Design modern curtain pole brackets and finials
in
3D Modeling Design
held by
alithepole
Last seen:
2017-07-20 22:28:39
Contest Closed
Description:
We are looking for someone who can produce new technical drawings of curtain pole brackets for metal poles 19mm 25mm and 35mm diameters. You will need to research the market to establish basic principle and then create end, centre and recess brackets, and brackets for "passing rings".We also require modern finials designs that will be made from metal, glass and resin. The designs need to be sleek, interesting and modern.
For companies that produce the type of bracket and finials we are looking to create are JAB international, Walcot House, The Bradley Collection.
We shall be using hollow poles.
Wants:
Neat and interesting modern design with technical details ready to be supplied to a cnc routing company. We shall also need to see your fitting techniques and locking mechanisms )we dont want finials falling off the end of a pole). We shall choose designs that are not only technically good but also bring something new to the market. I would prefer the designs to have colour renders even if it were brushed steel.
Don't Wants:
I require: end, centre, recess, double brackets, passig brackets and ceiling brackets. I would like at least one set of brackets that are part of the same range.
I would like at least 10 finial designs which can be varied in their use of materials but all must be modern in design and suitable for metal 19mm, 25mm and 35mm poles. We shall be able to manufacture in all materials so designing finials in glass and metal would be fine.
Ask for Sample:
I would like to see one end bracket and one finial before progressing further.
Software:
- Not important
Entries
#12 Design modern curtain pole brackets and finials diameter 35mm
by edward m barnes
Jun 29, 2017 17:30
#11 Design modern curtain pole brackets and finials diameter 25mm.
by edward m barnes
Jun 29, 2017 17:28
#10 Design modern curtain pole brackets and finials diameter 19mm
by edward m barnes
Jun 29, 2017 17:26
Discussion
this is not fair
Hi everyone,
The contest was closed, since the buyer didn't provided any feedback so far, neither. We didn't want any more people wasting their time on this project.
All the "Pending payment" contests, where the buyers will not provide feedback, will be closed after 1 or 2 weeks, to avoid spending time on the projects and to work in vain. I apologize for the inconvenience.
If the buyers will request to re-open the contest, we'd be happy to do that. But just if they will give feedback or prepay the projects.
P.S. Please read these notes about the "Pending payment" projects: http://cadcrowd.freshdesk.com/support/solutions/articles/173610-important-notes-for-payment-pending-contests.
If you have any suggestions, please let us know your opinions in the "Suggestions" topic, in the forum.
Thanks,
Lucian
The contest was closed, since the buyer didn't provided any feedback so far, neither. We didn't want any more people wasting their time on this project.
All the "Pending payment" contests, where the buyers will not provide feedback, will be closed after 1 or 2 weeks, to avoid spending time on the projects and to work in vain. I apologize for the inconvenience.
If the buyers will request to re-open the contest, we'd be happy to do that. But just if they will give feedback or prepay the projects.
P.S. Please read these notes about the "Pending payment" projects: http://cadcrowd.freshdesk.com/support/solutions/articles/173610-important-notes-for-payment-pending-contests.
If you have any suggestions, please let us know your opinions in the "Suggestions" topic, in the forum.
Thanks,
Lucian
All my Respects for your works
Ended? Without a winner? And still says "6 days remaining"... What happened here?
Is this contest still on? I mean, no comments, no feedback, no ratings, no nothing...
Prepaid?
sherifelsheikh,
it is a payment pending contest, which means your design cannot be seen by the buyer unless they pre pay.
but don't expect any miracles.
it is a payment pending contest, which means your design cannot be seen by the buyer unless they pre pay.
but don't expect any miracles.
Similar Contests on Cad Crowd
Electronic Cigarette Lightsaber MOD Variable Voltage via DNA 30 OLED
This contest is for a design of an ecig mod. The mod will be designed around the 18650 battery, 510 connection, tritium keychain(without the keychain ring), the DNA 30d variable voltage board, and usb charger board from evolve. The design will be cut in titanium or stainless by a 4 axis cnc and/or digital lathe. Design should be simple, but very scifi in look. Should look like a sleek lightsabre as much as possible. Design should feature a magnetic switch that uses opposing magnetic poles to keep the switch out unlike most mod switch that have spring type switches. All the parts should be threaded or use c clips, etc for easy dissemble and reassemble.
DNA and UBD board Info can be found here
http://www.evolvapor.com/shop.php
Data sheet
http://www.evolvapor.com/datasheet/dna30.pdf
tritium keychain
http://www.aliexpress.com/item/Free-DHL-UPShipping-For-New-Year-Gift-10Pcs-Lot-Kit-Marker-Tritium-Glowring-Keychain-10-Year/375465992.html
The screen of the dna 30 board must be visible on the outside. but inset for protection.
Mechanical Specifications of DNA 30D Screen
1) Dot Matrix 96(W)×16 (H)
2) Dot Size: 0.16(W)×0.18 (H) mm2
3) Dot Pitch: 0.18(W)×0.20 (H) mm2
4) Aperture Rate: 80 %
5) Active Area: 17.26(W)×3.18 (H) mm2
6) Panel Size: 26.3(W)×8(H) mm2
7) Diagonal A/A Size: 0.69 inch
The DNA board its self should be supported by some sort of plastic insert for the metal body but must leave room for wiring to 510 connection and battery tube sections. If winning designs are manufacture-able then they will also receive the item they designed one we build them.
Premium In-ear Wired Earbuds design
We want a premium vintage design for our new product line. It represents, vintage, traditional, formal style, high-tech, metal finish for day to day rugged use.
Type: Wired Premium Earbuds
Target Audience: 20- 50 year olds
Competitors: Enclosed in attachments
Design: In-ear wired earbuds
Material: Metal (Partially plastic is also welcome)
Specification Details:
Driver Unit: 10mm x 10mm
3.5mm plug
Volume button/s and one multi-function button (But not limited to your design, please feel free to be creative)
Any software is acceptable, if STL format file can be provided.
Any further questions, please feel free to comment.
Retractable holder C2
I am looking first for a design concept that will improve the look of this product.
Modernize the look of this rectangular spring loaded retractable string that holds a pencil-holding adapter. Right now the body is a a plain looking 1.25" x 1.25" x .375" with a flexible rubber adapter on the end of a string.
I would like something that looks industrial, heavy duty and sleek, and a look that flows into the flexible adapter. Think about how an Apple design person would want this to appear.
This version will be used by working contractors and tradesman. This has a belt slide clip on the back, that should stay about the same although I will entertain an optional carabineer hook.
Acela PCB Layout
I am in need of a PCB layout. I have the following complete:
* Full schematic in Atium Designer V17
* All electrical components have been selected.
* PCB size and all component placement is complete
* Full Altium project file available to send to you.
I need the PCB routing completed as soon as possible.
Build me a Funky, Cool design for our new sensors
We are coming up with new sensors that we would be installing in gym equipment. We want it to look innovative – that with just one look of our sensors, our brand will be recognized.
Besides having an innovative design, we need a wifi logo – or any design showing that the sensor works via wifi/online, and our logo, GYMetrix, should be part of the sensors’ design.
We have also attached the holes needed for the sensor to work (colored blue and green on the attached design of our current sensors). The holes have to be in place and can’t be moved. They should be carefully integrated in the design – which is the big part of the challenge.
Think out of the box!
*Always refer to the files attached for reference.
We have added more information regarding the design we need:
Color: If possible, the bottom part of the sensor is a different color from the top. So that we can differentiate from the top and bottom part. We have attached an ideal bottom part background we have in mind.
Surface:
- Bottom surface have to be flat where the blue holes indicated should be.
- Top Surface can be anything. Use your imagination! (Like the beacon image attached).
- We need one side to be flat. We need this to put stickers for inventory purposes.
- One side needs to have the green hole.
- The rest, you can use your creativity!
Size: Current size of our sensors is 7.3cm x 3.4cm x 2.8cm. Don’t be limited with the current dimensions, you can make it slightly bigger to accommodate your new design. However, make sure the placement of the holes needed should still be in place.
Holes: The blue holes indicated in the diagram, is part of the bottom part. Please see attached image “sensor design-holes needed” and other files for reference. The purpose of the 2 holes is where we can (1) turn the sensor on or off and (2) where the light indicator will be.
Total number of holes: 3
File types needed:
- STEP (.stp)
- SolidWorks (.sldprt)
- ProE (.prt)
- Parasolid (.x_t and .x_b)
- ACIS (.sat)
- AutoCAD (.dwg, 3D Only)
- Autodesk Inventor (.ipt)
FALKOR
Designer