300 sqm 3D floorplan sketch
in
3D Modeling Design
held by
almalaky
Last seen:
Contest Closed
-
Open
-
Choosing Finalist
-
Ended
Description:
I have a land and I'm planning to make a 4 floor building for a residential purpose . The design should be a modern style apartment .the land size is 700 sqm but the allowed space for building is 300 sqm .I need to see 2 different designs as this :
First design : The floor should consists of 2 apartments , first apartment to have 3 bedroom and the second apartment to have 2 bedroom . Both apartments must have at least 1 master bedroom , a living room and a hall with setting and dining area . I suggest the size to be 170 for the 3 bedroom and 130 for the 2 bedroom . There should be built in wardrobes .
Second Design : Should consist of 2 apartments , first apartment to be a 3 bedroom apartment with all masters and a small clothing room in one of the master rooms. it should have also a big hall , living and children playing room if possible . The size of the apartment should not exceed 230 - 240 sqm . The other studio apartment should not exceed 60-70 sqm .
I have attached 3d designs that I really liked but it doesn't fit my land plan . I also have attached an autocad floorplan that has been mad by one of the local designers but it didn't meet my expectations but I attached it for your understanding .
Please note that the ground floor apartments should have 2 Entrance , one entrance is the Main stairs entrance that leads to other top floors and the elevator and the other one is a side entrance for each apartment in the ground level .
You may notice that the setback area is shown in one of the designs attached which should be mined .
Wants:
nill
Software:
- 3ds Max (3D Studio Max)
- AutoCAD
Additional Information
The designer could use any software to make the work done , I need to view it in PDF or JPEG format .
Prepaid PrizeEntries
No Entries Submitted Yet.
Discussion
kindly note that This project has been canceled !! Please stop sending any contest .
you must have submitted something instead of showing me your big mouth laugh Mr.DanyJ . If I must be kidding you then you may find other projects who are not must be kidding you !!
hahaha building design for 240$?? you must be kidding me right?
The furniture will make the 3D look better and the image will be more clear to me ! Thanks
hi- do you need the furniture/ stuff in apartement or just the room building?
full rendering..?
full rendering..?
Only 3d view will do needful ...
Hi - are you looking for 2D view and 3D view?
Hello, I have in my team a syrian Architect and will work on it.
I need to see entries here .
Thanks reda
Hi Angel,
I can help you if you do not understand I contact you translated
REGARDS
REDA
I can help you if you do not understand I contact you translated
REGARDS
REDA
Hi almaliky,
Your plans are in Arabic, I understand and I write this language but the other they do not understand .... for example, who know you want a lift?
I can translate if needed ..... atamana an tafhamani ...
Best
REDA
Your plans are in Arabic, I understand and I write this language but the other they do not understand .... for example, who know you want a lift?
I can translate if needed ..... atamana an tafhamani ...
Best
REDA
Who said that I have selected 1 winner ? The winner has not been selected yet .. You may go ahead and submit your entry
you have selected 1st winner, and compitition is still open, so may we sent our entries yet?
The front should be on the main street where the length of the land x=33 m , the front or the entrance of the building should be on that side . The other sides entrance should be only for the ground floor apartments only . One should be on the side of the land where the length is 17.9 and the other entrance for the otger ground floor apartment where the side length is 27.18 m . The side where the length is 29 m should be the back area and no entrance should be there .. Let me know if you need more details .
In the land layout provided, what would be considered the "front" from a design standpoint? Can the property be accessed from all sides?
Fine ..
please give a time 2-3 days for make this project apartement design.
Similar Contests on Cad Crowd
2-3 bedroom Apts.
Need creative assistance in a floor plan design that flows well yet includes all of our needs for our upcoming second level addition. It is literally a blank slate to work with!
Dimensions are approximately 32' x 26'. Addition will need to have two bedrooms, full bath and a master suite (with bath) and walk in or walk through closet.
Will be able to provide a lower level sketch that shows stair location, bathroom, etc... Only requirement is that new bathrooms stay above the lower level bathroom for plumbing requirements.
Please apply if interested and reach out with questions!
Alfred's Mic's Design Contest
Alfred's Microphones wants to create the worlds first Modular Microphone.
The goal is to create a condenser microphone with interchangeable capsules and circuitry for different studio recording applications.
Design requirements:
1. Capsule/ head piece must be removable.
2. Circuitry must be removable.
3. All removable parts must be easy and quick to assemble.
3. All removable components must be lockable onto the microphone body for stability and durability.
4. standard male XLR connection for base
5.Circuitry isn't being designed here, just the process to easily interchange the interior circuitry and head piece/capsule without any rewiring involved for the microphone user.
Creating the St. Maxine Patio Lounger coverrtable to Bench
I would like to have a design for two wood loungers that have a retractable wood piece that can convert the loungers into benches. I would also like to have a table that can retact up into an umbrella with this plan. A wood table that can come down and be the table when its a bench/loveseat and disappear
Hard-Hat Clipable Safety Notification System
We're looking for small and sleek aesthetic designs for a hard-hat clipable safety notification system for construction workers to improve their work safety.
Clean up old AutoCAD drawings
We have old AutoCAD drawings for a 4000sft residence that need to be converted to ACAD 2013 or 2014 including assigning drawing elements to current Architectural CAD layer standards.
almalaky
Buyer