Hire the best freelance AMD Xilinx Vivado expert designers for your company

Electrical Engineer with over 20 years experience in most industries (Aerospace, Photonics/optical, Medical, Government, etc). I have successfully developed and deployed prototypes and volume-manufact... Read more

Electrical Engineer with over 20 years experience in most industries (Aerospace, Photonics/optical, Medical, Government, etc). I have successfully developed and deployed prototypes and volume-manufactured products at all levels of complexity. Strong background in FPGA/SoC design, especially for AMD/Xilinx MPSoC, RFSoC, and Versal. Decades of experience with Altium for schematic capture and high-speed/HDI PCB layout, including designs for > 100Gbps per lane PAM-4 digital transceivers as well as RF.

I am an Electronics and PCB Design Engineer with hands-on experience in schematic development, PCB layout, circuit simulation, embedded hardware, mixed-signal electronics, and RTL verification. I hold... Read more

I am an Electronics and PCB Design Engineer with hands-on experience in schematic development, PCB layout, circuit simulation, embedded hardware, mixed-signal electronics, and RTL verification. I hold a B.Tech in Electrical and Electronics Engineering from VIT with a 9.76 CGPA and am a Marvell M-STEM Excellence Scholar. I work with Altium Designer, KiCad, LibrePCB, DesignSpark PCB, Cadence Allegro, LTspice, Qucs-S/ngspice, and OrCAD PSpice. My services include component selection, schematic capture and review, two-layer and four-layer PCB layout, symbol and footprint creation, ERC/DRC resolution, circuit simulation, BOM preparation, Gerber and manufacturing outputs, and technical documentation. My experience includes developing safety-critical PCBs, an LTC6811-based battery-management system, CAN communication and data-acquisition circuits for an electric Formula Student vehicle. I have also contributed to a low-noise wearable physiological-monitoring platform at IIT Mandi and worked on STM32, ESP32, USB-C, power-converter, sensor-interface, and IoT hardware. Alongside PCB and embedded development, I have designed a four-stage RV32I processor in Verilog and developed self-checking cocotb testbenches using Verilator. This gives me experience approaching projects from both the electronic-system and digital-design levels. I value clear communication, careful documentation, and practical engineering. I document assumptions, follow datasheet recommendations, and design with reliability, manufacturability, testing, and future debugging in mind.

I am an electrical engineering graduate specializing in hardware design, PCB development, and hardware/software co-design. I currently develop electronic products for the aerospace industry, working a... Read more

I am an electrical engineering graduate specializing in hardware design, PCB development, and hardware/software co-design. I currently develop electronic products for the aerospace industry, working across digital and analog circuit design, FPGA architecture, PCB design, and custom test fixtures in an environment governed by rigorous aerospace requirements. My expertise includes: • PCB schematic capture and layout, including power supplies, digital and analog interfaces, and component selection. • FPGA development in VHDL and SystemVerilog, from architecture and simulation to hardware integration. • Hardware/software co-design, embedded systems, and C/C++/C#/Python development. • Test automation, production fixtures, communication protocols, and computer vision for camera validation. I hold a B.Eng. in Electrical Engineering from ÉTS and am currently pursuing a research-based master’s degree focused on FPGA architectures and hardware security. I can help with PCB design and review, FPGA development, electronic prototyping, test automation, and hardware/software integration. I value clear specifications, practical solutions, and thorough validation.

I am an Electronics & Communication Engineer specializing in Analog IC Design, VLSI, mixed-signal circuits, semiconductor engineering, and hardware development, with additional experience in technical... Read more

I am an Electronics & Communication Engineer specializing in Analog IC Design, VLSI, mixed-signal circuits, semiconductor engineering, and hardware development, with additional experience in technical research, project execution, and engineering documentation. My primary expertise is transistor-level analog circuit design and simulation using Cadence Virtuoso and CMOS technologies. I have worked with differential amplifiers, current mirrors, common-source amplifiers, cascode and folded-cascode architectures, biasing circuits, current sources, CMOS operational amplifiers, two-stage op-amps, and DAC-integrated analog systems. I am comfortable with transistor sizing, bias analysis, circuit optimization, and simulation-driven design. I have experience evaluating gain, bandwidth, GBW, phase margin, gain margin, slew rate, ICMR, CMRR, PSRR, noise, power consumption, stability, DC operating point, transient response, and PVT/corner performance. I can assist with circuit debugging, performance analysis, architecture comparison, and optimization. My VLSI and mixed-signal interests also include PLLs, Phase Frequency Detectors (PFDs), VCOs, frequency-synthesis concepts, feedback systems, and high-speed semiconductor architectures. I have worked on research-oriented exploration of PFD architectures and technical circuit concepts, with interest in research-paper development and patent-oriented innovation. I also have exposure to CMOS layout and physical-design concepts, including device matching, parasitic considerations, layout optimization, and implementation-oriented design. In hardware engineering, I can contribute to PCB design, electronic circuit development, component selection, prototyping, debugging, and system-level hardware projects. My broader technical background includes digital electronics, CMOS logic, RTL concepts, FPGA architecture, semiconductor design methodologies, RTL-to-GDSII flow concepts, basic C and Python, Linux, data analysis, and technical documentation. I can contribute to projects involving Analog IC Design, CMOS Circuit Design, VLSI, Mixed-Signal Design, Cadence Virtuoso, Circuit Simulation, PLL, PFD, VCO, CMOS Layout, PCB Design, Hardware Engineering, Semiconductor Research, Technical Research, and Engineering Documentation. I approach every project systematically: understand specifications, select an appropriate architecture, implement the design, simulate and validate performance, identify limitations, and optimize the final solution. My additional experience in project coordination, stakeholder communication, documentation, and startup operations enables me to contribute effectively to multidisciplinary engineering projects. I am particularly interested in challenging projects involving analog and mixed-signal ICs, VLSI, semiconductor innovation, PLL/PFD/VCO architectures, PCB and hardware development, research, and circuit design.

designed before a shop crane and robotic leg and designed before bench vice designed a VGA card using FPGA (basys-3) designed a circuit counted the number of people passes the door using hardware chi... Read more

designed before a shop crane and robotic leg and designed before bench vice designed a VGA card using FPGA (basys-3) designed a circuit counted the number of people passes the door using hardware chips only using arduino

Multidisciplinary Electrical Engineer with over 18 years of experience spanning Medical, Military, Aerospace, and Industrial sectors. Possesses a unique academic background with degrees in Electrical... Read more

Multidisciplinary Electrical Engineer with over 18 years of experience spanning Medical, Military, Aerospace, and Industrial sectors. Possesses a unique academic background with degrees in Electrical Engineering, Physics, and Chemistry, bridging the gap between theoretical science and practical hardware application. Expert in full-cycle product development—from schematic capture and PCB layout to firmware integration and manufacturing bring-up.

Electronic Engineer with strong experiences with Schematics, PCB, FPGA and Firmware. 1. Schematics and PCB Tool : Altium Designer(9, 14, 16, 17, 19, 20) Main Work : Making SCH&PCB Lib, Design Schemati... Read more

Electronic Engineer with strong experiences with Schematics, PCB, FPGA and Firmware. 1. Schematics and PCB Tool : Altium Designer(9, 14, 16, 17, 19, 20) Main Work : Making SCH&PCB Lib, Design Schematics and ERC check, PCB Layout and Routing, DRC check, BOM, Generating Fabrication. Routing Skills : DDR3, HDMI, MDI, GMII/RGMII YCbCr, RGB, USB2.0/3.0, MIPI DSI, CSI, LVDS, etc. 2. FPGA Tool : Vivado, Xilinx ISE, Quartus and ModelSim Main Languages : Verilog and SystemVerilog Developed Cores : UDP, I2C, SPI, UART, AXI interface cores, MIG, LDPC, BCH, OFDM 3. Firmware Tool : Ubuntu, Raspbian, Arduino IDE, Keil, SystemWorkBench, STMCubeMx, Xilinx SDK, IAR, MPLABX, nRF SDK, Segger Studio, MCUXpresso and so on. Main Works : Embedded Product, IoT Product, Automatic Control Product and so on.

30+ years experience in all facets of hardware design, firmware, FPGA design and PCB layout. Applications include Industrial Automation/Control/IoT, Home Automation, Automotive, Aerospace/Defense, Con... Read more

30+ years experience in all facets of hardware design, firmware, FPGA design and PCB layout. Applications include Industrial Automation/Control/IoT, Home Automation, Automotive, Aerospace/Defense, Consumer, Medical and many other. Certified Design Partner for Altera/Intel and others.

As a recent Electrical Engineering graduate, I am highly motivated to apply my academic foundation in C/C++ and PCB design to real-world projects. I offer competitive rates in exchange for the opportu... Read more

As a recent Electrical Engineering graduate, I am highly motivated to apply my academic foundation in C/C++ and PCB design to real-world projects. I offer competitive rates in exchange for the opportunity to build long-term professional relationships and a world-class portfolio. I am dedicated to precision, timely delivery, and clear communication

Viet Engineering provides Computer Aid Design (CAD) and Finite Element Analysis (FEA) for Oil and Gas Industry. We also support consumer product development and manufacturers.

Viet Engineering provides Computer Aid Design (CAD) and Finite Element Analysis (FEA) for Oil and Gas Industry. We also support consumer product development and manufacturers.

Experienced, enthusiastic, and innovative mechanical design engineer with extensive experience in machine and product design, robotics, factory, and production automation.

Experienced, enthusiastic, and innovative mechanical design engineer with extensive experience in machine and product design, robotics, factory, and production automation.

to whom it may concern, My name is Drew Hanavan, and I am a recent graduate in the field of 3d animation which gives me a unique level of skills for all forms of art. I am equipped with the skills ne... Read more

to whom it may concern, My name is Drew Hanavan, and I am a recent graduate in the field of 3d animation which gives me a unique level of skills for all forms of art. I am equipped with the skills necessary to fit any criteria that you need to advance your project to the next level. I specialize in hard surface modeling and feel most comfortable when making beautiful scenic structures and environments. I am, however, capable of doing a wide variety of jobs in the 3d animation field, including skills not simply limited to 3d animation. I am experienced in illustration, which I frequently use for character creation and storyboard, as well as years of experience in Photoshop and other adobe products. I have included my resume below which helps highlight my skills and experience not only in 3d animation but in the general art field.

A fresh graduate Civil Engineer with analytical skills, seeking the chance of gaining good experience, personal and professional skills, and sharing them with others.

A fresh graduate Civil Engineer with analytical skills, seeking the chance of gaining good experience, personal and professional skills, and sharing them with others.

I am a mechanical engineering, and have been into advanced cad designing since last 5 years. I have worked for a few startups as a product designer, have 3 years of experience in rapid prototyping and... Read more

I am a mechanical engineering, and have been into advanced cad designing since last 5 years. I have worked for a few startups as a product designer, have 3 years of experience in rapid prototyping and 3d printing. I focuss on deadlines, and efficient enough to work in any conditions. Have experience also in aerospace design sector.

Mechanical Design Engineer with experience in Creo Parametric and CAD design. Skilled in 3D part modeling, 2D manufacturing drawings, assemblies, fixture and tooling design, and engineering design mod... Read more

Mechanical Design Engineer with experience in Creo Parametric and CAD design. Skilled in 3D part modeling, 2D manufacturing drawings, assemblies, fixture and tooling design, and engineering design modifications. I can convert 2D drawings into accurate 3D CAD models and create manufacturing-ready drawings based on customer requirements.

Experienced as Fixture Design and Mechanical design who used to create flow process using NX siemens, SolidWorks and Autodesk inventor.

Experienced as Fixture Design and Mechanical design who used to create flow process using NX siemens, SolidWorks and Autodesk inventor.

I am a Mechanical CAD Designer and CNC Programmer with over 4 years of experience in CAD/CAM programming and 8+ years of hands-on machining experience. My background in both machining and CAD/CAM enab... Read more

I am a Mechanical CAD Designer and CNC Programmer with over 4 years of experience in CAD/CAM programming and 8+ years of hands-on machining experience. My background in both machining and CAD/CAM enables me to create designs that are not only accurate but also practical, efficient, and ready for manufacturing. I specialize in developing high-quality 3D mechanical models, 2D manufacturing drawings, CNC milling toolpaths, and production-ready CAD files. My practical knowledge of machining processes, tooling, workholding, tolerances, and manufacturing requirements allows me to design parts that can move smoothly from concept to production. My Expertise 3D Mechanical CAD Modeling Mechanical Part & Assembly Design AutoCAD 2D Drafting Manufacturing & Fabrication Drawings Mastercam CNC Programming CNC Milling Toolpaths (2D & 3D) PDF, Sketch & Image to DWG/DXF Conversion Engineering Drawings for Manufacturing Design for Manufacturing (DFM) Production-Ready CAD Documentation Why Work With Me? I understand both the design office and the machine shop. My experience in machining helps me identify potential manufacturing issues early, resulting in designs that are practical, accurate, and optimized for production. I am committed to: Delivering accurate and detail-oriented work. Maintaining clear and professional communication. Meeting agreed deadlines. Providing reliable support throughout the project. Whether you need a mechanical component designed from scratch, professional manufacturing drawings, CNC toolpaths, or existing sketches converted into production-ready CAD files, I am dedicated to delivering high-quality results that meet your project requirements.

Experience in: Manufacturing, Industrial Design, Construction, Interior Design

Experience in: Manufacturing, Industrial Design, Construction, Interior Design

I'm Jose Sta Cruz Graduate with a course of Bachelor of Science in Architecture as a young and motivated individual, With at least 12 years experience in different discipline that feed me a lot to exp... Read more

I'm Jose Sta Cruz Graduate with a course of Bachelor of Science in Architecture as a young and motivated individual, With at least 12 years experience in different discipline that feed me a lot to expose on Architectural, Interior, Landscape and Planning, Right now I am connected with the architectural company that engage in designing, I handle the Landscape department. Our project comes mostly in Asia like Hongkong, China, Indonesia, Vietnam, Where in this opportunity help me to expose on design by using of hand sketches, Auto Cad, Photoshop and 3D software, in design stage we are working with the design presentation once approved the next is the design development stage or documentation make it the drawing more detailed and ready for construction. Aside from being connected to the company I am open to have some additional project outside. Right now in my freelance jobs i am working some logos, poster, banner, business card and some related graphics design jobs and I am interested in submitting an application for the opportunity that fits into your job require. I believe that my motivation, commitment and pre-existing skills will allow me to fit into your work environment and immediately start supporting the needs of your job. I would appreciate the opportunity to discuss my application at your convenience time.

I had more than three years of experience in working as a Jr. Architect in real estate & interior design firms. Design & Planning with AutoCAD & 3ds Max is my expertise . Hope to be a resourceful desi... Read more

I had more than three years of experience in working as a Jr. Architect in real estate & interior design firms. Design & Planning with AutoCAD & 3ds Max is my expertise . Hope to be a resourceful designer to your company. Why me? - Expert in Interior & Exterior 2D & 3D Modeling. - Designing & Planning for both house & commercial projects. - Estimation (interior project) - Photo Realistic Render. - Software Skills (AutoCAD, 3ds Max, Microsoft Word & Excel)

I am a professional AutoCAD draftsman with experience in architectural and structural drawings for residential and commercial projects. I specialize in converting hand sketches, PDFs, and site measure... Read more

I am a professional AutoCAD draftsman with experience in architectural and structural drawings for residential and commercial projects. I specialize in converting hand sketches, PDFs, and site measurements into clean, accurate, and fully editable AutoCAD files. My services include floor plans, sections, reinforcement detailing, and drawing cleanup with proper layers and dimensions, I focus on accuracy, fast delivery, and clear communication so clients receive drawings that are ready for construction or presentation. If you need reliable CAD support for your project, I am ready to help you with high-quality results and revisions until you are satisfied.

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I have a bachelor's degree in mechanical engineering with 20 years of experience in the field. I use to work as a Manufacturing Engineer, Process Engineer, and Design Engineer. Using the CAD softwar... Read more

I have a bachelor's degree in mechanical engineering with 20 years of experience in the field. I use to work as a Manufacturing Engineer, Process Engineer, and Design Engineer. Using the CAD software is one thing, but understand the feasibility of the product and understand the CNC and 3D printing process is part of the 2D/3D design process. With this experience, I can make a new product from zero to works entirely in the final assembly. I can create a 3D model, 2D drawing, high-quality image rendering with many different file formats: STL, .STEP, .PDF

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. *... Read more

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. * 3D mechanical designing and detailing.

From Department of Civil Engineering, KUET. ALHAMDULILLAH. Can make AutoCAD drawings of good quality INSHALLAH.

From Department of Civil Engineering, KUET. ALHAMDULILLAH. Can make AutoCAD drawings of good quality INSHALLAH.