I will design your electronic product, from schematic and PCB to working prototype
About this service
Complete electronic product design, from your idea or spec through schematic, PCB layout, firmware and working prototypes. I've been designing products for startups and companies in the US and Europe for many years, from small sensor boards to complex multi-board systems.
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 layers, high speed, RF and mixed signal
- Battery powered and low power devices, Li-ion charging, power path and protection
- Wireless with BLE, Wi-Fi, LoRa, cellular, GNSS and NFC, including antenna matching and tuning
- Power supplies, motor drives, sensors and data acquisition
- Embedded firmware on any microcontroller, bare metal or RTOS
- Prototypes built and tested in my own lab with VNA, spectrum analyzer and EMC pre-compliance gear
- Manufacturing files ready for JLCPCB, PCBWay or your own CM, plus support through certification
I work in Altium and KiCad and you get the native editable files. NDA no problem.
Send me what you have, even if it's only an idea, and I'll come back with how I'd approach it and a rough estimate.
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 layers, high speed, RF and mixed signal
- Battery powered and low power devices, Li-ion charging, power path and protection
- Wireless with BLE, Wi-Fi, LoRa, cellular, GNSS and NFC, including antenna matching and tuning
- Power supplies, motor drives, sensors and data acquisition
- Embedded firmware on any microcontroller, bare metal or RTOS
- Prototypes built and tested in my own lab with VNA, spectrum analyzer and EMC pre-compliance gear
- Manufacturing files ready for JLCPCB, PCBWay or your own CM, plus support through certification
I work in Altium and KiCad and you get the native editable files. NDA no problem.
Send me what you have, even if it's only an idea, and I'll come back with how I'd approach it and a rough estimate.
Complete electronic product design, from your idea or spec through schematic, PCB layout, firmware and working prototypes. I've been designing products for startups and companies in the US and Europe for many years, from small sensor boards to complex multi-board systems.
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 layers, high speed, RF and mixed signal
- Battery powered and low power devices, Li-ion charging, power path and protection
- Wireless with BLE, Wi-Fi, LoRa, cellular, GNSS and NFC, including antenna matching and tuning
- Power supplies, motor drives, sensors and data acquisition
- Embedded firmware on any microcontroller, bare metal or RTOS
- Prototypes built and tested in my own lab with VNA, spectrum analyzer and EMC pre-compliance gear
- Manufacturing files ready for JLCPCB, PCBWay or your own CM, plus support through certification
I work in Altium and KiCad and you get the native editable files. NDA no problem.
Send me what you have, even if it's only an idea, and I'll come back with how I'd approach it and a rough estimate.
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 layers, high speed, RF and mixed signal
- Battery powered and low power devices, Li-ion charging, power path and protection
- Wireless with BLE, Wi-Fi, LoRa, cellular, GNSS and NFC, including antenna matching and tuning
- Power supplies, motor drives, sensors and data acquisition
- Embedded firmware on any microcontroller, bare metal or RTOS
- Prototypes built and tested in my own lab with VNA, spectrum analyzer and EMC pre-compliance gear
- Manufacturing files ready for JLCPCB, PCBWay or your own CM, plus support through certification
I work in Altium and KiCad and you get the native editable files. NDA no problem.
Send me what you have, even if it's only an idea, and I'll come back with how I'd approach it and a rough estimate.
Complete electronic product design, from your idea or spec through schematic, PCB layout, firmware and working prototypes. I've been designing products for startups and companies in the US and Europe for many years, from small sensor boards to complex multi-board systems.
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 lay... read more
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 lay... read more
Complete electronic product design, from your idea or spec through schematic, PCB layout, firmware and working prototypes. I've been designing products for startups and companies in the US and Europe for many years, from small sensor boards to complex multi-board systems.
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 layers, high speed, RF and mixed signal
- Battery powered and low power devices, Li-ion charging, power path and protection
- Wireless with BLE, Wi-Fi, LoRa, cellular, GNSS and NFC, including antenna matching and tuning
- Power supplies, motor drives, sensors and data acquisition
- Embedded firmware on any microcontroller, bare metal or RTOS
- Prototypes built and tested in my own lab with VNA, spectrum analyzer and EMC pre-compliance gear
- Manufacturing files ready for JLCPCB, PCBWay or your own CM, plus support through certification
I work in Altium and KiCad and you get the native editable files. NDA no problem.
Send me what you have, even if it's only an idea, and I'll come back with how I'd approach it and a rough estimate. read less
What I can do for you:
- Architecture and part selection, block diagram and costed BOM
- Schematic and PCB layout, 2 to 12 layers, high speed, RF and mixed signal
- Battery powered and low power devices, Li-ion charging, power path and protection
- Wireless with BLE, Wi-Fi, LoRa, cellular, GNSS and NFC, including antenna matching and tuning
- Power supplies, motor drives, sensors and data acquisition
- Embedded firmware on any microcontroller, bare metal or RTOS
- Prototypes built and tested in my own lab with VNA, spectrum analyzer and EMC pre-compliance gear
- Manufacturing files ready for JLCPCB, PCBWay or your own CM, plus support through certification
I work in Altium and KiCad and you get the native editable files. NDA no problem.
Send me what you have, even if it's only an idea, and I'll come back with how I'd approach it and a rough estimate. read less
Service offer categories
Electronics Design Service
PCB Design Services
Electronic Prototyping and Design Services
Software & skills
Altium Designer
Antenna Design
Electronic Product Design
Embedded Systems
Firmware Development
Hardware Design
Hardware Prototyping
KiCad
PCB Design
Power Electronics
+7 more
Member since
October 2025
Languages
English
Avg. response time
1 hour
Senior Electronic Design Engineer | Analog, RF, Power & Embedded Firmware
Senior electronic design engineer with 20+ years of experience and 100+ product designs delivered for clients in more than 15 countries. I take products from concept to production: architecture, schematic, PCB layout, firmware, prototype assembly and bench testing, all done by me. You work directly with the engineer who designs your board, with no handoffs between team members.
WHAT I DESIGN
- Pr... read more
WHAT I DESIGN
- Pr... read more
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More similar services
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 2D & 3D Design services
- CAD Modeling services
- 2D & 3D Modeling services
- Engineering Design services
- Drafting services
- AutoCAD services
- Mechanical Design services
- 3D Models services
- Design for Manufacturing services
- 2D AutoCAD services
- Product Design services
- Rendering services
- SolidWorks services
- Mechanical Engineering services
- 3D Rendering services
- 3D Solidworks services
- 2D/3D AutoCAD services
- 2D & 3D Modeling Solidworks services
- 3D Printing Design services
- Mechanical Engineer services
- Design Engineer services
- Industrial Design services
- 3D Printing Modeling services
- Product Development services
- Product Design and Development services
- FEA services
- Prototyping services
- 3D Analysis and Design services
- DFM Design services
- BOM services
- Reverse Engineering services
- Simulation services
- Electrical Design services