from PDS 3D model. • Site Supervision during Project execution and Turn Around. • Generation of bill of material for Projects. • Preparation and modification of Equipment drawings.  • Support marking as per stress analysis report.  Design the BOX UP for different kind of leakages  • PFD, P&IDs, MSDs.

Electrical Engineer with 23 years experience in same fields between design , instructor , trainer in many MEGA projects . Go one ; you will be satisfaied by the work result

Electrical Engineer with 23 years experience in same fields between design , instructor , trainer in many MEGA projects . Go one ; you will be satisfaied by the work result

- More than 15 years of experience - Management of Technical Documentation - Drawing all kind of electrical and industrial drawings

- More than 15 years of experience - Management of Technical Documentation - Drawing all kind of electrical and industrial drawings