One World Bracelet

in 3D Modeling Design held by jklic72
Contest Closed
  • Open
  • Choosing Finalist
  • Ended
Description:
We are designing a silicone bracelet that will consist of 14 equal-sized, interconnected sections. 7 of the bracelet sections will hold a small amount of water from each of the world’s 7 seas. The other 7 sections will contain small amounts of soil from the world’s 7 continents. The idea is that wearing a bracelet that contains samples of water and soil from around the world will make people feel more globally connected.

The 7 sections that contain soil should be a light shade of brown and the sections that contain water should be a light shade of blue. We are open to each designer’s initial suggestions for specific colors to use and will provide feedback after receiving the initial designs. However, we would like both the brown and blue sections of the bracelet to be opaque (i.e. - non-translucent).

Additionally, we would like to see two versions of the bracelet in all initial submissions…one that has the 7 sections of water on one side and the 7 sections of soil on the other side of the bracelet. And in the other version we would like to see alternating sections of soil, water, soil, water, etc.

We will eventually have different sizes of the bracelet but for the initial design we can use a “medium” inner-circumference size of 7.5” (19 cm).

We are looking to have a 3D CAD rendering for prototyping. We welcome feedback and submissions from designers who can suggest approaches for producing a bracelet like this that will need to have small amounts of water and soil injected into the bracelet sections at some point during or after the initial manufacturing process.
Wants:
We will evaluate submitted deigns based on overall esthetics, style, and colors and want the overall design to be sleek and modern (nothing tacky, please). We will also place added value towards designers that have thought through the unique production requirements of this project.
Don't Wants:
We are not looking for low quality renderings or tacky designs.
Ask for Sample:
N/A
Software:
  1. N/A

Entries

= Buyer's Rating
#51 1 World by zulfadzryl
Jun 24, 2015 17:25
#50 One World Bracelet Rev.1 by feri saputra
Download Files
Jun 24, 2015 2:04
#49 bracelet 2 by pavan davera
Jun 23, 2015 18:55
#48 bracelet perfectly assembled by pavan davera
Jun 23, 2015 18:51
#47 bracelet carved by pavan davera
Jun 23, 2015 18:43
#46 bracelet by pavan davera
Jun 23, 2015 15:26
#45 BRACELET by REDA
Jun 23, 2015 12:34
#42 one world bracelet by feri saputra
Jun 20, 2015 5:17
#41 Bracelet 2 by Irfan
Jun 18, 2015 9:31
#40 Version 2 Revision by Ridwan Sept
Jun 15, 2015 3:46
#38 One World Bracelet by DesignerRavi
Download Files
Jun 14, 2015 18:54
#37 world bracelet by DesignerRavi
Download Files
Jun 13, 2015 16:03
#36 One World Bracelet by DesignerRavi
Download Files
Jun 13, 2015 15:52
#35 world bracelet by DesignerRavi
Download Files
Jun 13, 2015 5:30
#34 One world bracelet by pavan davera
Jun 12, 2015 16:24
#33 Bracelet#3 by angel consultancy
Jun 12, 2015 4:57
#32 Second Version by Ridwan Sept
Jun 11, 2015 18:54
#31 "First Version" by Ridwan Sept
Jun 11, 2015 16:13
#30 Sea and Soil Bracelet without Iconic Profiles by Ridwan Sept
Jun 9, 2015 4:35
#28 Sea and Soil Bracelet by Ridwan Sept
Download Files
Jun 8, 2015 16:41
#27 Bracelet#2 by angel consultancy
Jun 8, 2015 12:16
#26 Bracelet#1a by angel consultancy
Jun 8, 2015 12:02
#24 Futuristic Young Brackelet by Ridwan Sept
Download Files
Jun 8, 2015 7:22
#23 One World Bracelet TR 2 by Trozema
Jun 8, 2015 0:34
#22 Young World Bracelet by Ridwan Sept
Download Files
Jun 7, 2015 18:46
#20 One World Bracelet by Trozema
Jun 7, 2015 6:00
#19 Modified Bracelet #4 by Dave_G
Jun 7, 2015 0:54
#17 arrow earth bracelet by abdillah yusuf
Jun 5, 2015 2:35
#16 earth ellips bracelet by abdillah yusuf
Jun 5, 2015 2:06
#15 One World Bracelet by Nicholas Elderfield
Download Files
Jun 4, 2015 7:25
#14 Connect V2 by REDA
Download Files
Jun 3, 2015 8:34
#13 Connect by REDA
Download Files
Jun 2, 2015 12:10
#12 One World Bracelet by REDA
Download Files
Jun 2, 2015 11:17
#11 One World Bracelet by REDA
Download Files
Jun 2, 2015 9:06
#10 One World Bracelet 1 by Irfan
Jun 2, 2015 8:14
#9 Connect2 by REDA
Download Files
May 31, 2015 21:05
#8 Connect2 by REDA
Download Files
May 31, 2015 20:55
#7 Connect by REDA
Download Files
May 31, 2015 17:43
#6 Barcelet for world by DesignerRavi
Download Files
May 30, 2015 13:17
#5 one world bracelet by abdillah yusuf
May 30, 2015 4:03
#3 One World Bracelet by Jarred_J
May 27, 2015 7:40
#1 One by JOJO
Download Files
May 26, 2015 21:56

Discussion

Showing last 20 comments - View All

Ridwan Sept

Designer

Fri, 03 Jul 2015 17:24:22 +0000
who the contest end but no winners announced? so good and cool contest

Ridwan Sept

Designer

Mon, 22 Jun 2015 07:27:51 +0000
any news? no more rated for the submissions?
Fri, 12 Jun 2015 04:14:44 +0000
And Water And soil is visible or not?
Fri, 12 Jun 2015 03:41:56 +0000
Hello,
want to ask you that, are there water and sand already injected ? or after purchasing anybody can injected manually??

Ridwan Sept

Designer

Thu, 11 Jun 2015 16:14:40 +0000
Please check out and give feedback for my first version model.

Best,
Ridwan S

jklic72

Buyer

Wed, 10 Jun 2015 19:46:17 +0000
THIS IS THE 2ND MAIN VERSION OF THE BRACELET WE WANT TO FOCUS ON (PLEASE REFER TO THE ATTACHMENTS “PURE STRENGTH - )

The 2nd type of design we’d like to focus on is based on the attached photos of the “Pure Strength” silicone bracelet. This is a reversible, two-tone silicone bracelet which has an elastic inner piece of silicone that stretches to slip on and off your wrist, and this elastic inner piece of flexible silicone actually runs through the main silicone segment of the bracelet that reads “pure strength”.

We’d like to see this same two-tone, reversible, elastic design made up of 7 separate segments, with the elastic inner piece of silicone running through all 7 segments.

One side of the bracelet would display 7 blue segments, each of which would have a small amount of water from one of the 7 seas. When you reversed the bracelet, the other side would display 7 brown segments, each of which would contain a small soil sample from one of the 7 continents.

And similar to the “Pure Strength” bracelet in the photos, each blue segment should have one of the names of the 7 seas engraved in the silicone in the same color brown as on the other side. Similarly on the brown, opposite side of the bracelet, each of the brown segments should have one of the names of the 7 continents engraved in the silicone with same color blue that’s on the opposite side.

We’d like to see the engraved lettering use a modern font like Helvetica Neue, or something similar.

7 Seas:
1. Arctic
2. N. Atlantic
3. S. Atlantic
4. N. Pacific
5. S. Pacific
6. Indian
7. Southern

7 Continents:
1. Asia
2. Africa
3. N. America
4. S. America
5. Antarctica
6. Europe
7. Australia

Please let us know if you have any follow-up questions about this proposed version…thanks for your patience and effort, we realize this is a lot of detailed instructions to take into account.

jklic72

Buyer

Wed, 10 Jun 2015 19:42:44 +0000
THIS IS THE 1ST MAIN VERSION OF THE BRACELET WE WANT TO FOCUS ON:

Hi Everyone. We have reviewed all the submitted designs to date and we first want to thank you all again for your creative, beautiful submissions! We have 2 weeks left in our contest and there are 2 types of designs we want to focus on for the rest of the contest.

The first one is actually based on Design in our contest. We like the single silicone bracelet made up of 14 round segments. Here are some specific suggested revisions for Design :

1.) We think Design in its current format is a little on the feminine side, and we want to make the bracelet appealing for as many people as possible (girls, boys, women, and men). We want the design to remain all silicone so it can be produced via injection molding, but we’d like to see if making the round segments smaller would make it look less feminine? We’d like to maintain in inner-circumference of 7.5 inches (19 cm). Perhaps there could be a thin connecting piece of the silicone that could act as a spacer in between the 14 round segments to achieve this adjustment?

2.) In addition to making the round segments smaller, we would like to some some different shades of brown and blue used in the segments to “tone down” the look and make it more appealing to both girls and boys.

3.) In Design it appears that the silicone is shiny and reflective. We would like to see the bracelet made with a more matted type of silicone, in part to make it more appealing to both genders.

4.) We would like to see the brown and blue segments alternating (i.e. blue, brown, blue, brown, etc)…as opposed to all the blue on one side and all the brown segments of the other side.

5.) Finally, we would like to see a version of the bracelet which incorporates engraved lettering in the silicone on each of the round segments. The 7 blue segments would be engraved with one of the 7 seas listed below. And the 7 brown segments would be engraved with one of the 7 continents listed below. We’d like to see the engraved lettering use a modern font like Helvetica Neue, or something similar.

7 Seas:
1. Arctic
2. N. Atlantic
3. S. Atlantic
4. N. Pacific
5. S. Pacific
6. Indian
7. Southern

7 Continents:
1. Asia
2. Africa
3. N. America
4. S. America
5. Antarctica
6. Europe
7. Australia

The 2nd main version of the bracelet we'd like to focus on will be posted below...

Ridwan Sept

Designer

Sun, 07 Jun 2015 18:48:18 +0000
please comments my entry, so I can improve that to meet with your wants.

Best Regards,
Ridwan S

Ridwan Sept

Designer

Sun, 07 Jun 2015 18:47:28 +0000
Are this https://www.cadcrowd.com/designs/large/1083_1433702592.jpg meet with yout wants?

Best Regards,
Ridwan S

jklic72

Buyer

Fri, 05 Jun 2015 15:54:57 +0000
Hi Antony. The bracelet is definitely meant to be unisex...and hopefully not just for kids either, although kids between 10 - 18 will be our initial target market.
Fri, 05 Jun 2015 12:56:41 +0000
Is it for girls or for boys?

jklic72

Buyer

Tue, 02 Jun 2015 18:49:25 +0000
Hi Ridwan. Thanks for your questions; I have provided answers in-line below.

1. So you don't want rounded shape design for the segments?
A1: Yes, rather than circular segments we are leaning towards using more oblong, American style football shaped segments.

2. If we use silicone material, it's means the bracelet has high elasticity? am I right?
A2: Yes. The bracelet will need to have some flexibility / elasticity in order for people to slip the bracelet on and off their wrists. The initial size of the bracelet (inner circumference) will be 7.5 inches or 19 cm.

3. Are you like power balance bracelet? are the design direction like that?
A3: I'm not sure exactly what the "power balance bracelet" is...can you send a link to see what you're referring to?

4. Can we use stainless or some metal material for the list or the list are made by silicone to?
A4: We would like the entire bracelet to be made of silicone.

5. Am I right the segment which injected water and soil made by silicone?
A5: Yes. We are planning on injecting / inserting small amounts of the water and soil samples in the 14 different segments of the bracelet at some point during the manufacturing process. We have not yet finalized the exact way this will be done yet so for now we are staying focused on getting our ideal design in place and then we will address the manufacturing process.

Please don't hesitate to let us know if you have any follow-up questions!

Ridwan Sept

Designer

Tue, 02 Jun 2015 16:44:22 +0000
I hace several questions :
1. So you don't want rounded shape design for the segments?
2. If we use silicone material, it's means the bracelet has high elasticity? am I right?
3. Are you like power balance bracelet? are the design direction like that?
4. Can we use stainless or some metal material for the list or the list are made by silicone to?
5. Am I right the segment which injected water and soil made by silicone?

Best Regards,
Ridwan S

Ridwan Sept

Designer

Tue, 02 Jun 2015 16:44:21 +0000
I hace several questions :
1. So you don't want rounded shape design for the segments?
2. If we use silicone material, it's means the bracelet has high elasticity? am I right?
3. Are you like power balance bracelet? are the design direction like that?
4. Can we use stainless or some metal material for the list or the list are made by silicone to?
5. Am I right the segment which injected water and soil made by silicone?

Best Regards,
Ridwan S

REDA

Designer

Tue, 02 Jun 2015 04:45:47 +0000
Hi jklic72,
Your opinion please..?
Regards
REDA

jklic72

Buyer

Sun, 31 May 2015 23:18:49 +0000
Hi Ridwan. So far we like design the most. But we would like to see the the soil and water segments in more of a football-type shape, as opposed to pure round circles (perhaps something closer to the football-like segments depicted in design ). The water and soil will be added to each bracelet segment during the manufacturing process. But you are correct we do not want the bracelet segments to be translucent. We will explain in the product packaging which segments contain water and soil from around the world. Please let us know if you have any additional questions? We look forward to seeing your design ideas!

REDA

Designer

Sat, 30 May 2015 15:22:05 +0000
Pretty Design Abdullah is an idea that I go to

Ridwan Sept

Designer

Sat, 30 May 2015 03:55:29 +0000
are we allowed to use stainless steel?

Ridwan Sept

Designer

Sat, 30 May 2015 03:55:03 +0000
so you don't want transculet material? So how the brackelet show the water and soil inside?

Ridwan Sept

Designer

Sat, 30 May 2015 03:44:25 +0000
Are the sample what you want is like the attached files?
And what method do you use for put the water and soil into the brackelet?

Similar Contests on Cad Crowd

Angled Keyboard Slide
The design requires a clean simple method with minimized parts and manufacturing costs. Product is low volume, 250 to 500 pieces per year. We are interested in minimizing capital tooling costs. Design challenge is to design a keyboard slide platform that sits at a 32.5 degree angle (see attached documents). Keyboard slide needs to easily lock in upward position when not in use, and needs to easily be released and slide downward when in use. The keyboard slide is on a cart platform, so when the cart is being moved around, if it gets bumped, we do not want the keyboard slide to dislodge and slip into the down position.
Bas Relief Panels
Create bas relief panel models to be CNC routed from MDF sheet. I will provide exact panel dimensions, sketches of the design and images to be modeled. Photos of similar examples attached.
Large 3D bookshelf backstop
Inspired by the historical visual progression of mainboards, we are looking for an innovative design to use as the back of a large shelving unit. We are looking for a design to go in a display case. The display case will then be used as a holder for glass shelves. Think of it almost like a glass bookshelf. Except, instead of the back being a cheap piece of board held on with tack nails like a shelf from IKEA, the back will be the design you come up with. Dimensions: 8ft wide 3ft high 1-3in deep The case is being used to display tech items. So we would like the design to reflect technology. Think mother board but on our scale. The original thought was to collect old motherboards, including ram and cpus. We were then going to lay them out on a 8x3 piece of plywood and glue them. Instead of this, we now want to get a design that a CNC machine can make. Material used: Wood and old metal. The design should induce a feeling of technological progression. So from left to right the design should transition from old circuit board tech, to current tech, to possible future tech (this part is open for interpretation) As an example, in the attached picture, the green part is what we want to replace with our 3D circuit board idea. Please note that the picture is just one from google and does not represent the actual shelf we are building The entire shelf will sit on top of a table, meaning that it will be at eye level for the average person.
The Gift Box
I'd like to have several tuck and fold boxes designed to look like elegantly wrapped gifts with nothing but the printed box and I would tie a ribbon around the box. The box in and of itself will have a glossy finish - but it should not look so much like a typical branded box - but should make the recipient feel like it is a beautiful gift. The use of simplicity and bold graphics to achieve a striking effect is key. It would be nice if the inside of the lid had a color and graphic when the user opens it. Inside the box will be a green and white marbled tissue paper (file attached). So the box needs to compliment this tissue paper and work with brand assets. I will be printing with Packlane.com so you can see how their box prints look. I have attached a sample of what a "tuck and fold" box looks like.
IEM True Wireless Earbud Design
We want a simple, firm, premium design for our wireless earbud with a case to charge them. It should represent all-in-one, solid, strong, high tech, formal, vintage style. Type: In Ear true wireless earbuds Target Audience: 20- 40 year olds Competitors: Enclosed in attachments Design: No wire, All-in one button, Volume Button Material: Plastic and Partially Metal Dimensions: Maximum 15 X 25 X 25mm Specification: Bluetooth: 4.1 Driver unit: Maximum 9mm Any software is acceptable, if STL format file can be provided. Any further questions, please feel free to comment.