SolidWorks Simple Box with 2 Cords - Freelance 3D Designer Contest

in 3D Modeling Design held by Refined Designs
Contest Closed
  • Open
  • Choosing Finalist
  • Ended
Description:
Keep the dimensions of the box exactly as they are in the 2D version (they are in imperial but can be changed to metric in the solidworks file) I'm looking for a clean 3D Solidworks file of the exterior with the 2 cords that can pull out almost to look like an assembly drawing in Solidworks. I'm not looking to get detailed on what the product is or how it will work, but the top port is a Micro USB, and the bottom port is a Lightning USB. The notches on both are for fingernails and a cord will pull out. There is a very small power button on the bottom and 4 LED lights on the back side that I will update soon. I'm looking for conceptual nice looking design to use for sale of the product.
Wants:
The box will be a plastic and the notches must be visible, the color of the box will be orange (157) and the cords coming out of each should be black. As for the tabs with the notches: lightning cord = green (347) and the USB will be purple (527). The power button is black. Contest is long but will be picking a design quickly.
Don't Wants:
Non visually pleasing designs, we need something that looks good visually. Do not worry about the mechanics on the inside
Software:
  1. SolidWorks

Entries

= Buyer's Rating
#18 box with 2 cord by danby
Feb 4, 2014 22:03
#17 simple box with 2 cords by vinya
Jan 27, 2014 4:33
#16 box. by RAVI KUMAR
Jan 24, 2014 18:37
#14 SIMPLE BOX WITH 2 CORDS by vinya
Jan 22, 2014 7:13
#13 simple box with cord by DBARN
Jan 21, 2014 21:47
#12 Box assembly by danby
Jan 21, 2014 17:43
#11 Simple box with 2 cords by vinya
Jan 21, 2014 11:17
#10 Simple Box - 2 by Patrick.H
Jan 21, 2014 4:10
#9 Simple Box by Patrick.H
Jan 21, 2014 4:08
#2 SIMPLE BOX WITH CORD by DBARN
Download Files
Jan 17, 2014 14:55
#1 Box Rough Draft by jnatzic
Jan 17, 2014 8:21

Discussion

vinya

Designer

Tue, 21 Jan 2014 14:31:08 +0000
just want to confirm which one is lower side is it the side where LEDs are?
Mon, 20 Jan 2014 23:14:59 +0000
Updated Attachment Spec Sheet: Includes a usb port on the bottom of the unit located in the lower side.
Sun, 19 Jan 2014 09:15:01 +0000
We are looking for the 3D files as well as a compilation of 3D renderings.

jnatzic

Designer

Fri, 17 Jan 2014 22:09:33 +0000
Do you want the actual 3D files or are you just looking for renderings?
Fri, 17 Jan 2014 18:55:47 +0000
Updated Attachments, 4 LED lights on back, USB port being added to top, will have location tonight

Similar Contests on Cad Crowd

Resto un midi avec Guénolé
xcvbxcvbxcvbxcvsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdfsdfqsdfqsdfqsqfsdfqsdfqsdf
Waterproof Air monitor for drones
Hi, We need a waterproof air monitor for our drones, which has enough airflow to detect particulates, gasses and other pollutants. And has no water ingress. The enclosure needs to be made from plasics, ABS of PLA, and there has to be an atenna for a LoRa module an arduino and batteries. The sensors will be placed directly onto the arduino.
Mechanical Engineer to develop light guides or light pipes used with LEDs
Looking for an engineer that has experience with light guides or light pipes used with LEDs, and that can design a few simple light guides for an electronic device. 3 LEDs - red, green, blue will feed the light pipe. the other end of the light pipe will be visible to the user thorugh a cutout in the enclosure. the user will see this end of the light pipe, which is 2 strips each at .2 wide x 2" long. there may be some curvature to these 2" long strips (maybe a radius of 2.5"). when the red LED is on the strips will light up red. same for green, etc. need to make sure the lighting is continuous (not brighter at one end than the other). Proven experience with LIght pipes is required. $100 for initial sketch and background proving that this design will work. Further work would then be given to winner to develop the concept into a injection molded part. Good Luck and I look forward to working with you.
Outdoor TV Enclosure
Design an outdoor TV Enclosure for 32" flat screen TV to be used outdoor such as backyard, pool, or cafeteria. - Inside the enclosure will hold flat screen TV with dimension of 30" x 18" x 2" (W x H x D). Dept can be extended if needed. - TV must be safely secure inside the enclosure when not attach to the VESA Wall mount - Must be able to mount with VESA Wall mount standard of 200mm x 200mm - Water resistant but does not need to be completely waterproofed - Have a cooling system, either ventilation for airflow (Fans) or cool down liquid (Freon) - A sound bar will be located in the bottom of the enclosure - Would be nice if the enclosure has feet that can be pushed in or pulled out when place on the ground to keep it balance.
Smart Wristband
I'm a tech&des student in the UK. I've been able to get by without being great at CAD but this year is unavoidable. My project is a wristband designed for old people that can track where they are and their heart rate. This project will be straight forward for anyone familiar with solid works 2013, neeed it by the next 2 days, (due on wed)