Hire the best custom part design experts for your company

Graduate in 2017 from University of Nebraska-Lincoln with a BA in Mechanical Engineering. I have been working as a design and production engineer since. I design parts to meet our customers requirem... Read more

Graduate in 2017 from University of Nebraska-Lincoln with a BA in Mechanical Engineering. I have been working as a design and production engineer since. I design parts to meet our customers requirements and also design jigs and fixtures for assemblies.

- Bachelor of Science in Mechanical Engineering. - Versatile with Inventor, SolidWorks, CREO. - Responsible for multiple electro-mechanical products such as lugs, terminals, braids, cable ties, c... Read more

- Bachelor of Science in Mechanical Engineering. - Versatile with Inventor, SolidWorks, CREO. - Responsible for multiple electro-mechanical products such as lugs, terminals, braids, cable ties, casted items in the workplace. - Always have a "can do" attitude. - 3 years of customer service experience.

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3... Read more

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.

I Have been working freelance for the past 2 years on various platforms. Successfully designed print-ready models for various applications including manufacturing, visualisation and product photo set-... Read more

I Have been working freelance for the past 2 years on various platforms. Successfully designed print-ready models for various applications including manufacturing, visualisation and product photo set-up. Professional Rendering is offered with excellent attention to detail just as needed. Capable of converting 2D sketches to 3D models with precise detail.

Experienced mechanical designing professional having a proven track record of over 5 years working in new product development cycles. Expert in SolidWorks, Inventor, 3D Printing and Injection Molding. Read more

Experienced mechanical designing professional having a proven track record of over 5 years working in new product development cycles. Expert in SolidWorks, Inventor, 3D Printing and Injection Molding.

I am skilled at designing parts and assemblies on smaller scale. I have experience designing parts to be cut on CNC or 3D printed but I am always looking to do something new. I have experience with pr... Read more

I am skilled at designing parts and assemblies on smaller scale. I have experience designing parts to be cut on CNC or 3D printed but I am always looking to do something new. I have experience with prototyping and designing my own custom tools for specific applications.

Design 3D Modeling Reverse Engineering 3D Printing Sheet Metal Tool and Die Fixture Design Gage Design Custom Part Design Read more

Design 3D Modeling Reverse Engineering 3D Printing Sheet Metal Tool and Die Fixture Design Gage Design Custom Part Design

I am Engr. Majid Dar, 𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿 with specialization in Product Design and Development. I have a professional background in Advanced Product Design, Manufacturing Ready CAD and Product... Read more

I am Engr. Majid Dar, 𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿 with specialization in Product Design and Development. I have a professional background in Advanced Product Design, Manufacturing Ready CAD and Product Visualization. I invite you to visit: " Majid-Dar.com " and view my recent work and engineering Portfolio Being a Professional Design engineer with a strong focus in the multiple skill sets that are required for product development, including 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴, 𝗗𝗲𝘀𝗶𝗴𝗻, 𝗖𝗔𝗗, 𝗥𝗲𝗻𝗱𝗲𝗿𝗶𝗻𝗴 𝗮𝗻𝗱 𝗣𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗶𝗻𝗴. My professional experience is dedicated to product development across multiple fields. I can quickly adapt to your project's specific needs. Whether you're looking to design an 𝗶𝗻𝗶𝘁𝗶𝗮𝗹 𝗰𝗼𝗻𝗰𝗲𝗽𝘁 𝘄𝗶𝘁𝗵 𝘀𝗸𝗲𝘁𝗰𝗵𝗲𝘀, 𝗖𝗔𝗗 𝗺𝗼𝗱𝗲𝗹𝘀 𝗮𝗻𝗱 𝗽𝗿𝗼𝘁𝗼𝘁𝘆𝗽𝗲𝘀 𝗼𝗿 𝗿𝗲𝗾𝘂𝗶𝗿𝗲 𝗮𝘀𝘀𝗶𝘀𝘁𝗮𝗻𝗰𝗲 𝗴𝗲𝘁𝘁𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗽𝗿𝗼𝗱𝘂𝗰𝘁 𝘁𝗼 𝗮 𝗺𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗮𝗯𝗹𝗲 𝘀𝘁𝗮𝘁𝗲, I have the experience and knowledge to help. With my skills and career-focused on 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘃𝗲𝗹𝗼𝗽𝗺𝗲𝗻𝘁 𝗮𝗻𝗱 𝗗𝗲𝘀𝗶𝗴𝗻 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴, not only can I help you obtain your end deliverables but also help you or your team with the development process. Having worked with a number of clients on planning out the steps for developing their new product, a good plan can result in a quicker turnaround on the finished design as well as reduce the development cost and financial risk for the client. I am open to all projects and have considerable experience in consumer, medical and industrial product development. For my CAD services, I have a SolidWorks License with access to all the latest software versions If you want your project completed before the deadline and better than your expectations, feel free to hit me up!! Cheers. All you need to do is scroll up to the top of this page, click on "invite to job" send me a quick message that provides a brief description of what you're looking for and I'll be in touch to discuss more. Looking forward to hearing more about your project and business goals for the future. Best Regards Engr.Majid Dar Keywords: Solidworks, Mechanical CAD, Prototyping, Custom Part Design, 3D Printing Models, PCB Enclosures, Product Enclosure, Physical Product Design, Product Designer, Industrial Design, Industrial Designer, Designer, Consumer Product Design, Product, Products, Products Designer, Design, Product, Designer, Industrial. Industrial industrial industrial industrial. Product Products Consumer Products Product. 3D CAD Design, CAD Design Design, 3D Design, 3D Solidworks, Sheet Metal Design, Prototype, 3D Printing

Promoted 3 times over 10 years working as a Design Engineer at The Boeing Company, providing Engineering work and production support for the new design of the drive system configuration of the Apache... Read more

Promoted 3 times over 10 years working as a Design Engineer at The Boeing Company, providing Engineering work and production support for the new design of the drive system configuration of the Apache AH-64E helicopter, also part of satellite team supporting new design work for the Joint Multi Role SB>Defiant (JMR) rotorcraft in conjunction with Sikorsky teams.

Helix Engineering is an ISO-certified Custom Aluminum Part Manufacturers with a focus on various sorts of Aluminum Parts and components. In response to market needs, we supply a variety of unique prod... Read more

Helix Engineering is an ISO-certified Custom Aluminum Part Manufacturers with a focus on various sorts of Aluminum Parts and components. In response to market needs, we supply a variety of unique product attributes. We offer a wide range of services to our customers, including testing, direct distribution, product design, production, and suppliers.

Experienced CAD design engineer specializing in custom solutions. 6 years of experience with strong technical knowledge plastic-metal part designs,machine constructions for private clients Read more

Experienced CAD design engineer specializing in custom solutions. 6 years of experience with strong technical knowledge plastic-metal part designs,machine constructions for private clients

I'm a Certified Mechanical Designer with over 10 years experience in equipment design. I am also a highly skilled user of Solidworks . I'm very familiar with custom product design from my years of wor... Read more

I'm a Certified Mechanical Designer with over 10 years experience in equipment design. I am also a highly skilled user of Solidworks . I'm very familiar with custom product design from my years of working in industry and I've always enjoyed innovative problem solving.

Mathematics and realization some external details for the scooter project "ECOCAR" - LIGHT for the Korean market. -Study feasibility and cross mathematics, mathematical development and design of detai... Read more

Mathematics and realization some external details for the scooter project "ECOCAR" - LIGHT for the Korean market. -Study feasibility and cross mathematics, mathematical development and design of details and overalls of the "IRAN SAIPA 132" bridge components. -Autovaz 2190 "feasibility and mathematical bumper math. - Mathematical development of project components "AUTOVAZ 2190", - Feasibility study, mathematical aesthetic door, storage compartment and relative drawer handle and mathematical development of project components "AUTOVAZ 2190" for Russia project "AUTOVAZ 2190" and 2D - feasibility study airbag mathematization of bridge components "IRAN SAIPA 211" -Study feasibility and design project door panels "IRAN SAIPA 211" .2D (DRAWING) assembly of 3D. - Feasibility study, aesthetic door math, storage compartment and relative drawer handle mathematical development of dashboard components and related subsequent modifications for the project "IRAN SAPCO P405" -2D dashboard (all components) + exploded dashboard + tunnel + bumper + head impacto "IRAN SAPCO P405" direct contact with customer. -2D dashboard (all components) + exploded plank + tunnel + trunk part + door panels (all components) + exploded door panels. -Study feasibility mathematics electric bike for the "TURKISH" + assembly all pieces + 2D. -The helicopter feasibility for China. -Fitnessability / electric bike for Trucchia. -Study mechanical table. Project: alpha romeo QV & Base 9520. (Ug 9 & iman) Project: 164 Ferrari. (Catia v5)

WELL COME TO TOOL TECHNOLOGIES we are "TOOL TECHNOLOGIES "( TOOL ROOM) CUSTOM PRODUCTS manufacturing and supplier of injection mold , rubber mold and molded components press tool and precisi... Read more

WELL COME TO TOOL TECHNOLOGIES we are "TOOL TECHNOLOGIES "( TOOL ROOM) CUSTOM PRODUCTS manufacturing and supplier of injection mold , rubber mold and molded components press tool and precision engineering components below industries 'INDUSTRIAL PRODUCT " "AUTOMOBILE PRODUCT " "ENGINEERING PRODUCT" "ELECTRICAL PRODUCT" "MEDICAL PRODUCT " PHARMACEUTICAL PRODUCTS " and many more industries as per client BLUE PRINT or SAMPLE at competitive price with using hi technologies and engineers and pls find some of our products Rubber & Plastic parts  RUBBER TO METAL BONDED PARTS  RUBBER ANTI-VIBRATION PADS  RUBBER TO PTFE/TEFLON BONDED PARTS  RUBBER MOUNTINGS  RUBBER DIAPHRAGMS / MEMBRANE  RUBBER GASKETS / SHEETS  RUBBER VIBRATION DAMPERS  RUBBER & PLASTIC BUSHES/  RUBBER BUFFERS  RUBBER & PLASTIC SEALS  RUBBER COUPLINGS /GROMMETS  RUBBER DRAIN MATS  RUBBER WATER PIPE SEAL  RUBBER BALLS  RUBBER & PLASTIC AUTO PARTS  RUBBER WHEELS / RING  RUBBER & PLASTIC BUMPSTOPS  RUBBER & PLASTIC ROLLERS  RUBBER & PLASTIC WASHERS  RUBBER ‘O’ RING  POLYURETHANE (PU) PARTS  PTFE / TEFLON PARTS TOOL TECHNOLOGIES nataraj ( C E O )

Machine Designer with 10 years experience designing, building, and installing custom assembly and test equipment. Equipment ranging from simple manual work cells, to part fixturing, to completely auto... Read more

Machine Designer with 10 years experience designing, building, and installing custom assembly and test equipment. Equipment ranging from simple manual work cells, to part fixturing, to completely automated assembly cells. Experience with leak testing using mass flow, pressure decay, and tracer gas methods.

• Custom manufacturing machine design • High speed packaging equipment • Pressure vessel stress analysis (ASME Section VIII-2) • Plastic part design (thermoforming, injection molded) • Sheet meta... Read more

• Custom manufacturing machine design • High speed packaging equipment • Pressure vessel stress analysis (ASME Section VIII-2) • Plastic part design (thermoforming, injection molded) • Sheet metal design • 3D printing model design • Solidworks CAD (Simulation Professional) • Autocad (DWG, DXF) • BsME

• Expert in 3D modeling in SolidWorks CAD Software • Expert in Part and Assembly drawings • Proficient in 2D drafting, Simulation and Rendering in SolidWorks • Expert in SolidWorks Inspection - genera... Read more

• Expert in 3D modeling in SolidWorks CAD Software • Expert in Part and Assembly drawings • Proficient in 2D drafting, Simulation and Rendering in SolidWorks • Expert in SolidWorks Inspection - generation of balloon prints and custom inspection reports • Experienced in 3D printing concept designs • Experienced in Product design (DFM & DFA) from concept stage to drawing release for manufacturing • Experienced in manufacturing processes with good understanding of machines

"Approved as Noted" -- "I Do This Everyday" -- "Review Services Below" Shop Drawings * ACM Aluminum Composite Panels - Wet/Dry/NOA * Insulated Wall Panels - Benchmark, Karrier Rail * Single Skin P... Read more

"Approved as Noted" -- "I Do This Everyday" -- "Review Services Below" Shop Drawings * ACM Aluminum Composite Panels - Wet/Dry/NOA * Insulated Wall Panels - Benchmark, Karrier Rail * Single Skin Pac-Clad, ATAS, MBCI, Wall Panels & Soffit * Aluminum Plate / Plant Screen / Custom Product Fabrication * ACM Fascia, Soffit, Wall Panels, & Column Covers Wet/Dry * Aluminum Plate (Wet/Dry) / Zinc, Copper Interlock Applications * Faro Scene Point Cloud Data Support sent back to CAD w/ Recap * 3d Part Development - Unfolded/ Exported via DXF * 3d/2d Tag Drawing Sets w/ Install Instructions for Field Installers Estimating Support ​* Material Take Off's from Approved Shop Drawings or Arch Set * True Part/Panel Footage for PM/Estimating Check/Compare * Stock Coil or Custom Runs w/ Waste Percentage Reports Technical * 100% Lossless PDF/PNG Data Compression * Shop Drawings in TC True Color * High Definition Publishing - 4800 DPI * Material Nesting Packages for Shop & Project Management * Company Job Portal w/ Project Download/Upload Section ​* Custom Template Development - Shop / Part Drawings * Title Blocks w/ Custom Logo Raster Development * Panel System & Custom Block Library Creation * Website Development / Graphics ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a mechanical engineer with more than 5 years of intensive design and draughting experience within the consulting,consumer products and industrial machinery sector, that is proficient in initiatin... Read more

I am a mechanical engineer with more than 5 years of intensive design and draughting experience within the consulting,consumer products and industrial machinery sector, that is proficient in initiating and developing mechanical conceptual design. I am skilled in Computer Aided Designing. I am technically skilled in the following software: NX 8.5, AutoCAD2010 Soliworks. I can handle all of your CAD needs including 3D, 2D, and file conversion. I work to design and develop models, detailed drawings, and assembly of prototypes using 3D and 2D Computer Aided Design packages. I'm happy to work alone or as part of a team to find the perfect solution to your project. I listen to your needs and then solve them. We can work together from concept development to final design or any other custom requests

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off... Read more

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off racecars and custom engineered cars. I've designed parts to be made using every manufacturing method, sheetmetal, 2d and 3d subractive, additive (SLA,FDM,SLS, etc.) and will make the necessary DFM decisions based on your needs. Every part i make will be 100% analysed for it's design specifications (FEA, CFD, etc) , with function and form developed for it's use case.

CAREER SUMMARY: ¬¬ • Mechanical engineer with 6.5+ years of experience in engineering services industry. • Products worked on Fire Trucks, Bus structure, Truck cabin • Areas product design, produc... Read more

CAREER SUMMARY: ¬¬ • Mechanical engineer with 6.5+ years of experience in engineering services industry. • Products worked on Fire Trucks, Bus structure, Truck cabin • Areas product design, product development, reverse engineering weight and cost reduction for commercial vehicle industry in Europe and US. • Expertise in Solidworks and Catia and have a good knowledge of creating 3-D models, assemblies and manufacturing drawings. • Successfully lead the team of 15+ engineers in CAD projects. 4+ years of experience in project management. • Possesses good communication, interpersonal, relationship management and coordination skills. Experience of working in cross-cultural and multi-lingual environment. • Currently working as a fulltime freelancer, worked for few Indian company o provide CAD and Manufacturing solutions. • Planes to open an engineering service provider company in next few months. Areas of expertise: ¬¬ • Product design. • Reverse engineering • Cost & weight reduction. • CAD projects. • Productivity Enhancement. • Project Management + Proposal making + Top line growth for Accounts. • Prototype Support. Relevant Past Experience: ¬¬ • CAD support: 1. Air deflector Kit Modeling for 6 different truck variants. 2. Fire truck parts re-modeling for US based client 3. Custom chassis / Trailer manufacturing for European customer. • Product Design: 1. Parts for interior (Truck Cabin) like Cover over door, Trim parts. 2. Cover for Cables and the Wastewater drain tube in the roof luggage racks 3. Noise development bunk. 4. LDWS and RLS: Improve the design such that LDWS can be fixed properly. 5. Support for Inner Fender-Material change -from steel to plastics. 6. Air vents for Bus inner ceiling so as to reduce number of toolings. 7. Modification in End cap - Guide Rail Curtain • Cost and weight reduction: 1. Tail lamp mounting bracket: 1.4 Kg to .4 Kg, material Cast iron to Aluminum profile part 2. Inner fender support : material change for weight reduction. My intention is to provide best class services at reasonable cost. I have few repeated clients, well satisfied with my quality of work. I can assure that i will give best quality of work and fast turnaround time. Ready to accept all kind of jobs, intersted in both hourly and fixed price jobs. I am willing to sign non-disclosure and IP assignment. I will offer better hourly rate for repeated clients. Looking for long-term clients. All types of CAD work can be undertaken, including, but not exclusively; • Converting sketches and drawings to 3D models, or converting AutoCAD to SolidWorks.or catia • Modifying existing 3D models. • Creating assemblies from new and existing models. • Producing drawings for manufacture and accurate BOM's. • Creating 3D part and assembly illustrations for product documentation. • Creating 3D part and assembly photorealistic renders and animations. • Reverse engineering. • Run Finite Element Analysis to help improve parts and assemblies. • Using advance SolidWorks techniques to speed up the design process such as design tables. Best Regards, Priyank

Hi, Muzammil here. i have expertise in 3D part modeling, plastic & die casting Mold designing, die designing, Jigs & Fixture design, 2D drafting of industrial level. Any other mechanical design relate... Read more

Hi, Muzammil here. i have expertise in 3D part modeling, plastic & die casting Mold designing, die designing, Jigs & Fixture design, 2D drafting of industrial level. Any other mechanical design related to machine or any equipment.

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling an... Read more

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling and testing of materials and their implementation. Previous designs in the field of aerospace engineering include the design of a high pressure air system required to test a flight vehicle in high altitude conditions. The high pressure air system required pressure vessels to sustain the operation of the test, and were calculated to be too costly, however using recycled vessels were considered. The recycled vessels then needed to be tested before being put into service on the system. This meant cutting several critical failure sections of the pressure vessel and sending it for tensile, compression, modulus lab data. This data would then need to be scrutinized to the calculated data based on pressure vessel code and good design practice, safety factors etc. The delivery system was then modeled in ProE Creo software to be delivered to in-house machinists for material ordering and assembly, but not until modeled in AnSYS modeling comparison. This system was successfully commissioned by a engineering team effort with my design engineering assistance. Creating databases to clearly log product data, quality reports, team performance, and work load is also one of my skills using Microsoft Office Access. The custom code i wrote in VBA to easily track and print weekly data that would be discussed at design meetings in an effort to improve overall team efficiency. Using ProE to design flight vehicles for test models was also a key piece of experience to tune my design experience in fluid dynamics. As the design went from pencil and paper theoretical calculations, they were transformed into models, later tested by my team and then a full size model delivered to the customer, NASA, for field testing. Many points of aeronautical engineering experience resides in the modeling done in ProE Creo/Wildfire to develop testing models. My mechanical engineering design experience comes from a firm mostly pitched towards the development of public & private schools. We design the mechanical, HVAC, electrical, plumbing and fire protection, and civil systems. All of the engineering is done "in the same house" as the architectural design. My experience circumvents all of the engineering trades in accordance with NYS education code, the supplements, and the current IMC. Designing systems in my current atmosphere allow for the full design to be implemented without value engineering the design like an EPC. Though EPC's are also part of the job. Mechanically, I have designed HW/Steam boiler rooms, AHU systems, VRF, and the like. My fire protection experience stemmed from my family business, meaning i physically installed many types of plumbing systems and fire protection systems; it is a critical component to influence my design practice in HASS and/or AutoCAD. Many engineers call it "the third eye." My plumbing design experience resides in all types of waste and domestic systems for commercial kitchens, assisted living facilities, schools, large residences and small, also churches. As much as possible, I use my local contacts in the gas, electrical and water utilities to make my designs as solid as possible. All of my MEP & FPE design are based on maintaining code requirements while not having the customer pay for unnecessary equipment etc.

As a multitask person I work on interior projects from a brief and initial measurements to 3D rendering (visualizations) and all blueprints. I also supervise the process of implementation the project... Read more

As a multitask person I work on interior projects from a brief and initial measurements to 3D rendering (visualizations) and all blueprints. I also supervise the process of implementation the project to reality: construction, engineering systems design, decoration, furnishing and custom furniture production. I work on interior and other spatial design projects: private apartments and houses, public spaces as a dental clinic, art-club, school, shop, street café etc. Product design projects mainly are as a part of interior projects: custom furniture and interior accessories. I also work on landscape projects of private gardens in collaboration with botanical specialists.

I’m a CAD designer working in the Theme Park Industry. Over the course of my career I have been a part of multiple large scale projects from initial phases through construction drawing sets. I am prof... Read more

I’m a CAD designer working in the Theme Park Industry. Over the course of my career I have been a part of multiple large scale projects from initial phases through construction drawing sets. I am proficient in using multiple design software packages and can readily handle non-typical or custom designs with my background, knowledge of fabrication methodology and materials.

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored prod... Read more

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored product, model and render a new product or concept, produce RFQ-ready technical drawings with full GD&T, or develop quality, easy-to-use tooling/jigs/fixtures for your manufacturing line, I can do it! I am a Certified SolidWorks Professional and an expert in Fusion360 - licenses for both of which I own. In particular, I excel at building parametric, equation-driven models and design tables at the part, sub-assembly, and top-level assembly levels. I am also experienced at parametrically linking Solidworks drawings for automatic information updates. My manufacturing experience includes injection molding, thermoforming, extrusion, acoustic felt, sheet metal, steel/concrete pipe, additive manufacturing, 3-axis CNC, and product assembly. I've reverse-engineered, designed, and revised hundreds of custom products and tools. I have worked the production floor myself, so I know what to look for and ask about when designing for production. I can build small- to mid-size mechanical prototypes, such as a small prototype refrigerator that I designed and built in the second half of 2022. I have the ability to produce parts via FFF printing. I can also assist you in locating quality vendors for tooling and production. Certifications: Certified Solidworks Professional in Mechanical Design (CSWP-MD) C-8SKX4GBT3R Certified Solidworks Professional Advanced - Sheet Metal (CSWPA-SM) C-F67ZHEX3WR Certified Solidworks Professional Advanced - Drawing Tools (CSWPA-DT) C-UA37YPGQKM Solidworks PDM Professional, by GoEngineer.