Description:We have old AutoCAD drawings for a 4000sft residence that need to be converted to ACAD 2013 or 2014 including assigning drawing elements to current Architectural CAD layer standards.
Wants:Quality of sample work, price and turn around time.
Don't Wants:This is not a design project. We need fast, clean CAD only.
Ask for Sample:Please take a look at the first floor plan and show how you would clean the drawings up.
- AutoCAD (2013)
Additional InformationDrawings include:
2 floor plan Sheets
3 elevation sheets
1 site sheet
*** The layers should be set to current US Cad Layer Standards:
#3 A1_first_floor by bob_zurunkle
I did enough to demonstrate what could be done. Some layers but not all yet. Annotative dimension style for 3/32" lettering. Border & Title moved to layout tab. A field reads the tab name as the sheet number. A field reports the viewport scale. Custom fields report project info as entered in File --> Drawing Properties --> Custom tab.
#7 1400120012101025_A1_first_floor Rev-A.dwg by Mauro
Similar Contests on Cad Crowd
Creating the St. Maxine Patio Lounger coverrtable to Bench
I would like to have a design for two wood loungers that have a retractable wood piece that can convert the loungers into benches. I would also like to have a table that can retact up into an umbrella with this plan. A wood table that can come down and be the table when its a bench/loveseat and disappear
300 sqm 3D floorplan sketch
I have a land and I'm planning to make a 4 floor building for a residential purpose . The design should be a modern style apartment .the land size is 700 sqm but the allowed space for building is 300 sqm . I need to see 2 different designs as this : First design : The floor should consists of 2 apartments , first apartment to have 3 bedroom and the second apartment to have 2 bedroom . Both apartments must have at least 1 master bedroom , a living room and a hall with setting and dining area . I suggest the size to be 170 for the 3 bedroom and 130 for the 2 bedroom . There should be built in wardrobes . Second Design : Should consist of 2 apartments , first apartment to be a 3 bedroom apartment with all masters and a small clothing room in one of the master rooms. it should have also a big hall , living and children playing room if possible . The size of the apartment should not exceed 230 - 240 sqm . The other studio apartment should not exceed 60-70 sqm . I have attached 3d designs that I really liked but it doesn't fit my land plan . I also have attached an autocad floorplan that has been mad by one of the local designers but it didn't meet my expectations but I attached it for your understanding . Please note that the ground floor apartments should have 2 Entrance , one entrance is the Main stairs entrance that leads to other top floors and the elevator and the other one is a side entrance for each apartment in the ground level . You may notice that the setback area is shown in one of the designs attached which should be mined .
Hard-Hat Clipable Safety Notification System
We're looking for small and sleek aesthetic designs for a hard-hat clipable safety notification system for construction workers to improve their work safety.
Chief Architect Designer - Exterior and Roof Design
Would like a prairie style modern home roof and exterior design based on floor plans. May be creative and please MUST use Chief Architect software. I have version X5 and X6. I have attached pictures of examples of what we are looking for. Please incorporate: -30" overhangs -Low pitch - Raised Entry -Raised Rear Deck
This project is to design the housing for a motion detector for commercial office buildings. it should be approximately 2.5-3.0 inch circle and the body should be no more than 1.0 inch thick. the circle can be bigger if the edges sweep out to with a nice curve back to the ceiling surface. it will mount to a standard t-bar ceiling grid. (the kind of ceiling with the drop in tiles) it should mount in the corner of a light fixture with a portion of the "top" or up facing side exposed to the light fixture. and have a window on the top that looks up at the light... (for a light sensor) the window shall be rectangle and dimensions are: 33.0×10.8mm. the face which points to the room shall have a PIR lens (like this one http://www.jvs.de/Carclo_Fresnel/Drawings/PF68_12076_Drawing.pdf i'd like to receive drawings that are 3d printer ready. ease of mass production and tooling should be considered. drawings should also be open for editing by our team. Our team will add the holders, screws, clips, etc for the Electronics inside. the mounting method could be a small piece of spring steel or plastic. White plastic/PC examples: http://cdn3.volusion.com/jn7vt.cfos2/v/vspfiles/photos/HBL3-2.jpg?1416706843