Safety Glasses Clippable Heads-Up Warning DeviceBlind

in Wearables Design held by John Tom
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
Design a product concept for a warning system which clips to a users safety glasses to provide audible and visual warnings of nearby workplace hazards. Module should clip-on existing modern safety glasses. There should be a warning light in the user’s peripheral vision and speaker aimed down towards users ear. (Optional) forward facing flashlight. Include 1 push-button for “snoozing” warnings, and another push-button for the flashlight.
Wants:
• Communicate often to ensure I like the direction you’re going.
• compact, slim, and discrete
• modern high-tech look
• Novel/unique method for clipping to safety glasses
• Uses functional visual and audible warnings.
• follow product description (unless you have some wild amazing concept, then run with it 😉)
Don't Wants:
• Big Bulky designs.
• Don’t just post a final submission the final day of the project. Start with a conceptual sketch, I will provide feedback and we’ll go from there. Stay in communication before you spend a lot of hours on the design in CAD.
• Design which incorporates the device into the glasses – design a clip-able module which clips to existing modern safety glasses.
Software:
  1. SolidWorks

Entries

= Buyer's Rating
#28 Concept 1 Extra by studio701
Jul 20, 2020 13:13
#35 Concept Design Board by Jinen Sheth
Jul 23, 2020 11:13
#38 Concept Design by Jinen Sheth
Jul 24, 2020 8:34
#16 EVN_Headup_WD2 by EVN
Jul 15, 2020 18:35
#15 Clippable Heads-Up Warning Device by Quantum_Designs
Jul 15, 2020 14:57
#9 safety glasses Warning device by AS2695
Jul 11, 2020 5:27
#7 Mount by benjamino
Jul 8, 2020 21:29
#37 Safety Glasses by Mahdaoui Houcin
Jul 24, 2020 4:09
#43 Safety Glasse by Mahdaoui Houcin
Jul 26, 2020 18:40
#34 Heads-Up! by Alfaraco
Jul 22, 2020 22:29
#31 Clippable Heads-Up Warning Device by Quantum_Designs
Jul 21, 2020 9:41
#45 Safety Glasse by Mahdaoui Houcin
Jul 27, 2020 2:48
#2 Safety Glasses clipable warning device by Saurabhverma
Jul 3, 2020 12:25
#3 Safety Glasses Concepts by studio701
Jul 5, 2020 22:42
#4 Safety glasses clip able heads up warning device by Saurabhverma
Jul 6, 2020 15:22
#5 Safety Glasses Heads-Up Warning Device Draft by Pablo Gosso
Jul 7, 2020 13:25
#21 Clippable Heads-Up Warning Device by Quantum_Designs
Jul 18, 2020 16:29
#19 Safety Glasses Clippable Heads-Up Warning Device by Panji Firmanul Hakim
Jul 17, 2020 13:35
#17 Clippable Heads-Up Warning Device by Quantum_Designs
Jul 16, 2020 12:21
#6 Safety warning light glasses by eduardoo
Jul 7, 2020 19:22
#10 Safety Glasses Warning Device by Krisnadi
Jul 11, 2020 9:06
#12 detachable module for modern glasses by Aradhya Purohit
Jul 12, 2020 9:30
#8 models 3 and 4 by eduardoo
Jul 9, 2020 18:06
#11 Clippable add-on r0 by KunalGour
Jul 12, 2020 7:11
#22 Safety Glasses Clippable Heads-Up Warning Device _ Rev 1 by Panji Firmanul Hakim
Jul 19, 2020 5:40
#33 Sixth Sense by alexv1
Jul 22, 2020 21:31
#23 Safety glasses clip able heads up warning device. by Saurabhverma
Jul 19, 2020 9:15
#1 CONCEPT by benjamino
Jul 3, 2020 8:04
#48 EVN_Headup_WD2 by EVN
Jul 27, 2020 18:16

Discussion

Showing last 20 comments - View All

Quantum_Designs

Designer

Sun, 26 Jul 2020 18:46:46 +0000
Noted Mr. John, Thank you for ratings :)

John Tom

Buyer

Sat, 25 Jul 2020 23:33:40 +0000
Hello All,

I've got a lot of great results, so I will be closing this contest a few days early next Monday 7/27 at 1pm PST. Please be sure to submit your final concepts by then!

JT

Quantum_Designs

Designer

Tue, 21 Jul 2020 09:44:21 +0000
Hello Mr. John,
Please check "Reattached" CLEAR IMAGES of concept sketches,
Concept 8, Concept 9, Concept 10, Am I heading in right direction ?? :)

Quantum_Designs

Designer

Tue, 21 Jul 2020 07:35:54 +0000
, Hello Mr.John, Please check attached concept sketches, Concept 8, Concept 9, Concept 10

Quantum_Designs

Designer

Mon, 20 Jul 2020 16:56:43 +0000
warning light in the user’s peripheral vision AND Flash light can be set in same direction ? OR Does they require separate Lenses ?

Quantum_Designs

Designer

Mon, 20 Jul 2020 16:47:07 +0000
Hello Mr. John attached 1 more concept, requesting your valuable review and advice, Good night :)

Quantum_Designs

Designer

Sun, 19 Jul 2020 16:47:43 +0000
, , Hello Mr. John attached 2 more concepts, these clips will be durable, am I heading in right direction ? requesting your review and advice, Good night :)

Quantum_Designs

Designer

Sat, 18 Jul 2020 16:40:17 +0000
My Designs are , , ,

Quantum_Designs

Designer

Sat, 18 Jul 2020 16:36:52 +0000
Hello Mr. John, Submitted few concepts, your feedback is highly required, am I heading in right direction ??, Is there any missing elements in design ??, Please let me know for any corrections, you can mark/highlight changes required, Thank you, Umar :)
Fri, 17 Jul 2020 13:36:34 +0000
I just made a concept design

John Tom

Buyer

Wed, 15 Jul 2020 19:26:46 +0000
Please use the comment section for overall project questions. If you have a personal question, please PM me :)

Steven wijay

Designer

Wed, 15 Jul 2020 15:59:27 +0000
Hi John, How are you ? Im start to enter this project. :D

Krisnadi

Designer

Sun, 12 Jul 2020 06:38:52 +0000
Helo John,

I have sent a simple design for this project
Did you chect it
I hope you to check it and give me a suggestion regarding my design, so I know what you want

Regard,
Krisnadi

John Tom

Buyer

Sun, 12 Jul 2020 05:15:46 +0000
Hi Milivoja,

Who said anything about design and production?? :D

This project is simply for overall product concepts. Drawings will suffice, but most people work best in CAD.

John

milivojastudio

Designer

Sun, 12 Jul 2020 01:50:05 +0000
Hello John,
I hope that you do not think that 600$ is enough to design and produce a product. Entering on this platform I can't believe that you can even offer this amount. The concept of product is core and that's the hardest part of it rest is already known.

Thanks,
Milos

John Tom

Buyer

Sun, 05 Jul 2020 20:56:09 +0000
Hi Mec. Des.,

We're just working on the overall exterior design concept for this project. Future projects may cover these topics if a good aesthetic design is reached.

The design would incorporate multiple sensors used to sense hazards at workplace environments along with visual and audible warning capabilites. The design would use a rechargable battery. As to what sensors are being used I cannot say.
Sun, 05 Jul 2020 20:36:42 +0000
Which hardware besides the peripheral light, speaker and battery compartment holder needs to be integrated within the device ? Are there any PCBs or any other electrical/control components that need to go there that would actually ensure the functionality of device ? Or mb you have already defined the interior volume that would be used by inner electronics ? If so could you please share the size of it, I cannot seem to find it anywhere in your description.

John Tom

Buyer

Sun, 05 Jul 2020 20:21:15 +0000
Hi Jad,

The design needs to be slim, compact, and fit on the safety glasses easily. The device should be extremely welterweight so the user doesn't notice it. Material should be plastic.

Clippable Heads-Up Warning Device: A device which clips onto safety glasses to give the wearer visual and audible warning for workplace hazards.
Sun, 05 Jul 2020 16:08:42 +0000
Hi John,
I would like to know if there is any other specific requirement for the design that is needed as like about the shape and the material that is to be used for the safety glasses.
And secondly, I would like to about the term "Clippable Heads-Up Warning Device" could you please elaborate on the term in particular?

John Tom

Buyer

Fri, 03 Jul 2020 20:39:31 +0000
You may design the device into the safety glasses, but the detector must be able to detach from the glasses and be use as a hand-held device.

Similar Contests on Cad Crowd

Sports Timing Transponder
We have designed a 2.4 GHz transponder that is used for sports timing. We require a plastic housing to be designed for this small wearable device. The PCB has a solar cell on one side and a small 40 mAh LiPo battery on the other. The transponder is used in running, cycling and Triathlon type events, so we need it to be completely waterproof, we prefer that the unit is ultrasonically welded to form a hermetically sealed product. The transponder will need to worn by runners, attached to bicycle forks, attached onto ankle straps, etc. An approach we would like to take with the design is to allow for the transponder itself to have a minimalistic design with a universal mounting option that allows for it to be attached to a separately designed Bike mount, or wrist strap. Ie: the Bike Mount would be a separate design that cable ties (zip ties) to the front fork of a bicycle, then the transponder clips onto or locks into the bike mount. This would allow for future designed mounting accessories, while keeping the transponder design standard. The design considerations include: - The housing must be completely waterproof (Hermetically sealed). We would prefer that the unit is sealed with ultrasonic welding. - We use a solar cell on the top of the PCB to charge the small LiPo battery, so there should be a transparent section in the housing to allow for light to reach the solar cell so that the LiPo remains charged. I have attached an image of the transponder as well as an STL file of the PCB Assembly. We can send further information and output files as required.
VestXX
Video camera mount
Wearable Pill Storage and Managment
Hi Everyone! We are excited to see what the community comes up with! Thank you for your amazing designs. Please let me know if you have any questions. Overview: In essence, it's a bracelet that holds multiple days worth of a medication and has some of our custom hardware in it. (hardware is roughly .5" by .75", but will become smaller in the future). Please see sketches for further information Design: We would like to be able to store different types of pills in different parts of the bracelet. I've included some very rough concepts of my own, but I am by no means a designer or artist and need help figuring out the best way to do this. The CAD image is something that I quickly made for a first prototype a while ago. It is inefficient in terms of storage and very clunky - not what we are going for. An innovative design is the primary thing that we are looking for. We aren't particularly concerned at this point in time if it has fancy waves on the outside, crystals, or beveled edges. It is still important for the bracelet to be aesthetic, but the "jewelry" aspect of this can be done at a later time. It is far more important that we maximize the number of pills that it can hold without having a massive and uncomfortable bracelet. Furthermore, one concept that we are considering is to have a core bracelet that has our hardware in it and then supplementary 'bands' of the medication. We are open to other design options if you think you have something more optimal! If you only have one medication, then there either would only be one band or there can be place holder pieces/blanks that would go in the places if you were to have multiple medications. Mechanisms: Access to the pill should be fairly user friendly. I've thought about many different designs, all ranging from individual compartments with covers, one large cover that snaps over, a sliding cover, and even a spring loaded mechanism that pushes out the pills one at a time. I understand that it will be a bit more difficult to make this bracelet compact. Ideally it would hold 1 weeks worth of medication. With that being said, it would be even better if the bracelet held multiple medications, but that is more pills. Pills: The type of pill is something that we're currently working with. The larger pills are about 22mm in the greatest dimension. Most pills are circular or oval shaped. The median is approximately 15 mm. Things like birth control, heart medication, seizure medication, etc.
Hard-Hat Clipable Safety Notification System (#3)
Please help us design our next-generation hard-hat mounted safety system which provides visual and audible alerts to the user when they are approaching danger. **PROJECT FILES ARE ENCRYPTED** The project files are encrypted using 7-Zip, a free encryption and zipping application. Please message me and I will give you the password to open the project files. Once I share the password with you, please keep it private and do not share it with anyone.
Create Ten Custom Glasses
Submit 10 OnShape assembly files (each pair of glasses must have a unique front part but should have the same arms) Each one should be a different style (See attached photos for styes.) (1)Aviator (1)Cat eye (2)Oval (2)Round (2)Square (1)Kids (1)Other - be creative! Submit 5 renderings of each pair with clear and dark lenses (10 renderings total) with the following views: *Head-on *45 degrees *side view *overhead *ISO) *******IMPORTANT******* This design must be easy to modify. The workflow and feature organization of the parts is as important as the final shape. The following two measurements should be driven by a single variable in OnShape: https://cad.onshape.com/help/Content/variable.htm *the width of the glasses *the bridge of the glasses These two dimensions should DRIVE the width of the frames. When the width of the frame changes its shape should scale uniformly to accommodate the change. See the attached picture for a better explanation. You can submit your glasses with dimensions anywhere in between the max and min. Just make sure the glasses still look good at the max and min sizes. (Scale all dimensions down by 20% for kids glasses) Arms and Hinges **please keep these designs the same for all of the glasses. The straight part of the arm should also be driven by a variable. Keep the curved part by the ear the same. "picture" example: ___/ will be lengthened to look like _____/ The hinge design should be based on the attached picture. However, there should be countersinks on the top and bottom of the hole to accommodate this screw with a 6mm shaft length. www.zoyeglassesparts.com/spectacle-screws-internal-thread-m-1-4-2-5mm-height-tsn-007.html Please use the "hole feature" when designing the hole and countersinks so they can be modified later if needed. These do not need to be driven by a variable. Lastly, these will be plastic hinges, the nose pads should be part of the plastic frame and do not need to be easy to edit. (see picture) Please feel free to reach out with any questions.