Hire Local CAD Designers near Worcester, Western Cape

I have studied drafting for 3 years and specialize in the following fields: 3D rendering 3D modelling Sheet metal drawings CAD drawings Shop drawings etc. For more information, you can visit m... Read more

I have studied drafting for 3 years and specialize in the following fields: 3D rendering 3D modelling Sheet metal drawings CAD drawings Shop drawings etc. For more information, you can visit my website on www.madcaddesigns.co.za

B.Eng at NWU South Africa. Was part of NWU Solar Car Team and I was a driver myself at the World Solar Challenge in 2015. I am very sharp with CAD and you will not be disappointed.

B.Eng at NWU South Africa. Was part of NWU Solar Car Team and I was a driver myself at the World Solar Challenge in 2015. I am very sharp with CAD and you will not be disappointed.

At AJ Studios, our passion for precision drives us in the realm of 3D Modeling & Design. Our expertise spans across multiple sectors, with a particular focus on architectural design, gaming, and corpo... Read more

At AJ Studios, our passion for precision drives us in the realm of 3D Modeling & Design. Our expertise spans across multiple sectors, with a particular focus on architectural design, gaming, and corporate projects. We are artisans of the virtual world, where the boundary between the real and the rendered is continuously blurred by our commitment to lifelike accuracy. Our dedication is unwavering when it comes to achieving the pinnacle of realism and exceeding our clients' expectations. We don't just strive for satisfaction; we push the limits of imagination to ensure that our clients are not just content but truly captivated by the worlds we create for them

Graphic design (all aspects) architectural 3d rendering floor plans house design Presentations Power Point Logo designs Digital Art

Graphic design (all aspects) architectural 3d rendering floor plans house design Presentations Power Point Logo designs Digital Art

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

I approach design of parts very logically and with the aid of my engineering knowledge. Practical experience in designing parts for traditional manufacturing processes and 3D printing.

3D Plastic injection mould designer for all possible product requirements. 3D Assemblies Drawings. Project leader for PLC driven custom machines building Experience May 2000 – April 2001 Alplas Pla... Read more

3D Plastic injection mould designer for all possible product requirements. 3D Assemblies Drawings. Project leader for PLC driven custom machines building Experience May 2000 – April 2001 Alplas Plastics, C.T. S.A.

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months... Read more

I am a freelance Maya modeler. Design and creation has always been a passion of mine. I have completed a three year course in animation at Center for Fine Art Animation and Design. I have nine months of experience in automation systems, in which my main focus was on 3D interface systems. I thoroughly enjoy working on projects that require me to stretch and expand my skills to new limits. I am always looking for a way to continue growing the knowledge in my field and gaining new skills.

My professional highlights in each field: Architectural - Eros Airport Terminal & Hangar, Namibia Interior - Pepper Club Hotel, Cape Town Mechanical - Lug Descrambler, M&M, Cape Town Process - Darlin... Read more

My professional highlights in each field: Architectural - Eros Airport Terminal & Hangar, Namibia Interior - Pepper Club Hotel, Cape Town Mechanical - Lug Descrambler, M&M, Cape Town Process - Darling Brew Craft Beer Plant, Darling

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

3D Solid Parts/drawings Sheetmetal DXF files 2D to 3D Edit 3D Solid parts DXF for plasma cutting New designs

. Fast design and drawing skills in Solidworks, currently running 2020 can work in lower years . Design from concept to full assembly and manufacturing drawings. - Concept Design, - Product Design,... Read more

. Fast design and drawing skills in Solidworks, currently running 2020 can work in lower years . Design from concept to full assembly and manufacturing drawings. - Concept Design, - Product Design, - Industrial Design, - Mechanical Design, - Rendering, - Strength Analysis, - Technical Product Documentation - 3D Printing and prototyping

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie... Read more

I'm a experienced and passionate design engineer & draughtsman with a demonstrated history of working in the Automotive, Architecture and Design Industry. Skilled in Tekla Structures, AutoCAD, Caddie 9 & 18, SolidWorks, Siemens NX , SolidEdge, Artec studio, GeoMagic Design, KeyShot and GeoMagic Design X.

As a freelance 3D modeller, I have worked independently on many design projects including jewellery, furniture, prosthetics, and motorcycle parts, creating production-ready 3D models, final renders, di... Read more

As a freelance 3D modeller, I have worked independently on many design projects including jewellery, furniture, prosthetics, and motorcycle parts, creating production-ready 3D models, final renders, dimensioned layouts, and reports or explainer documents for manufacturing. My many years of experience in silversmithing have given me a thorough understanding of small-scale metal work. My scientific and mathematical background have led me to favour parametric and algorithmic design tools (specifically Grasshopper), which allow me to create complex organic patterns and forms. I am a fast learner and excellent problem-solver, with a strong design sense and wide range of interests. I also tutor students in how to use these tools

Efficiency and optimization focused CAD Designer with experience creating fully parametric, optimized for manufacturing ready designs and production drawings. With over 7 years experience designing p... Read more

Efficiency and optimization focused CAD Designer with experience creating fully parametric, optimized for manufacturing ready designs and production drawings. With over 7 years experience designing products of different niches, I have become a versatile CAD designer with expertise in multiple sectors including sheet metal, fibre laser cutting, sheet metal bending, CNC milling and CNC turning as well as 3D printed enclosures for outdoor applications. Software that I've worked with: - Autodesk Inventor - Autodesk Inventor CAM Suite - AutoCAD - Autodesk Fusion 360 - Ultimaker Cura - Keyshot Tasks / roles that I can fulfil: - Drafter / Drafting Tasks - Product Design - Sheet metal and bending designer - Reverse Engineer / Reverse Engineering - CAD Design - DFM / Design For Manufacturing - Design for 3D printing - Design for CNC Machining and CNC Turning - Design for Injection Moulding I was involved in: - Creating flat patterns for laser cutting, - Bend drawings for the bending team, - Assembly instructions for the assemblers - Steel tube cut list's for the manufacturing team, - Designing parts and then programming and running them on our CNC milling machine, - Designing optimised parts for 3D printing - Keeping an eye open for design optimisations in general I refined my skills further with my time working hands on with the production process, seeing and deeply understanding the processes involved in building your final product. This has taught me to always imagine the assembly process and keep an eye out for any design choices that could make manufacturing more difficult or downright impossible. My hands on experience comes from spending time working on a Sheet Metal Fibre laser, producing the flat parts for assembly as well as hand on assembly in an IoT device that was manufactured using 3D printing.

A dedicated and results-driven CAD Design, CAM programming and CNC Engineer with a strong background in software and hardware integration across Information Technology, Telecoms, and Industrial Engine... Read more

A dedicated and results-driven CAD Design, CAM programming and CNC Engineer with a strong background in software and hardware integration across Information Technology, Telecoms, and Industrial Engineering sectors. Highly skilled in utilizing AutoCAD and other design tools to enhance product development and improve efficiency in mechanical and industrial designs. Passionate about leveraging software and hardware solutions to optimize customer experience and operational performance. - Proficient in writing software programs, debugging, and performing statistical analysis to drive improvements in product functionality and performance. - Extensive experience with Telecoms GSM/UMTS Circuit Switched Core Network software, parameter configuration, roaming, and maintenance, particularly with Ericsson and Huawei systems. - Expertise in CNC Industrial Engineering implementations, microcontroller programming, and sensor-based software applications. - Proven project management experience on both national and international levels, successfully leading Telecoms core network projects, including platform startups, network testing, and integrations across MTN Nigeria, MTN Cameroon, and MTN South Africa. Skilled at collaborating with cross-functional teams to deliver high-quality results and continuously seeking opportunities to apply knowledge and technical expertise to drive innovation and success in CAD design and engineering projects.

Im 20 years old.Im currently a student at Academy IDT studying multifunctional draughting.I use Autodesk software (Solidworks,Autocad,Revit). I would say out of personal experience that Im good at civ... Read more

Im 20 years old.Im currently a student at Academy IDT studying multifunctional draughting.I use Autodesk software (Solidworks,Autocad,Revit). I would say out of personal experience that Im good at civil draughting,Architectural draughting and also 3D modeling.I have a great passion for Architecture since highschool thats why I have decided to start freelancing to build my portfolio.I also love designing andI love working with people.With this skill set I think that I'll be your perfect candidate for the job.Im fast,accurate and never miss a deadline.

Product designer, love challenges. I constantly think design when I am at work or at home. I love improving products or designing new products especially if they make a difference.

Product designer, love challenges. I constantly think design when I am at work or at home. I love improving products or designing new products especially if they make a difference.

We're a small team of CAD specialists who make two promises: 1 Simple, and 2 Fast We've worked on CAD projects of all shapes, sizes and complexities. We've got tonnes of experience working with... Read more

We're a small team of CAD specialists who make two promises: 1 Simple, and 2 Fast We've worked on CAD projects of all shapes, sizes and complexities. We've got tonnes of experience working with clients to deliver what they're looking for. The smallest project we've been a part of is: 2000 SqFt The largest project we've been a part of is: 26.5m SqFt We've seen it all and we're excited to hear what we can do for you.

My objective is to secure employment where my technical experience, flair for visualization, and skills across various platforms can be utilized to offer an exceptional and professional service, resul... Read more

My objective is to secure employment where my technical experience, flair for visualization, and skills across various platforms can be utilized to offer an exceptional and professional service, resulting in tangible results

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3... Read more

I have worked in boat yards and boat design offices for many years, and have acquired extensive experience in luxury GRP/CFRP catamarans and sheet metal aluminium work boats. I am highly skilled in 3D CAD (Autodesk Inventor and Autodesk Fusion 360) and am proficient in working from and producing 2D AutoCAD drawings. I also have experience in rendering and simple animations of both the finished boat or custom stand-alone components and systems. My previous structural projects have included a full 3D model, drawing pack and nested cut files for a 15m ocean research catamaran. As well as numerous custom components where an off-the-shelf option was not suitable. While I am not a naval architect, I have partnered with a company that can provide all the necessary structural calculations. Plug and mould design for GRP boats is another area I particularly enjoy, and have extensive experience in. In addition to design, I am highly skilled at the communication and collaboration of all aspects of the design process. This has been aided by cloud-based CAD software such as Fusion 360, which facilitates the sharing of information and keeping track of design changes in real time. In addition to standard boat design work I particularly enjoy smaller custom R&D projects that require more creative solutions within a given set of parameters. My approach to design is one of simplification, and always working within the limitations of the project with regard to materials and fabrication techniques. The ideal design is usually the simplest solution that can satisfy all criteria.

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and becom... Read more

Component Design & Manufacture We can take your concept ideas through the full development process to final production. Using state of the art modelling we can quickly evaluate new concepts and become a fully integrated partner in your development project. Project Engineering Our involvement is entirely centered around the clients requirements. We are able to handle the product from start to finish Reverse Engineering Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. One type of reverse engineering involves producing 3-D images of manufactured parts when a blueprint is not available in order to re-manufacture the part. Re-Engineering Re-engineering of the existing engineered components and systems. Modifications of the existing design are done in order to enhance the look & feel, improve material usage and productivity.

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Art... Read more

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Arts Gallery (AVA) in Cape Town as well as at the University of Johannesburg Art Gallery, in addition to featuring in the Visi Magazine.

I am a young Mechanical Engineer with a passion for engineering design. Through a number of academic and personal design projects, I have gained and applied good technical experience in areas such as... Read more

I am a young Mechanical Engineer with a passion for engineering design. Through a number of academic and personal design projects, I have gained and applied good technical experience in areas such as mechanism design, systems engineering, control systems, engineering management, product design, mechatronic design, and environmental engineering. I am excited to use the knowledge that I have gained in solving real-world problems. Although I design medical devices for the growing South African healthcare sector, I wish to improve the skills that I don't use as much in this profession. This means staying sharp with tools such as CAD (Autodesk Inventor), Scientific Computing (Matlab & Python), and Design for Additive Manufacturing (Inventor & Cura)

I have been designing jewellery using CAD software for the past 10 years. I have worked on bespoke and mass production projects using 3D printers. My experience has taught me the casting and manufactu... Read more

I have been designing jewellery using CAD software for the past 10 years. I have worked on bespoke and mass production projects using 3D printers. My experience has taught me the casting and manufacture process of various types of jewellery. I use, Rhinoceros, Magics, Matrix, Keyshot and Vray for producing 3D models and photo-realistic renderings. Please contact me for more details

I am a mechanical engineer who studied at Stellenbosch University in South Africa. I have experience in product design in the agricultural and weapons manufacturing sector.

I am a mechanical engineer who studied at Stellenbosch University in South Africa. I have experience in product design in the agricultural and weapons manufacturing sector.

I'm a multidisciplinary draughter with Solidworks, Sketchup ,Revit and AutoCad experience. I have 2 years on the job training (Practical experience). I studied at Academy IDT and just enrolled at AIE... Read more

I'm a multidisciplinary draughter with Solidworks, Sketchup ,Revit and AutoCad experience. I have 2 years on the job training (Practical experience). I studied at Academy IDT and just enrolled at AIE for my Architectural Technologist certification. I am currently working on restoring an old house and giving it a modern touch. In the last 2 years I've done a wide variety of things from designing showers and boats to American shutters , wine racks , balustrading and even a Helicopter garage with some furniture design here and there. I don't just design I also Manufacture my designs.

I am a South African architectural & technical designer with over 20 years' experience in corporate, commercial & residential projects. I also own / maintain a few CAD related websites and android app... Read more

I am a South African architectural & technical designer with over 20 years' experience in corporate, commercial & residential projects. I also own / maintain a few CAD related websites and android apps. Please let me know if I can be of assistance - I would love to help with your next project!