Description:Please see attached brief for full description of project.
Wants:Brief will explain all criteria.
- For printing capabilities
No Comments Submitted Yet.
Similar Contests on Cad Crowd
I need to make a companies Logo into a 3d model that would have the ability to be 3d printed in color sand stone and clear resin so there would be two separate STL files one of which would be a color stl file
3D modeling of a J-shaped massage tool, much like a Theracane only smaller in dimensions. The tool should be modeled as close as possible to the attached images. The straight portion of the J-shape is approximately 10 inches long and 3/8in in diameter. The hook portion of the tool should form an approximately 180 degree arc and terminate in spherical end of 9/16in diameter. The handle, at the top of the J-shape, should be approximately 3/4in in diameter. The attached jpg images are of the actual tool that I would like modeled and should give you a good idea of it's dimensions. The png file should also provide a good reference. Thanks.
Industrial Safety Glove Design
TPR (Thermoplastic Rubber) Protection Zones for Work Gloves We are an industrial work glove manufacturer and one of our main products are gloves with TPR moulded zones which are applied to the back of gloves (either sonic/heat or sewn) to provide protection from knocks, bumps, bangs, compressions etc. Gloves are widely used in the offshore Oil and Gas sector along with mining and automotive sectors. The TPR zones are primarily to protect the fingers, knuckles and metacarpals within the hand – see attached image. We have several mould designs already, attached are two samples TPR1 and TPR2 and we are looking at a new mould also attached named Karbonhex which is based on an Hexagonal pattern/design – the inner hexagonal design is okay but the actual outer/outline needs a redesign to also make it more hexagonal…. This is as much about esthetics as functionality!
From 2D to 3D
Please make this old 2D drawing in to 3D drawing - with correct meassures. When it is done, I also need to have a drawing of the same tool - but where the top is blank. Meaning that there is no - thread - so we can cut the thread afterwards. It is attached as the M14 drawing.
2014 Burning Man Mutant Vehicle Project
Concept designs for 2014 Burning Man Mutant Vehicle Project based on 26’ GMC Motorhome with a stegosaurus appearance. Design must radically alter the exterior of the base unit while minimizing the costs and difficultly of the alterations. Winning design will move forward to more work on mechanical design for the build out.