7th Street Food Truck ParkBlind

Bone Conduction Sound System Spearkers Wireless Bluetooth Phone calls with built in mic Name Logo is a touchpad control on the right side. With the touchpad you can control your music playlist. Hidden USB Port Sunglasses Shape- Aviator Pilot Unisex Renders of 3 colors

I require the design of a range of sizes of Olympic weight plates for Olympic barbells. The sizes are to be 2.5, 5, 10, 15, 20, 25kg. Made from cast iron, 7.2 density iron. The two side handles are to be 35mm diameter and for the 25kg weight the handles to be 180mm in length and less for the smaller weight plates so around 100-120mm for the 2.5kg. The hole in the centre needs to be exactly 50.8mm diameter. The main area in the central area is 25mm, and the 35mm area around the outer edge is 35mm depth. The colour is a satin/matte black. Each weight identification number and logo area needs to be raised/embossed by 3mm with no extra colour just the same black colour.

1. To scale metric Site Plan (showing new layout of sunroom and decks) (revise from existing plan not to scale) Foundation plan, floor plans, deck plan, roof plan, elevations (3), Section & section details (revise from existing drawings) New drawings for an upper deck (measurements provided) with side spiral stairs

Required is to convert original architectural sketches into layered DWG drawings. The unit of interest is the first unit from right to left and the work can be limited to re-drafting of plans and details only for this unit. Details from mid units must be used to overlay details for the unit of interest (as the original drafter provided greater details that apply for for all units only on the 2nd, 3rd of 4th units)

We were very happy with the results from our first design concept competition so we decided to host another Cad Crowd competition but focus more on designing to a specific PCB and shape this time. We're looking for small, sleek, manufacurable, and aesthetic designs for a hard-hat clipable safety notification system for construction workers to improve their work safety. The device can sense dangers with internal electronics and alert the user real-time using light and sound notifications. The device will be clipped to the under-side of the hard-hat (see attached image "placement.png"). The device has LEDs along the curved portion of the PCB and two side-fire speakers to convey dangers to the user (see attached image "PCB.png"). There is a snap-dome push button on the right side of the PCB. Please design a fused rubber actuator for the snap-dome. Assembly: The front case will have 3mm screw bosses. The clip slides over the boss, next the PCB, then the back case, then a screw to hold it all together (see attached image "assembly.png") . The project will be pre-payed once there is 3 quality design entries (including CAD files).