Hire the best freelance BIM 360 GLUE expert designers for your company

-5 years of MEP BIM modeling and coordination experience in NYC. -Specialized in Plumbing and Sprinkler coordination and shop drawing preparation for use in construction. -High rise residential, comme... Read more

-5 years of MEP BIM modeling and coordination experience in NYC. -Specialized in Plumbing and Sprinkler coordination and shop drawing preparation for use in construction. -High rise residential, commercial and educational buildings. Completed projects vary from 8 stories to 60 stories. - Ability to translate single line MEP design drawings to full 3D models for construction. - penetration drawings, horizontal overhead drawings, 3D sketches for construction

Masters & Bachelor Degree in Architecture, work experience of 3 years in BIM background, have been involved in various freelancing projects in the past 2 years, Currently working in a BIM outsourcing... Read more

Masters & Bachelor Degree in Architecture, work experience of 3 years in BIM background, have been involved in various freelancing projects in the past 2 years, Currently working in a BIM outsourcing company as BIM Coordinator (VDC Engineer). Specialities and Services to Offer: Architectural Renderings. (Sketchup, Autodesk Revit, Vray, Sketchup, Lumion) MEP Modelling & Architectural BIM Modelling (Autodesk Revit) Laser Scan to BIM Modelling (Autodesk Revit) Clash Detection & I Construct Clash Report Making (Navisworks Manage, i-construct Report) Client satisfaction is my top priority and that's why I don't accept a job that I am not 100% capable of doing. Send me a message and we can start working on your project.

I am Structural engineer and also Autodesk Revit Certified Professional. I have won the National Level BIM challenge organized by Autodesk. I have been working on the projects like Sustainable Library... Read more

I am Structural engineer and also Autodesk Revit Certified Professional. I have won the National Level BIM challenge organized by Autodesk. I have been working on the projects like Sustainable Library, mall, hospital, residential tower, guest house and many more. I am working in this industry from past 4 years and have successfully delivered many of the projects in those 4 years. Also my skills are not restricted to Revit but I am equally competent in most of the BIM softwares namely Navisworks, sketch up, etabs, staad, civil 3D and many more. I make sure my clients feel very comfortable with me so that we can work on long terms in future, so client satisfaction is uttermost for me.

I have over 20 years of experience working in Revit and AutoCAD. Advanced experience drawing site plans, floor plans, elevations and sections, detailed setting out and details for kitchens and bathroo... Read more

I have over 20 years of experience working in Revit and AutoCAD. Advanced experience drawing site plans, floor plans, elevations and sections, detailed setting out and details for kitchens and bathrooms. Advanced experience drawing/modelling building services systems and full 3D services coordination. Advanced knowledge in designing public health systems (Drainge, Water Supply, Rainwater).

I am an Architectural Designer and Drafter with 7 years of experience working across residential, commercial, educational, and industrial logistics projects. My daily workflow relies on three core sof... Read more

I am an Architectural Designer and Drafter with 7 years of experience working across residential, commercial, educational, and industrial logistics projects. My daily workflow relies on three core software tools: Autodesk Revit, AutoCAD, and the Adobe Creative Suite, which support both technical documentation and visual communication. My professional practice is defined by my ability to produce architectural plans, construction details, 3D models, renderings, and visual presentations, as well as my direct involvement in SD–DD–CD project phases. I contribute solid technical execution while supporting design development and multidisciplinary coordination. I describe myself as detail-oriented, adaptable, curious, and proactive. I excel at time management and thrive in fast-paced environments. My professional strengths include technical drawing, 3D modeling and rendering, as well as visual communication for presentations and client-facing deliverables.

Hire me now!! and be my first client. I 100 % assure you of best quality delivery. [🌟🌟🌟🌟🌟] Trying to escape the corporate world and delve into freelancing. I am a Mechanical Design Engineer sp... Read more

Hire me now!! and be my first client. I 100 % assure you of best quality delivery. [🌟🌟🌟🌟🌟] Trying to escape the corporate world and delve into freelancing. I am a Mechanical Design Engineer specializing in aircraft interiors, product development, and advanced mechanical systems. With 4+ years of experience, I have worked on aircraft seating, ergonomic cabin layouts, lightweight structures, and precision mechanical components. I offer CAD modeling, design optimization, and simulation services for aerospace, automotive, and industrial products. Using CATIA V5, DMU Kinematics, and GD&T, I create functional, manufacturable, and high-performance designs that meet industry standards. 🔹 Services I Offer: ✅ 3D CAD Modeling & Assembly Design (CATIA V5, SolidWorks) ✅ Aircraft Interiors & Seating System Design ✅ Kinematics & Motion Simulation (DMU, Mechanism Analysis) ✅ Finite Element Analysis (FEA) & Structural Optimization ✅ Product Prototyping & Manufacturing Support 🌍 Industries I Work With: ✦ General Mechanical Design (Prototyping, 3D Printing, Manufacturing) ✦ Aerospace & Aviation (Cabin Interiors, Seating, Structural Design) ✦ Automotive (Lightweight Components, Ergonomic Design) I am passionate about solving engineering challenges and delivering high-quality designs that enhance efficiency and functionality. If you're looking for precision, creativity, and engineering expertise, let's collaborate! 📩 Contact me for your next project! 🚀

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Professionally managed company with experience in handling various projects from CAD Modelling, Product design, prototype to visualization.

Professionally managed company with experience in handling various projects from CAD Modelling, Product design, prototype to visualization.

Industrial Designer - 3D CAD Modeller, Product Designing. Educated, passionate and ambitious individual with knowledge of different designing softwares and good communication skills. I have a... Read more

Industrial Designer - 3D CAD Modeller, Product Designing. Educated, passionate and ambitious individual with knowledge of different designing softwares and good communication skills. I have a great passion for CAD designing and product designing. I have a great understanding of the steps needed to make a CAD model. I have specialized in : - 3D Modelling - 2D Drawings - Product Design - CAD Design - 3D CAD Animations

Freelance Industrial & Product Designer - 3D Modeling - Rendering www.mu-industrialdesign.com

Freelance Industrial & Product Designer - 3D Modeling - Rendering www.mu-industrialdesign.com

I am a Mechanical and Manufacturing Engineer with over 10 years of experience in industrial machine design, automation systems, and manufacturing equipment development. I specialize in designing cust... Read more

I am a Mechanical and Manufacturing Engineer with over 10 years of experience in industrial machine design, automation systems, and manufacturing equipment development. I specialize in designing custom machines and automation solutions using SolidWorks for industries such as rubber processing, glove dipping, garment manufacturing, and paper converting. My services include: • Industrial machine design • Automation system development • Complete production line layout design • Mechanical assemblies and mechanisms • Conveyor systems and material handling equipment • Engineering drawings and manufacturing documentation • Concept to total plant design I help companies transform ideas into intelligent machines that are ready for manufacturing and industrial use.

I have experience in ANSYS APDL, Solid works,Fusion 360 and Inventor. I am a Mechanical engineering student currently in my final year.

I have experience in ANSYS APDL, Solid works,Fusion 360 and Inventor. I am a Mechanical engineering student currently in my final year.

I am a Mechanical Engineer, with Masters in Renewable Energy Technology. I am interested in 3D design and CAD design of Mechanical Parts and Complex geometries. I have completed my CSWA certification... Read more

I am a Mechanical Engineer, with Masters in Renewable Energy Technology. I am interested in 3D design and CAD design of Mechanical Parts and Complex geometries. I have completed my CSWA certification on Mechanical Design.

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years exp... Read more

I take great pride in the design work I create and always strive to deliver an effective, focused and on-target product that fits my clients' needs and goals. My background consist of 20+ years experience in multimedia graphic design, with a Bachelor's degree. My experience allows me to have a quick turnaround and the highest quality for all my clients. I produce work in Print, Video, 3D Modeling and Animation, 2D animation, Presentations (PowerPoint and PDF), Web and other mediums. Online Portfolio: https://www.behance.net/wsfuller Walter Fuller

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manuf... Read more

Mindful professional with a demonstrated history of turning ideas into physical products. My work goes much deeper than making a pretty 3D model; I listen to my customers and help them develop a manufacturable product that meets their specific goal. Based on your needs, you may choose from any number of the following services: - Concept Development - 3D Modeling & Rendering - Mechanical Analysis - Drawings & Documentation - Fabrication Sourcing - Consulting Certifications: Bachelor of Science in Mechanical Engineering - Valparaiso University, 2011 Certified SolidWorks Professional

Mechanical Engineering Student Medical Research Lab CAD specialist I love and have a strong passion for creating things with CAD software!

Mechanical Engineering Student Medical Research Lab CAD specialist I love and have a strong passion for creating things with CAD software!

Architect graduated in 2015 with experience in various aspects of the profession, from on-site work to the development of technical executive plans for new construction, rehabilitation, remodeling, an... Read more

Architect graduated in 2015 with experience in various aspects of the profession, from on-site work to the development of technical executive plans for new construction, rehabilitation, remodeling, and restoration, as well as interior design.

I am proficient in CAD modeling using Solidworks, autocad, creo, catia,nx and rendering can also be made. I have experience in designing the material handelling equipments. Expertise in creo , solid w... Read more

I am proficient in CAD modeling using Solidworks, autocad, creo, catia,nx and rendering can also be made. I have experience in designing the material handelling equipments. Expertise in creo , solid work and simulations in solidworks .

-Mechanical Engineering Professional with 5+ years of R&D experience -Expert in 3D CAD for manufacturing, industrial product design & prototyping -Designed real-world systems: cooling towers, gearboxe... Read more

-Mechanical Engineering Professional with 5+ years of R&D experience -Expert in 3D CAD for manufacturing, industrial product design & prototyping -Designed real-world systems: cooling towers, gearboxes, hydraulic machines, etc. -Provide complete design-to-production packages: 3D models, simulations, BOM, manufacturing docs -Skilled in automation & robotics -Strong background in embedded systems -Cross-functional collaboration with manufacturing, supply chain & marketing teams -Focused on delivering practical, production-ready solutions

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup upda... Read more

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup updates. I did several projects for Water treatment plants, Flour mills, power plants. INTERIOR Designer : Space Planning, Color Schemes, Materials, Furniture and Decor ideas. I dis several designs for home interior, furniture and wood works on special needs.

I am a 2017 graduated mechanical engineer from India. I have always preferred practical learning with theory. With great taste in design and product conceptualizing, I have completed many projects bot... Read more

I am a 2017 graduated mechanical engineer from India. I have always preferred practical learning with theory. With great taste in design and product conceptualizing, I have completed many projects both in academic and non-academic fields. Currently working on my own startup and here for extra money to pull out subsistence living expenses.

* I Had done B.Tech in Mechanical Engineering. * My key skills are SolidWorks, AutoCAD. * I also can make the 3 D program for VMC using SolidWorks CAM. * My recent projects are Wheel mounted break dis... Read more

* I Had done B.Tech in Mechanical Engineering. * My key skills are SolidWorks, AutoCAD. * I also can make the 3 D program for VMC using SolidWorks CAM. * My recent projects are Wheel mounted break disc for Vande Bharat (Train 18) for Indian Railways.

I enjoy solving complex problems and designing new products.

I enjoy solving complex problems and designing new products.