Modern Wayfarer Sunglasses

in Product Design held by Arion
Contest Closed
Description:
Standard Ray Ban Wayfarer or Oakley Frogskin influenced design but with a flat top.
Wants:
-Anodized aluminum, gun metal grey frame
-Bold, aggressive, sleek looking frame
-Black lenses
-Laser engraved "ARION" both temples

Height of frames: 1.87in
Length of frames: 5.56in
Length of temples: 5.43in
Don't Wants:
As much angle on the lenses as the Ray Ban Wayfarer. The angle on the Oakley Frogskins are perfect though. No jewels on the corners of the frame.
Software:
  1. SolidWorks
Additional Information
Up to Solidworks 2011*

Entries

#3 Modern Wayfarer Sunglasses by SERRAFI DESIGN
Hi,
I hope this model is adapted to your specifications.Please let me know if I should make any modification ...
Thank you
more
2014-01-04 20:19:51
#2 Sun Glass by Hiren Patel
Dear Sir,
Please find the attached image and let me know your though.
Thanks,
Hiren Patel.
more
2013-12-22 18:47:48
#1 Modern Wayfarer Sunglasses by CAD SPARKLES
Modern Wayfarer Sunglasses
more
2013-12-17 15:17:01

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

Plastics Engineer Needed
I am working out a proof of concept for a marine habitat and need an expert who understand techniques of pvc/vinyl or other plastic joinery, using specific glues and (initially) existing extruded shapes. I will provide sketches and my ideas. The plastics engineer will provide feedback and (later on) CAD.
Adaptive snorkel
A snorkel with an inhaler mouthpiece and a mouth mask. It also have a strap to hold it on the user's face
start a revolution!
design a pair of scissors for my new company, I have all of the specs, just need an AutoCad design to send to the manufacturers
Sprocket Assembly
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank
Sphere
need to design a sphere with 7 feet, 8.5 feet and 10 feet diameter. It should be designed in a way that each part to assemble should be of same size. Parts should be detachable. A person should be able to detach 1 part and enter it and person outside should be able to attach it back. If the sphere rolls then part should not detach. Air should pass in the sphere. Design should be in a way easy to produce. It should be very attractive for viewers. Advice me the material to be used.