Hire the best freelance Bentley SewerGEMS expert designers for your company

He has extensive experience across a range of hydraulics, water distribution networks, computational fluids dynamics (CFD), water quality, transients (surge), and water/wastewater treatment plants hyd... Read more

He has extensive experience across a range of hydraulics, water distribution networks, computational fluids dynamics (CFD), water quality, transients (surge), and water/wastewater treatment plants hydraulics. Also, he has experience in many engineering software such as WANDA, HAMMER, Flow 3D, Autodesk CFD simulation, Infoworks ICM, Micro-drainage, WaterGEMS, SewerGEMS, Strom CAD, Civil 3D, Infraworks, Flow-master, Culvert Master, EPANET…etc

Skilled in AutoCAD REVIT SewerGEMS Engineering Water Sewerage design. Firefighting system design. Plumbing Design and Drawings. AutoCAD drafting.

Skilled in AutoCAD REVIT SewerGEMS Engineering Water Sewerage design. Firefighting system design. Plumbing Design and Drawings. AutoCAD drafting.

I am an undergraduate civil Engineer at Cairo University, EGYPT in my final academic year. I am open-minded to any suggested new versions of projects that you want to make. I am passionate student tha... Read more

I am an undergraduate civil Engineer at Cairo University, EGYPT in my final academic year. I am open-minded to any suggested new versions of projects that you want to make. I am passionate student that seeks to learn and make use of every single day. I was a trainee for 6 months in the last vacation in the shop drawings engineering company as well as in Talaat-Imam consulting company for water and sewer networks and design of main force line.

Highly accomplished WASH Officer and Civil Engineer with 12+ years of comprehensive experience managing, designing, and optimizing large-scale water and sanitation infrastructure projects. I hold an M... Read more

Highly accomplished WASH Officer and Civil Engineer with 12+ years of comprehensive experience managing, designing, and optimizing large-scale water and sanitation infrastructure projects. I hold an MSc. in Urban Water Engineering and Management from IHE-Delft/AIT, specializing in climate-resilient water systems and complex network modeling. I deliver specialized freelance services across three key areas: Hydraulic Modelling & Optimization: Expert-level simulation and analysis for water distribution networks (WaterGEMS/WaterCAD) and wastewater systems (Sewer CAD/Sewer GEMS). Infrastructure Design & Drafting: Production of detailed, construction-ready 2D/3D CAD drawings (AutoCAD) and complete technical documentation (BoQs, Specifications) for water supply systems, pumping stations, and urban drainage. Project & Design Review: Independent, professional review of engineering designs, tender documents (including FIDIC contracts), and Environmental/Social Impact Assessments (ESIA) for international and governmental clients. My proven track record includes leading projects serving up to 250,000 populations in urban, rural, and refugee contexts, ensuring sustainable and safe water access.

I am civil engineer with a great back ground in plumbing engineering, infrastructure and firefighting design fields, i have worked in several projects with INFRA Group Consultants, AMER group and Wadi... Read more

I am civil engineer with a great back ground in plumbing engineering, infrastructure and firefighting design fields, i have worked in several projects with INFRA Group Consultants, AMER group and Wadi Degla clubs in plumbing, water&sewer networks and firefighting designing projects. Using professional engineering software such as: AutoCad, Civil 3D, WaterGems, SewerGems, StormCad and Pipe2Cad

Hydraulic Modeler with 8+ years of hands-on experience in modelling, analyzing, and designing water supply, sewerage, and UGPL irrigation systems. Proficient in Bentley Hydraulic Modelling tools, incl... Read more

Hydraulic Modeler with 8+ years of hands-on experience in modelling, analyzing, and designing water supply, sewerage, and UGPL irrigation systems. Proficient in Bentley Hydraulic Modelling tools, including SewerGEMS and WaterGEMS, with strong expertise in network optimization, L-section preparation, pressure zoning, head-loss analysis, and scenario management. Skilled in GIS and design platforms such as QGIS, AutoCAD, and Civil 3D for data processing, layout preparation, and spatial analysis. Experienced in delivering DPRs, technical reports, and client presentations for government and consultancy projects. Known for accuracy, problem-solving ability, and capability to manage complete design workflows from data collection to final approval.

I am a skilled professional in AutoCAD Civil 3D, GIS, and Remote Sensing, with experience in infrastructure design support, digital mapping, spatial data analysis, and building information modeling (B... Read more

I am a skilled professional in AutoCAD Civil 3D, GIS, and Remote Sensing, with experience in infrastructure design support, digital mapping, spatial data analysis, and building information modeling (BIM) using Autodesk software. I specialize in road alignments, grading, earthwork calculations, and utility network modeling, as well as GIS services including map digitizing, georeferencing, spatial analysis, and data conversion between CAD and GIS formats. I also apply remote sensing techniques to analyze geographic and environmental data, enhancing project accuracy and decision-making. I deliver high-quality work with fast turnaround, clear communication, and a strong commitment to meeting client requirements.

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling,... Read more

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling, storm water management planning, water supply systems and modeling, non-revenue water reduction strategies, subsurface utility engineering, municipal engineering, urban planning, transportation and project management. He has been involved as Civil Engineering Lead and Utility Design Lead on a number of projects, having extensive project cycle experience, from front-end studies to full EPCM / EPC mandates as well as P3 Design Build Projects, including planning, design, construction, and installation phases in complex, time-sensitive environments.

Civil Engineer (B.Tech, 2019) with professional experience in Water & Wastewater Non Infra, Civil Engineer and Hydraulic Modeller across rural and urban projects. Currently working as a Civil Enginee... Read more

Civil Engineer (B.Tech, 2019) with professional experience in Water & Wastewater Non Infra, Civil Engineer and Hydraulic Modeller across rural and urban projects. Currently working as a Civil Engineer & Hydraulic Modeller – Water & Wastewater delivering Civil Engineer and hydraulic uing Bentley WaterGEMS, InfoWorks ICM, SewerGEMS Interface, EPANET, AutoCAD, Revu Bluebeam, ProjectWise (CDE), Civil 3D Interface, Google Earth, Ms Words and MS Excel. Experienced in: • DIAs (Development impact assessment wastewater modelling) • Civil Engineer (Topo Survey Specs, Construction Design Management [CDM 2015], Checked drawing sheets quality, consistency, spelling etc • Network modelling, water transmission, rising main & distribution systems • Detailed or Technical project reports preparation & technical documentation • Pumping stations, wastewater treatment plant layouts and preparation design and technical projects report • Sustainable infrastructure development Proven ability to contribute to multi-disciplinary engineering projects with strong analytical skills, technical precision, and documentation efficiency. Open to global opportunities in Water and Wastewater Non Infra

My goal is to provide high-quality, efficient, and accurate drafting and design services on Cad Crowd, leveraging my expertise in AutoCAD and Civil 3D. I specialize in grading design and civil enginee... Read more

My goal is to provide high-quality, efficient, and accurate drafting and design services on Cad Crowd, leveraging my expertise in AutoCAD and Civil 3D. I specialize in grading design and civil engineering drafting, with a strong focus on delivering precise topographic modeling, site grading plans, and earthwork calculations. I aim to collaborate with clients on innovative and cost-effective design solutions that meet project standards and exceed expectations.

• I have experience more than 15+ years in Highway design, Transportation planning, management of highway projects. Geometric design of urban and rural highways, intersections and interchanges, by Civ... Read more

• I have experience more than 15+ years in Highway design, Transportation planning, management of highway projects. Geometric design of urban and rural highways, intersections and interchanges, by Civil 3D & 12d software’s in Geometric design and developing Plans & Profiles, Cross Sections, computing earthwork quantities. Pavement structural design by MPW-Kuwait, and ASSHTO methods Review and checking Traffic studies, with using HCM methods for capacity analysis, application of Synchro 8 , SimTraffic 8 and SIDRA softwares.

I am a Civil engineer (S.P University, V.V. Nagar, Anand) holding master's degree in Environment Engineer ( M.S. University, Baroda). In my years of Experience, I have worked on Design Water Supply ne... Read more

I am a Civil engineer (S.P University, V.V. Nagar, Anand) holding master's degree in Environment Engineer ( M.S. University, Baroda). In my years of Experience, I have worked on Design Water Supply networks, Sewerage networks & Storm Networks. I have excellent knowledge of following software products: Auto cad, Bentley WaterGEMS, SewerGEMS, Storm cad, Excel, Word etc.

I am a Civil Engineer working as a Infrastructure Design Engineer for 1 year + counting . I can design Pressurized Supply Distribution Networks (Water, Fire and Irrigation) and Gravity Networks (Sewer... Read more

I am a Civil Engineer working as a Infrastructure Design Engineer for 1 year + counting . I can design Pressurized Supply Distribution Networks (Water, Fire and Irrigation) and Gravity Networks (Sewerage and Storm) using a vide array of softwares.

I am a Civil Engineer working as a Infrastructure Designer for 3 years + counting. I am also doing Masters in Water Resources and Irrigation Engineering and have a command over a variety of Infrastruc... Read more

I am a Civil Engineer working as a Infrastructure Designer for 3 years + counting. I am also doing Masters in Water Resources and Irrigation Engineering and have a command over a variety of Infrastructure Design Softwares.

Graduate of the Art Institute of Houston with Best In Show. I have several years working as a freelancer with a number of studios and meeting expectations.

Graduate of the Art Institute of Houston with Best In Show. I have several years working as a freelancer with a number of studios and meeting expectations.

- I have worked on several projects such as building 3D models of houses, supermarkets, office buildings, MEP systems of industrial plants, civil works on the file point cloud platform. - I can simul... Read more

- I have worked on several projects such as building 3D models of houses, supermarkets, office buildings, MEP systems of industrial plants, civil works on the file point cloud platform. - I can simulate 2D files, PDFs, images, and point clouds to 3D models. In particular, I can create variable family Revit lines. + I receive files, data, and project information from the vendor's 3D scanner, convert them to RCS files by software Recap and then link them all into Revit to do the modeling. Based on my ability to use Revit, I simulate what from the description scanner to redraw the object in the project according to each supplier's requirements. To do this job requires me to be careful and to be able to estimate as accurately as possible from point cloud data. + I created a file 3D model “industry park wastewater treatment plant” which I operated based 2D Autocad file. In the factory that I created including construction items, MEP systems, and a few devices family I researched to make variations in response to the dimensions of the catalog by software Revit.

My two greatest projects are the creation of a multi social network platform and automatic robots for the financial industry . A lot of 3D design in the middle of these two .

My two greatest projects are the creation of a multi social network platform and automatic robots for the financial industry . A lot of 3D design in the middle of these two .

18 years of Mechanical Engineering including heavy machinery design, reverse engineering, material handling equipment, hydraulics, PLC automation, high pressure pumps, and aircraft cabin interiors. E... Read more

18 years of Mechanical Engineering including heavy machinery design, reverse engineering, material handling equipment, hydraulics, PLC automation, high pressure pumps, and aircraft cabin interiors. Experienced with GD&T, Solidworks, Autodesk Inventor, and AutoCAD. Pictures or more details about specific project experience is available upon request.

I am a mechanical engineering graduate with hands-on experience in CAD design and modeling using Fusion 360. Skilled in creating precise 3D models, assemblies, and technical drawings, I combine engine... Read more

I am a mechanical engineering graduate with hands-on experience in CAD design and modeling using Fusion 360. Skilled in creating precise 3D models, assemblies, and technical drawings, I combine engineering principles with practical design solutions. My strengths include attention to detail, problem-solving, and rapid prototyping. I have worked on personal CAD projects that demonstrate my ability to bring concepts to life efficiently and accurately.

A licensed Architect for 5 years with diverse experience in space planning, 3d modeling and design supervision of several buildings, such as hotels, commercial building, residential, clinics etc.

A licensed Architect for 5 years with diverse experience in space planning, 3d modeling and design supervision of several buildings, such as hotels, commercial building, residential, clinics etc.

Graduate Engineer with 10 year experience in Designing and development of Tools (Assembly and Inspection Fixture) and Die, Mold for Aerospace & medical company (AS9100 CAT D) company.

Graduate Engineer with 10 year experience in Designing and development of Tools (Assembly and Inspection Fixture) and Die, Mold for Aerospace & medical company (AS9100 CAT D) company.

Designs tools, dies, and special guiding and holding devices that enable machines to produce a variety of products the Owen uses daily.  Designs metal molds for die casting and for molding plastics.... Read more

Designs tools, dies, and special guiding and holding devices that enable machines to produce a variety of products the Owen uses daily.  Designs metal molds for die casting and for molding plastics.  Designs prototypes of parts, and then, working with engineers and designers, determines how best to manufacture the part.  Repairs worn or damaged tools, dies, gauges, jigs, and fixtures.  Programming and Setting for CNC Milling Centers, CNC Turning and Wire-Cut EDM. Computer Skills  Windows, Ms. Office, Internet skills  Computer-Aided Design (CAD) Programs Unigraphics(NX), SolidWorks(Stress analysis): Excellent Matlab, Inventor, Catia: Very Good AutoCAD Mechanical: Very Good  Computer-Aided Manufacturing (CAM) Programs Delcam PowerMill: Very Good Unigraphics (NX) (Milling-Turning-EDM): Very Good Delcam for SolidWorks (Milling-Turning-EDM): Excellent Language Skills  Arabic: Mother Language.  English: Very Good (reading, writing & speaking). Additional Information  Certification in MINI-MBA at ASG (Ahram Security Group).  Lean Manufacturing Mini-Course at ASG.  SMED at ASG.  Certification in Communication skills at Zedny (Human Development Division).  Certification in planning at Zedny (Human Development Division).  Certification in recognition of successfully completing The General English Course, Pre-Intermediate Stage, Level 10 at America-Mideast Educational and Training Services, Inc. (AMIDEAST).  I have a current, clean Driving License.

I am very sincere and responsible for my work. I work very carefully. I give my 100% for complete my work. There has no example my client faced problem for me they was always satisfies for my work and... Read more

I am very sincere and responsible for my work. I work very carefully. I give my 100% for complete my work. There has no example my client faced problem for me they was always satisfies for my work and the continued work with me. Till now i worked in hospital, Polyclinics, Office . There had government and non- goverment work. If you will work with me you will be very satisfy & there will be more work between us. If i can play a role for your company development i will be very satisfy. Please hire me for your company development.

Retired Electromechanical Design Engineer with 33+ Patents seeking part-time (

Retired Electromechanical Design Engineer with 33+ Patents seeking part-time (