Realistic power generator renderingBlind

in 3D Modeling Design held by GabrielGP
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
Needed: a high-quality photo-realistic 3D model of the genset. Attached photos are for reference as these are some of the views we want.
Apply company logo (provided) and KW ratings (50,65,80 and 100)

These are the views we need,the first six we need urgent, others can wait
1. Isometric
2. Front (doors closed)
3. Back (doors closed)
4. Back (control door open)
5. Left side (doors closed)
6. Right side (doors closed)
7. Dimetric
8. Left side (doors open)
9. Right side (doors open)
10. Top view (doors closed)
11. Top view (doors open)

Examples of quality of work that we need:
www.fgwilson.com/en_GB/products/new/fg-wilson/diesel-generator-sets/large-range-730-kva/1000005024.html

www.fgwilson.com/en_GB/products/new/fg-wilson/diesel-generator-sets/small-range-220-kva/1000029040.html
Wants:
High quality work that includes all requirements and meets expectations of design details
Additional Information
3D model is ready, only need to have high-quality photo-realistic renderings made |
We have uploaded a pdf with feedback and additional details/instructions....here is a link to the file for inside of the enclosue: we.tl/BqeDowvDE0
ATTENTION: Please look at the new JPEG we have uploaded. It has details about a rendering error that should be addressed. It refers to the corners of the generator set (one is "out" and should be fixed to look like the one shown on the image on the left!

Entries

= Buyer's Rating
#35 Internal views by handsketcher
Aug 5, 2018 16:57
#30 Realistic power generator rendering (Part 3/3) by BL-Nauticals
Aug 3, 2018 15:51
#28 Realistic power generator rendering (Part 1/3) by BL-Nauticals
Aug 3, 2018 15:40
#26 POWER GENERATOR by FALKOR
Aug 2, 2018 18:24
#21 Realistic power generator rendering by RRM
Aug 2, 2018 3:02
#8 V2 by handsketcher
Jul 31, 2018 20:32
#13 Thin end of the wedge by GodInventor
Aug 1, 2018 6:51
#33 Realistic power generator rendering by Ratnesh
Aug 4, 2018 19:08
#31 Realistic power generator rendering by AIT OUFKIR Yassine
Aug 3, 2018 20:14
#29 Realistic power generator rendering (Part 2/3) by BL-Nauticals
Aug 3, 2018 15:43
#27 Power Generator_Isometric 50KW by Krisnadi
Aug 3, 2018 10:31
#1 Proof by jnatzic
Jul 31, 2018 1:28
#25 Genset Renders as requested by General Power by skudwoofer
Aug 2, 2018 17:26
#24 Genset Renders as requested by General Power by skudwoofer
Aug 2, 2018 17:22
#18 GP18 Iso by Les Orton
Aug 1, 2018 16:21
#43 Realistic power generator rendering by Harjeet Sharma
Aug 6, 2018 15:29
#19 render1 by DesignAssist
Aug 1, 2018 17:29
#47 Realistic power generator rendering by RRM
Aug 6, 2018 18:40
#50 Realistic power generator rendering by RRM
Aug 6, 2018 19:11
#45 power generator rendering by m.abdelmalek
Aug 6, 2018 18:26
#38 POWER GENERATOR by FALKOR
Aug 5, 2018 20:44
#32 Realistic power generator rendering by Strategic C-A-Design
Aug 4, 2018 17:23

Discussion

RRM

Designer

Sat, 04 Aug 2018 16:49:11 +0000
Hi,
Thanks for the reply .
if you don't mind i have one more suggestion that to rate individual projects submitted. From the designers side it would feel good to know that you have spent a little time to check our work.otherwise we feel like wasting our time.
even if it is lesser rate we can try to make it better.
And also I understand the cad crowd is the place where "contests" are going on, so we participate our best and you choose your winner. :)
thank you

GabrielGP

Buyer

Fri, 03 Aug 2018 21:42:27 +0000
We have just added another file. It addresses a rendering issue with the generator set corner. The right upper edge is pointing outwards and should be flat like the one on the upper left. Please refer to image for details.

GabrielGP

Buyer

Fri, 03 Aug 2018 20:58:32 +0000
In the process of posting an update on the project. Will include some feedback and additional details along with files for inside of generator

RRM

Designer

Thu, 02 Aug 2018 16:00:52 +0000
Hi,
you didnt rate any of the project. Are you still on this project??? or you didn't find any satisfying result??
It will be better if you give feedback , and it will help us to modify or improve our designs.
thank you
Thu, 02 Aug 2018 11:56:41 +0000
Hello! Please hold the contest open until the specified deadline. Also, is there something supposed to be visible inside when the doors are open? The way I see it, it's just the casing. Thanks!
Wed, 01 Aug 2018 11:54:52 +0000
Work in progress... please wait the end of the normal contest deadline.
Wed, 01 Aug 2018 09:04:14 +0000
Working on the renders. Results will be here before the deadline!

Design Territory

Designer

Wed, 01 Aug 2018 02:14:31 +0000
Working on the open door versions of the renders. Please do not close the contest prematurely.

Similar Contests on Cad Crowd

Tankless water heater
Design a tankless water heater. Something different yet pleasing to the eye. If it was in your home, Laundry room, garage, utility closet. Something futuristic, yet simple and doesn't stand out too much. No buttons or LCD screen. Can have LEDs and so forth to make the design better and stand out a little. The file will need to be able to convert and use. 3D model this and then put it into 3d rendering to make it look good. Use what software you want long as we can utilize the file for later purposes. First place will continue working with us on the design for including full case design for manufacturing, and other renderings of the design along with the inside for mounting parts. For now, we are looking for the best design and someone that will be able to help in the area listed above for future work.
Design A computer Enclosure for me.
I need a computer enclosure (Case) designed, it will house a full ATX computer board, graphic card, RAM, CPU & PSU. It will be made from sheet metal (AI) for better thermal dissipation, has to be easy to access all hardware for upgrade.
Convertible Eyelash Curler
The goal is to design an eyelash curler that has easily swappable parts. The 2 swappable parts are: Top Plate and Rubber Holder. Curler parts can be metal, plastic or both. Features: - The fewer number of total parts the better - Open field of view - when the curler is in open state (handles are separated), nothing obstructing the field of view of the eye. But once you bring the handles of the curler together and the curling mechanism closes, it ok if the there are obstructions then. - The Top Plate must press onto the rubber with a pretty good force, so the mechanism cannot be "weak" Design cannot be the one that already exists by googling it.
New best smart collar
We at wizbond want to make a device that will help dog owners in various tasks and measurements.  Think smart collar, but better. Our key features are: 1. GPS locator using LaRoWan technology and powered by Helium blockchain infrastructure. 2. Geofencing, using our app allows dog owners to configure the virtual fence where the dog is supposed to stay. Once the dog leaves the perimeter the app will send a notification to the owner informing him about it 3. Temperature sensor to know what is the temperature of the dog and whether the dog is sick or just in a hot environment 4. Accelerometer to know the position of the dog ( standing, lying, running, and so on )  5. “Collar off/on”. We want a sensor that will show whether the collar has been taken off or not 6. A small speaker. To be able to send sound commands to the dog remotely. Think asking your phone to call the dog and the dog began to hear the voice of the owner saying something like "come back”. This feature is expected to be used in pair with training courses for the dogs.
SFF Vertical Case (mini ITX)
Hi :) This contest is for a small vertical mini-ITX computer case with the following specs/requirements: - Aluminium (3mm thickness for single parts like panels or beams) - MUST BE PRODUCIBLE WITH CNC (one side milling) - EYE CATCHING FRONT PANEL - something like the Mac Pro but different ;) - All panels must be liftable - The panels must be fixed with an easy mechanism yet align correctly - Screws, pins and so on should be stock/standard parts only - Footprint should not exceed height: 400mm width: 200mm length: 300mm - Airflow is important and should be front to back and bottom to top - Panels should accommodate this airflow (holes or other pattern) - Front accept 2x 120-140mm fans - Back should accept 2x 120-140mm fans or a 240mm radiator - Bottom or top should accept at least one fan - SFX, SFX-L or ATX PSU - CPU cooling via water block or radiator+fan - 3 slot GPU with 315mm max. length - i/O can be mounted vertical (up/down), to the back, use a second cover to keep a clean look of the top and so on... you're free to choose Visual style: NZXT H1 meets Mac Pro :)