RENEWED KNOB

Contest Ended, Winner(s) have been selected.
Description:
I would like to propose to my boss a new knob for the machines of our company. The company produces catering equipment as griddle, fryers, stoves for restaurant, hospital and so on, made by stainless steel. Actual knob is fine but old, we need an 21st century look. However, we have to maintain the same features of easy cleaning and also has to be easy to use.
Wants:
The material used is plastic and the maximum dimensions are 7cm diameter included the ring with the label all around the knob itself that indicate the different positions and so the different power of the machine ( as the volume knob on a stereo). In attached photos and the logo of the company in order to understand. .In addiction, I've put a picture of our competitor, by the way WE WANT TO MAINTAIN IN SOME WAY THE LOGO with the colors ALSO STYLIZED IN THE KNOB..
Don't Wants:
too much complicated design, it will be very difficoult to produce the knob moreover it will be very complicated to clean the knob against grease and dirty..
Software:
  1. any
Additional Information
KNOB AND THE RING WITH THE LABELS SHOULD BE TWO DIFFERENT PARTS
AS PICTURE COMPETITOR

Entries

1st Winner
#38 Knob updated by sldraftingdesign
Knob updated with the points going out to edge of knob.
more
Dec 13, 2016 15:48
#11 Alternate Knob by sldraftingdesign
Here is an alternative knob
more
Nov 16, 2016 20:11
#15 Revised Knob by sldraftingdesign
I have rounded the top more to give it a smoother look
more
Nov 17, 2016 13:23
#1 Sleek & Modern Knob Sneakpeak by sldraftingdesign
I have attached a JPEG image of my design of a closeup as a sneakpeak. Once prepaid, i will release the CAD file and entire picture
more
Nov 14, 2016 16:15
#2 Appliance Knob by sldraftingdesign
Easy to produce shape while staying sleek and modern. Contrasting finishes. Logo included.
more
Nov 14, 2016 17:26
#3 Knob 01 by Loc Bui
This design with logo flat the knob, it is easy for fabricating.
more
Nov 15, 2016 3:08
#4 Knob Model Image by Zest !3laster
Just submitted my knob model
more
Nov 15, 2016 8:05
#5 Knob by ProjectsEngg
Number / marking part stationary & Knob rotating
more
Nov 15, 2016 13:07
#6 Updated Knob by sldraftingdesign
I updated the design per your request of not liking the little boss squared off below the logo. I rounded it. I also felt the knob was too shot making it harder to grab. I increased its height by 5 mm. If design is picked.
more
Nov 15, 2016 13:22
#7 Knob by SMITA N
simple as per your requirement and easy to manufacture ,if we design in square shape, it also look good,if u want I can design
more
Nov 15, 2016 13:31
#8 Black & Red Version by sldraftingdesign
Same knob, but injection molded in black and red instead of chrome plated.
more
Nov 15, 2016 13:36
#9 Latest Update Knob by sldraftingdesign
Logo has been rotated as to act as an arrow. The boss the logo is on has been heightened as well. Kept all black design.
more
Nov 16, 2016 15:56
#10 New & Improved by sldraftingdesign
As per requests
more
Nov 16, 2016 16:45
#12 RENEWED KNOB by Loc Bui
Here is another design.
more
Nov 17, 2016 1:05
#13 RENEWED KNOB by Loc Bui
One more knob
more
Nov 17, 2016 1:07
#14 Knob Front Squared Model Image by Zest !3laster
This is how you want ?
more
Nov 17, 2016 6:15
#16 Knob by RE_Ron
Knob rotates over a fixed bottom plate that has oven markings [Off, on, etc]. Company logo is lower than the surface of the top face and painted red inside.
more
Nov 20, 2016 1:12
#17 RENEWED KNOB by Loc Bui
Another design.
more
Nov 21, 2016 2:34
#18 RENEWED KNOB by Loc Bui
One more knob.
more
Nov 21, 2016 2:38
#20 DESIGN IS MADE UNDER YOURS TERMS by MUNISWARAN
Nov 26, 2016 10:46
#21 Knob by kriomant
Nov 27, 2016 9:15
#22 Round Knob by Joel K.
Knob with logo on front. Totally round for ease of cleaning and maintaining. Logo is raised with beveled edges for ease of cleaning. Part can be provided in a different format if needed.
more
Nov 28, 2016 19:08
#23 renewed knob v1 by mick bruce
v1 with thanks.
more
Nov 28, 2016 19:17
#24 Knob - V1 by Norman Medi
3D model of the knob using Solidworks 2016
more
Dec 1, 2016 22:23
#25 Renewed Knob by sherifelsheikh
Easy to clean
Easy to handle
New Shape
more
Dec 2, 2016 21:56
#26 Knob Renewed by sherifelsheikh
New look
more
Dec 2, 2016 22:20
#27 1st_knob_renew_supra by supra77
This my first model.
Combination of a glossy finish and texture
more
Dec 3, 2016 6:31
#28 Knob by kriomant
Dec 3, 2016 17:11
#29 Turn up the heat! by Decker
Knob designed to be machined out of a single piece of Aluminum. Anodized to add red and black coloring.
Quick and neat.
View the 3D version at: http://a360.co/2g4bheA
more
Dec 6, 2016 3:15
#30 knob by elmasry
knob and ring are separated . please rate and feel free to ask for modification
more
Dec 6, 2016 11:45
#31 3 renewed knobs - Norman by Norman Medi
These are there other models of The renewed knobs. The new entries all have a lower thickness.
more
Dec 6, 2016 12:21
#32 Renewed knob by Norman Medi
This is the new revision of the previous work installed on a Gas Oven
more
Dec 8, 2016 11:03
#33 RENEWED KNOB by Jinen Sheth
Dec 8, 2016 11:49
#34 Knob Design by Pradeep Somasundaram
Dec 10, 2016 6:06
#35 Renewed Knob - New Concept by Pradeep Somasundaram
Dec 10, 2016 6:10
#36 Kitchen Appliance Multi Use Knob by Gethin Evans
Silver finish with logo indent.
more
Dec 12, 2016 23:53
#37 RENEWED KNOB by Bodhayan
RENEWED KNOB WITH OVERALL DIAMETER 7 CM (MAX)
more
Dec 13, 2016 13:35
#39 wip by ODBDesign
Dec 13, 2016 19:25
#40 knob by shantanu
2mm shell thickness. can be customised. good view of indicator.
more
Dec 14, 2016 9:52
#41 RENEWED KNOB by Bodhayan
RENEWED KNOB WITH MAXIMUM DIAMETER IS 7 CM
more
Dec 14, 2016 9:57
#42 knob by A-Designs
Dec 14, 2016 19:38

Discussion

Thu, 15 Dec 2016 12:13:55 +0000
THANK YOU TO ALL!
GOOD JOB GUYS

sldraftingdesign

Designer

Tue, 13 Dec 2016 15:04:01 +0000
and it paid, yay!

sldraftingdesign

Designer

Thu, 08 Dec 2016 13:00:46 +0000
Adam, We have been saying this for weeks, yet the buyer refuses to prepay it.
Tue, 06 Dec 2016 22:12:14 +0000
Prepay the contest.

sldraftingdesign

Designer

Fri, 02 Dec 2016 16:55:02 +0000
guys i really dont think the contest holder intends on picking a winner or funding the contest. I had very good communication with him with feedback and all, and as of past week or two, no responses.

sldraftingdesign

Designer

Tue, 22 Nov 2016 17:02:43 +0000
and prepay contest

sldraftingdesign

Designer

Tue, 22 Nov 2016 17:02:33 +0000
Buyer, can you please rate designs
Tue, 15 Nov 2016 06:36:21 +0000
not only technical design, something that include the logo and at the same time have a actual look...thanks
Tue, 15 Nov 2016 05:13:53 +0000
I want to submitted a knob design. I want to known, that do you need any modern technical design or only the plastic design for knob.
Mon, 14 Nov 2016 16:52:53 +0000
I FORGOT, KNOB AND THE RING WITH THE LABELS SHOULD BE TWO DIFFERENT PARTS
AS PICTURE COMPETITOR

sldraftingdesign

Designer

Mon, 14 Nov 2016 15:53:33 +0000
Im ready to submit once prepaid. I have a design ready
Mon, 14 Nov 2016 14:59:57 +0000
No i haven't started yet, if you want lots of designs and ideas you have to prepay the prize.
Thanks
Mon, 14 Nov 2016 14:57:43 +0000
Have you already completed the design?
Mon, 14 Nov 2016 14:54:46 +0000
Please can you prepay the prize?

sldraftingdesign

Designer

Mon, 14 Nov 2016 14:49:45 +0000
Thank you! your first submittal coming up
Mon, 14 Nov 2016 13:47:37 +0000
Yes of course!
just done

sldraftingdesign

Designer

Mon, 14 Nov 2016 13:32:41 +0000
Can you please submit PNG of logo so that it will ease in use of creating the design

Similar Contests on Cad Crowd

Interesting Restaurant concept
Looking for an experienced interior designer to create the concept of my new start-up restaurant on a 70 Square Meter size. The branding details are so much fun and it will need out of the box creativity to get the brand spirit in the shop design elements. Kindly send me any samples of previous concept work and I will contact the most similar like-minded designer. Regards,
J-shape
3D modeling of a J-shaped massage tool, much like a Theracane only smaller in dimensions. The tool should be modeled as close as possible to the attached images. The straight portion of the J-shape is approximately 10 inches long and 3/8in in diameter. The hook portion of the tool should form an approximately 180 degree arc and terminate in spherical end of 9/16in diameter. The handle, at the top of the J-shape, should be approximately 3/4in in diameter. The attached jpg images are of the actual tool that I would like modeled and should give you a good idea of it's dimensions. The png file should also provide a good reference. Thanks.
From 2D to 3D
Please make this old 2D drawing in to 3D drawing - with correct meassures. When it is done, I also need to have a drawing of the same tool - but where the top is blank. Meaning that there is no - thread - so we can cut the thread afterwards. It is attached as the M14 drawing.
5 Yr Anniversary Momento
Looking to create a custom momento for my wife for our 5th wedding anniversary. Would like to have this 3d printed and be able to fit on a shelf in our house (little statue or something). In terms of design guidelines, I'm open to many different ideas and don't want to restrict your creativity by narrowing down the scope too much. I was thinking of something that would incorporate our names or potentially the below dates in an artistic way. Some elements that could be incorporated: - May 2, 2009 - Marriage Date (Wife = Ana or Anastasia, my name is Adam) - Feb 12, 2010 - First son, Alex - Dec 21, 2011 - First daughter, Asha - Sep 17, 2013 - Second son, Archer - All of our names start with A. Some other things that my wife likes and/or has some sentimental value: - Hawaii (honeymoon location) - Flowers (specifically orchids, also likes peonies and ranunculus) - Disneyland - Animals (Bison, Koala Bears) - Travel If you need more, let me know...
drawings
I have the 3d model but I need plsns, sections , axonometric diagram ( part to whole, circulation, sun direction, mass, unit, etc.) parking level , ground floor with unit detail, 2 sections, 2 perspective drawings , ((renderings)) of the interior and exterior.