Electronic Cigarette Lightsaber MOD Variable Voltage via DNA 30 OLED

Contest Closed
Description:
This contest is for a design of an ecig mod. The mod will be designed around the 18650 battery, 510 connection, tritium keychain(without the keychain ring), the DNA 30d variable voltage board, and usb charger board from evolve. The design will be cut in titanium or stainless by a 4 axis cnc and/or digital lathe. Design should be simple, but very scifi in look. Should look like a sleek lightsabre as much as possible. Design should feature a magnetic switch that uses opposing magnetic poles to keep the switch out unlike most mod switch that have spring type switches. All the parts should be threaded or use c clips, etc for easy dissemble and reassemble.

DNA and UBD board Info can be found here
www.evolvapor.com/shop.php

Data sheet
www.evolvapor.com/datasheet/dna30.pdf

tritium keychain
www.aliexpress.com/item/Free-DHL-UPShipping-For-New-Year-Gift-10Pcs-Lot-Kit-Marker-Tritium-Glowring-Keychain-10-Year/375465992.html

The screen of the dna 30 board must be visible on the outside. but inset for protection.

Mechanical Specifications of DNA 30D Screen
1) Dot Matrix 96(W)×16 (H)
2) Dot Size: 0.16(W)×0.18 (H) mm2
3) Dot Pitch: 0.18(W)×0.20 (H) mm2
4) Aperture Rate: 80 %
5) Active Area: 17.26(W)×3.18 (H) mm2
6) Panel Size: 26.3(W)×8(H) mm2
7) Diagonal A/A Size: 0.69 inch

The DNA board its self should be supported by some sort of plastic insert for the metal body but must leave room for wiring to 510 connection and battery tube sections. If winning designs are manufacture-able then they will also receive the item they designed one we build them.
Wants:
Evaluation includes futuristic aesthetics, design details, simplicity, build-ability, parts description, close ups, cut shots, materials selection, creativity, use of solid works as well as jpeg renderings
Don't Wants:
Parts that look nice but wont run on a 4 axis or lathe cnc machine are not ok. Dont want design formats and or features not compatible with 4 axis and lathe CNC manufacturing. (3d extrusion printing of plastic parts ok)
Software:
  1. Solid works, Inventor,Pro-E

Entries

No Entries Submitted Yet.

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

Retractable holder C2
I am looking first for a design concept that will improve the look of this product. Modernize the look of this rectangular spring loaded retractable string that holds a pencil-holding adapter. Right now the body is a a plain looking 1.25" x 1.25" x .375" with a flexible rubber adapter on the end of a string. I would like something that looks industrial, heavy duty and sleek, and a look that flows into the flexible adapter. Think about how an Apple design person would want this to appear. This version will be used by working contractors and tradesman. This has a belt slide clip on the back, that should stay about the same although I will entertain an optional carabineer hook.
Where there's muck there's brass
An alternative to picking up dog dropping with plastic bags. A cheap, easy to build, bio-degradeable design. It should, with a minimum of moving parts, (ideally 1-2 piece cardboard structure), pick up and enclose droppings. Should also include built in handle (reasonably distanced from holding section) Simplicity is key. As will need to be able to produce cheaply in large volumes. MUST BE MASS PRODUCEABLE for cost in the region of $1-2.
Unicycle
Hi all, thanks for checking out my contest! I am involved with a company that is looking to receive some entries for a "prototype" electric unicycle. If you aren't familiar let me give you a brief background. Remember the hoverboards last xmas?? The electric unicycle works on essentially the same principle (upside down pendulum theory) to achieve self balancing capability. The current offerings on the market just don't cut it, the plastics are basically thrown together around the requirements of a build, rather than incorporating the necessary components into the design for a smooth finish. I would like the final product to be somewhat futuristic/prototypish looking, maybe a bit sporty. You can get a feeling for whats out there by doing a google search for "electric unicycle". Integral to the design there are 3 requirements. 1.) Obviously the plastic fairing will need to have a cavity for the wheel, but in addition, it will need to subtly include a space for lipo batteries, (doesnt have to be in any particular shape however), and also must include spot for a pcb control board. Both of these items arent excessively large, the PCB is about 4X3 inches and the batteries are about 5X5X1 (but can be reconfigured). 2.) I would also like to incorporate into my design a headlight, and a tail light if possible, but most concerned with head light. Would also like to leave the option open to include small bluetooth speakers, however these would not take very much space at all. 3.) Finally, this design will need to have a retractable handle for balance when getting on/off.
Keyshot Product Rendering
Render photo-realistic multiple view of products for use in visualization, web/print etc. 8 product models, 3D STP files already available Requiring only application of surface finish and lighting options.
Brush Cleaner
I would like a electric brush cleaner which has a base that fits into the palm of your hand and multiple detachable head pieces. Must be either rechargeable or battery operated. Base: - approx. 3 inches in width - has mechanics to rotate head piece both ways - possible liquid containing compartment that can dispense foam cleanser through head piece - strap that secures base to palm of hand Head: - approx. 3inches in width - Flat top with a short lip to retain liquid - Should have various sized bumps to help with cleansing brush head - can attach securely to base Similar construction to a clarisonic skin cleaner, but without the handle. Please see attached images