Ruggedized "Case" for 3D Scanner
in
Concept Design
held by
james.monsen
Last seen:
2016-09-12 04:58:50
Contest Ended, Winner(s) have been selected.
Description:
We are looking to produce a custom ruggedized "case" for a professional 3D scanning instrument. This instrument is often used on construction job sites, and the threat of damage due to drops or falls is quite high. We envision a 1/2" dense foam "cage" of sorts that will fit over the body of the scanner. Please see the attached 3D model, video and pictures for a more complete idea of our needs.
Wants:
Winning design must primarily provide protection for the instrument in the event of a fall. Additional considerations will be for ergonomics of handling the scanner (i.e. ridges on the side of the case to enhance grip), manufacturability, ventilation to the instrument, etc. Again, please see attached model, video and pictures.
Company Logo:
Yes
Software:
- SolidWorks
- Autodesk Inventor
Prepaid PrizeEntries
#4 Rugged Case
by ;lzsvpja-] bja]=
Fairly simple design. The scan data file size was so big it made the computer choppy and it was hard to reverse engineer it exactly, but it close. More renders on my portfolio.
Aug 26, 2016 1:18
#2 Lasser Case Concept
by NXTGear LLC (D. Boyd)
Rough concept of the case design. Dimensions are approximate as they were extracted from a PLY file. Need drawing or solid dimension for detailed design.
Ventilated case, thick grip handles for transportation and positioning on tripod. Easy removal with split case design.
Ventilated case, thick grip handles for transportation and positioning on tripod. Easy removal with split case design.
Aug 23, 2016 15:10
#5 Case
by Michael Dimou
This is a minimal case wich made from silicone and also has very ergonomic design for handling
Aug 28, 2016 19:47
#8 Ruggedized Case for 3D Scanner
by Michael Dimou
Case for 3d Scanner Rev2 . This is made from silicone
Aug 30, 2016 19:04
#9 Lasser Case Concept_V2
by NXTGear LLC (D. Boyd)
similar in concept to v1. Changes include wider ventilation holes for better circulation and weight reduction. The design prioritizes protection and handling of equipment
Aug 31, 2016 19:52
#10 Rugged Case 2.5
by ;lzsvpja-] bja]=
Added some hand/finger grips. Two different options here. I personally like the black one. It seems more natural to grab or rest a hand there. One more render on my portfolio showing improved top side.
Sep 1, 2016 5:48
#15 Case: composite hard rubber
by Aniket41
Hello,
Here is my first design for the contest. I suggest moulded rubber case fastened with screws for this purpose. I tried to make the model from .ply file but its not accurate. So please consider this as an illustration to convey the basic idea and design.
Thanks!
Here is my first design for the contest. I suggest moulded rubber case fastened with screws for this purpose. I tried to make the model from .ply file but its not accurate. So please consider this as an illustration to convey the basic idea and design.
Thanks!
Sep 1, 2016 22:22
#16 Preview of Ruggedized Case by Ivan Zerpa
by Ivan Zerpa
Thank you James for giving more time so I can improve my design.
This is a preview of my design.
Soon I'll upload complete files of my design.
This is a preview of my design.
Soon I'll upload complete files of my design.
Sep 2, 2016 2:26
#17 Ruggedized Case for 3D Scanner
by VertuDesign
This is the trimmed Down version of Concept 3.
Sep 4, 2016 18:49
#20 Protective Silicone Case for 3D Scanner
by benito
silicone jacket/case to protect corners and edges of the 3d scanner. (4) parts/items total,..(2) cases and (2) clips. I provided handles at the top and bottom of each case. thanks for extending the contest. most of the time was modeling the 3d scanner from reference images. the overall dims of the scanner is from the product specs.,...it's close.
Sep 4, 2016 20:38
#21 Ruggedized_case
by Ranjan317
Easy and cheap to manufacture, plenty of openings for ventilation and cooling, handles for lifting and transport, no sharp edges or corners.
Sep 4, 2016 21:17
#22 Ruggedized Case for 3D Scanner
by Ivan Zerpa
Reverse engineer the scanning equipment.
Real measures.
Belt to carry equipment.
In the grooves of the shell, you can place polystyrene or dense foam for added protection equipment
Real measures.
Belt to carry equipment.
In the grooves of the shell, you can place polystyrene or dense foam for added protection equipment
Sep 4, 2016 22:36
#23 scanner bumper concept
by RBLdesign
Hi . Logos and some fine details are missing because we are running out the time. :)))) less then an hour left. sorry for that.
Sep 4, 2016 22:39
Discussion
Showing last 20 comments - View All
Congrats! Fantastic design entry.
@cadgeek
@cadgeek
just started today,...any chances you can extend a day or two?
If this contest could be extended and the proper info (i.e. step) of the model would be given, there would be more entries
can you please extend the date for a day or two
thank you!
thank you!
Unfortunately, I won't be able to get the .igs or .step files in time before this contest ends. My primary computer won't be repaired in time.
If you can, please work with the .ply file. I understand if the dimensions aren't exactly perfect. We will make whatever slight modifications at a later date if necessary. Thanks again!
If you can, please work with the .ply file. I understand if the dimensions aren't exactly perfect. We will make whatever slight modifications at a later date if necessary. Thanks again!
The problem with a ply file is that even if you reverse engineer it, there will be issues with exact dimensions and ultimately lead to an improper fitting. So if you can provide a step/ iges file, the fitments can be checked properly. I request you to upload the neutral format files and increase the time frame for the contest for a good response.
My apologies on the delays getting the .step and .igs files for everybody. My computer that I was doing the modeling on died. Trying to get it back up and running ASAP.
if anyone can give me the files that will be nice.! ;)
Hello,
Where is the STEP file you talking about? where the action is?
thank you for giving me something to work if you want more participants !
Thanks
REDA
Where is the STEP file you talking about? where the action is?
thank you for giving me something to work if you want more participants !
Thanks
REDA
Please upload the STEP file, we can't get the dimensions
Can you please upload a step/iges file?
@ abhijeet.ksahu
Ideally, we would like to have the plastic cover remain in place. Thanks!
Ideally, we would like to have the plastic cover remain in place. Thanks!
@Ivan Zerpa
This scanner is marketed under a few names. Trimble TX5, FARO Focus 120, FARO X30, FARO X130 and FARO X330. Dimensions are identical for each different model. Thanks!
This scanner is marketed under a few names. Trimble TX5, FARO Focus 120, FARO X30, FARO X130 and FARO X330. Dimensions are identical for each different model. Thanks!
Will the cage sit above the plastic cover or you are gonna remove the plastic cover and use just the cage instead of that?
Hello James
What is the brand of scanner?
What is the brand of scanner?
i tried opening the attached ply file, but i ain't seeing anything, its kinda empty. pls send in another file format of the attached (.ply)
Yeah .stp file will cool, cus am finding problem opening the .ply file format
@stylexdesign
Dimensions should be based off of the .ply model that I have uploaded. I will be uploading a .stp file shortly. Thanks!
Dimensions should be based off of the .ply model that I have uploaded. I will be uploading a .stp file shortly. Thanks!
@Cad Geek
Yes. The clearance between the top of the instrument and the existing plastic protection is only 1/32". Thanks for the question!
Yes. The clearance between the top of the instrument and the existing plastic protection is only 1/32". Thanks for the question!
@Manuel Rosso
Thank you for commenting on this project. I am looking for a cover that will remain in place during the use of the instrument. I have uploaded a .ply mesh of the instrument. I will also be uploading a .stp file shortly.
Thank you for commenting on this project. I am looking for a cover that will remain in place during the use of the instrument. I have uploaded a .ply mesh of the instrument. I will also be uploading a .stp file shortly.
Similar Contests on Cad Crowd
Casing design competition for Variofin mixer faucet
Varion declares a casing for the new mixer series design competition.
AN OBJECT is to create a modern casing design, which combines with other parts of a mixer and answers technical requirements and limitations (requirements + handles).
More technical information: http://varion.ru/konkurs-variofin/en/
Panzer Cases - GoPro Protective Case
Concept design/model for the interior packaging of a case to safely store/transport a GoPro camera(s) and assorted mounts, batteries, media and other accessories.
See attachments for full details.
This is the first in a series of projects to provide bespoke interiors to fit innumerable types of delicate and technical equipment, such as cameras, lenses, scientific equipment. As we would like to have continuity across our range, to present a strong brand, a successful designer for this project would then be strongly considered for use with all further future projects.
injection mold, rubber mold& components
i need product design or sample to manufacture mold component supply nd we are in to more than 14 year year work experience tool technologies
Plate Sauce Cup
- Looking for concepts for a sauce cup that, by way of a solid, useable mechanism, can be attached to the outside edge of a plate, so that a wide variety of sauces can be placed in it
- this item will allow you to keep sauces, like ketchup, gravy or plum sauce, etc off the plate, so they don't mix ... AND you have more room for food on your plate.
- must be curved to follow the edge of a plate's edge
- material will most likely be plastic - must be dishwasher safe
- 3 sizes - dinner plate (10in diameter), salad plate (8in diameter), and cheese/tea/dessert plate (7in diamter)
- look to have a logical and functional means of clamping the cup to the plate - my thoughts are one or two hinges, so think of ease of construction, as well as being able to be easily opened (yet strong holding power). Alternate means of clamping will be considered.
- Feel free to provide a design for a sauce cup that has 2 or 3 distinct "compartments" to house different sauces (in each separate compartment) at the same time.
Stiletto Girl Shoe Design
Ok,so I have a design patent pending for a design of stiletto shoe, with a girl on the heel, which doubles as a pole. This will be a novelty product, sold in places like Spencer's gift stores, novelty stores etc. Additionally in places like Vegas etc.
We plan on having different size products, from key chains to maybe a 7-9 inch version. Plans are for the product to be made out of of plastic.
The goal for this project is to come up with a 3D model to enable us to create our first prototype, which will either be via 3D printing or traditional plastic.
manufacturing.
The drawings from the patent application are attached.
benito
Designer