Exercise Equipment Storage SolutionsBlind

Contest Ended, Winner(s) have been selected.
Description:
We have a number of products which are sold to commercial gyms. They desire storage solutions for these items that take up minimal footprint int he building but maximize storage.

I have attached a file with photos of existing storage solutions on the market and also the type of items we need to store in the gyms.

We want the units to be modular so they can expand for more equipment as needed.

We want the units to be multifunctional storing more than one type of equipment if possible.
Wants:
Color : Black or gray are the prevalent colors in the industry
Design style: We are open to modern looking with sweeping lines or rugged industrial.
Don't Wants:
We do not want just copies of designs already on the market. We want to maximize storage in a small area.
Software:
  1. SolidWorks
Additional Information
Please categorize the items based on use area in the gym.
Kettlebells - Up to 20 units
Dumbbells - Up to 18 units
Weight Plates - Up to 36 units
Barbells - 2 units

Entries

1st Winner
#10 GYM equipment storage rack by MILARS
Hi..
I have designed it with new concept, new ideas inline with your requirement.
I hope it is in line with your expectation.
Please rate and share your feedback for enhancing the design quality.
more
Nov 11, 2017 18:56
#1 Storage solutions - GYM concept by Milivoja
Hi, I made some concept to see where in which way to go. This concept is 2 m x 1.5 m and with some of gym equipment. Regards, Milos
more
Nov 2, 2017 2:00
#2 STORAGE solution concept1 by johrek
Nov 4, 2017 13:59
#12 Design of gym rack by Raymond
The design was designed to accommodate all the required equipment on one rack.
more
Nov 15, 2017 17:58
#14 Concept 1 by KP HARISANKAR
Hi Mike, Categorised different items and have designed storage solutions. Looking forward to your feedback.
Regards
KP
more
Nov 19, 2017 14:13
#15 Exercise Equipment single portable Storage Solutions by RRM
Nov 19, 2017 18:00
#9 storage-1_concept-1.stp,storage-2_concept-1.stp,storage-3_concept-1.stp by Karthikeyan Arumugam
Hi,
Please find the attached Exercise equipement storage concept-1 files.
Thanks and Best Regards
Karthikeyan Arumugam
more
Nov 10, 2017 9:24
#7 Store Unit.stp by Quoc Viet
Nov 9, 2017 16:56
#8 Exercise Equipment Storage by Akash Gupta
I am providing you the modified model of my previous model.Please see the attachment. Hope you like it.
Thanks
more
Nov 9, 2017 18:22
#11 Equipment Storage by Mahbub
Detachable and fold-able mount(any surface).
more
Nov 12, 2017 12:28
#17 Exercise Equipment Storage Solutions by RRM
Nov 19, 2017 18:07
#13 storage-1_concept-2.stp,storage-2_concept-2.stp,storage-3_concept-2.stp by Karthikeyan Arumugam
Hi Mike Power,
Please find the attached Exercise equipement storage concept-2 files.
Thanks and Best Regards
Karthikeyan Arumugam
more
Nov 17, 2017 9:10
#6 Exercise Equipment Storage by Akash Gupta
This is my idea/design hope you like it. Please see the attachment.
Thank you
more
Nov 9, 2017 6:16
#18 Equipment Storage Solution by Sudhin
Hey,
I have tried to inculcate a storage space for almost all the equipment you mentioned. Could very well act as the centerpiece with stuff accessible from all sides.
Attaching just the image files now. The designs have been created after consulting some seasoned "Gym-Users" and how they prefer their equipment to be arranged. So I do hope the design is efficient and user friendly. Over all size is 2 m wide and 2 m high
Hope to hear from you soon. Feel free to comment if any issues.
Thank You
Sudhin
more
Nov 20, 2017 9:03
#3 storage solution concept 1 (modified) by johrek
Nov 7, 2017 9:53
#4 Storage solutions - GYM concept v2 by Milivoja
I'm providing you modifed version of previous model. I hope you like it. Please, provide me comment.
Regards,
Milos
more
Nov 8, 2017 22:47
#16 Exercise Equipment Storage Solutions by RRM
Nov 19, 2017 18:04
#19 Storage Rack by Jacob Jose
Hey Mike,
This one is a highly customizable storage solution in which you can add on different racks according to your needs.You can also add additional modules on the sides.All you need is a 1" hexagonal wrench to assemble and reassemble the whole product.The footprint of the default design is 70"*35" which you can adjust according to your wish.In the default design, the racks are arranged in such a way that the weights decrease as the height increase thereby providing maximum stability.The long plates are provided with additional reinforcement for maximum rigidity.Hope you like the design.:)
Regards,
Jacob
more
Nov 20, 2017 21:20

Discussion

MILARS

Designer

Wed, 29 Nov 2017 18:29:37 +0000
Hope winner will be selected soon...

Milivoja

Designer

Thu, 09 Nov 2017 17:56:25 +0000
Hi Mike,
I will check my concept and comment it.

Mike Power

Buyer

Thu, 09 Nov 2017 15:59:54 +0000
We prefer IGS format for the final files

RRM

Designer

Thu, 09 Nov 2017 15:58:46 +0000
hi, Is that ok with catia model file?
i mean in .catpart OR .stp OR .STL format ???

Mike Power

Buyer

Wed, 08 Nov 2017 21:05:15 +0000
Hi Mike, you mentioned a modular design where the storage can be expanded. Could you please share the minimum and maximum size?
There is not a real minimum or maximum as it depends on the gym. I would say no shorter than 3 feet. Maximum would grow by adding units.
Wed, 08 Nov 2017 21:03:13 +0000
Hi Mike, you mentioned a modular design where the storage can be expanded. Could you please share the minimum and maximum size?

Mike Power

Buyer

Tue, 07 Nov 2017 15:32:03 +0000
Solidworks is not strictly required as long as we can get a compatible file.

MILARS

Designer

Tue, 07 Nov 2017 15:29:48 +0000
Hi Mike.. Is solidwork compulsory, or feasible with other software also.
Fri, 03 Nov 2017 11:45:17 +0000
Please mention the quantity as well for each part. so that storage will be according to your requirement

Mike Power

Buyer

Thu, 02 Nov 2017 15:26:27 +0000
Have you any desire of either wall mounting or stand ? A: We desire both type of solutions.
Thu, 02 Nov 2017 07:36:06 +0000
so u want to make a rack for this ???
Thu, 02 Nov 2017 04:54:42 +0000
Have you any desire of either wall mounting or stand ?

Similar Contests on Cad Crowd

Solidworks Car model
I am looking for someone to model in solidworks a replica of a car already on the market. I like super cars and classic cars! The file needs to be somewhat editable in solidworks and renderable in keyshot. The contest is quite open ended, the more detail the better.
Dwarven Forge Bracelet
A bracelet design to complement our long standing line of Dungeons and Dragons/fantasy rpg terrain. Please view our website -- dwarvenforge.com -- to develop a sense for our product. You can also look at our recent Kickstarter campaign -- http://www.kickstarter.com/projects/1745470388/1826778276?token=2a7841d2 (see "Game Tiles" on kickstarter.com). I'd start with a bangle, probably with one main charm, a small crystal and a small charm with our logo -- kind of like "Alex & Ani" level of complexity, but for gamers. The main charm should probably be metal. The bracelets are for women, gamers or partners of gamers.
Spa/health club annex
Convert a 2D, basic floor plan of spa/health facility into a 3D floor plan of spa/health facility. The project will require some creative adjustments to accentuate the look and feel of the facility to align with a spa-like environment. The addition of furniture items typical to spa/health settings will be required. This is a concept project and dimensions may change in the future as the project develops. The final objective/goal is a 3D model that can be used to confirm final dimensions, details, and other information with a larger stakeholder group as the project develops to a final stage of execution.
Motion sensor
This project is to design the housing for a motion detector for commercial office buildings. it should be approximately 2.5-3.0 inch circle and the body should be no more than 1.0 inch thick. the circle can be bigger if the edges sweep out to with a nice curve back to the ceiling surface. it will mount to a standard t-bar ceiling grid. (the kind of ceiling with the drop in tiles) it should mount in the corner of a light fixture with a portion of the "top" or up facing side exposed to the light fixture. and have a window on the top that looks up at the light... (for a light sensor) the window shall be rectangle and dimensions are: 33.0×10.8mm. the face which points to the room shall have a PIR lens (like this one http://www.jvs.de/Carclo_Fresnel/Drawings/PF68_12076_Drawing.pdf i'd like to receive drawings that are 3d printer ready. ease of mass production and tooling should be considered. drawings should also be open for editing by our team. Our team will add the holders, screws, clips, etc for the Electronics inside. the mounting method could be a small piece of spring steel or plastic. White plastic/PC examples: http://cdn3.volusion.com/jn7vt.cfos2/v/vspfiles/photos/HBL3-2.jpg?1416706843
Hinge for mailbox
We are designing a thick gauge aluminum mailbox (0.080” aluminum (2024 or similar) front and back; ¼” (6061 or similar) lid). We are having problems finding an off-the-shelf hinge for the lid that meets our evaluation criteria (below). Lid is a thick, flat piece of aluminum, no bends. Final product will be powder-coated.