Fruit Dog Toy Design

in Toys & Games held by EmeraldHillStudios
Contest Closed
Description:
Hello--I am looking for designs of a SOFT dog toy where the dog needs to interact with a piece of fruit (the toy) that has it's name embroidered onto it and a voice comes on to encourage the dog to do the task. For example, a banana --the peel would potentially be held up to the stem by Velcro as intact and the dog would have to peel it with his/her teeth. Maybe there is a spot for a treat inside. When pressure is placed on the piece of fruit, a voice comes on to say "Peel Me!" "Peel the banana!" The idea is to make it fun for both dogs and owners. Owners to chuckle at the voice prompts. I also want them to have different sizes in XS, S, M, and L.
Wants:
Softness of material
Appealing to the owner's eye to purchase
Eyes of the piece of fruit need to look entertaining
Mouth of piece of fruit needs to look entertaining
Needs to be able to made into various sizes
Multiple colors to show dimension
Pieces of fruit need to have a name embroidered on them
Don't Wants:
Vulgar sayings coming out of piece of fruit

Entries

#24 Strawberry dog toy by UJan
Strawberry dog fur toy.
Treat could be inserted in the mouth.
Arms will surely attract dogs.
Open for any suggestions and modifications.
more
Sep 27, 2020 13:55
#23 Grapes_on_the_Vine by kenth
Each "grape" is made of fabric material filled with cotton. The ends of each "stem" from the vine has velcro for the grapes to attach to. Treats can be hidden within the grapes between the stem and the grape (where the grape is attached). The stem allows for any hidden electrical wiring for the sound system (i.e. speaker, battery, wires, presence sensor/motion detection IR sensor for grapes). Whenever a grape is pulled from the stem an 8ohm speaker will play "pick me! pick me!" encouraging the eager pup to choose another purple plush from the mix. Grape sizes can change according to size of dog (this model is designed for an average golden retriever sized pet).
Enjoy!
more
Sep 27, 2020 3:04
#22 Dog Toy by Kevin bains
Hey,
This is the soft toy for dogs with an electronic unit in the centre. There is a tongue, which a dog can pull and any sound would come out from the electronic unit. It can be filled with any kind of treat as well.
Thank you.
more
Sep 27, 2020 1:46
#21 Dog toy by Kevin bains
Hey,
this is the soft toy for dogs with an electronic unit in the centre. There is a tongue, which a dog can pull and any sound would come out from the electronic unit. It can be filled with any kind of treat as well.
Thank you.
more
Sep 27, 2020 1:42
#20 Watermelon Delight by joshuam1
This toy design has been inspired by the watermelon. The watermelon toy consists of seven individual pieces. One 90 degree wedge and six 45 degree wedges. The 90 degree wedge has a smiley face on the watermelon’s flesh and the name of the dog can be embroidered on the watermelon’s rind.
A pressure sensitive voice prompt device can be sewn into the 90 degree section. A squeaker can be sewn into the six 45 degree wedges. The shapes of all the wedges would allow for a pocket to be incorporated into them. This can be accomplished by adding a second layer of material on the face of the wedge. It would function similar to how you would cut a pita pocket in half and add your favorite meats and vegetables.
The wedges would all attached together using Velcro to make up the entire watermelon. The watermelon I drew up is 14 inches tall and 12 inches wide. The material would be robust, but it is not meant to be a chew toy. This idea can be scaled up or down, and other fruits themes like melons, oranges, and honeydew can be used. You can have different prompts that are funny and each fruit specific.
more
Sep 26, 2020 18:39
#19 Fruit Dog toy. by Simba
Hello, please find the attached fruit dog toy which has been designed with reference to an apple. All the requirements has been paid attention to,
Thanks.
more
Sep 26, 2020 8:38
#18 Fruit Dog Strawberry by atekd
Strawberry fruit dog, The model created to look little attractive and funny to. The body is divide in 3 parts. Top part with the leaves, Center body part where the embroidery can be done in the center (give example lola), at the back side there are hole for speaker output producing sound (image attach in zip file). The bottom part has 2 legs. When the dog is relax he can just hold in the mouth and feel the bone of the leg and get relax.
more
Sep 26, 2020 6:43
#17 Yellow Apple fruit toy by atekd
Its a Yellow Apple. The color of the toy is giving which the dog loves. Dog love Yellow and Blue color most, So the combination of Yellow and Blue given on it. The body is soft and like a sphere so that he/she can hold in the mouth comfortably. There are small holes on the surface so that inside speaker can fit to produce sound. Dog like the sound much more a MP3 audio (Dog-Toy-Sound.mp3) attached in zip file. The top part (Blue color) kids dog and hold in mouth and feel to suck like nipple. Big dog can hold in mouth easily. The middle part is round like a ball shape can easily fit in mouth. It has a area for Embroidery or can screen print on it. For example i have placed a name on it "Archer". Thanks
more
Sep 25, 2020 12:40
#16 strawberry dog toy by aakashbhoi
a soft toy for dog
more
Sep 24, 2020 19:25
#14 strawberry with a magician hat by aakashbhoi
Hey , here is a cute strawberry model with a very good smile and having a golden hat because of shiny cap dogs and their masters are going to love it .
more
Sep 23, 2020 17:49
#13 Fruit Dog Toy Design (pink Pear) by edward m barnes
Sep 19, 2020 14:57
#12 Fruit Dog Toy Design (yellow Pear by edward m barnes
Sep 19, 2020 14:55
#11 Dog Toy 1 by Leo_CAD
Dog Toy 1
more
Sep 16, 2020 5:48
#10 Fruit Dog Toy Design (red watermelon) by edward m barnes
Sep 12, 2020 18:19
#9 Fruit Dog Toy Design (yellow watermelon) by edward m barnes
Sep 12, 2020 18:17
#8 Apple Smiling Dog Toys by Chaniago
This apple dog toy is made of super soft material, has three types of sounds that will come out when bitten or squeezed. For a complete detailed description you can see in the attachment.
I am waiting for suggestions and feedback regarding this design
Hope it can be useful
Thank you
Regards,
Chaniago
more
Sep 11, 2020 8:32
#7 Smiling Banana Dog Toys by Chaniago
Banana Dog Toys are made of soft cloth and are safe when bitten by a dog. Equipped with 3 different types of sound. The combination of colors can follow market desires. More details are listed in the attachment.
I will waiting for suggestions and feedback regarding this design.
Hopefully this can be useful.
Thank you
Regards,
Chaniago
more
Sep 8, 2020 19:21
#6 Aubergine (eggplant) Design 1 by TAC Design
This is just a draft work-in-progress.
The idea is that the aubergine (or eggplant) is in two halves with a space in the middle to hold a treat (not shown/realised). I had the idea of holding the two halves together with long arms attached to one half which then wraps around the other half and is fixed in place by velcro. I will submit the complete concept soon if iterested.
more
Sep 8, 2020 0:18
#5 Dog Toy Fruit(Orange)-DC-1-02/09/2020 by sharad_prateek
Hi,
Uploading my first concept. Please find the PDF describing the different elements in the zip file uploaded and let know what you think about it.
Thanks for the opportunity.
Sharad Prateek Singh
more
Sep 2, 2020 13:38
#4 BlackBerry fruit toy dog by vipulp
Dear sir
hi
I have made black berry fruit dog toys . please see and give feedback.
Thanks and regards
more
Sep 1, 2020 9:52
#3 Fruit Dog Toy (themed) Banana Peel - ver01 by Gregorius Giga
Hi EmeraldHillStudios,
This is my first concept according to your specs. I have attached Original Resolution Rendering Image and the STEP File to help you check the model. Hope you like it. Please tell me if you need some modification, and please give your feedback.
Thank you, Giga
more
Aug 29, 2020 18:22
#2 Orange dog toy design by Archee
This orange fruit dog toy design consists of three arts, the top leaf part, the top layer part, and the bottom layer part. The microphone will be placed in the leaf part which will be made of tough nylon will have a button mechanism and will speak out "eat me!" when pressed or chewed. In fact, all three parts can be made out of tough nylon. The leaf can be used as a part to hold to detach the top orange layer from the bottom one. As seen in the attachment, the top layer has a special interlocking mechanism with the bottom layer; the top layer has small ridges which interlock with the lits in the bottom layer, to keep the orange intact, so when the top layer is lifted using the leaf, the bottom orange layer opens up like the petals of a flower. The inside of the bottom orange layer can be used as a storage for dog treats, and when the top layer is lifted, the bottom layer opens up and acquires a bowl - kind of shape with dog treats inside.
more
Aug 29, 2020 10:26
#1 Dog toy with teething and by Ruby W
This is a soft dog toy that contains three parts.
The first part is the middle part of the banana which could be made by durable natural rubber or tough nylon or double-knit rope. I think we should use some not that soft material so that the dog could do their teething with it.
The top part which seems to be mesh is a bag woven with double-knit rope with a relatively large hole. The top of the bag could be opened and put some bigger dog food inside and when the dog peels the peel of the banana and chew the dog toy, the food will be bitten to smaller pieces. and when the food is small enough, it will come out of the hole and then it can be eaten by the dog. we need to fill the bag when it is empty for sure.
The top part would have the peel which would potentially be held up to the stem by Velcro as intact and the dog would have to peel it with his/her teeth to eat the dog cookie or anything inside the nylon bag. The bag's material could be always discussed to make it more durable if you have any better ideas.
And of course, we could embroider a name on the peel of the banana since we will use the tough nylon as its material.
The third part is the bottom part which could have a small recorder mechanism inside so that when the dog bit it, it will have a " Peel Me!" voice. The " Peel Me!" voice could be recorded by the dog's family so that the dog will be happy when they hear it. But, to be honest, since the electronic equipment is generally not so strong to withstand the bite force of the dog. Even it is not so hard for us to design and include this little trick in the product, it might not be that durable. I actually do not recommend it.
The banana could be made 7 in for small dogs, or 14 inches for the big one. Any color could be used as long as the customer likes, but I suggest yellow because first the yellow is the normal color of a banana, second the dog could only recognize yellow, blue, and grey.
I did not include the eyes and the mouth in this version of the design, but if you like I could always add it when it comes to the detail.
Please let me know if anything you would like to discuss for this design. Please let me know if you like it or not. we could always discuss to make it a better design for you.
Thank you!!
Sincerely,
Ruby
more
Aug 29, 2020 5:31

Discussion

edward m barnes

Designer

Sat, 10 Oct 2020 15:48:10 +0000
So EmeraldHillStudios did you make a decision on the Fruit Dog Toy Design yet

joshuam1

Designer

Sat, 26 Sep 2020 18:44:17 +0000
What kind of file type or deliverable are you wanting?
Mon, 31 Aug 2020 15:40:20 +0000
Hi Emerald. please prepaid the contest, else we won't be able to send you our designs. Thanks!!
Fri, 28 Aug 2020 18:22:20 +0000
banana, apple, orange, and any others

sharad_prateek

Designer

Fri, 28 Aug 2020 17:23:02 +0000
Hi,

Is there any specific set of fruits that you want us to design or we can make any fruit we want?
Please let us know if there is a specific set.

Thanks for the opportunity.
Sharad Prateek Singh

Similar Contests on Cad Crowd

Design of a new Robotic Character t
Hi there, We are a small robotics startup that develop robotic toys. While we are able to do all the mechanical, electrical and software development, we do not have any artist onboard to make our robots look fantastic! So we are looking for someone with expertise in 3D modeling and product design. This is not a one time gig, we are looking for someone we can collaborate on the long term. Your job will be quite simple: We will provide you a CAD model and you will have to design around it to make it look nice according to our directions. For each project, we will expect to first see some sketches (you ll have 1 week for that) and then once we have reviewed them and pick one, you will be designing the 3d model (2 weeks for that). The first project will be to design the shell of a humanoid robotic toy. Again do not send anything till we have picked someone and provided CAD model and design directions. In order for us to pick someone we will need two things: - First, the more robot design you have in your portfolio and you can show us, the better we can appreciate your style and capacities. - Your hourly rate or per project rate. We are quite in a hurry to start the first job, so please reply quickly. Thanks!
Simple Miniature Racing Car for STEAM Learning
We have a few STEM / STEAM (science and tech courses for kids) programs we are designing for, including a miniature radio controlled race car, and a miniature radio controlled racing drone. They should run off of a single rechargeable A or AA battery, and we have the basic body shape. Need designs for the computer controllers (Arduino or similar), software, simple radio remote control and system, electric motor systems, and drive systems engineered. We have the basic frame shape. We are looking for simple, field serviceable designs that kids can take apart and put together and use to learn these technologies. Just like everyone, we want it ASAP. What can you offer us?
Simple Miniature Racing Drone for STEM / STEAM Learning
We have a few STEM / STEAM (science and tech courses for kids) programs we are designing for, including a miniature radio controlled racing drone. They should run off of a single rechargeable A or AA battery or rechargeable easily found (commonly available) battery. Need designs for the computer controllers (Arduino or similar), software, simple radio remote control and system, electric motor systems, and drive systems engineered. We have the basic frame shape. We are looking for simple, field serviceable designs that kids can take apart and put together and use to learn these technologies. Just like everyone, we want it ASAP.
CAD design for foam stress toy mould
Hi - We're looking for two designs for lightweight foam/rubber stress toys designed in the shape of a beach sandal AND a house shoe. Your designs will be used to create a mould for both toys. The size of each shoe toy should be no larger than 5.5cm wide, 12.5cm long, and 5.5cm high. See the attached image for example.
Training Ball & Sci-Fi Env
I have two models that need to be made for an indie game I'm building. The first is a simple orb thing that levitates and will shoot lasers. The second is a temple training like facility. Orb: I'm creating a game that needs a sci-fi training orb that'll levitate around, and fire lasers. I've done a very crude sketch (attached) to help you understand what I'm envisioning. Temple Environment: It should feel like a wide open space that also seems a bit "sacred". I've provided another crude drawing of what I'm envisioning. I have a couple of tweaks about it though, I'd like the ceiling to be much higher and there to be pillars holding on the lights instead of them just hanging on the wall. And the windows to be about 75% of their thickness and taller.