peell

in 3D Modeling Design held by ale
Contest Closed
Description:
A sleek wearable tracker with a modular design (core+shell)

The core unit (male):
- outer shell: a waterproof thin disk with rounded edges and superficial connection for data transfer and charging (size and shape similar to welcome.moov.cc/)
- sensors (body interface only): same as www.empatica.com/e4-wristband but without accelerometer.
- connectivity: latest BLE, housing connectivity/charging
- key parameters: feels good on skin, it's thin and light, battery is long lasting and beautiful to look at

The shell/housing (female):
- shape: a watch like shape to house the above mentioned core unit
- sensors: same as www.atlaswearables.com/wristband2/ without the sensors listed in the core unit above
- OS: android wear 2.0
- key parameters: feels comfortable on wrist, looks great, it's light and the battery lasts long, bands are interchangeable

The charging station:
- can work with both the core unit and the shell
- key parameters: easy to carry around, it's light and small, it's safe
Wants:
read key parameters above
Don't Wants:
chunky, looks same as current wearables
Software:
  1. Onshape

Entries

#16 Sample by yaya
Oct 26, 2017 9:51
#15 Just for the portfolio! by DesignAssist
Oct 26, 2017 9:13
#14 Concept 2 by KP HARISANKAR
Oct 26, 2017 8:59
#13 Concept 1 by KP HARISANKAR
Oct 26, 2017 8:57
#12 Peell model 2 by RRM
Oct 25, 2017 16:36
#11 Peell by RRM
Oct 25, 2017 16:33
#10 Peell Activity Tracker Design by Anders - FatFox3D
Two important things I know from sport watches/activity trackers:
1) They must be "breathable", or at least not be one solid piece of rubber since heat will accumulate.
2) The screen is small, so the space must be used in the best possible way. In my opinion those slim rectangular watch faces are too small. Also round watch faces make very bad use of the space.
Anyway, keywords for my design are usefulness (it is an activity-tracker, not an accessory after all), simplicity (nothing too controversial – wide appeal, will fit many people and their outfits. I should note that it looks gorgeous in black as well, which is a bit more controversial and appealing to more people) and good materials which support both previous keywords; good materials look and feel good. Also, I could have gone and made a curved screen, made it unrealistically thin, but I know that there is nothing worse than having a pretty design that cannot be manufactured, or a fancy mechanism that does not work in real life.
Also, the model is as good as 3D-printable, should you choose to do that.
While the format currently is Blender, that can quickly be changed – I just wanted to know what you wanted first.
Feel free to ask questions :)
more
Oct 24, 2017 14:50
#8 Peell by Radu Chirila
This is my design. The strap is made out of silicon so it is elastic. The core is fixed inside the strap and it has enough support to stay in, but because of the elastic nature of the outer part, it can also be removed relatively easy for customization (changing the strap with a different one)
more
Oct 7, 2017 0:07
#7 peell by Saad Younas
3ds model
more
Sep 30, 2017 14:34
#6 peell* by Saad Younas
3ds max model
more
Sep 30, 2017 8:05
#5 Peel Bend by Mahbub
Concept Design...
more
Sep 29, 2017 20:06
#4 peell by REDA
Hello,
Here I am again with a new design that takes into account all your requirements.
i am looking for your feedback
Regards
REDA
more
Sep 29, 2017 13:37
#3 Tweaked design by DesignAssist
Sep 27, 2017 10:10
#2 idea1 by DesignAssist
Sep 26, 2017 16:38
#1 Peell by REDA
i am looking for your feedback
Thanks
more
Sep 24, 2017 22:54

Discussion

DesignAssist

Designer

Sun, 29 Oct 2017 17:06:26 +0000
There will not be a winner on this one.

RRM

Designer

Sun, 29 Oct 2017 16:28:29 +0000
Hi,
I'm new to this community. May I know usually how long it take to announce the winner??
Sun, 29 Oct 2017 11:03:51 +0000
@ Hari
I don't think so. I think in this case the buyer itself has backed out.

KP HARISANKAR

Designer

Sun, 29 Oct 2017 09:32:31 +0000
If I am correct, in a payment pending contest, the buyer won't be able to view the entries. One has to prepay so as to view and rate the entries.

DesignAssist

Designer

Fri, 27 Oct 2017 08:53:31 +0000
Deleted by the buyer? Maybe he got what he wanted for free or he was not impressed with the entries!

KP HARISANKAR

Designer

Thu, 26 Oct 2017 21:37:56 +0000
This contest is not displayed in the list of finished contests!

DesignAssist

Designer

Sun, 15 Oct 2017 18:30:01 +0000
Look s like another contest that will come to nothing! At least it keeps the juices flowing and earns us a few more points on the way.
Tue, 10 Oct 2017 19:52:35 +0000
Is this contest still open?
Sun, 24 Sep 2017 15:27:04 +0000
HI Ale

I think , the contest will attract more designers if it gets prepaid.

ale

Buyer

Sat, 23 Sep 2017 19:32:25 +0000
Hi Ratnesh kumar,

The contest is still active, looking forward to your designs!

Ale
Sat, 23 Sep 2017 17:31:15 +0000
Hi... Ale

I have designed for this contest but have not submitted yet because I am worried that contest is open or closed because no body has submitted any entries yet...please confirm then I will submit my design and I hope you will like most..

Saad Younas

Designer

Thu, 14 Sep 2017 08:15:09 +0000
do you want to 3d printable design.

ale

Buyer

Thu, 14 Sep 2017 06:04:22 +0000
@ Saad,

yes both Catia and 3ds max are fine!

Saad Younas

Designer

Wed, 13 Sep 2017 13:20:01 +0000
Is Catia and 3ds max Okay?

ale

Buyer

Thu, 31 Aug 2017 15:34:20 +0000
@Pablo, how do you plan on integrating the sensors in the "core" unit while keeping it thin and light?
Thu, 31 Aug 2017 15:18:44 +0000
Hi Ale, If you are willing to prepaid the project I will definitely work on it. Looking forward to your feedback. Pablo

ale

Buyer

Sat, 26 Aug 2017 21:46:39 +0000
hi there,

Solidworks is fine as well

the design is for the whole wearable device + accessories
Fri, 25 Aug 2017 22:39:05 +0000
Is Solidworks okay with you ? What format do you want the file in ?
Fri, 25 Aug 2017 21:54:47 +0000
Hi, do you want to design new look for wristband only?

Similar Contests on Cad Crowd

ATG's Automotive Concepts 2016
Amani Technology Group, LLC (ATG) is an automobile company that designs and produces luxury electric vehicles. ATG will be having a design contest that will be related to the conceptual phase of two luxury electric vehicles that will be futuristic and will use 100% electrical power. The company will need sketches to be displayed in computer aided design (CAD) and graphics software. The sketches or perspective views will show the vehicle's exterior (car's body). The two concepts will be a luxury 4-door sedan and luxury 2-door coupe and will compete in the markets with automobiles like the Mercedes Benz S550 and the Mercedes Benz SL Class 2-door coupe. The designers in the contest will be using existing photos and renderings of the luxury 2-door coupe to develop the new perspective views of the vehicles.
ATG's Automotive Concepts 2016 - 2
Amani Technology Group, LLC (ATG) is an automobile company that designs and produces luxury electric vehicles. ATG will be having a second design contest that will be related to the conceptual phase of two luxury electric vehicles that will be futuristic and will use 100% electrical power. This contest is a follow-up to the posting displayed on April 5, 2016. The company will need sketches to be displayed in computer aided design (CAD) and graphics software. The sketches or perspective views will show the vehicle's exterior (car's body) and interior (seating and dashboard). The designers from the first contest will be offered a second chance to develop their ideas. The two concepts in the design contest will be the: 1.) Amani Universe: This will be a luxury 4-door sedan with classic futuristic features. 2.) Amani Express: This will be a luxury coupe that will be the 2-door version of the Amani Universe. The renderings submitted will be used to help with presenting the concepts to potential customers in the luxury automobile market. The interior of the concepts should be included in the sketches and renderings. We will need to view the features that will make the vehicles a classic luxury brand. We will request that the designers include all dimensions of the exterior of the vehicles. These dimensions should be indicated on the orthogonal views (front, top, left side, and rear views). The perspective views submitted with the entries should show the classic features of the vehicles and aerodynamics.
design a bumpy dildo
we need a disdo that is aroung 8 inches in length, and 1.5 inch diameter. the dildo should be slightly curved, and have lots of bumps/veins/ridges. should also be circumcized
All Suites Hotel
Create a 3D model in Sketchup for a project under construction. Project consists of an all suites hotel (Basement+Ground Floor, Mezzanine, 6 Floors). Include furniture as per submitted layout
Rose Flower 3D Modeling to be used to create our prototype
We would like to find the right designer who can do the best design and rendering for this first project. There will be other projects after this. We would like to use this same person for future projects. I will post a 2nd prize as well. 2nd price will not be a lot of money, but I may have projects for the 2nd price person as well if I like his or her work. 1) We would like to create a 3D design based on our 2D drawing. What we would like to create is a rose flower pendant. I also have photos of a physical rose flower ring for you to refer to as far as style. We like this ring because the rose flower on it is like a real flower, the different layers of pedals, and pedals are wavy, growing from the center and flip outwards, like the real rose flower in nature. Obviously the bottom portion of the ring was designed to fit on the figure, but for our rose flower pendant, the bottom layer which are the leafs/branches do not need to be designed to fit on the figure. 2) As you can see, the 2D drawing has the same number of pedals in similar positions (except the very center pedal) as on the physical ring sample. What we want is to make our pedals to adopt the same waves and curves as on the physical ring sample. A designer can almost copy the current pedal waves and curves on the physical sample and just change the perimeter shape of their pedals to match the pedal shape on the 2D drawing. 3) Please arrange the leafs and branches according to our 2D drawing. Refer to the physical sample for details. On the physical samples, there are extra silver balls on the leafs that are not currently on our 2D drawing. We would like to add the silver balls on the leafs on the 3D design, just like how it shows on the physical sample. The purpose of it is to make the leafs shine and reflect the lights more. 4) Just like the physical sample, we would like the flower center – the area on the pedals that does not have stone coverage (towards the center) to be covered by enamel. Enamel areas should be nicely and evenly distributed in the flower center area - please refer to the physical sample. 5) Enamel area on the pedals (from top view) should show about 1-1.5mm in width behind the pedal in front of it. Perhaps we can make the enamel area on our piece to be similar like that, but I understand in some areas it cannot be the 1-1.5mm width. 6) We would like our pendant to have the same degree of the flower bud open/tightness as on the physical ring sample. The very bottom three pedals open up more, but the 2nd layer pedals (three of them) do not open up as much. The top layer pedal (only one pedal) and the wire-looking circle are still in the bud-like position. The way the physical ring has it is perfect. Please make it just like the ring in terms of degree of pedal openness. 7) The 4 branches will be enamel. The two lines of silver balls on the branches will not be enamel, but the area in between the two lines of silver balls will be enamel. 8) So far we are not planning to put enamel on the 5 leafs. Enamel will only be on the four branches in between the two lines of silver balls. Enamel will also be on the pedal walls towards the center of the flower. 9) Measurement: 35mm between the outside points of the two hocks. Size of the leafs and branches should go proportionally baed on the 35mm distance between the two hocks. Thickness of the pendant (from the highest point of the rose flower to the lowest point of the leafs/branches should be about 7.5-8.5mm. Please note that the highest pedals are the 2nd layers pedals (the 3 pedals). The very inner pedal and that little wire-looking circle thing actually sink in a little. 10) Leafs and branches and pedals have touch points. Please make sure they touch when they are supposed to touch according to the 2D drawing. They touch for the purpose of stability and reinforcement. 11) You can design the stones to be either glued or set on the pedals. But please make sure that the pedals do not become too thick, particularly the edge of the pedals. 12) The stones on the physical sample seem to be not as fine. Perhaps we can make the stones on our piece finer. The goal is to achieve a smooth coverage on the pedals and make the pedals shine. 13) Stones do not have to be the same size. Can be different sizes in order to have full cover on the pedals. The enamel areas on the pedal walls towards the center will not be covered by stones obviously. 14) Entire piece will be made of 925 silver. 15) Preferred software: Rhino preferred. Other 3D design and rendering software is ok too if you don't use Rhino. 16) Please ask questions if I am not being clear on anything. I understand that it is better to get a clear understanding first before designing so that we avoid going back and forth. 17) For our company logo, if you can fit it on the back of of the pendant, that would be great. If not, don't worry about it. 18) File size: don't know. No requirement. Please do note that we will need to use your file to create the prototype. So, the design needs to be as detailed as possible.