Garza BuildBlind
in
3D Modeling Design
held by
Marco Guillen
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
Attached is a survey for a new pool build that I will be working starting soon. I've also included a survey with a rough outline of pool. Client is looking for around 95 linear feet, no spa. You'll see two boxes which are columns with fire bowls and an 18" raised wall between the two columns. In the area that protrudes out will be a tanning ledge. Depth will be 3.5" to 5" going from the back of property towards the front. Travertine coping around pool, stacked stone on raised wall. If you have any questions, please let me know.
Wants:
Will need smart data and pool specs as well.
Software:
- Pool Studio
Prepaid PrizeEntries
1st Winner
#2 Garza Pool
by Sara in TX
Download Files
#1 GARZA POOL LAYOUT
by Jim81
Download Files
Discussion
An energy efficient pool would be insulated, and have circulation pipes that run under the pool to keep it from over heating. It also needs a really good cover. My neighbor&
;s conventional pool set up costs him about $180/month for electricity and propane or natural gas. You would save that cost. Rectilinear designs are easy to insulate, curvilinear is more expensive because you have to spray the closed cell polystyrene, or what ever you use.
;s conventional pool set up costs him about $180/month for electricity and propane or natural gas. You would save that cost. Rectilinear designs are easy to insulate, curvilinear is more expensive because you have to spray the closed cell polystyrene, or what ever you use.
Why does the drain have to run all the way from the pool (backyard) to the street, where I assume it connects to the city service drains?
Similar Contests on Cad Crowd
OMD/PepsiCo Award - 3D Project Rendering
Please see attached brief for full description of project.
Wall angle
This is a prototype of a wall angle, I need autocad drawings to manufacture this piece.
furniture
wood working projects
Ecig
Hi everyone I have a cad draw of a battery case for a 18350 efest battery and I need some work in there to take it to production I need measurements and specifications of each part the battery dimensions are 18 mm diameter and 35 mm length
Basic Project
I have a project for you. Contact on 9831039592
PalmSpringsSketcher