Setra Nano Design OptionsBlind

in 3D Modeling Design held by Boxborough
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
There is an attached image of a new product concept, which is essentially a wall-mounted sensor that shows a light ring indicator of red or green. The product is designed to cover a single-gang US electrical wall box, similar in size to a wall switch. Once wall-mounted, it stands off the wall about 10 mm, where the light ring can be visible from front or side. We want some industrial design options to look at that are different from our design.
Wants:
Today, what we have for a design can be viewed as "a hockey puck on a wall plate." While this may function as intended, we want options for a refined look that: 1) shows a light ring stand-off of 8-10 mm so it can be seen from the front or side (light pipe be round, oval, or square). 2) covers a US single-gang wallplate (no larger than 77 mm W x 123 mm H). 3) does not look like "a hockey puck stuck to a cover." 4) has qualities where the plate that covers the wall box is integral with the protruding light ring. 5) The overall product should not exceed the dimensions noted above. Show us some interesting designs that achieve this criteria, but are outside-the-box thinking. Think of something like the coolest looking fire & smoke detector you have ever seen.
Don't Wants:
We don't want anything that looks like a hockey puck stuck to a wall plate. It can not be flush to the wall; there must be some stand-off from the wall surface between 5 mm and 10 mm (but no more than 10 mm).
Ask for Sample:
The best designers are the ones willing to submit minor alterations as sample refinements without additional charge.
Software:
  1. SolidWorks

Entries

= Buyer's Rating
1st Winner
#27 Setra Nano by Mahan
Mar 13, 2018 23:46
#30 Setra Nano_S_D_06_01 by Dahmoun
Mar 14, 2018 5:43
#25 Wall Mounted Sensor by Olaolu
Mar 13, 2018 19:32
#29 Concept by AakashP
Mar 14, 2018 4:43
#34 Setra Nano V04 by EditKA
Mar 17, 2018 16:34
#35 Setra Nano V05 by EditKA
Mar 17, 2018 16:49
#36 Wall Face Plate by adev95
Mar 17, 2018 18:02
#37 Setra Nano Design by adev95
Mar 17, 2018 21:48
#38 Setra Nano_S_D_FINAL by Dahmoun
Mar 17, 2018 22:22
#3 Setra Nano V01 by EditKA
Mar 9, 2018 14:10
#4 Setra Nano Design Options by Mahbub
Mar 9, 2018 19:29
#7 Setra Nano V02 by EditKA
Mar 10, 2018 14:56
#8 Setra Nano V03 by EditKA
Mar 10, 2018 14:58
#10 Idea1 by handsketcher
Mar 10, 2018 20:38
#1 LightRing00 by nyles
Mar 8, 2018 19:40
#13 Setra Nano 01 by Dahmoun
Mar 11, 2018 20:33
#15 Nano_TG2_Sign_off_V1 by Manuel Dad
Mar 12, 2018 2:06
#16 Setra nano square design by Christopher Cardozo
Mar 12, 2018 10:39
#17 Setra Nano Design Options by Ratnesh
Mar 12, 2018 19:23
#18 Setra Nano_S_D_02_01 + 3D by Dahmoun
Mar 12, 2018 21:11
#19 Setra Nano_S_D_03_01 by Dahmoun
Mar 12, 2018 21:14

Discussion

Dahmoun

Designer

Thu, 22 Mar 2018 05:25:30 +0000
any answer ?
Mon, 19 Mar 2018 07:42:44 +0000
Could you please post the winning design?

Pablo Gosso

Designer

Thu, 15 Mar 2018 17:37:55 +0000
Any feedback?
Tue, 13 Mar 2018 07:02:32 +0000
This can be of any shape with in area of 77 mm W x 123 mm H , Say oval or a different shape other than rectangle?

Ricky3DVFX

Designer

Sun, 11 Mar 2018 04:23:27 +0000
Hi BOXborough

would you prefer any color of your taste, any specific colors to be implemented into the design

Boxborough

Buyer

Fri, 09 Mar 2018 13:35:52 +0000
Do not need the enclosure, just designs that sit on the wall surface
Fri, 09 Mar 2018 08:26:27 +0000
Hi,
Do you need enclosure for assembly as shown in ardachement ?

Manuel Dad

Designer

Thu, 08 Mar 2018 21:25:06 +0000
Hi, I can not download the file. Can you send me the link again? Thanks

Boxborough

Buyer

Thu, 08 Mar 2018 20:58:32 +0000
Source of LED illumination should not matter to industrial design. Why do you ask?
Thu, 08 Mar 2018 20:47:00 +0000
Are you using a multi-color LED or two separate source for the red and green lights?

Boxborough

Buyer

Thu, 08 Mar 2018 20:42:51 +0000
We are just looking for design options for a multi-dept team to evaluate
Thu, 08 Mar 2018 20:39:29 +0000
what is wrong with the current design?

Boxborough

Buyer

Thu, 08 Mar 2018 18:58:54 +0000
Correct. The PCB is small enough to fit into the box. So you are just designing what protrudes from the wall surface.

Mahan

Designer

Thu, 08 Mar 2018 18:31:40 +0000
Hi, assuming it's mounted on a hole in the wall so the thickness of the PCB is not a big issue, wright?

Similar Contests on Cad Crowd

UAV Reaper Drone
Need complete design for Reaper Drone in solid Works for each part of the stucture (Fuselage+ wings+ wheels) no need for engine and inside equipements, and i don't need rocket design and no need also for 2D drafting
Biological Cell Cluster
I am looking to obtain a 3D CAD model of a biological cell cluster in order to transfer it to a multiphysics simulation software (COMSOL). The cluster will consist of 120 'cells' in the shape of a hyper-dodecahedron (https://theory.org/geotopo/120-cell/ ). Each side of each dodecahedron must measure ~5um.
Universal Phone Mount
Hi Cad Crowd! We're in need of adjusting one of the components of our product. We have an existing 3D model that we need adjusted. We are keeping the same top and bottom connection the same. The basic design is similar to a standard universal phone mount for a car. We want to use the same mechanism as shown in the pictures and then adjust it to our requirements. The system will be 3 major components. Part 1: Back piece that has top connection and bottom connection which won't be changed much except for the width. This area will be where the gears/spring/everything sits on. Part 2: This will be the two "wing walls" that extrude left and right that will be sat on the back plate area. Part 3: Will enclose this area and have a bottom stub where the phones sit. We play on adding some little foam on the front of part 3 and on the insides of the wing walls. We think that the gear mechanism can be reduced in size and that we can flip it so that they sit above the wing walls (and in the center of the system).
Quick/Easy 3D Rendering / Photoshop project for high-end home audio company's new product!
I would like to work with someone who can take my product images (high resolution JPEG images) and add/modify them to reflect a new version of our product. The deliverables will be high resolution JPEGs (modified versions of the ones that I submit for this project). Our product, "LIO," is a home audio product (see: www.vinnierossi.com). Currently, the aluminum top panel (top cover) is has no holes. We are developing a new vacuum tube preamplifer stage in LIO and there will be two vacuum tubes that plug into two sockets directly below the two holes added on the top panel. I need new renderings that show these tubes: - Front views - Angled views The vacuum tubes need to be show in correct proportion and must look as realistic as possible, even glowing (so it looks like this is still a product photo). The ideal candidate for this product will be well versed in: - Photoshop - Solidworks - AutoCAD - Any other software that can get the job done. I will supply the product photos and examples of what the vacuum tubes look like, and where they are to be located on the top panel. Once the rendering is completed for the front and angle view, then they can be used for all the different variations of the same product (with different front/side panel, top panel, and knob color). Thank you, Vinnie
Mosquito Trap Redesign
We want to redesign our UV LED mosquito trap, an outdoor product to be placed in tent, outdoor café, farms to reduce the damage by mosquito. It should be simple, solid, low priced, slim, good quality and fashionable- a mid-way between high-tech and disposable traps. We would like its housing to be partially transparent for the visibility of LED light. Also, we prefer the entry point for mosquito to be a maze design. Type: Mosquito trap Target Audience: All age groups Competitors: enclosed in attachments Design: Maze entry point, partially transparent body, UV LED light, PCB board, cotton stand to put cotton soaked in mosquito attractant liquid, 2AAA battery case Material: Plastic Any software is acceptable if STL format file can be provided Any further questions, please feel free to comment.