Description:I'm a tech&des student in the UK. I've been able to get by without being great at CAD but this year is unavoidable. My project is a wristband designed for old people that can track where they are and their heart rate. This project will be straight forward for anyone familiar with solid works 2013, neeed it by the next 2 days, (due on wed)
Wants:Regular silicone wristband size. Any colour (not bright), grey preferably. Basically a wristband with a chip and mini usb port. Somewhere on it must say the letters POM. Need to be able to print it out in parts, exploded, fully rendered and I need to be able to hand the file into the university to be 3d printed. something similar to the attached file would be what im after.
Don't Wants:Chunky sized block on the band. bright colours. too much detail. don't want it to be too professional looking
Ask for Sample:sample would be great
- SolidWorks (2013/14)
Similar Contests on Cad Crowd
Resto un midi avec Guénolé
Double-sided Clamp Redesign
Double Sided Aluminum Clamp. Need redesign of part to make it easier to manufacture on CNC mill. Currently, the easiest method is waterjetting the clamping profile before finishing on the CNC mill. We would like to make the manufacturing easier and all in one MILL.
PDF to SolidWorks
Convert PDF to Solid Works 14
Outdoor TV Enclosure
Design an outdoor TV Enclosure for 32" flat screen TV to be used outdoor such as backyard, pool, or cafeteria. - Inside the enclosure will hold flat screen TV with dimension of 30" x 18" x 2" (W x H x D). Dept can be extended if needed. - TV must be safely secure inside the enclosure when not attach to the VESA Wall mount - Must be able to mount with VESA Wall mount standard of 200mm x 200mm - Water resistant but does not need to be completely waterproofed - Have a cooling system, either ventilation for airflow (Fans) or cool down liquid (Freon) - A sound bar will be located in the bottom of the enclosure - Would be nice if the enclosure has feet that can be pushed in or pulled out when place on the ground to keep it balance.
Mechanical Engineer to develop light guides or light pipes used with LEDs
Looking for an engineer that has experience with light guides or light pipes used with LEDs, and that can design a few simple light guides for an electronic device. 3 LEDs - red, green, blue will feed the light pipe. the other end of the light pipe will be visible to the user thorugh a cutout in the enclosure. the user will see this end of the light pipe, which is 2 strips each at .2 wide x 2" long. there may be some curvature to these 2" long strips (maybe a radius of 2.5"). when the red LED is on the strips will light up red. same for green, etc. need to make sure the lighting is continuous (not brighter at one end than the other). Proven experience with LIght pipes is required. $100 for initial sketch and background proving that this design will work. Further work would then be given to winner to develop the concept into a injection molded part. Good Luck and I look forward to working with you.