Hire the best freelance Basic Electronics expert designers for your company

I have worked in the Controls field for over 30 years. My primary focus has been control panel and system design using AutoCad software and the associated PLC and HMI programming to go with it. I ca... Read more

I have worked in the Controls field for over 30 years. My primary focus has been control panel and system design using AutoCad software and the associated PLC and HMI programming to go with it. I can provide electrical drawings in AutoCad or AutoCad Electrical. PLC and HMI programming can be completed in Allen Bradley, Omron, Unitronics, Wago and Automation Direct. I also have experience in designing small PCBs for custom applications within these automation projects. I have developed multiple projects using Arduinos and Raspberry Pis.

Results-driven Electronics Engineer with over four years of experience delivering robust PCB designs and embedded firmware solutions.Detail-oriented Electronics Engineer with a proven four-year track... Read more

Results-driven Electronics Engineer with over four years of experience delivering robust PCB designs and embedded firmware solutions.Detail-oriented Electronics Engineer with a proven four-year track record in developing complete hardware and software systems.

In any robotics or embedded system project, hardware design is the backbone of success. A single design mistake can cause failures, but a well-structured circuit and PCB can maximize performance, reli... Read more

In any robotics or embedded system project, hardware design is the backbone of success. A single design mistake can cause failures, but a well-structured circuit and PCB can maximize performance, reliability, and efficiency. If you want to enhance your robot’s performance or ensure your control system runs smoothly — you’re in the right place! I’m Reem, an Electronics & Communications Engineering student with strong interest and hands-on experience in circuit design and PCB layout. I’ve worked on multiple projects using ESP32, Arduino, IR sensors, and motor control, where I handled schematic design, PCB layout, and manual fabrication. Alongside my technical background, I also support clients with professional document design, including Word files, PowerPoint presentations, and Canva slides — perfect for showcasing your technical work or training content clearly and attractively. 🔹 Services I Provide: Circuit design & simulation PCB layout (single & multi-layer) Component selection & datasheet analysis Embedded systems integration (ESP32, Arduino, microcontrollers) Preparing training materials & educational content Technical writing & structured documentation Designing Word and PowerPoint files with clear, professional formatting I aim to deliver reliable, well-documented, and organized work, with clear communication and a client-focused approach to ensure satisfaction and high-quality results. Let’s talk about your project! I’d love to understand your idea and help you turn it into a practical, efficient hardware solution. Feel free to reach out. I’m always happy to discuss your goals and suggest the best path forward.

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Specia... Read more

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Special Mastery in ALTIUM. Executed more than 500 projects 2. Proficient in using industry-standard design tools such as Altium Designer, EAGLE, KICAD, EASYEDA and PROTEUS, ensuring accurate and efficient circuit development. 3. IPC Certified Symbols and footprints Creation, High Speed PCB Design upto 5GHz 4. Multilayer PCB Design experience upto 32 Layers, Impedance Control, Length Matching, Antenna Tuning, Blind Vias, Buried Vias, Through Hole Vias 5. DFX(Design for Excellence) - DFA, DFM and DFT. First Time Right PCB - 98% 6. Compact PCB Design, Signal Integrity, Power Integrity, Single Sided, Double sided placement 7. Design Verification through Design Checklists ensuring robust, reliable and quality design 8. Applications- IOT, Consumer, Medical, Industrial, Defense etc 9. Microcontroller Interfacing - STM32, STM8S, ESP32, ESP8266, NXP, TI chipsets etc 10. Wireless Products, Battery Operated, Low Power, Low cost 11. Design Optimization - Could optimize design of any product by at least 25% 12. Design for Quality, Design Review 13. PCB Prototyping, Contract Manufacturing 14. Firmware Development - ARDUINO, C, C++ etc 15. Enclosure Design, 3D Printing, Sheet Metal, 16. Production Support 17. EMI EMC Compliant Design - RE, EMHF, Surge, EFT, Burst, Impulse, 35KV 18. Standards Experience - UL, CISPER, CE, Please contact me if you would like to develop a robust and reliable product If you are looking to bring your idea to life, contact me :)

I am a passionate designer with a keen eye for detail and a love for all things design. With 6 years of experience in the industry, I have had the opportunity to work on a diverse range of projects, f... Read more

I am a passionate designer with a keen eye for detail and a love for all things design. With 6 years of experience in the industry, I have had the opportunity to work on a diverse range of projects, from art-orientated projects to structured client-orientated design projects, personally and collaboratively. My goal is to create innovative and visually stunning designs that meet clients’ objectives, evoke emotion, and engage the audience. I believe that design has the power to transform the world. I am constantly inspired by the intersection of art and functionality, and I strive to create designs that are not only aesthetically pleasing but also purposeful and user-centric. I am a firm believer in the importance of research and understanding the target audience, as it allows me to tailor my designs to their needs and aspirations. When it comes to approaching design projects, I believe in a collaborative and iterative process. I enjoy working closely with clients, understanding their goals and aspirations, and translating them into visually compelling designs. Throughout the project, I prioritize effective communication and feedback to ensure that the final result aligns with the client's vision and exceeds their expectations. Areas of Expertise: - Concept Development - Research & Development - Sketching - 3D Modeling (CAD) - Prototyping - Basic Electronics & Coding - Mould Design - Digital Rendering - Brand Design & Development - Technical/Manufacturing Drawings

I’m a Mechanical Design Engineer with a passion for creating designs that look good, work well, and are built to last. I’ve worked on a variety of projects, from consumer gadgets to rugged agricultura... Read more

I’m a Mechanical Design Engineer with a passion for creating designs that look good, work well, and are built to last. I’ve worked on a variety of projects, from consumer gadgets to rugged agricultural implements and I always combine creativity with engineering precision. What I Do Best: • Build complex mechanical assemblies in SolidWorks, with automation via VBA macros to save time. • Apply knowledge-based engineering rules to make designs consistent and efficient. • Run simulation-driven design checks in ANSYS before a single part is manufactured. • Prototype parts using 3D printing for quick design validation. • Integrate electronics with mechanical designs using Proteus 8 (including custom SPICE components + DLL integration) and Arduino. • Create Python scripts and GUIs for engineering calculations, automation, and visualization. If you want someone who can design, test, and prototype your idea from start to finish, while keeping the process clear and deadlines on point, I’m ready to work with you.

I am a Mechanical CAD Designer and Mechatronics Engineer specializing in 3D modeling, mechanism kinematics, and structural simulation for aerospace and robotics. Core Strengths & Skillsets: 3D CAD &... Read more

I am a Mechanical CAD Designer and Mechatronics Engineer specializing in 3D modeling, mechanism kinematics, and structural simulation for aerospace and robotics. Core Strengths & Skillsets: 3D CAD & Simulation: SolidWorks, PTC Creo, Fusion 360, and Ansys. Additive Manufacturing: Optimizing geometries for FDM 3D printing with engineering composites (PA6-CF, PC-ABS, TPU). Drafting: Production-ready 2D drawings with strict GD&T. Key Projects & Education: UAV Systems: Led 3D CAD design and structural simulation for a military drone swarm (Indian Army Internship) and an internationally award-winning heavy-lift multirotor. Robotics: Authored published research (Springer Nature) on the kinematic CAD assembly and 3D print optimization of a 6-DOF robotic arm. Education: B.E. in Mechatronics Engineering, Thapar Institute of Engineering & Technology. I prioritize clean CAD architecture, functional reliability, and clear communication.

Professional PCB electronic designer, test & development Expertise ​Derived from over 10 years of field experience in Switzerland and Italy

Professional PCB electronic designer, test & development Expertise ​Derived from over 10 years of field experience in Switzerland and Italy

I have 5 years of professional working experience as PCB Design Engineer and electronics. My skills include full hardware creation.

I have 5 years of professional working experience as PCB Design Engineer and electronics. My skills include full hardware creation.

A 3rd year Mechanical Engineering student that has a experience in 2d and 3d modelling using Autocad. Used to make actual 3d model or prototype project and crafts that is related with mechanics and ba... Read more

A 3rd year Mechanical Engineering student that has a experience in 2d and 3d modelling using Autocad. Used to make actual 3d model or prototype project and crafts that is related with mechanics and basic electronics.

An engineering student who specializes in mechanical drafting and digital electronics. I am new to the field, and I have experience in Oneshape, and Autodesk Inventor.

An engineering student who specializes in mechanical drafting and digital electronics. I am new to the field, and I have experience in Oneshape, and Autodesk Inventor.

With a background in Electronics Engineering from ENSICAEN, I specialize in transforming innovative ideas into functional electronic products. Through my agency, DesignForU, I provide end-to-end suppo... Read more

With a background in Electronics Engineering from ENSICAEN, I specialize in transforming innovative ideas into functional electronic products. Through my agency, DesignForU, I provide end-to-end support for hardware development, focusing on precision, reliability, and manufacturability. My Strengths & Expertise: Sensor Integration & Instrumentation: Expert in data acquisition, signal conditioning, and high-precision measurement systems. Full-Stack Hardware Development: From schematic capture and multi-layer PCB layout to firmware development (C/C++). Rapid Prototyping: Bridging the gap between electronics and mechanical constraints for cohesive product design. IoT & Embedded Systems: Designing smart, connected solutions optimized for low power and performance. Key Accomplishments: Graduated from ENSICAEN with a focus on Sensors and Instrumentation. Successfully launched DesignForU, helping startups and SMEs develop custom electronic solutions. Proven track record in managing the entire product lifecycle: Design, Prototyping, and Validation. I am dedicated to delivering clean, professional designs that meet industry standards. Let’s turn your technical challenges into market-ready products.

Signal Integrity Electronics is a small family business. We have been designing electronic devices for inventors, startups and small technology companies since 1997. We specialize in proprietary contr... Read more

Signal Integrity Electronics is a small family business. We have been designing electronic devices for inventors, startups and small technology companies since 1997. We specialize in proprietary controller boards for motor, heater and lighting control. We are experts with micro-controllers (hardware and firmware), networked sensors using copper and radio (Ethernet/WiFi, 802.15.4, proprietary protocols), solar power and battery management. We have done scores of design and prototyping projects for industrial, agricultural and medical applications.

I have gained experience as an Electronics Engineer trained in analog and digital signal processing, I have 7 years of experience with multiple applications, including communications and RF power elec... Read more

I have gained experience as an Electronics Engineer trained in analog and digital signal processing, I have 7 years of experience with multiple applications, including communications and RF power electronics. I have skills developed within a number of computer-aided design packages, these include Autodesk Inventor, Autodesk Fusion 360, SolidWorks, AutoCAD, Visual Basic & C. In addition, I have gained experience using 3D printers & designed and developed a number of parts in both my spare time and in a professional environment. I have also produced a number of PCBs using the Autodesk Eagle and OrCAD software packages.

Automation and Embedded Systems Engineer with experience in electronics, firmware development, and PCB design. I work with microcontrollers such as Arduino, ESP32, ESP8266, and Raspberry Pi, developi... Read more

Automation and Embedded Systems Engineer with experience in electronics, firmware development, and PCB design. I work with microcontrollers such as Arduino, ESP32, ESP8266, and Raspberry Pi, developing hardware and software solutions for automation and IoT projects. My experience includes sensor integration, communication protocols, basic industrial automation, and custom PCB development. I design electronic circuits, create schematics and PCB layouts, and develop embedded firmware focused on reliability and performance. I also have experience with system testing, debugging, and prototyping. My main goal is to deliver efficient, reliable, and cost-effective engineering solutions, always focusing on quality and client satisfaction. Skills: • Embedded Systems • Automation Systems • PCB Design • Electronics Engineering • IoT Solutions • Firmware Development • Hardware Integration • Prototyping and Testing

I design electronic circuits, PCBs, and embedded systems for prototyping and product development. My experience includes schematic capture, PCB layout, circuit simulation, and digital hardware design... Read more

I design electronic circuits, PCBs, and embedded systems for prototyping and product development. My experience includes schematic capture, PCB layout, circuit simulation, and digital hardware design using modern engineering tools. I assist clients with transforming ideas into practical electronic designs, from schematic capture to PCB layout and simulation. My areas of expertise include: • PCB Design (KiCad) • Schematic Capture • Multi-layer PCB Layout • LTspice Circuit Simulation • Analog & Digital Circuit Design • ESP32 & AVR-based Embedded Systems • Verilog RTL Design • Basic FPGA Development • Component Selection & Bill of Materials (BOM) • Gerber File Generation • PCB Manufacturing Preparation I emphasize clear communication, organized documentation, and timely project delivery. I focus on clean PCB layouts, manufacturable designs, clear documentation, and prompt communication throughout each project. I look forward to collaborating on electronics and embedded system projects.

I am a 3D modeling and prototyping specialist with around 5 years of practical experience in CAD design, 3D printing, and technical assembly. I specialize in creating functional 3D models using Autod... Read more

I am a 3D modeling and prototyping specialist with around 5 years of practical experience in CAD design, 3D printing, and technical assembly. I specialize in creating functional 3D models using Autodesk Fusion 360, designing mechanical parts, gears, bushings, custom components, and replacement parts based on drawings, sketches, or physical samples. My experience includes: - 3D CAD modeling and product design - Mechanical parts and functional prototypes - Reverse engineering and redesign - 3D printing preparation and optimization - Technical assembly and prototyping - Basic electronics, Arduino, and ESP32 projects One of my projects involved developing and assembling a functional hand prosthesis prototype. I focus on practical solutions, precision, and attention to detail. I enjoy turning ideas and technical requirements into functional designs.

Mechanical CAD Engineer specializing in SolidWorks product design, Design for Manufacturing (DFM), and basic PCB layout in KiCad. I turn concepts, sketches, and rough ideas into precise, production-re... Read more

Mechanical CAD Engineer specializing in SolidWorks product design, Design for Manufacturing (DFM), and basic PCB layout in KiCad. I turn concepts, sketches, and rough ideas into precise, production-ready 3D models, assemblies, and custom electronics enclosures. Core Technical Expertise: • 3D Modeling & Assemblies: Functional mechanical components, complex assemblies, and 2D engineering drawings (ISO/ANSI standards). • Design for 3D Printing (DFAM / FDM): Enclosures and structural components optimized for FDM/SLA printing with proper tolerances, snap-fits, heat-set inserts, and minimal support requirements. • Sheet Metal & CNC Design: Brackets, housings, enclosures with accurate bend allowances, K-factor calculation, and clean DXF exports for laser cutting. • PCB Design & Electronics Integration: Basic PCB layout design and schematic capture using KiCad, seamlessly matched with custom enclosures for microcontrollers (ESP32, Arduino) and hardware modules. Deliverables I Provide: • Native CAD files (.SLDPRT, .SLDASM) • Neutral 3D CAD formats (.STEP) • Manufacturing & Printing files (.STL, .3MF, .DXF for sheet metal) • Basic PCB production files (KiCad project files, Gerbers) • Dimensioned 2D PDF drawings with tolerances Focused on creating reliable, manufacturing-ready designs tailored to your specific production equipment and project requirements.

I am an Electronics & Communication Engineering specialist offering a versatile mix of CAD drafting, simulation, and embedded design. My technical toolkit includes AutoCAD for precise 2D/3D modeling a... Read more

I am an Electronics & Communication Engineering specialist offering a versatile mix of CAD drafting, simulation, and embedded design. My technical toolkit includes AutoCAD for precise 2D/3D modeling and COMSOL Multiphysics for Finite Element Analysis (FEA). I provide end-to-end electronic prototyping support, from PCB design in Proteus and MATLAB Simulink simulations to firmware development via Arduino IDE and MASM32. Backed by a research background with a Springer publication, I deliver industry-standard technical documentation and reliable, data-driven engineering solutions for IoT and hardware projects.

I am an Electronics and Communication Engineering student with hands-on experience in ESP32, sensors, embedded systems, IoT and PCB design using KiCad. I can assist with: • PCB schematic design • PCB... Read more

I am an Electronics and Communication Engineering student with hands-on experience in ESP32, sensors, embedded systems, IoT and PCB design using KiCad. I can assist with: • PCB schematic design • PCB layout and routing • Component and footprint selection • ERC and DRC checking • BOM preparation • Gerber generation • ESP32 and sensor-based electronics • Basic embedded firmware • Electronics prototyping and documentation I focus on practical, well-organized electronics designs and clear communication with clients.

-Creation of 3D CAD models: Catia V5, NX Unigraphics, Creo Pro E -Creation of Assembly and Part Drawings -Plastic Injection molding -Plastic Part Design -Tolerance Stack Up -Geometric Dimension a... Read more

-Creation of 3D CAD models: Catia V5, NX Unigraphics, Creo Pro E -Creation of Assembly and Part Drawings -Plastic Injection molding -Plastic Part Design -Tolerance Stack Up -Geometric Dimension and Tolerance -Sheet Metal Design -Basic Knowledge of Electronics -Basic Knowledge of Car interior Lighting -Aluminum Casting -Cold Forging

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company... Read more

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company is called Faithful Engineering, LLC. I served as a Vice President of Engineering for 20 of my 33 years in the product manufacturing industry, so there are very few engineering functions that I have not had some experience with. Let me show you what a difference that can make!