Hire the best freelance Dam Drawings expert designers for your company

Highlights of Qualifications: • More than 43 years of experience in drafting of various structures in dam construction projects • Experienced in the design of excavation in the rock and alluvium (dam... Read more

Highlights of Qualifications: • More than 43 years of experience in drafting of various structures in dam construction projects • Experienced in the design of excavation in the rock and alluvium (dam foundation, side spillway), • Qualified in the design of horizontal, peripheral galleries, access to the relevant structures inside dam body • Fellow technician in various dam construction projects (study and construction projects) • Well-versed in the provision of 3D drawings of dam body and the appurtenant structures, • Skilled at drafting based on 3D models • Quantity survey

Am a PhD student and spend my free time as a freelancer. My primary expertise is in seismic safety assessment of dams in conjunction with skills that I learned along the way such as multi-fidelity mod... Read more

Am a PhD student and spend my free time as a freelancer. My primary expertise is in seismic safety assessment of dams in conjunction with skills that I learned along the way such as multi-fidelity modeling, fracture analysis, etc. Am also familiar with ICS/SCADA and industrial cybersecurity to the point where I am currently setting up my own online course.

Design Engineer, with a large experience in the engineering design sector, with an emphasis on the development of aircraft structures. I worked mainly in the development and of metalic structures and... Read more

Design Engineer, with a large experience in the engineering design sector, with an emphasis on the development of aircraft structures. I worked mainly in the development and of metalic structures and mechanisms, machined, extruded and sheet metal parts as well as some experience with composite materials. I worked in the structural design of several Embraer programs, from the ALX-314 (Super-tucano), the EMB-170E1, Legacy-500, to the C-390 Millenium and others. I coordinated several projects, with emphasis on the design of the KC-390 Cargo Ramp, when I also developed its mechanism. In addition to the aeronautical sector, I worked with projects for the automotive sector (trucks), flood gates for hydroelectric plants, sanitation and irrigation systems. Graduated in Civil Engineering and Mechanical Technician, with Specialization (specialization) in Aeronautical Engineering. Advanced knowledge in 3D modeling, Catia V5, AutoCAD, Solidworks, MSOffice and MSProject, ERP SAP, JIRA, and GD&T. Knowledge and experience in agile management and predictive project management methodologies.

Mainly mechanical projects of dam structures. - Dam gates and all lifting devices - Cranes - Pressure Pipes - Trashracks - Special manufacturing machines I can make calculations, drawings and quantiti... Read more

Mainly mechanical projects of dam structures. - Dam gates and all lifting devices - Cranes - Pressure Pipes - Trashracks - Special manufacturing machines I can make calculations, drawings and quantities.

I am a Civil Engineer with 5+ years of experience working on large-scale hydropower, dam, and infrastructure projects – including Africa’s largest, the Grand Ethiopian Renaissance Dam (5.25 GW) with S... Read more

I am a Civil Engineer with 5+ years of experience working on large-scale hydropower, dam, and infrastructure projects – including Africa’s largest, the Grand Ethiopian Renaissance Dam (5.25 GW) with Salini Impregilo. I specialize in: Structural & civil shop drawings (AutoCAD, Civil 3D, Revit) Reinforcement schedules & bar bending schedules (BBS) Quantity estimation, BOQ, and procurement docs Method statement drawings for dam casting, rock blasting, concrete laying programs Plant layouts (batching, crushing, washing, workshops, warehouses) Intake towers, turbine houses, pump stations, pipelines, balancing dams Road, culvert, bridge, and airport civil works I deliver construction-ready, layer-organized CAD files suitable for international project teams. Available full-time freelance on Cad Crowd.

Architect Engineer & Project Manager | 18 Years in Large-Scale Infrastructure State Engineer in Architecture with 18 years of hands-on experience on some of Algeria's most ambitious infrastructure pro... Read more

Architect Engineer & Project Manager | 18 Years in Large-Scale Infrastructure State Engineer in Architecture with 18 years of hands-on experience on some of Algeria's most ambitious infrastructure projects. I combine a solid architectural background with strong IT and project management skills, giving me a rare dual perspective that adds real value on complex, multi-disciplinary projects. Key experience includes: East-West Highway, Algeria (399 km, $13B project) — Project Coordinator within the ANAS-ITALCONSULT-INCO-STE international consortium, overseeing construction supervision, reporting, budget monitoring, and coordination of Italian, Japanese, and Algerian teams. Beni Haroun Water Transfer — Project Engineer with Condotte d'Acqua S.p.A., involved in technical coordination, TBM/Hydroshield support, geotechnical studies, and tender preparation. Beni Haroun Dam (Dragados-Alstom) — Technical support and AutoCAD documentation for Algeria's largest dam (960M m³ capacity). Proficient in AutoCAD, MS Project, and document management systems. Experienced in producing technical drawings, As-Built plans, construction reports, and coordinating with international engineering teams. Fluent in Arabic, French, and English.

About I’m a Senior Civil Draftsman and Quantity Surveyor with 11+ years of experience in infrastructure, buildings, architectural, structural, MEP, and industrial projects. I specialize in CAD drafti... Read more

About I’m a Senior Civil Draftsman and Quantity Surveyor with 11+ years of experience in infrastructure, buildings, architectural, structural, MEP, and industrial projects. I specialize in CAD drafting, quantity takeoffs, bar bending schedules (BBS), and estimation for both international and local projects. Currently, I’m working as a Technical Engineer with CCTEB on the Chahan Dam Water Treatment Plant Project, assisting the Technical Director with drafting, documentation, and quantity verification. Previously, I have worked with top organizations including IDAP, CCECC, CGICOP, DASCON, Descon, ZKB JV, Sinohydro JV, and Value Engineering Consultancy (Australia/U.S. projects). My expertise includes AutoCAD, Revit, Bluebeam, PlanSwift, and compliance with ACI and U.S. standards. Key achievements include reducing drafting errors by 30% and delivering 100+ shop drawings for international fabrication projects. I’m detail-oriented, deadline-focused, and committed to delivering high-quality results on time.

I am a Civil Engineering Technologist with a Bachelor's degree in Civil Engineering and over 5 years of professional experience in construction, site supervision, and engineering design. Currently wor... Read more

I am a Civil Engineering Technologist with a Bachelor's degree in Civil Engineering and over 5 years of professional experience in construction, site supervision, and engineering design. Currently working as a Senior Site Engineer on large-scale infrastructure projects, including a dam project, I bring hands-on expertise in structural execution, compliance, and quality assurance. My technical skills include: AutoCAD (2D/3D drafting, construction drawings, and detailing) Synchro 6 (project scheduling and 4D simulation) MS Office (project documentation and reporting) Strong knowledge of structural drawings, reinforcement detailing, and site layouts I specialize in preparing accurate CAD drawings, optimizing design workflows, and providing practical engineering solutions that bridge the gap between design and execution. My background in site engineering allows me to ensure that every design is feasible, cost-effective, and construction ready. Whether it’s drafting, modeling, or reviewing engineering drawings, I aim to deliver high-quality results that meet client expectations and project deadlines.

My field experience spans nearly 7 years, with a strong focus on the design and supervision of roads and dams. I have worked extensively on road construction projects, overseeing tasks like earthworks... Read more

My field experience spans nearly 7 years, with a strong focus on the design and supervision of roads and dams. I have worked extensively on road construction projects, overseeing tasks like earthworks, grading, and paving, while ensuring compliance with design specifications and safety standards. In dam projects, I have been involved in site preparation, embankment construction, and spillway design, applying critical thinking to solve challenges related to water flow management and structural integrity. I am proficient in budgeting, client relations, negotiation, and critical thinking, coupled with expertise in Microsoft Office Suite and water and wastewater design software like Autodesk Storm and Sanitary Analysis. Additionally, I aim to further explore advanced engineering concepts as part of your team, which I believe will help me become an even greater asset. My organizational skills and resourcefulness make me an effective leader and a quick learner, equipped to adapt to and manage field projects. These qualifications, along with my experience, make me a strong candidate for your team.

Mechanical Design Engineer specializing in EV battery systems, CAD modeling, product development, structural analysis, manufacturing engineering, and 3D printing design. Skilled in CAD design, sheet... Read more

Mechanical Design Engineer specializing in EV battery systems, CAD modeling, product development, structural analysis, manufacturing engineering, and 3D printing design. Skilled in CAD design, sheet metal design, battery pack architecture, FEA validation, design optimization, technical documentation, Design for Manufacturing (DFM), and Design for Additive Manufacturing (DAM). Proficient in SolidWorks, ANSYS, MATLAB, and engineering analysis tools for developing efficient, reliable, manufacturable, and 3D-print-ready products. Experienced in creating 3D models, engineering drawings, battery enclosures, mechanical assemblies, structural simulations, and 3D printable components while focusing on performance, safety, cost-effectiveness, and manufacturability. Capable of supporting projects from concept development through design validation, prototyping, 3D printing, and production-ready documentation. My expertise includes CAD modeling, sheet metal design, battery pack architecture, FEA validation, manufacturing optimization, and technical documentation. I have worked extensively with SolidWorks, ANSYS, MATLAB, and EV powertrain components, delivering designs that balance performance, manufacturability, Reliability, and cost. I am passionate about solving complex engineering challenges and helping clients transform concepts into production-ready designs. Whether it's product development, battery enclosure design, structural validation, CAD modeling, or manufacturing support, I bring a practical engineering approach backed by real-world project experience.

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic... Read more

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic designs, cost analysis, feasibility studies and Bim modelling. I have gained experience working with various software such as C3D, Revit and Infraworks. This has given me ample time to develop a strong work ethic necessary for work in the field. Previously I worked for AECOM ZA where I have had extensive site experience and built strong competencies in inspection, report writing and people’s management. I worked on the Temba water purification plant phase 6 (TWPP-6) and Mooi Mgeni transfer scheme phase 2 (MMTS-2). Working on various aspects of the TWPP-6 and MMTS-2 has given me a great appreciation and insight into the importance of Water and Environmental Engineering in the future of any developing country. As an Engineering inspector and water Engineer I have developed flexibility by being required to inspect multiple disciplines under construction supervision such as buildings and civils works on various water purification structures, pump stations, substations, pipe chambers precast yard and housing platforms. I have also done a good deal of pipe line inspection involving monitoring, clearing, excavation, laying of bedding material, pipe laying, backfilling, lining and coating pipes, mechanical installations, and commissioning. I was fortunate to gain valuable insight and exposure as student whilst working on the Spring Grove Dam under BKS Consulting. I worked in the laboratory for two weeks doing certain lab tests as well as the evaluation of the results. I assisted with the inspection of RCC as well as the reinforced concrete for the intake structure. I also monitored the design of the layer works for the roads and the design and construction of the earth embankment. The time spent with BKS Consulting allowed me the opportunity to monitor drawings and designs as well as practice on Auto CAD.

TRANSFORMATION OF IDEAS INTO WORKING DRAWING & CONCEPTS. - That's what I do A passionate SOLIDWORKS professional with more than 3 years of experience in Engineering design and drafting field. I am... Read more

TRANSFORMATION OF IDEAS INTO WORKING DRAWING & CONCEPTS. - That's what I do A passionate SOLIDWORKS professional with more than 3 years of experience in Engineering design and drafting field. I am currently working as Manufacturing Engineer in leading Manufacturing Company in Ontario, Canada. Aviation Engineering (Mechanical) and Automated Manufacturing under my academics qualification, provides me with skills and knowledge of Designing & Manufacturing field. My capabilities include working from simple object designing to Factory layout in CAD. If you need help with Jig & Fixture design, Prototyping, Mechanical design & drafting and workplace design, HIRE ME. I would love to have a coffee with you and discuss innovative solutions for your project.

I am an industrial drafting specialist focused on creating clear and practical technical documentation for manufacturing. I help transform ideas, parts, and assemblies into precise drawings and 3D mo... Read more

I am an industrial drafting specialist focused on creating clear and practical technical documentation for manufacturing. I help transform ideas, parts, and assemblies into precise drawings and 3D models ready for production, assembly, or review. My services include: • 2D manufacturing drawings • 3D modeling of parts and assemblies • Exploded views and bill of materials • Technical documentation • CAD support for engineering and workshops I focus on clarity, precision, and real-world usability.

I am Ankit Bhimani, a detail-oriented automotive engineer. I have expertise in designing 3D and 2D models. I provide personalized attention throughout the whole process, from the prototyping/ideation... Read more

I am Ankit Bhimani, a detail-oriented automotive engineer. I have expertise in designing 3D and 2D models. I provide personalized attention throughout the whole process, from the prototyping/ideation to the final delivery. My Area of Expertise: # 2D Drawing using Solidworks, NX, or AutoCAD # 3D Modelling/Designing and drafting using Solidworks or NX # Rendering using Solidworks # Reverse engineering My Commitment: # On time Delivery # High quality work # Attention to detail # Refinement based on feedback

Mechanical Industrial Design Engineer -------------------------------------------------------------------- HI, Myself,Balram Sharma,working as Freelance Mechanical 3D Designer.I worked in many compan... Read more

Mechanical Industrial Design Engineer -------------------------------------------------------------------- HI, Myself,Balram Sharma,working as Freelance Mechanical 3D Designer.I worked in many companies in R&D Deptt. as a Design Engineer during my Industrial Journey. - I am a Skilled freelance Mechanical 3D designer with over 6.5+ year of experience in the Designing field. Dedicated to staying up-to-date on new techniques and procedures related to Mechanical 3D design. Excel at Using various software like Solidworks, Solidedge,AutoCAD and Creo Parametric. Managed multiple projects simultaneously. Excellent communicator able to work as part of a team or as the sole designer. - Technical knowledge of many software programs, such as Solidworks,Solidedge,AutoCAD and Creo Parametric.Can also work on Catia and Unigraphics.Strong communication skills allow me to understand what customer is looking for. -Excel at identifying problems and finding various solutions to fix the issue.Work well in a fast-paced and ever-changing environment.Self-discipline ensures I finish my work on time no matter how many projects I’m working on.I'm a Creative thinker able to come up with unique, clever ideas for logo design 3D. Can be available for you anytime,anywhere to solve your query related to CAD Design and any Mechanical Subject.I think bond between the Professional people's must be so strong that whenever there will be a problem,all must be come together to tackle the Problem. I,myself,as a sole Designer has given successful real working design of Internal Combustion Engine(Single Cylinder), Gear, Diggi Lock Cover, a Piston and a Crankshaft for Radial Engine(IC).I also provided design for a Rock Crawler Toy Machine for a Toy making Company. Thank you for consideration! Thank You again, Balram Sharma

I am an award winning international kitchen/bath and interior designer trained to the NKBA standard, specializing in concept designs and photo-realistic renderings using 20/20 design and Lumion10. I... Read more

I am an award winning international kitchen/bath and interior designer trained to the NKBA standard, specializing in concept designs and photo-realistic renderings using 20/20 design and Lumion10. I am trained by NKBA regulations and guidelines and I am always striving to excel in anything I choose. I am featured on 20/20 Design social media and my work is available in a portfolio upon request.

I am a 3D artist with over a decade of personal and professional experience. I supply artwork to clients around the world.

I am a 3D artist with over a decade of personal and professional experience. I supply artwork to clients around the world.

I am Graduated in Industrial Design & Drawing and I have chosen as best Inventor designer and participated in WorldSkills International in skill 05 Mechanical Engineering CAD. I'm also Autodesk Inven... Read more

I am Graduated in Industrial Design & Drawing and I have chosen as best Inventor designer and participated in WorldSkills International in skill 05 Mechanical Engineering CAD. I'm also Autodesk Inventor, CATIA, Autocad, KeyShot specialist. My CAD & Engineering services includes next: - Building 3D models and 2D drawings for manufacturing in Autodesk Inventor Professional, CATIA, SolidWorks and AutoCAD from concept sketches, drawings or other references. - Create 3D models from cloud point or digitized files for reverse engineering. - Create professional rendered images from modeled parts & assemblies with KeyShot. - Mechanical design and engineering, industrial design, plastic parts design, Surface design, Parametric design. - Frame structure design - Sheet metal design - Design core and cavity for any part for molding. - Create iPart & iAssembly, in Autodesk inventor. i is abbreviation of intelligent. - Create exploding and collapsing animation videos. - Create animation from functionality mechanisms. - Translation form on 3D CAD format to another, - Creating 3D files as STP, IGS, STL, SAT, DXF, etc for 3D printing/prototyping and laser cutting. - Modification of existing 2D drawings and 3D models, - Finite element analysis (FEA) of parts and assemblies, - Computational Fluid Dynamics CFD of parts and assemblies.

I am a Mechanical Design Engineer specializing in SolidWorks and 3D CAD modeling. I create high-quality mechanical parts, assemblies, product designs, technical drawings, sheet metal models, and manuf... Read more

I am a Mechanical Design Engineer specializing in SolidWorks and 3D CAD modeling. I create high-quality mechanical parts, assemblies, product designs, technical drawings, sheet metal models, and manufacturing-ready CAD files. I focus on accuracy, functionality, and delivering professional engineering solutions for prototypes and production.

"Mechanical engineering graduate from VNR-VJIET with expertise in CAD software and proficient project management skills. Experienced in data analysis and project execution. Adept at problem-solving, w... Read more

"Mechanical engineering graduate from VNR-VJIET with expertise in CAD software and proficient project management skills. Experienced in data analysis and project execution. Adept at problem-solving, with exceptional communication abilities and meticulous attention to detail. Successfully completed numerous academic and freelance projects, showcasing a track record of delivering high-quality work. As a freelancer, I offer comprehensive CAD services tailored to client needs, ensuring efficient project delivery and client satisfaction. Ready to leverage my skills and experience to tackle your CAD projects with precision and professionalism."

We work with passion and We love what we do. We will complete your work with our given deadline and maintaining the work quality. We’re offering: » Architecture planning, 3D Visualization & Interior/... Read more

We work with passion and We love what we do. We will complete your work with our given deadline and maintaining the work quality. We’re offering: » Architecture planning, 3D Visualization & Interior/Exterior Designing: » Architectural Design service , MEP work » BOQ for both interior and exterior » Autocad Floor plan, Elevation, section, and City Permit Drawings & Drafting. » Construction drawings, Building permit, Landscaping » 3D Architectural Visualizations - Exterior / Interior » 3D Modeling & Rendering, 3D Floorplan » Furniture Design and 3D Visualization » Walkthrough or Flythrough 3D Animation. » 3D modelling for 3d printing

i want to designer mechanical engineering. Iwork for 2d designn or 3d design part thank you

i want to designer mechanical engineering. Iwork for 2d designn or 3d design part thank you

Wsup there im a M.e major yes sirr i do cad design and product design im here to get me some bread so that i can travel a bit ( i also do cool project you can find them at https://github.com/diaxxu )

Wsup there im a M.e major yes sirr i do cad design and product design im here to get me some bread so that i can travel a bit ( i also do cool project you can find them at https://github.com/diaxxu )

Worked professionally in various industries, such as automotive, aerospace and defense. I created various prototypes, designs and drawings for manufacturing. Outside of my professional scope, I create... Read more

Worked professionally in various industries, such as automotive, aerospace and defense. I created various prototypes, designs and drawings for manufacturing. Outside of my professional scope, I created/prototyped an RC plane during college, so I have a wide range of design practicality and feasibility.

I graduate Mechanicala faculty in Sarajevo, 2013. I have worked on various projects, both 2D and 3D, as coffe mug design, metal stairs construction, and various mining and construction equipment. Also... Read more

I graduate Mechanicala faculty in Sarajevo, 2013. I have worked on various projects, both 2D and 3D, as coffe mug design, metal stairs construction, and various mining and construction equipment. Also, I have worked as a tool die engineer, for German automotive industry,(werkzeugbau konstrukteur), constructing ziehwerkzeug, beschneid and forming tools.